+1 for Dude SNMP 64 bit counters

Best Regards
Friedl Florian

Hello. I am searching for user "antoxic", which has implemented Zabbix. It seems, that I have to do the same here this year. ;-) Maybe we could exchange useful informations and work together? Would you provide me your email address or send me one to friedl@rauter-it.at ? Thanks Currently I...

Hello. I am searching for user "antoxic", which has implemented Zabbix. It seems, that I have to do the same here this year. ;-) Maybe we could exchange useful informations and work together? Would you provide me your email address or send me one to friedl@rauter-it.at ? Thanks Currently I...

This is from the WiKi Page. Note: MikroTik devices and SFP/SFP+/QSFP+ modules do not have any restrictions for other vendor equipment. As long as the other vendor modules and devices comply with transceiver multi-source agreement (MSA) they should be compatible with MikroTik. We are using these SFPs...

These SFPs are used, I have 50+ customers online with that. But sometimes I have the problem that I have to reboot the hEX router. TX 1310 / RX 1490 in customer site with hEX https://www.fs.com/de/products/11802.html TX 1490 / RX 1310 in provider site with Alcatel SAS https://www.fs.com/de/products/...

Hello crowd. We are a small ISP and we provide FTTH for business and private households at our location. We are using hEX S (FW 6.45.8) with 1GB single fibre SFPs from FS.com (TX 1310 / RX 1490 at customer site) and Alcatel SAS-M on provider site. Sometimes I cannot reach some routers. When I look f...

Are there any news on this case?
I think we are not the only winbox-users, that are using 4k Displays.

Best Regards
Florian

What about a User permission feature! Not only READ OR WRITE!

I want to give read-only access to several user, but only for a few maps or pannels.

Best Regards
Florian

Krisjanis from Support team tried in RC Version 6.39.rc19 and charts in panels are available there! We haven't updatet yet, because we are waiting for a "current" version, so I cannot say anything about panels in gernerel! But I think you should give it a try, when "6.39" is avai...

What version of Dude are you using ? Please test with the latest version.

We tested this a few months ago.
There is nothing in release notes since then, so why should I "test" it again?
Please have a look into your actual RC and give us info if it was fixed or not!

THX Florian

+1 for this feature request!
It would be good if background-images loaded from google maps or open streetmap would be scaleable

best regards
Florian

Hello Everyone! Does anyone from you use charts in panels? They are broken after 6.35.2 and I am wondering, that nobody is missing them! [img]www0.pr-link.at/dl/dude_screenshots/dude_charts_in_panels.png[/img] You cannot configure them in version after 6.35.2 6.35.2: [img]www0.pr-link.at/dl/dude_scr...

For all those who have the same problem with "Transmit loop detected". There is a BUG in RouterOS 6.30 when the UPTIME is more than 248 days. EOIP Tunnels go down until TIK is rebooted. You find in log the "Transmit loop detected, downing interface ...." This bug should be solved...

Same problem here with 6.30.4
EoIP Tunnels go down and stay down until rebooting the router. "transmit loop detected, downing interface for 60 seconds"

Are there any infos how to fix that problem?

Thanks Florian

I think you should first prove that a process running at 100% CPU is actually disrupting service. I have never seen that happen in Linux unless the process is at realtime priority.... which the export most likely isn't. Remember it is a multitasking OS. The task of the kernel is to schedule the CPU...

Hello! We are saving the configs of our TIKs periodically. I found out now, that there is a massive CPU load when we are doing the "export" command on the router. I tested it with ROS 6.32.4 and a RB750, which have very low CPU speed. With the CCR-Router and die RB1100AHx2 the problem is n...

I am not sure if the Switch Chip of the CRS does support any STP protocol. So you have build a loop I think.

Best Regards

I have still the same situation. Sometimes randomly routers are not manageable, but still forwarding traffic. We have this in different router OS and hardware versions.

Does really nobody have the same problem?

Best Regards
Florian

Hello! RB493G has 2 switch chips. How are they connected to CPU? With 1GB I think. We are using more then 100 of them in a WISP network and I think we can optimize the performance, just using other ETH ports. Is there a block diagramm for the 493G, like there is one for the RB2011? http://i.mt.lv/ro...

Hello lrl! I have nearly the same problem with CCR1036 (ROS 6.20) with bridging performance. (aprox 150 Mbit) You wrote, that you could fix it with activating flow control on Interface to ubnt switch. Where is this Swich in your test scenario, when you testet the following: Iperf Server < --> CCR103...

Hello Guys! We have installed CCR1036-12G-4S Routers (ROS V 6.20) in our wireless backbone last week. We have a routed network (aprox 2000 routes) with EoIP Tunnels and centralized PPPoE Concentrators. CCR works, but after a few hour/days I am not possible to connect to the router via winbox. But ro...

http://wiki.mikrotik.com/wiki/Manual:Tools/Profiler

Thanks. I will update the RB to last version to use this feature.

Hi Normis!

Is this feature already implemented or when it is planned?

I have approx 30-40% load on my RB and I want to know which process consumes the CPU time.

Best Regards