Community discussions

MikroTik App

Search found 2509 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 9
by plisken
Mon Jan 31, 2022 7:27 pm
Forum: Announcements
Topic: v7.2rc2 and v7.2rc3 is released!
Replies: 222
Views: 85223

Re: v7.2rc2 is released!

Still no ZeroTier for mips...
This would be of great value indeed. ZeroTier should not be missing on all Mikrotik routers. Mikrotik you are already doing a wonderful job do your best and implement ZeroTier on all routers starting with mipsbe.
by plisken
Thu Dec 16, 2021 3:37 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7.1rc2

Sometimes I can login via Zerotier and sometimes not.
This is definitely a bug in Mikrotik ZeroTier. I consider this not reliable.
There is still work to be done.
by plisken
Thu Dec 16, 2021 3:17 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7.1rc2

Image
This is what I see after a few minutes.
The Zerotier interface is gone and repositioned with ether1 or unknow.
After a reboot the zerotier interface returns but not always.
by plisken
Thu Dec 16, 2021 2:45 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7.1rc2

Check your firewall rules again to see if they are correct. It changes interface for me. First they had the in-interafce zerotier1 and then ether1.
by plisken
Thu Dec 16, 2021 11:18 am
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7.1rc2

Thanks for your quick reply but I did this. But the zerotier interface disappears so that the in-interface zerotier1 cannot be set as in-interface. I use the CLI zerotier enable zt1 zerotier/interface add network=...... instance=zt1 and i set the firewall as like the wiki. If i try to login with Zer...
by plisken
Thu Dec 16, 2021 9:49 am
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7.1rc2

I have a problem with ZeroTier.
In the wiki are two firewall rules and the in-interface=zerotier1
This interface zerotier1 cannot be found and in place the interface zerotier1 it switches to ether1
What can I do to allow Zerotier traffic?
Is this a bug?
thanks
by plisken
Wed Dec 15, 2021 4:45 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 224755

Re: v7.1 is released!

Why only Zerotier on ARM architecture?
by plisken
Fri Nov 26, 2021 1:29 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 309557

Re: ZeroTier added to RouterOS v7rc2

Why not, you can install iPhone Zerotier client and then join your home LAN with this.
Is zerotier safe? how works zerotier?
by plisken
Wed Nov 17, 2021 6:56 pm
Forum: General
Topic: Block torrent downloads
Replies: 10
Views: 8965

Re: Block torrent downloads

Thanks for your help, but there's nothing useful with it. Layer7 protocol no longer works at https.
Maybe it's good that I look up which PtP connections are made.
by plisken
Wed Nov 10, 2021 7:01 pm
Forum: General
Topic: Block torrent downloads
Replies: 10
Views: 8965

Block torrent downloads

Hello guys, what is the best way to block torrent traffic? Since L7 has no effect how can this traffic be blocked.
I want to prevent downloading movies.
Please your advice.
by plisken
Fri Oct 29, 2021 9:30 am
Forum: RouterOS beta
Topic: v7.1rc5 [development] is released!
Replies: 167
Views: 48600

Re: v7.1rc5 [development] is released!

Anyone else having trouble creating certificates in RouterOS v7.1rc5?
I create a CA certificate but cannot sign it.
by plisken
Mon Oct 04, 2021 9:33 am
Forum: Beginner Basics
Topic: Disable all unused interfaces with one command.
Replies: 5
Views: 1468

Re: Disable all unused interfaces with one command.

Thank you all for your reply.
This helped me.
by plisken
Sun Oct 03, 2021 9:51 pm
Forum: Beginner Basics
Topic: Disable all unused interfaces with one command.
Replies: 5
Views: 1468

Disable all unused interfaces with one command.

Hello,
How do I disable all unused interfaces with one command?
I searched the forum but found nothing.
Thanks for your reply
by plisken
Thu Sep 09, 2021 9:36 pm
Forum: RouterOS beta
Topic: 7.1 rc2 downgrade impossible BUG
Replies: 1
Views: 1066

Re: 7.1 rc2 downgrade impossible BUG

Downgrade to RouterOS 6 is recommended with the netinstall procedure.
Greatings
by plisken
Thu Sep 09, 2021 9:34 pm
Forum: RouterOS beta
Topic: EoIP 7.1RC2 to 7.1RC2 Not working [SOLVED]
Replies: 3
Views: 3039

Re: EoIP 7.1RC2 to 7.1RC2 Not working [SOLVED]

Some CHR routers have problems with the 7.1rc2.
Can't you try this with real routers instead of virtual machines.
Let us know what result you achieved?
Greatings
by plisken
Thu Sep 09, 2021 9:31 pm
Forum: RouterOS beta
Topic: routeros 7 hAP ac2 wave2 special installer req
Replies: 4
Views: 3349

Re: routeros 7 hAP ac2 wave2 special installer req

Hello, not all the routers are compatibel with that. As of the release of RouterOS 7.1rc1, this means it is compatible with 4 devices: hAP ac³ (non-LTE) Audience* Audience LTE6 kit* RB4011iGS+5HacQ2HnD** *Please note that the wifiwave2 package is not compatible with CAPsMAN. **Note that the 2.4GHz w...
by plisken
Mon Apr 05, 2021 5:56 pm
Forum: Beginner Basics
Topic: How to add new routing table on ROS v6
Replies: 4
Views: 5696

Re: How to add new routing table on ROS v6

Go to IP -> routes and rules. Make a new routing mark.
See the screenshot.
by plisken
Mon Mar 15, 2021 8:20 am
Forum: Beginner Basics
Topic: Need Input For SOHO Upgrade
Replies: 11
Views: 1625

Re: Need Input For SOHO Upgrade

You can never rely on data throughput alone. You must also take into account the firewall rules, queues, mangle rules and so on. All of these must also be taken into account when determining the router. In terms of throughput the 3011 will definitely handle a 1gig connection and has lots of RAM, no ...
by plisken
Sun Mar 14, 2021 6:23 pm
Forum: Beginner Basics
Topic: Need Input For SOHO Upgrade
Replies: 11
Views: 1625

Re: Need Input For SOHO Upgrade

The switch can never match the 3011. I always place a router and switch separately.
Never a combined router and switch in one unit.One addition you can make is to buy an RB4011 and use it together with a CRS326. This is my opinion.
by plisken
Fri Jan 22, 2021 1:28 pm
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Re: Send one email and stop

Hello Eworm, when I find the time I will dig deeper into your scripts.
I am interested in these scripts and want to understand them.
Thanks
by plisken
Fri Jan 22, 2021 1:19 pm
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Re: Send one email and stop

Hello Che, many thanks for this explanation.
@Eworm thanks for your answer too.
by plisken
Fri Jan 22, 2021 10:23 am
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Re: Send one email and stop

There is nothing wrong with your scripts but I don't understand them.
I have little experience with scripts.
This is not your fault. I would like to know the background how this works.
I appreciate your help.
by plisken
Fri Jan 22, 2021 7:58 am
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Re: Send one email and stop

Hello Che, thanks for your reply

If I understand correctly.
Once I have started that script, will the monitoring continue without a scheduler?
This once I start the script manually? Is that correct?
by plisken
Fri Jan 22, 2021 2:02 am
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Re: Send one email and stop

Sorry but this does not help me.
I know there is a way to send an email once with the same error.
But I lost the code. This was given to me by Rextended.
by plisken
Thu Jan 21, 2021 9:07 pm
Forum: Scripting
Topic: Send one email and stop
Replies: 12
Views: 3886

Send one email and stop

I have this script running every 30 seconds with scheduler. I repeatedly receive an email every 30 seconds. Can I ensure that I only receive one email if the router is too hot? Otherwise I will be spammed with the same error. Please advise :log info ("$[/system health get temperature]") :i...
by plisken
Wed Jan 20, 2021 1:25 pm
Forum: Scripting
Topic: Send email if PSU fails
Replies: 8
Views: 2357

Re: Send email if PSU fails

This is precisely the problem. I am looking for a fully functioning script.
by plisken
Wed Jan 20, 2021 11:50 am
Forum: Scripting
Topic: Send email if PSU fails
Replies: 8
Views: 2357

Re: Send email if PSU fails

I made an attempt, but the question marks are probably going wrong. Who can help me :log info ("$[/system health get psu1-state]") :if ([/system health get psu1-state]?????) do={/tool e-mail send to="me@somewhere.net" subject=[/system identity get name] body=("PSU-state is d...
by plisken
Wed Jan 20, 2021 8:01 am
Forum: Scripting
Topic: Send email if PSU fails
Replies: 8
Views: 2357

Re: Send email if PSU fails

Thanks for the reply, but what is the complete email script. I have no experience writing scripts. And this is my limitation.
Can you show me the full email script please.
by plisken
Tue Jan 19, 2021 3:35 pm
Forum: Scripting
Topic: Send email if PSU fails
Replies: 8
Views: 2357

Re: Send email if PSU fails

Nobody can help? The people of Mikrotik also not?
by plisken
Wed Jan 13, 2021 9:17 am
Forum: Scripting
Topic: Mail DHCP-leases
Replies: 3
Views: 1312

Re: Mail DHCP-leases

Thank you for your response, I am not that experienced in script creation.
Can you improve the full script here and put it online please? Thanks.
by plisken
Tue Jan 12, 2021 10:00 pm
Forum: Scripting
Topic: Mail DHCP-leases
Replies: 3
Views: 1312

Mail DHCP-leases

I want to improve this script by having the DHCP servers automatically recognized. So that I don't have to enter DHCP1. For clarity "ip dhcp server lease find where server = dhcp1" I want all DHCP servers to be recognized so that I have the correct number of users and the appropriate DHCP ...
by plisken
Mon Jan 11, 2021 7:00 pm
Forum: Scripting
Topic: Send email if PSU fails
Replies: 8
Views: 2357

Send email if PSU fails

Hi, I am looking for a script that sends an email if one of the PSU's fails (CCR 1036)
Who can help me with this?
by plisken
Fri Dec 25, 2020 2:51 pm
Forum: Scripting
Topic: Getting wireless interface rx signal-strength
Replies: 14
Views: 9651

Re: Getting wireless interface rx signal-strength

I know this is an old topic but no less important for that.
I would like to email the signal from my point to point link daily. Can you make a script for this?
regards
by plisken
Fri Dec 25, 2020 1:08 pm
Forum: Beginner Basics
Topic: Question about CCR1009-7G-1C-1S+PC
Replies: 2
Views: 678

Re: Question about CCR1009-7G-1C-1S+PC

The answer to the first question.
Everything depends on the capabilities of the ISP.
Can you connect directly to an SFP on the modem of your ISP?
On Mikrotik you can connect with PPPoE or a DHCP client ore with a static IP-adres.
The second question, you can turn off the LCD function.
by plisken
Fri Dec 25, 2020 10:08 am
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 295
Views: 127556

Re: v6.48 [stable] is released!

*) branding - fixed LCD logo loading from new style branding package; How can we add a LCD logo? It would be great to add a custom image with our company logo and the Router-Name. Go to your Mikrotik account, At the bottom you see other. Click on branding maker. Here you can add your logo. Then you...
by plisken
Fri Dec 04, 2020 8:59 pm
Forum: Beginner Basics
Topic: UPnP not forwarding ports
Replies: 4
Views: 1420

Re: UPnP not forwarding ports

I don't see the problem because UPnP is temporarily enabled.
by plisken
Fri Dec 04, 2020 6:06 pm
Forum: Beginner Basics
Topic: Issues with Mikrotik hAP AC2
Replies: 17
Views: 6167

Re: Issues with Mikrotik hAP AC2

I recommend using Winbox to make better configurations.
If you use the 5 GHz. radio cannot find this is possible because you have not set the country settings.
Or the radio is in client mode.
by plisken
Fri Dec 04, 2020 5:34 pm
Forum: Beginner Basics
Topic: Is it possible to install Userman and Hotspot on SD-Card?
Replies: 1
Views: 695

Re: Is it possible to install Userman and Hotspot on SD-Card?

You can save the usermanager database on external storage.

example: tool user-manager database set db-path=disk1/cache-n-db/user-manager
by plisken
Fri Dec 04, 2020 5:27 pm
Forum: Beginner Basics
Topic: Rb1100
Replies: 1
Views: 464

Re: Rb1100

Try to connect with the winbox program and try to connect with the MAC-address.
by plisken
Fri Dec 04, 2020 5:03 pm
Forum: General
Topic: Cant connect to 192.168.88.1
Replies: 4
Views: 3153

Re: Cant connect to 192.168.88.1

Use Winbox so you can connect with MAC-address
by plisken
Fri Dec 04, 2020 4:49 pm
Forum: General
Topic: Bug in CRS326-24S+2Q+ with QSFP breakout cable?
Replies: 1
Views: 973

Re: Bug in CRS326-24S+2Q+ with QSFP breakout cable?

Try to set manuall the interface speed.

Have you try RouterOS 6.47.7 ?
by plisken
Fri Dec 04, 2020 4:44 pm
Forum: General
Topic: Netinstall doesn't work.
Replies: 2
Views: 764

Re: Netinstall doesn't work.

If there are several network ports on the PC, disable them.
Except for the port that is connected to the Mikrotik router.
As said before, turn off the firewall. try in a different subnet.
Run netinstall as administrator.
by plisken
Fri Dec 04, 2020 3:35 pm
Forum: Beginner Basics
Topic: UPnP not forwarding ports
Replies: 4
Views: 1420

Re: UPnP not forwarding ports

See this tutorial about UPnP in Dutch, but everything becomes clear during the configuration.
https://www.youtube.com/watch?v=XtwxFmWGDgE&t=137s
by plisken
Fri Dec 04, 2020 3:33 pm
Forum: Beginner Basics
Topic: RouterBOARD Emulator?
Replies: 2
Views: 8437

Re: RouterBOARD Emulator?

GNS3 is a good program to run CHR
https://www.gns3.com/
by plisken
Fri Dec 04, 2020 3:28 pm
Forum: Beginner Basics
Topic: PCQ queue is better than without any queue?
Replies: 5
Views: 2346

Re: PCQ queue is better than without any queue?

PCQ will distribute the bandwidth evenly among all users.
And indeed if no PCQ are configured it could be that one user will run with all bandwidth.
Here you see a configuration per subnet. In Dutch but I think this will help you.
https://www.youtube.com/watch?v=tpRdX9p-u9c&t=358s
by plisken
Fri Dec 04, 2020 3:18 pm
Forum: Beginner Basics
Topic: Winbox over Serial Port?
Replies: 2
Views: 914

Re: Winbox over Serial Port?

No this is no possible
by plisken
Fri Nov 27, 2020 5:23 pm
Forum: Announcements
Topic: v6.47.8 [stable] is released!
Replies: 54
Views: 31305

Re: v6.47.8 [stable] is released!

Mikrotik has work to do

Back to RouterOS 6.47.7

On the RB1100 1100AHx4 dude edition everything looks good
by plisken
Fri Nov 27, 2020 9:19 am
Forum: Announcements
Topic: v6.47.8 [stable] is released!
Replies: 54
Views: 31305

Re: v6.47.8 [stable] is released!

System health does not work properly.

CCR 1036 nothing to see
CRS309 only CPU temp
CRS326 only CPU temp
CRS 328 nothing to see
by plisken
Mon Nov 23, 2020 3:45 pm
Forum: Beginner Basics
Topic: /dude missing
Replies: 7
Views: 1860

Re: /dude missing

Hello, this is the answer from Mikrotik.

Thank you for contacting MikroTik Support.

The support will be added in future ROS releases. Please keep checking for changelogs.

Greatings
by plisken
Sun Nov 22, 2020 3:16 pm
Forum: General
Topic: Mangle rules for all download and upload speed
Replies: 6
Views: 5310

Re: Mangle rules for all download and upload speed

Thanks for your reply
I want to determine the total down and upload to the internet for one subnet.
To then configure PCQ with the created total down and upload rule as parent.
by plisken
Sun Nov 22, 2020 9:02 am
Forum: Beginner Basics
Topic: /dude missing
Replies: 7
Views: 1860

Re: /dude missing

If you know anything let me know if you want.
by plisken
Sat Nov 21, 2020 4:19 pm
Forum: Beginner Basics
Topic: /dude missing
Replies: 7
Views: 1860

Re: /dude missing

I think the CCR2004-1G-12S + 2XS does not support the dude.
by plisken
Fri Nov 20, 2020 10:48 am
Forum: General
Topic: Mangle rules for all download and upload speed
Replies: 6
Views: 5310

Re: Mangle rules for all download and upload speed

Is this correct? /ip firewall mangle add action=mark-connection chain=prerouting comment=upload-conn-all-bandwidth in-interface-list=WAN new-connection-mark=upload-full-bandwidth-conn passthrough=yes src-address=0.0.0.0/0 add action=mark-connection chain=postrouting comment=download-conn-all-bandwit...
by plisken
Fri Nov 20, 2020 9:34 am
Forum: General
Topic: Mangle rules for all download and upload speed
Replies: 6
Views: 5310

Re: Mangle rules for all download and upload speed

Thanks, i do that and try it out.
by plisken
Thu Nov 19, 2020 1:18 pm
Forum: General
Topic: Mangle rules for all download and upload speed
Replies: 6
Views: 5310

Mangle rules for all download and upload speed

Hello, I want to limit the total download and upload speed and want to start marking the traffic. Is this the correct method that I am showing here? If not can you help me please /ip firewall mangle add action=mark-packet chain=prerouting comment=upload-all-bandwidth in-interface-list=WAN new-packet...
by plisken
Thu Nov 19, 2020 1:06 pm
Forum: Beginner Basics
Topic: Internet access not available
Replies: 15
Views: 2079

Re: Internet access not available

Can you ping to 8.8.8.8 from the SXT?
Provide more detailed information pleace
by plisken
Tue Nov 17, 2020 12:30 pm
Forum: Beginner Basics
Topic: /dude missing
Replies: 7
Views: 1860

Re: /dude missing

What do you see on the main menu with Winbox?
by plisken
Tue Nov 03, 2020 9:55 pm
Forum: Beginner Basics
Topic: Unable access IP camera from external device
Replies: 2
Views: 576

Re: Unable access IP camera from external device

Hello, You have to forward two ports. The RTSP port is usually 554 which stands for real time streaming protocol and the http port usually 80 or 443.
I hope to have helped you.
Greatings
by plisken
Tue Nov 03, 2020 9:38 pm
Forum: Beginner Basics
Topic: How it's possible to hide a RB from neighbours
Replies: 2
Views: 797

Re: How it's possible to hide a RB from neighbours

This is a solution, in dutch but see the tutorial.

https://youtu.be/tJarB5yaGeo?t=323

Let me know if your problem is solved
by plisken
Tue Nov 03, 2020 9:09 pm
Forum: Beginner Basics
Topic: Mikrotik router
Replies: 3
Views: 705

Re: Mikrotik router

What is your question actually. Ask a clear question if you want.
by plisken
Thu Oct 29, 2020 9:44 pm
Forum: General
Topic: Router on a stick with CRS-3xx serie
Replies: 1
Views: 643

Router on a stick with CRS-3xx serie

How to configure router on a stick on the CRS 326 ore another CRS3xx serie device.
I want to setup switch1-cpu but i can't find it.
What is the correct configuration for that?
by plisken
Sun Sep 20, 2020 12:27 pm
Forum: RouterOS beta
Topic: After installing ROS 7.1beta2
Replies: 3
Views: 2598

After installing ROS 7.1beta2

I installed ROS 7.1beta2 on two RB750Gr3
If i change the name of ether2 ore another ethernet interface the router reboot automatically.
System log
System, error critical: router rebooted because some critical program crashed.
by plisken
Thu Aug 06, 2020 4:37 pm
Forum: General
Topic: PoE-Cut-Off randomly
Replies: 2
Views: 1473

Re: PoE-Cut-Off randomly

Have you looked at the power consumption of the Rocket-M5?
Maybe the power box cannot handle this.
Is it possible to power the powerbox with the power jack?
Maybe this solves your problem.
by plisken
Wed Jul 29, 2020 4:32 am
Forum: Beginner Basics
Topic: Hardware offload
Replies: 4
Views: 5781

Re: Hardware offload SOLVED

Thanks for the many answers. I wanted to use rstp to get redundancy. But without the hardware offload I still prefer other Mikrotik routers. Since I want the data traffic to be handled via layer2. @ Vecernik87 I have been using Mikrotik routers for years and have had these devices for years. But I o...
by plisken
Tue Jul 28, 2020 4:46 pm
Forum: Beginner Basics
Topic: Hardware offload
Replies: 4
Views: 5781

Hardware offload

Why am I not seeing hardware offload on the
RB750Gr3. If I create one bridge and I put all interfaces in this bridge I don't see HW. Does it not support HW Offload?
RouterOS 6.47.1
by plisken
Tue Jul 21, 2020 5:08 pm
Forum: Beginner Basics
Topic: Advanced Mode error
Replies: 1
Views: 738

Re: Advanced Mode error

In the winbox program on the left corner
click on tools and select legacy mode.
by plisken
Sat Jun 20, 2020 6:19 pm
Forum: Beginner Basics
Topic: CRS312 Issues
Replies: 20
Views: 5150

Re: CRS312 Issues

For configure your CRS use winbox, quickset have many problems.
by plisken
Tue Jun 16, 2020 11:28 pm
Forum: Beginner Basics
Topic: Netinstall on mAP2nD don't work
Replies: 0
Views: 775

Netinstall on mAP2nD don't work

I am well known with the Mikrotik routers and have performed netinstall with many Mikrotik routers. However, this will not work with the mAP2nD. No firewall on the PC, second network card disabled. Etc. But the netinstall procedure will not work. Anyone have an idea or the same experience with that?...
by plisken
Tue Jun 16, 2020 10:46 pm
Forum: Beginner Basics
Topic: WinBox - Connect To: MAC addrerss
Replies: 2
Views: 1104

Re: WinBox - Connect To: MAC addrerss

Give the networkcard on your PC a static IP-adres like 192.168.40.2 and subnet 255.255.255.0
I know it is layer3 but try than to connect via MAC-adres
by plisken
Sun May 17, 2020 5:15 pm
Forum: Scripting
Topic: Do LED flashes
Replies: 5
Views: 2231

Re: Do LED flashes

Hello msatter, it don't work but thanks for your help.
If you no what's wrong let me know please.
Greatings
by plisken
Sun May 17, 2020 1:07 pm
Forum: Scripting
Topic: Do LED flashes
Replies: 5
Views: 2231

Re: Do LED flashes

Thanks for your reply, i now that i use a script but i'm not so good to writing scrips.
If anybody help me to write this script
by plisken
Sun May 17, 2020 12:31 pm
Forum: Scripting
Topic: Do LED flashes
Replies: 5
Views: 2231

Do LED flashes

Hello, I want the LED to flash if no internet is available. I want to do this with netwatch.
I have the command just off and on but how can to make the flash?
system leds set 0  type=off
system leds set 0  type=on
Can somebody help me?
Thanks
by plisken
Mon May 11, 2020 11:26 am
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 18487

Re: script send email as user login into routerboard

This is the working script, but don't forget to setup the email settings in "tools" "email". :log info message=("Start Check Logged Users"); :local tmpAllTheUsersLogged value=[/user active find]; :if ([:len $tmpAllTheUsersLogged] > 0) do={ :local tmpMessage value="...
by plisken
Wed May 06, 2020 2:38 pm
Forum: Scripting
Topic: script send email as user login into routerboard
Replies: 34
Views: 18487

Re: script send email as user login into routerboard

I Delete :global cluEmailSent value="false"; in the script and everything looks fine to me.
I only get 1 email
Greatings
by plisken
Mon May 04, 2020 5:15 pm
Forum: Beginner Basics
Topic: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]
Replies: 9
Views: 9549

Re: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]

The best way is to work with adress-lists.
Greatings
by plisken
Sun May 03, 2020 11:27 pm
Forum: Beginner Basics
Topic: My Router does not have an IP address
Replies: 2
Views: 2344

Re: My Router does not have an IP address

If you are new to Mikrotik and you are dutch look at this website:
https://www.wirelessinfo.be/
by plisken
Sun May 03, 2020 4:16 pm
Forum: Beginner Basics
Topic: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]
Replies: 9
Views: 9549

Re: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]

Look to this topic on my website and look to the movie how remove fasttrack from your router.
In dutch but the movie is verry clear.
https://www.wirelessinfo.be/verwijder-fasttrack/

I hope to helped you.
by plisken
Thu Apr 30, 2020 4:17 pm
Forum: Beginner Basics
Topic: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]
Replies: 9
Views: 9549

Re: Mangle doesn't mark website traffic from Layer 7 Protocol entry [SOLVED]

Layer 7 works on http but not on https because the data is encrypted.
This is the reason that layer7 protocol fails.
by plisken
Wed Apr 22, 2020 5:43 pm
Forum: Beginner Basics
Topic: Restore "crashes" RB951G-2HnD
Replies: 10
Views: 3277

Re: Restore "crashes" RB951G-2HnD

you're welcome
by plisken
Wed Apr 22, 2020 12:29 pm
Forum: Beginner Basics
Topic: Restore "crashes" RB951G-2HnD
Replies: 10
Views: 3277

Re: Restore "crashes" RB951G-2HnD

Go to "new terminal" en give the command /interface ethernet set ether1 mac-address=xx......
But you must change the interface ether1 to your interface.
by plisken
Tue Apr 21, 2020 5:29 pm
Forum: Beginner Basics
Topic: Restore "crashes" RB951G-2HnD
Replies: 10
Views: 3277

Re: Restore "crashes" RB951G-2HnD

Use the netinstall procedure for recover your router.

My tutorial is in dutch but see what you must do in the movie

https://www.wirelessinfo.be/mikrotik-ne ... netinstall

I hope to help you
by plisken
Thu Mar 05, 2020 8:55 am
Forum: Beginner Basics
Topic: VRRP and DHCP-server
Replies: 4
Views: 4597

Re: VRRP and DHCP-server

Thanks for the response, I will try it out and let you know if it worked.
by plisken
Wed Mar 04, 2020 11:56 pm
Forum: Beginner Basics
Topic: VRRP and DHCP-server
Replies: 4
Views: 4597

Re: VRRP and DHCP-server

Nowbody knows?
by plisken
Wed Mar 04, 2020 12:51 pm
Forum: Beginner Basics
Topic: VRRP and DHCP-server
Replies: 4
Views: 4597

VRRP and DHCP-server

I see a VRRP configration on the Mikrotik wiki. https://wiki.mikrotik.com/wiki/Manual:VRRP-examples
But I don't know on which router the DHCP server should be configured or should it be on a separate router and should it be connected to the switch?
Greatings
by plisken
Wed Feb 12, 2020 8:47 pm
Forum: Beginner Basics
Topic: Slow performance on WAP ac
Replies: 8
Views: 5102

Re: Slow performance on WAP ac

Try to improve the speed by setting the distance. Double-click on the wireless interface and continue to advanced.
For example, write at distance 5 for 5 Km.
Enter a little more distance than the actual distance.
wireless-distance.png
by plisken
Wed Feb 12, 2020 6:53 pm
Forum: Beginner Basics
Topic: Vpn Pptp Client
Replies: 7
Views: 2559

Re: Vpn Pptp Client

I'm afraid this won't work
by plisken
Mon Jan 27, 2020 9:44 pm
Forum: Beginner Basics
Topic: Block incomming data from 8080 messages
Replies: 2
Views: 1578

Re: Block incomming data from 8080 messages

Thanks, for your answer.
Greatings
by plisken
Mon Jan 27, 2020 7:49 pm
Forum: Beginner Basics
Topic: Block incomming data from 8080 messages
Replies: 2
Views: 1578

Block incomming data from 8080 messages

Since I have blocked the port 8080 I get to see this in the log. even though the router is running alone. It seems like hacking attempts are being made. Anyone have an idea what's going on? 07:05:52 firewall,info 8080 blok input: in:sfpplus1-telenet out:(unknown 0), src-mac 00:17:10:87:0f:42, proto ...
by plisken
Fri Jan 17, 2020 1:11 pm
Forum: Beginner Basics
Topic: Locked out! hAP ac
Replies: 4
Views: 1831

Re: Locked out! hAP ac

You will unfortunately have to reset it.
by plisken
Fri Jan 17, 2020 1:10 pm
Forum: Beginner Basics
Topic: Blok interface ports for other machines
Replies: 3
Views: 1881

Re: Blok interface ports for other machines

Nobody knows anything?
by plisken
Fri Jan 17, 2020 12:45 am
Forum: Beginner Basics
Topic: Blok interface ports for other machines
Replies: 3
Views: 1881

Blok interface ports for other machines

I have disabled all unused interfaces. But now I want to prevent people from plugging the network cable into enabled ports and then connecting their PC or laptop. So I want to enter the MAC address for the device that can connect to the router. Can that be done? I thought about the bridge filter, bu...
by plisken
Wed Jan 15, 2020 5:20 pm
Forum: Beginner Basics
Topic: SXT LTE Kit
Replies: 5
Views: 2384

Re: SXT LTE Kit

The camera is not going to work, it needs 12 volts DC.
Or a PoE switch that supports IEEE 802.3af
by plisken
Fri Dec 27, 2019 2:31 pm
Forum: Scripting
Topic: Voltage Monitoring
Replies: 22
Views: 21108

Re: Voltage Monitoring

@Jotne, cool, but i don't nothing about splunk.

Have you a tutorial how to install splunk?

Greatings
by plisken
Tue Dec 24, 2019 8:29 pm
Forum: RouterBOARD hardware
Topic: CRS328 CPU temperature
Replies: 5
Views: 4213

Re: CRS328 CPU temperature

This is a great temperature.

I wonder why it is so high.
Which RouterOS does your CRS run on?
by plisken
Tue Dec 24, 2019 6:00 pm
Forum: RouterBOARD hardware
Topic: CRS328 CPU temperature
Replies: 5
Views: 4213

Re: CRS328 CPU temperature

See the screenshots a made with RouterOS 6.46.1
by plisken
Tue Dec 24, 2019 4:57 pm
Forum: RouterBOARD hardware
Topic: CRS328 CPU temperature
Replies: 5
Views: 4213

CRS328 CPU temperature

The CPU temperature of the CRS328-24P-4S + rm
has a constant temperature of 59 ° celcius.
This fully hardware offload is also configured
Is this temperature normal in a cooled 19 "rack?
I think this temperature is high.
Someone who also has this on the CRS328?
by plisken
Fri Nov 01, 2019 8:56 pm
Forum: Scripting
Topic: delay a script by 4 seconds.
Replies: 6
Views: 27598

Re: delay a script by 4 seconds.

Thanks for your help. I appreciate this.

Greatings
by plisken
Fri Nov 01, 2019 5:44 pm
Forum: Scripting
Topic: delay a script by 4 seconds.
Replies: 6
Views: 27598

Re: delay a script by 4 seconds.

I want to run a script and pause the last line for 4 seconds

ip route disable [find dst-address=0.0.0.0/0 gateway=xx.xx.xx.xx]
:log error "ISP2 is down"
Here must come the pause for this below command

/ip firewall connection remove [find]

Thanks for your effort.
by plisken
Fri Nov 01, 2019 9:04 am
Forum: Scripting
Topic: delay a script by 4 seconds.
Replies: 6
Views: 27598

Re: delay a script by 4 seconds.

Thanks for your reply

The problem is that I don't know where to place the delay in the script.

Something like that or am I wrong
/ ip firewall connection remove [find] :delay 4000ms;
by plisken
Fri Nov 01, 2019 1:30 am
Forum: Scripting
Topic: delay a script by 4 seconds.
Replies: 6
Views: 27598

delay a script by 4 seconds.

I want to delay a script by 4 seconds.
/ ip firewall connection remove [find]

How should I set this?

Thanks for your help.
by plisken
Sat Oct 05, 2019 3:17 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 33383

Re: NV3

Mikrotik is sometimes unclear and incomplete with their explanation.
I fully agree with that. Many tutorials are also outdated.
This is not a reproach to Mikrotik but the documentation could be better.
by plisken
Thu Oct 03, 2019 6:54 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 2231

Re: configuration transfer from crs125 to crs326

If you do this on the CRS 326, hardware offloading no longer works.
All data traffic is then handled by the CPU and then the network speed goes slower.
See this documentation: https://mum.mikrotik.com/presentations/ ... 088509.pdf
by plisken
Thu Oct 03, 2019 6:00 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 2231

Re: configuration transfer from crs125 to crs326

With the CRS326, do not use multiple bridges if you are configuring VLAN. Otherwise you lose Hardware Offload which will cause a slow network
by plisken
Wed Oct 02, 2019 2:18 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 33383

Re: NV3

Sorry to hear that. Normally I use Ubiquiti material to build up Point to Point connections. They are much better at throughput. Sorry Mikrotik I hope it will be worked on in the future. Don't let us down on wireless level. This is also important for many Mikrotik customers. A tip to Mikrotik also i...
by plisken
Wed Oct 02, 2019 12:41 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 33383

Re: NV3

I have not paid attention to the fact that all CPE devices are equipped with ARM CPUs. I don't have an ARM CPU yet and I didn't know this. My last purchase was this: https://mikrotik.com/product/wireless_wire_dish But must still fully test it. Sorry for this mistake, I was just trying to help you. r...
by plisken
Wed Oct 02, 2019 12:05 pm
Forum: General
Topic: Need some help troubleshooting a probable loop, please.
Replies: 7
Views: 2016

Re: Need some help troubleshooting a probable loop, please.

Hello, you have different RouterOS versions. Long term is this where there are very few bugs and works well. You have the stable version with newer implementations but which can still contain bugs. And you have the beta versions that still have to be tested. The last one (beta version) is not recomm...
by plisken
Wed Oct 02, 2019 11:58 am
Forum: General
Topic: Understand STP
Replies: 4
Views: 1366

Re: Understand STP

Ok, thanks for your clear answer.
by plisken
Wed Oct 02, 2019 11:56 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 33383

Re: NV3

ac antennas with mipsbe if they worked well. Mipsbe is legacy. Please do not spam
What do you mean SPAM? is this for the link to my website?
by plisken
Wed Oct 02, 2019 9:02 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 33383

Re: NV3

This is the result with a 1 km link test that I made. Note that the SXT does not support full duplex. It cannot send and receive at the same time. This link test was performed at 80 MHz. bandwidth. I am not in favor of that and normally I always use the 20 MHz. bandwidth. Not even Ce, just 20 MHz. R...
by plisken
Tue Oct 01, 2019 10:47 pm
Forum: General
Topic: Need some help troubleshooting a probable loop, please.
Replies: 7
Views: 2016

Re: Need some help troubleshooting a probable loop, please.

Try the long version of RouterOS.
I've had that too and now I can't see it anymore.
by plisken
Tue Oct 01, 2019 10:40 pm
Forum: General
Topic: Understand STP
Replies: 4
Views: 1366

Re: Understand STP

Thanks for your reply

I will ask my question differently.
Why does Mikrotik use 0x8000 and not 8000?
by plisken
Tue Oct 01, 2019 9:34 pm
Forum: General
Topic: Understand STP
Replies: 4
Views: 1366

Understand STP

Hello,
Why does Mikrotik use
/ interface bridge
add name = bridge priority = 0x1000

Is priority 1000 not good?
What does this priority 0x1000 stand for?
by plisken
Sat Sep 07, 2019 9:09 am
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Re: Wireless redundate link with bonding

@ CZFan Can you give me a example how to do that?
This seems interesting to try this out
Can also add a device each side of the wireless devices then use RSTP
by plisken
Fri Sep 06, 2019 10:59 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Re: Wireless redundate link with bonding

I try it with active-backup.

OSPF is also an option but I still have to study it. I keep this in my mind and try this later, much later :)
Thanks for this exchange of views
by plisken
Fri Sep 06, 2019 10:18 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Re: Wireless redundate link with bonding

An example, the 5 GHz. loses its connection through DFS.
The 2.4 GHz. connection must take over immediately.
That is why I would put the two interfaces in bonding.
Ether1 = 5 GHz. link
Ether2 = 2.4 GHz. link
by plisken
Fri Sep 06, 2019 9:42 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Re: Wireless redundate link with bonding

@Sebastia Ik denk dat de balance-xor Bonding de beste oplossing zal zijn aangezien deze de pakketten over eenzelfde verbinding stuurt totdat deze uitvalt en de ander het gaat overnemen. I think that the active backup will be the best solution since it sends the packages over the same connection unti...
by plisken
Fri Sep 06, 2019 8:43 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Re: Wireless redundate link with bonding

@Spacex i know that product and appreciate that.
But i will a configuration with bonding and with sxt.
Thanks fot your reply
by plisken
Fri Sep 06, 2019 12:26 pm
Forum: General
Topic: RBM33G can`t connect winbox neither by IP
Replies: 9
Views: 2432

Re: RBM33G can`t connect winbox neither by IP

If you have a firewall on the computer or laptop disable this.
If nothing works try to recover your Mikrotik router with netinstall.

https://www.wirelessinfo.be/mikrotik-netinstall/
Greatings
by plisken
Fri Sep 06, 2019 12:22 pm
Forum: General
Topic: Wireless redundate link with bonding
Replies: 15
Views: 4395

Wireless redundate link with bonding

I want to test a point to point link with two frequencies. This by bonding. Does anyone know what I would use bonding best? It is intended as the 5 GHz. frequency connection is lost the 2.4 GHz. the connection would take or maintain. A redundant link. Anyone have an idea what kind of bonding should ...
by plisken
Mon Sep 02, 2019 8:57 pm
Forum: Beginner Basics
Topic: two networks with vlan in RB2011 and Groove
Replies: 2
Views: 1352

Re: two networks with vlan in RB2011 and Groove

With ether10 for the PoE
I want to set this to trunk
by plisken
Mon Sep 02, 2019 7:31 pm
Forum: Beginner Basics
Topic: two networks with vlan in RB2011 and Groove
Replies: 2
Views: 1352

two networks with vlan in RB2011 and Groove

I have an RB2011 and a groove.
I want two wireless networks private and guest.
I arranged that with two VLANs but I still have to bring the two networks to the groove.
How do I configure these so that both vlans also work on the groove?

Anybody can help me?
by plisken
Sun Aug 25, 2019 6:13 pm
Forum: Beginner Basics
Topic: I need to block facebook and youtube [SOLVED]
Replies: 7
Views: 37474

Re: I need to block facebook and youtube [SOLVED]

The best way is to block via the address list Since the layer7 protocol no longer works properly due to the HTTPS protocol You have to copy and paste everything into "new terminal" /ip firewall address-list add address = www.facebook.com list = block-facebook add address = facebook.com lis...
by plisken
Thu Aug 08, 2019 10:27 pm
Forum: Scripting
Topic: Can a script be created if a wrong login name is used
Replies: 53
Views: 11403

Re: Can a script be created if a wrong login name is used

You are great Jotne, you are a great help for me and many others.

Thanks a lot
by plisken
Thu Aug 08, 2019 8:33 pm
Forum: Scripting
Topic: Can a script be created if a wrong login name is used
Replies: 53
Views: 11403

Re: Can a script be created if a wrong login name is used

Hello Jotne, thanks for your effort, i appresiate that.
by plisken
Thu Aug 08, 2019 8:11 pm
Forum: Scripting
Topic: Can a script be created if a wrong login name is used
Replies: 53
Views: 11403

Re: Can a script be created if a wrong login name is used

I found something like this on this forum but i want edit this to is used a wrong username. :local loglist [:toarray [/log find time>([/system clock get time] - 1m) message~"critical login failurel"]] :foreach i in=$loglist do={ :local logMessage [/log get $i message] :local ip [:pick $log...
by plisken
Thu Aug 08, 2019 7:23 pm
Forum: Scripting
Topic: Can a script be created if a wrong login name is used
Replies: 53
Views: 11403

Can a script be created if a wrong login name is used

Can a script be created if a wrong login name is used to place the IP address in the address list and then be blocked into the firewall?
For example, superuser is the correct name. All the rest is wrong and must by blocked

Thanks
by plisken
Wed Jul 31, 2019 12:01 pm
Forum: Scripting
Topic: Email-script if a certain DSTNAT is used
Replies: 1
Views: 1949

Email-script if a certain DSTNAT is used

I'd like to make a script. If someone wants to log in via a DSTNAT rule an email is sent to me. I have created and logged the DSTNAT rule The log looks like this firewall,info DSTNAT-RULE dstnat: in:sfp-sfpplus1_WAN out:(unknown 0), src-mac xx:xx:xx:xx:xx:xx, proto TCP (SYN), 111.111.111.111:2019->1...
by plisken
Sun Jul 28, 2019 7:58 pm
Forum: Scripting
Topic: Black list for failed login to IPSec VPN
Replies: 62
Views: 33516

Re: Black list for failed login to IPSec VPN

Very interesting application. I will definitely use this script. Thanks
by plisken
Sun Jul 28, 2019 1:35 pm
Forum: General
Topic: Does this mean that these IP addresses were connected to my network and used my network?
Replies: 3
Views: 1722

Re: Does this mean that these IP addresses were connected to my network and used my network?

Thank you for your reply Sebastia.
It reassures me that they have not yet entered my network.
by plisken
Sun Jul 28, 2019 10:04 am
Forum: General
Topic: Does this mean that these IP addresses were connected to my network and used my network?
Replies: 3
Views: 1722

Does this mean that these IP addresses were connected to my network and used my network?

Does this mean that these IP addresses were connected to my network and used my network? Are these logged in because I doubt that they do not have my login. I use RouterOS 6.44.5 long term. jul/26 19:13:41 ovpn,info TCP connection established from 67.21.36.2 jul/26 20:04:38 ovpn,info TCP connection ...
by plisken
Thu Jul 25, 2019 4:46 pm
Forum: Scripting
Topic: Built in function library
Replies: 132
Views: 134702

Re: Built in function library

With firewall address-list with blocked ip automatically add dns resolve with name.
Would be a nice asset
by plisken
Sat Jul 20, 2019 8:02 pm
Forum: General
Topic: SFP+ to SFP interface = error
Replies: 1
Views: 1012

Re: SFP+ to SFP interface = error

I solved the problem by unchecking auto negotiation and setting 1G manually.
Everything works now.
by plisken
Sat Jul 20, 2019 7:22 pm
Forum: General
Topic: SFP+ to SFP interface = error
Replies: 1
Views: 1012

SFP+ to SFP interface = error

I cannot connect a CCR with an SFP + interface to an RB3011 or 2011 that has only one SFP interface. If I use the 3011 and the 2011 with both SFP interfaces, this will work. Someone experience with it.
by plisken
Sat Jun 29, 2019 2:32 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 291
Views: 421930

Re: Using RouterOS to VLAN your network

Great job and very informative. Thank you for this. I am looking for a vlan configuration for my CCR-1036 VLAN 10.20.30 for example I want two trunks, one of which goes to a CRS 328 with VLAN 10.20.30 and this via SFP + 1 the second SFP port would be used as a trunk to the CRS-326 and this with VLAN...
by plisken
Tue Jun 25, 2019 2:53 pm
Forum: Beginner Basics
Topic: Mikrotik VPN Connection
Replies: 6
Views: 2057

Re: Mikrotik VPN Connection

CAUTION! This webpages are not safe
by plisken
Fri Jun 21, 2019 10:12 pm
Forum: Scripting
Topic: IP Pool Statistics
Replies: 16
Views: 28122

Re: IP Pool Statistics

Very useful script. Can you have this dhcp info mailed to you? Can you equip the script with that?
by plisken
Fri Jun 21, 2019 2:30 pm
Forum: Scripting
Topic: script that sends an email if the temperature of the Mikrotik router gets too high
Replies: 2
Views: 3371

Re: script that sends an email if the temperature of the Mikrotik router gets too high

Thanks rjscomms, Yes, I want to help people as much as possible with Mikrotik routers and networks. And this in a simple way. I myself am not technically trained with networking but for me this is a hobby to investigate. Many thanks for your help, I appreciate this.
by plisken
Fri Jun 21, 2019 1:48 am
Forum: Scripting
Topic: script that sends an email if the temperature of the Mikrotik router gets too high
Replies: 2
Views: 3371

script that sends an email if the temperature of the Mikrotik router gets too high

Can someone help me with a script that sends an email if the temperature of the Mikrotik router gets too high?
Both the CPU and the board temperature.
Thanks
by plisken
Thu Jun 20, 2019 2:34 pm
Forum: General
Topic: L2TP IPSec (no suit proposal found)
Replies: 59
Views: 60604

Re: L2TP IPSec (no suit proposal found)

To the Mikrotik people. Why don't you make a clear tutorial with the current RouterOS. The IPSec. settings have been changed many times and over time everything becomes unclear. Make a clear and current tutorial on how to configure an L2TP server with IPSec. That will be welcome for many people. Cle...
by plisken
Fri Jun 14, 2019 5:32 am
Forum: Scripting
Topic: switch on and off wifi radio script don't work anymore
Replies: 8
Views: 2482

Re: switch on and off wifi radio script don't work anymore

@krafg I did this, but if the power goes out, this entire script is disrupted. This is because the start time of the first time it has started has passed.
I'm looking for a solution (a script) to correct the start time.
A kind of reset of this script so that it works again.
by plisken
Thu Jun 13, 2019 11:43 pm
Forum: Scripting
Topic: switch on and off wifi radio script don't work anymore
Replies: 8
Views: 2482

Re: switch on and off wifi radio script don't work anymore

Ok, i try this and thanks for your reply.
by plisken
Thu Jun 13, 2019 10:06 pm
Forum: Scripting
Topic: switch on and off wifi radio script don't work anymore
Replies: 8
Views: 2482

Re: switch on and off wifi radio script don't work anymore

I'm a noob in writing scripts.
Can you help me to turn on the WiFi every day from 7:00 am to 10:00 pm.
by plisken
Thu Jun 13, 2019 9:44 pm
Forum: Beginner Basics
Topic: Mikrotik VPN Connection
Replies: 6
Views: 2057

Re: Mikrotik VPN Connection

Hello, go to "new terminal" and type "export" copy and paste this code into this window on this forum.
Before you do that remove passwords and other sensitive data.
In this way we can view the configuration and possibly correct it.
by plisken
Thu Jun 13, 2019 9:37 pm
Forum: Scripting
Topic: switch on and off wifi radio script don't work anymore
Replies: 8
Views: 2482

switch on and off wifi radio script don't work anymore

Hello, I have a WiFi radio from Mikrotik that I switch on and off at certain hours. This with a script.
If there is a power failure, this script no longer works because the start time has been exceeded.
Can a script be created that reactivates the script?
by plisken
Wed May 29, 2019 6:49 pm
Forum: General
Topic: save my router backups on a usb stick
Replies: 3
Views: 3760

Re: save my router backups on a usb stick

It's working, thanks for yours reply

Greatings
by plisken
Mon May 27, 2019 3:13 pm
Forum: General
Topic: save my router backups on a usb stick
Replies: 3
Views: 3760

save my router backups on a usb stick

Hello, I want to save my router backups on a usb stick instead of files. Can i do that? And if so how should I proceed?
by plisken
Tue May 21, 2019 4:31 am
Forum: Beginner Basics
Topic: Boat setup for GrooveA 52hpn and RB 951Ui-2HnD
Replies: 28
Views: 21069

Re: Boat setup for GrooveA 52hpn and RB 951Ui-2HnD

If you look at Tx / Rx CCQ you see a very bad wifi link. Signal to noise is very close together and this because there is a source of interference nearby. Maybe there are too many wifi users. I speak of experience that the UBNT bullet or Nanostation can withstand these sources of interference much b...
by plisken
Sun May 19, 2019 7:27 pm
Forum: Beginner Basics
Topic: Who knows more external disk applications
Replies: 2
Views: 1209

Re: Who knows more external disk applications

I know that but I want to get as many codes as possible online so that this topic can be used extensively.
If you know the cli command for saving on a NAS, write them down on this topic pleace.
by plisken
Sun May 19, 2019 2:14 pm
Forum: Beginner Basics
Topic: Who knows more external disk applications
Replies: 2
Views: 1209

Who knows more external disk applications

Who knows more external disk applications and how to configure them. Here are some examples. I am already looking at how you can write the firewall address list on the external disk. Mikrotik user manager storage tool user-manager database set db-path=disk1/cache-n-db/user-manager Proxy-server stora...
by plisken
Sat May 18, 2019 5:09 am
Forum: General
Topic: VLAN CCR to CRS 328
Replies: 14
Views: 4265

Re: VLAN CCR to CRS 328

@MKX and Sindy If I understand correctly, the CRS-328 only supports using the VLAN filter. And this is how I set it up. But I'm confused about the CCR VLAN configuration. Many tutorials are incorrect and incomplete and this is my problem. Although I configured the CRS correctly, it cannot transport ...
by plisken
Fri May 17, 2019 10:45 pm
Forum: General
Topic: VLAN CCR to CRS 328
Replies: 14
Views: 4265

Re: VLAN CCR to CRS 328

This must have been a mistake was a management VLAN.
I have to remove the VLAN1
On the CRS I have configured 1 bridge and then created the VLANs. But the three VLANs don't work on the CRS.
VLAN is not my strongest topic and I find it somewhat confusing with all the different switch chips
by plisken
Fri May 17, 2019 10:13 pm
Forum: General
Topic: VLAN CCR to CRS 328
Replies: 14
Views: 4265

Re: VLAN CCR to CRS 328

Hello Sindy, thanks for your reply I have changed the CCR to this. I hope that's correct? /interface ethernet set [ find default-name=ether1 ] name=ether1-wan /interface vlan add interface=sfp-sfpplus1 name=vlan1-management vlan-id=1 add comment=secure-network interface=sfp-sfpplus1 name=vlan100-sec...
by plisken
Fri May 17, 2019 9:22 am
Forum: General
Topic: VLAN CCR to CRS 328
Replies: 14
Views: 4265

VLAN CCR to CRS 328

Hello, I want 4 VLANs on the CCR with IP addresses and DHCP server configured on. I want to transfer these VLAN networks to my CRS-328 via a SFP1 trunk. I don't get IP addresses distributed on the CRS-328 What am I doing wrong? I think it depends on the configuration of the CCR. Who can help me clar...
by plisken
Mon May 13, 2019 4:35 pm
Forum: Scripting
Topic: Voltage Monitoring
Replies: 22
Views: 21108

Re: Voltage Monitoring

Thanks Bobcatguy good work and a appresiate that.
by plisken
Tue Apr 30, 2019 8:45 am
Forum: Beginner Basics
Topic: create certificates for ovpn are this correct?
Replies: 3
Views: 1774

Re: create certificates for ovpn are this correct?

Hello, thanks for your reply.

I have copy and paste this from the wiki from Mikrotik.

I look to the given links.

Thank you.
by plisken
Mon Apr 29, 2019 5:26 am
Forum: Beginner Basics
Topic: mAP lite config [SOLVED]
Replies: 2
Views: 1651

Re: mAP lite config [SOLVED]

Hello, reset this device ore connect to wireless and you can login now.
Greatings
by plisken
Mon Apr 29, 2019 5:23 am
Forum: Beginner Basics
Topic: create certificates for ovpn are this correct?
Replies: 3
Views: 1774

create certificates for ovpn are this correct?

Hello, i create certificates for my Mikrotik router to use OVPN My question now is whether it can be used for all purposes or just ovpn Are the sign KLAT, KAT correct because the wiki is different. https://wiki.mikrotik.com/wiki/Manual:Create_Certificates Any help is welcome [admin@MikroTik] /certif...
by plisken
Tue Apr 23, 2019 5:24 pm
Forum: Scripting
Topic: Built in function library
Replies: 132
Views: 134702

Re: Built in function library

Completely unrelated to original topic.
What topic is unrelated?
by plisken
Thu Apr 18, 2019 4:23 pm
Forum: RouterBOARD hardware
Topic: CRS328 and poe-out status: overload
Replies: 16
Views: 9719

Re: CRS328 and poe-out status: overload

Yes i think so. Grandstream use 802.3af PoE
Greatings
by plisken
Thu Apr 18, 2019 7:05 am
Forum: RouterBOARD hardware
Topic: CRS328 and poe-out status: overload
Replies: 16
Views: 9719

Re: CRS328 and poe-out status: overload

I have this also. I have 3 Hikvision camera's nothing is wrong en working fine.
But Grandstream camera's don't work and the CRS328 Give error overload.
I have made i supout.rif and send this to Mikrotik.
I have also the Zyxel GS1920-24HP and everything works fine.
by plisken
Fri Apr 12, 2019 11:04 pm
Forum: RouterBOARD hardware
Topic: Difference between CRS 125 and the CRS326-24G-2S + RM
Replies: 3
Views: 2733

Re: Difference between CRS 125 and the CRS326-24G-2S + RM

Yes i know that but i would like to know more details about the differences regarding the configuration.
by plisken
Fri Apr 12, 2019 1:26 pm
Forum: RouterBOARD hardware
Topic: Difference between CRS 125 and the CRS326-24G-2S + RM
Replies: 3
Views: 2733

Difference between CRS 125 and the CRS326-24G-2S + RM

Hello,

With the difference, I don't mean the SFP and the double boot. But the difference between configurations and configuration properties.
What makes the CRS326 better as a switch? then the CRS125 en so on.
by plisken
Mon Apr 01, 2019 9:18 am
Forum: RouterBOARD hardware
Topic: Are you using a bad series of capacitors again
Replies: 0
Views: 1405

Are you using a bad series of capacitors again

Are you using a bad series of capacitors again ?. A friend of mine has purchased two CCRs, one of which has a capacitor exploded. The second CCR makes a squeaky sound and comes from the capacitors.
Mikrotik people can check that please.
I also wanted to buy one but I want this problem solved first.
by plisken
Thu Mar 28, 2019 2:03 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Hello, here a'm back with news. Can you explain that load balancing like this works with RouterOS 6.21.1 and not with the 44.1? On RB2011UiAS 2HnD-in I have been searching for a solution for almost a month. But no result. This must be a bug in RouterOS. Can you help me solve this with a working conf...
by plisken
Fri Mar 22, 2019 9:52 pm
Forum: Scripting
Topic: SOLVED Switch on PoE-out when the CPU temperature is too high
Replies: 4
Views: 3090

Re: Switch on PoE-out when the CPU temperature is too high

Hello Jotne, it works like a charm, you are great with scripts.

Thank you verry verry match
by plisken
Fri Mar 22, 2019 7:00 am
Forum: Scripting
Topic: SOLVED Switch on PoE-out when the CPU temperature is too high
Replies: 4
Views: 3090

SOLVED Switch on PoE-out when the CPU temperature is too high

Hello, I would like a script that turns on the PoE-out if the CPU temperature of the router gets too high. Temperature adjustable.
This by script in schedullar.
Does anyone have an idea?
Hoping that someone can help
by plisken
Mon Mar 18, 2019 11:28 pm
Forum: Scripting
Topic: Solved Script to recreate the load balance mangle rules
Replies: 12
Views: 41771

Re: Solved Script to recreate the load balance mangle rules

What are you talking about? Generally, load balancing and failover have always been working properly since the very beginning :) Have your account been compromised?.. Hello Chupaka, I am talking about the tutorials that were made and in which year. Steve Discher's tutorial is not working. Something...
by plisken
Sun Mar 17, 2019 7:17 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Thanks Sindy Fasttrack has been removed because they bypass the mangle rules, connection tracking etc. I know that.
But I look at your advice and let you know how it went.
Thanks in advance for your response
by plisken
Sun Mar 17, 2019 3:45 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 85
Views: 50252

Re: v6.44.1 [stable] is released!

What tutorials? We're not telepathists. More examples, please.
@Chupaka, see this topic and you know without telepathie :)
viewtopic.php?f=2&t=145970&e=1&view=unread#unread
by plisken
Sun Mar 17, 2019 3:37 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Yes just the per connection classifier is different:

8:0
8:1
8:2
8:3
8:4
8:5
8:6
8:7
by plisken
Sun Mar 17, 2019 6:52 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

@anav I would say otherwise, this would cost money to send the rubber tires to my house :) Now seriously, the load balancing and failover configuration has always worked. I have a person who tested it and reduced the speed instead of increasing it. And the problem is that the 8xWAN failover chooses ...
by plisken
Sun Mar 17, 2019 12:16 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

@anav Do you mean me that you sent me rubber tires?
by plisken
Sat Mar 16, 2019 5:10 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Hello, I tried all types and all tutorials, but still found no solution. I already send 3 supout.rif files and there is still no solution. In the past, that failover worked well with the 6.37 bugfix. Since I now have newer Mikrotik routers with I can no longer use this 6.37 and this RouterOS is outd...
by plisken
Sat Mar 16, 2019 2:02 pm
Forum: Scripting
Topic: RB750Gr 3 Load Balancing Scripting
Replies: 10
Views: 4220

Re: RB750Gr 3 Load Balancing Scripting

I try load balancing and failover with a CCR and RB1100AHx4 and it still don't work.
I have contact Mikrotik but i have still not the solution.
by plisken
Sat Mar 16, 2019 1:17 pm
Forum: Scripting
Topic: RB750Gr 3 Load Balancing Scripting
Replies: 10
Views: 4220

Re: RB750Gr 3 Load Balancing Scripting

Load balancing and failover don't work properly on Mikrotik routers.
by plisken
Sat Mar 16, 2019 1:06 pm
Forum: Scripting
Topic: Solved Script to recreate the load balance mangle rules
Replies: 12
Views: 41771

Re: Solved Script to recreate the load balance mangle rules

Load balancing and failover does not work properly.
Until 2019, load balancing and failover not worked properly.
High time to do something about it.
This would be a great asset for the Mikrotik routers
by plisken
Sat Mar 16, 2019 12:46 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 85
Views: 50252

Re: v6.44.1 [stable] is released!

What about load balancing and failover? Multiple tutorials about load balancing and failover do not work. Make it work so that we have a solution. I spent 14 days on a properly working load balancing and it still doesn't work. Very frustrating. That is not an advertisement for Mikrotik, do something...
by plisken
Sun Mar 10, 2019 6:37 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Hello, i have try another tutorial and let you see with a video.
Load balancing don't work, bandwidth is not cummulative i want create more bandwidth with 2 WAN"s
Why respond Mikrotik not.
https://youtu.be/sQOx1dAvta4

With RouterOS 37.4 i had now problems
by plisken
Sat Mar 09, 2019 5:46 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

@plisken my config can work at 2 wan as well, just remove anything to do with wan3 and change PCC to 2/0 and 2/1 the only reason I did not do a whole router export is I've used it to test vlan staff before and there are many unrelated code left. what I did was step by step: get each of wan connecti...
by plisken
Fri Mar 08, 2019 5:29 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Can someone the right configuration please?
With 2 WAN's so i can build the 8x WAN load-balancing.

I hope that this can.

I try the tutorial from Steve again and i have no solution with this tutorial.
by plisken
Thu Mar 07, 2019 10:09 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

I have try the tutorial from Steve but it's don't work also.
Thank you to all to find a solution.
I will keep you informed
by plisken
Thu Mar 07, 2019 5:34 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Hello thanks for the reply's, i don't know what's going wrong but i made a video with the log file. I hope someone can help me correct this error. Also the people from Mikrotik. https://youtu.be/6u7dQB_rhAE I made the video for more clarity. I've set up a log for every mangle rule. In this situation...
by plisken
Thu Mar 07, 2019 7:16 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

This is the code from the 8x failover and load-balancing configuration that not working correct. /interface bridge add fast-forward=no name=LAN /interface ethernet set [ find default-name=ether9 ] name=LAN9 set [ find default-name=ether10 ] name=LAN10 set [ find default-name=ether11 ] name=LAN11 set...
by plisken
Thu Mar 07, 2019 4:55 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

This configuration don't work.
I have not a commulatieve bandwidth and ISP2 become the main ISP in place off ISP1.

I want to set ISP1 to the main ISP because this is the fasted ISP.
WHo can help me.
by plisken
Sat Mar 02, 2019 6:11 pm
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

Re: load-balancing don't work

Thanks for your reply, ether5 must become a trunk for vlan.
I try this link out and let you know if it works.
Thanks
by plisken
Sat Mar 02, 2019 6:27 am
Forum: General
Topic: load-balancing don't work
Replies: 49
Views: 13259

load-balancing don't work

Hello, I have searched on the forum but nothing seems to work because they are outdated. The wiki did not yield anything either. That's why my new topic I want to configure an 8x WAN load balancing and that did not work. It also did not work when i testing a 2xWAN load-balancing configuration. It se...
by plisken
Mon Feb 18, 2019 4:18 pm
Forum: General
Topic: I have 8 ISP modems and I want to load balancing with the 8 modems how to set the pcc in mangle rules
Replies: 5
Views: 1662

Re: I have 8 ISP modems and I want to load balancing with the 8 modems how to set the pcc in mangle rules

I don't understand this.
Can you give me more explenation please?
For 8 ISP's for load balancing how i to do that can you give me a example.
by plisken
Mon Feb 18, 2019 1:13 pm
Forum: General
Topic: I have 8 ISP modems and I want to load balancing with the 8 modems how to set the pcc in mangle rules
Replies: 5
Views: 1662

I have 8 ISP modems and I want to load balancing with the 8 modems how to set the pcc in mangle rules

I have 8 ISP modems and I want to load balancing with the 8 modems. How should I set this mangle rule per connection classifier? Both addresses: 8/0 Both addresses: 8/1 Both addresses: 8/2 Both addresses: 8/3 Both addresses: 8/4 And so on? or do I have to set it differently? Thank you for your advic...
by plisken
Sun Jan 27, 2019 8:34 pm
Forum: General
Topic: a clear configuration L2TP server on a Mikrotik router
Replies: 8
Views: 7038

Re: a clear configuration L2TP server on a Mikrotik router

Hello I place the complete export here. Hoping if I have made a mistake that can be corrected. Many thanks to the quick response to solve my problem. /interface l2tp-server add name=L2TP1 user=user1 /interface bridge add admin-mac=6C:3B:6B:2E:BE:0E auto-mac=no comment=defconf name=bridge /interface ...
by plisken
Sun Jan 27, 2019 1:29 pm
Forum: General
Topic: a clear configuration L2TP server on a Mikrotik router
Replies: 8
Views: 7038

Re: a clear configuration L2TP server on a Mikrotik router

I try but it's don't work. See log 12:21:23 ipsec,error no suitable proposal found. 12:21:23 ipsec,error 213.119.169.98 failed to get valid proposal. 12:21:23 ipsec,error 213.119.169.98 failed to pre-process ph1 packet (side: 1, status 1). 12:21:23 ipsec,error 213.119.169.98 phase1 negotiation faile...
by plisken
Sun Jan 27, 2019 12:28 pm
Forum: General
Topic: a clear configuration L2TP server on a Mikrotik router
Replies: 8
Views: 7038

Re: a clear configuration L2TP server on a Mikrotik router

Thanks pcunite i try this and hope it's work
I let you know
Greatings
by plisken
Sat Jan 26, 2019 11:16 pm
Forum: General
Topic: a clear configuration L2TP server on a Mikrotik router
Replies: 8
Views: 7038

a clear configuration L2TP server on a Mikrotik router

Can someone show me a clear configuration of an L2TP server on a Mikrotik router.
Also the firewall rules and where the external and internal IP address should come. Is for logging in with android.
All these that I have found online do not work
by plisken
Thu Jan 24, 2019 2:08 am
Forum: Beginner Basics
Topic: Como usa a RBGrooveA-52HPn simultâneo
Replies: 2
Views: 1191

Re: Como usa a RBGrooveA-52HPn simultâneo

O De Groove pode transmitir apenas uma frequência.
Ou 2,4 GHz ou 5,8 GHz.
Greatings
by plisken
Thu Jan 24, 2019 12:51 am
Forum: General
Topic: SSD can not be formatted on RB1100AHx4
Replies: 0
Views: 846

SSD can not be formatted on RB1100AHx4

I have mounted an SSD disk in the RB1100AHx4 dude version. The capacity of the SSD is 450 GB.
The router sees the SSD perfectly but I can not eject it.
As a result, the SSD can not be formatted.
RouterOS 6.44beta61 and 6.43.8
Can someone help me please?
by plisken
Sat Jan 19, 2019 5:59 pm
Forum: Announcements
Topic: WPA2 preshared key brute force attack
Replies: 33
Views: 51295

Re: WPA2 preshared key brute force attack

WPA3 is not supported in any client devices yet, as far as I know.
@Normis, When can we expect WPA3 updates on the Mikrotik devices
by plisken
Wed Jan 09, 2019 2:40 pm
Forum: General
Topic: catch-all rule block all the traffic
Replies: 7
Views: 2962

Re: catch-all rule block all the traffic

I have not a external DHCP-server and i have allow remote requests enabled. I have add two rules in the firewall add action=drop chain=input comment="Deny WAN DNS queries-UDP" dst-port=53 in-interface-list=WAN log=yes protocol=udp add action=drop chain=input comment="Deny WAN DNS quer...
by plisken
Wed Jan 09, 2019 1:01 pm
Forum: General
Topic: catch-all rule block all the traffic
Replies: 7
Views: 2962

Re: catch-all rule block all the traffic

@ anav, thanks for your effort and share this firewall rules.
I appreciate this verry much.
by plisken
Tue Jan 08, 2019 12:15 pm
Forum: General
Topic: catch-all rule block all the traffic
Replies: 7
Views: 2962

catch-all rule block all the traffic

If I activate catch-all rule into the firewall filter, I have no longer access to the router and I have no longer internet access. Is this a bug, or am I doing something wrong? RB1100AHx4 with RouterOS 6.43.8 /ip firewall filter add action=accept chain=input comment="defconf: accept established...
by plisken
Sun Dec 30, 2018 11:39 am
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 2889

Re: What about WPA3

Thanks Mistry7
This will be investing, but is not yet for now. Many devices still do not support that
by plisken
Sun Dec 30, 2018 11:25 am
Forum: Wireless Networking
Topic: What about WPA3
Replies: 3
Views: 2889

What about WPA3

To the Mikrotik people
What bothered with the implimentation of WPA3? Is this made possible by a firmware upgrade?
Or should other WiFi radios be used.
In other words, new hardware or not.
Greatings
by plisken
Wed Dec 26, 2018 1:49 pm
Forum: The Dude
Topic: How to change the dude library on the RB 1100AHx4
Replies: 1
Views: 2922

Re: How to change the dude library on the RB 1100AHx4

Yes, with dude set data-directory=*****/dude-data

You have to enter the correct directories where the asterisks are
by plisken
Sat Dec 15, 2018 9:24 am
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

Put the USB-stick into the USB-port and look if you have a ip-adres from the ISP. Look to "IP" "dhcp client" if you have a IP-adres to the LTE I will look with Teamviewer to your problem. I'm afraid that the USB stick is not compatible with your Mikrotik router. Contact me on my ...
by plisken
Thu Dec 13, 2018 2:47 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

Let me know and goodluck
by plisken
Thu Dec 13, 2018 2:32 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

The mac address comes from your own USB dongle.
If you see no LTE at "interfaces", then you can reboot your router with the USB dongle plugged in.
Is it about a different model than the Huawei E3372?
If so, which brand and model
by plisken
Thu Dec 13, 2018 1:33 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

Have you first add the LTE USB dongle?

Greatings
by plisken
Wed Dec 12, 2018 9:23 am
Forum: General
Topic: RB1100AH X4 dude edition max ssd storage
Replies: 0
Views: 722

RB1100AH X4 dude edition max ssd storage

What is the maximum capacity of the SSD that is supported?
Not the 60 GB but other SSDs
Which SSDs can be used for this? model, brand etc.
by plisken
Sat Dec 08, 2018 6:35 pm
Forum: The Dude
Topic: RB1100AH X4 dude edition how installing dude on onboard 60 G ssd
Replies: 2
Views: 2998

RB1100AH X4 dude edition how installing dude on onboard 60 G ssd

Can someone tell me how to install the dude on the onboard 60 G ssd please?
Which method should I apply for this
by plisken
Wed Dec 05, 2018 8:16 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

I configured the router and paste the export here. # model = RouterBOARD 750G r3 /interface lte set [ find ] mac-address=0C:5B:8F:27:9A:64 name=lte1 /interface bridge add fast-forward=no name=bridge-mobile /interface list add name=LAN add name=WAN /ip pool add name=dhcp_pool-mobile ranges=192.168.10...
by plisken
Wed Dec 05, 2018 8:16 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

I configured the router and paste the export here. # model = RouterBOARD 750G r3 /interface lte set [ find ] mac-address=0C:5B:8F:27:9A:64 name=lte1 /interface bridge add fast-forward=no name=bridge-mobile /interface list add name=LAN add name=WAN /ip pool add name=dhcp_pool-mobile ranges=192.168.10...
by plisken
Tue Dec 04, 2018 11:14 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Hello, your welcome no problem. My website link is https://www.wirelessinfo.be. I'm curious and hope it's this configuration that you need. The TP-Links must now be configured in AP mode. MPLS / VPLS is faster but makes it more complicated. So I do not know if you would benefit from it. Greetings an...
by plisken
Mon Dec 03, 2018 1:26 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

I have hopefully a solution for you. caution this is made with a 5 GHz; SXT G-5HPacD SXT1 /interface bridge add fast-forward=no name=bridge-local add fast-forward=no name=bridge-sxt2 /interface wireless set [ find default-name=wlan1 ] disabled=no frequency=5200 mode=ap-bridge ssid=sxt2 /interface wi...
by plisken
Mon Dec 03, 2018 9:27 am
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Login into the SXT1 and in new terminal type "export" and paste the result on this forum.
Remove passwords.
Do the same on SXT 2
I test this configuration and try to help you.
by plisken
Sun Dec 02, 2018 3:08 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

Re: HUAWEI E3372 LTE USB Stick on the Mikrotik router

Where is it wrong?
Do you have the same USB LTE device?
You have to enter the pin code?
What is your original language.

What is the model from your Mikrotik router?

I try to help you
by plisken
Sun Dec 02, 2018 3:04 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Can you make a drawing of your configuration?
Then I can see how to configure the SXTs
by plisken
Fri Nov 30, 2018 3:52 pm
Forum: Beginner Basics
Topic: Firewall what is untracked
Replies: 4
Views: 9922

Re: Firewall what is untracked

Ok now i understanding.
Bedankt voor de duidelijke uiteenzetting.
by plisken
Fri Nov 30, 2018 3:31 pm
Forum: Beginner Basics
Topic: Firewall what is untracked
Replies: 4
Views: 9922

Re: Firewall what is untracked

Thank you for your quick response,
I do not understand which packages they are and what they do in the network.
And why are they allowed in the router?
by plisken
Fri Nov 30, 2018 1:02 pm
Forum: Beginner Basics
Topic: Firewall what is untracked
Replies: 4
Views: 9922

Firewall what is untracked

Maby a noob question.

What does untracked mean in the Mikrotik firewall.
This in the filter rule connection state established, related, untracked.

What does untracked data traffic do? ore what i mean this.
by plisken
Tue Nov 27, 2018 6:41 pm
Forum: Forwarding Protocols
Topic: MPLS MTU Calculations
Replies: 19
Views: 7569

Re: MPLS MTU Calculations

What is the correct MTU for this setup pleace?
How do I check in Wireshark that the packages are not fragmented ?
Thank you very much for this explanation
by plisken
Mon Nov 26, 2018 11:06 pm
Forum: Forwarding Protocols
Topic: MPLS MTU Calculations
Replies: 19
Views: 7569

Re: MPLS MTU Calculations

Do I have to set 1472 mtu on the SXTs?
Thank you for your quick response
by plisken
Mon Nov 26, 2018 4:40 pm
Forum: Forwarding Protocols
Topic: MPLS MTU Calculations
Replies: 19
Views: 7569

Re: MPLS MTU Calculations

I have done like this with two SXT G-5HPacD but MTU is wrong. C:\Users\Jean-Pierre>ping www.yahoo.com -f -l 1530 Pinging atsv2-fp-shed.wg1.b.yahoo.com [87.248.98.8] with 1530 bytes of data: Packet needs to be fragmented but DF set. Packet needs to be fragmented but DF set. Packet needs to be fragmen...
by plisken
Fri Nov 23, 2018 6:33 pm
Forum: Forwarding Protocols
Topic: Manual Multiple_TE_VPLS on the wiki
Replies: 3
Views: 1578

Re: Manual Multiple_TE_VPLS on the wiki

Thanks for your reply but it don't work.
BGP is also not established.
by plisken
Fri Nov 23, 2018 1:43 pm
Forum: Forwarding Protocols
Topic: Manual Multiple_TE_VPLS on the wiki
Replies: 3
Views: 1578

Manual Multiple_TE_VPLS on the wiki

https://wiki.mikrotik.com/wiki/Manual:Multiple_TE_VPLS When I view this tutorial. I wonder where I have to connect the network cables. This tutorial is about 4 routers. How do you connect these together? Where should the WAN be connected? etc. Ethernet1 goes to ...? Ether2 goes to ...? Where is the ...
by plisken
Wed Nov 21, 2018 9:06 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Yes, and use a switch to connect SXT2 and the TP-link in AP mode.
by plisken
Wed Nov 21, 2018 5:42 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Hello, that you can not see the SXTs anymore is very normal.
On the WAN port of your TP link there is an active firewall that blocks this traffic.
Can you put the TP link in AP mode only?
Instead of the tp-link you can place a switch and there you connect the tplink in ap mode only.
by plisken
Wed Nov 21, 2018 12:27 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Hello, do you plug the sxt on the WAN site of your TP-link router?
by plisken
Mon Nov 19, 2018 9:14 pm
Forum: Beginner Basics
Topic: How to secure a network using ARP
Replies: 1
Views: 981

How to secure a network using ARP

I folow this tutorial. https://wiki.mikrotik.com/wiki/How_to_secure_a_network_using_ARP I have the hEX RB750Gr3 with RouterOs 6.43.4 with default configuration. I want secure a network using ARP Why does the ARP configuration come in red? can is set the ARP settings per port? If I allow the laptop v...
by plisken
Mon Nov 19, 2018 9:10 am
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Hello,
Maybe you can configure VLAN on the SXTs
But for that I would like to see your complete configuration on a drawing
by plisken
Sun Nov 18, 2018 8:43 pm
Forum: Beginner Basics
Topic: ethernet over lte/usb
Replies: 6
Views: 2863

Re: ethernet over lte/usb

Hello ,
Can somebady help me to bridge LTE interface with eth1 ? ....Lte interface is not available to add in bridge.
I want to give Internet to all Ethernet ports on the LTE interface.
Thx
Try something like that. In dutch but folow my tutorial and hopefuly its working on your router
Greatings
by plisken
Sun Nov 18, 2018 8:35 pm
Forum: Beginner Basics
Topic: Share Internet over SXTs
Replies: 19
Views: 4477

Re: Share Internet over SXTs

Try this configuration to obtain a stable point to point link.
Spoken in Dutch but just follow my tutorial
https://www.youtube.com/watch?v=FAGbPd0Nm94&t=9s
Goodluck
by plisken
Wed Nov 14, 2018 5:00 pm
Forum: Beginner Basics
Topic: Dutch tutorial how to make a point to point configuration with MPLS-VPLS
Replies: 0
Views: 741

Dutch tutorial how to make a point to point configuration with MPLS-VPLS

A Dutch-language tutorial about a point to point connection configuration using MPLS-VPLS with two Mikrotik SXT G-5HPacD
https://www.youtube.com/watch?v=FAGbPd0 ... DZg5QDVTV5

good luck
by plisken
Thu Nov 01, 2018 8:49 pm
Forum: Beginner Basics
Topic: layer7 Regexp code for the Fortnite game
Replies: 0
Views: 1317

layer7 Regexp code for the Fortnite game

Can someone give me the layer7 Regexp code for the Fortnite game please?
Maybe for the Mikrotik people.
Can youbuild a Regexp database and put it online for all kinds of games and applications please?

Thanks for someone who helps me
by plisken
Tue Oct 30, 2018 5:52 pm
Forum: General
Topic: complete firewall rules
Replies: 3
Views: 1684

Re: complete firewall rules

Thanks PCUNITE i appreciate that.
by plisken
Tue Oct 30, 2018 2:37 pm
Forum: General
Topic: complete firewall rules
Replies: 3
Views: 1684

Re: complete firewall rules

Nowbody knows?
by plisken
Mon Oct 29, 2018 2:29 pm
Forum: General
Topic: complete firewall rules
Replies: 3
Views: 1684

complete firewall rules

Does anyone have an idea how to make this firewall more complete. RouterOS 6.43.4 RB100AHx4 Thanks for your help /ip firewall address-list add address=192.168.125.0/24 list="Nat masquerading" add address=192.168.125.0/24 list=support add address=0.0.0.0/8 comment="Self-Identification ...
by plisken
Fri Oct 26, 2018 9:15 am
Forum: Beginner Basics
Topic: NEED HELP SXT wireless p2p bridge
Replies: 4
Views: 1490

Re: NEED HELP SXT wireless p2p bridge

AP site /interface bridge add name=bridge1 /interface wireless set [ find default-name=wlan1 ] antenna-gain=16band=5ghz-onlyac channel-width=\20/40/80mhz-eCee country=belgium disabled=nofrequency=5600 guard-interval=\long l2mtu=1600 mode=ap-bridgessid=sxt-ac-ap tx-power-mode=all-rates-fixed \wireles...
by plisken
Thu Oct 25, 2018 7:34 pm
Forum: Beginner Basics
Topic: NEED HELP SXT wireless p2p bridge
Replies: 4
Views: 1490

Re: NEED HELP SXT wireless p2p bridge

Hello, what type are your sxt?
by plisken
Thu Oct 18, 2018 12:30 pm
Forum: Scripting
Topic: Built in function library
Replies: 132
Views: 134702

Re: Built in function library

Yes indeed that's what i mean Chupaka.
by plisken
Thu Oct 18, 2018 12:23 pm
Forum: Scripting
Topic: Built in function library
Replies: 132
Views: 134702

Re: Built in function library

Hallo Chupaka, something like that.
In the same way the SSL turns HTTP web traffic into HTTPS encrypted Web traffic, DNSCrypt turns regular DNS traffic into encrypted DNS traffic that is secure from eavesdropping and man-in-the-middle attacks.

Grt
by plisken
Wed Oct 17, 2018 4:47 pm
Forum: Scripting
Topic: Built in function library
Replies: 132
Views: 134702

Re: Built in function library

Secure DNS implementation would be welcome in the future
by plisken
Tue Oct 16, 2018 3:43 pm
Forum: Beginner Basics
Topic: Limit-at queue question
Replies: 2
Views: 3149

Re: Limit-at queue question

See this movies on my site

full queue management deel 1 and full queue management deel 2

https://www.wirelessinfo.be/mikrotik-queues/

Goodluck
by plisken
Mon Oct 15, 2018 6:52 pm
Forum: Beginner Basics
Topic: How configure hw-offload on RB1100AHx4?
Replies: 2
Views: 1445

Re: How configure hw-offload on RB1100AHx4?

That explains why I did not get this solved.
Thank you very much
by plisken
Mon Oct 15, 2018 5:20 pm
Forum: Beginner Basics
Topic: How configure hw-offload on RB1100AHx4?
Replies: 2
Views: 1445

How configure hw-offload on RB1100AHx4?

How do I configure hardware offload on the RB1100AHx4?
On the RB1100AHx2 it works but the X4 does not work. How do I solve this.
by plisken
Wed Oct 03, 2018 6:32 pm
Forum: Beginner Basics
Topic: HUAWEI E3372 LTE USB Stick on the Mikrotik router
Replies: 18
Views: 29763

HUAWEI E3372 LTE USB Stick on the Mikrotik router

Watch this video tutorial that i made
How to set the HUAWEI E3372 LTE USB Stick on the Mikrotik router. See this on my website. In Dutch but the video is clear.
https://www.wirelessinfo.be/huawei-e337 ... verbinden/
by plisken
Sun Sep 30, 2018 10:41 am
Forum: General
Topic: I am Not a Robbot
Replies: 17
Views: 3146

Re: I am Not a Robbot

when i a searching any thing on google search engine i am found that i am no robot, that time i am reset device and upgrade version and same i found in after 1-2 days, same i checked all version, kindly suggest me where i can block these traffic generating from device. Which internet provider do yo...
by plisken
Sun Sep 30, 2018 10:28 am
Forum: General
Topic: CRS VLAN tagging interesting problem
Replies: 12
Views: 2298

Re: CRS VLAN tagging interesting problem

Unifi devices use client isolation.
by plisken
Sun Sep 30, 2018 10:21 am
Forum: General
Topic: VRRP - Does it work on different subnet masks?
Replies: 6
Views: 4060

Re: VRRP - Does it work on different subnet masks?

Look this tutorial in dutch but it's verry clear.

https://www.wirelessinfo.be/vrrp-redundantie/
  • 1
  • 2
  • 3
  • 4
  • 5
  • 9