Community discussions

MikroTik App

Search found 13 matches

by jfoshee
Fri Apr 25, 2014 8:28 pm
Forum: General
Topic: IEEE 802.3ah/IEEE 802.3ag
Replies: 22
Views: 12150

Re: IEEE 802.3ah/IEEE 802.3ag

+1 for me on this too would like to see Ethernet OAM
by jfoshee
Fri Jul 13, 2012 1:15 am
Forum: General
Topic: NAT masquerade outbound port problem
Replies: 9
Views: 5415

Re: NAT masquerade outbound port problem

The server is freeswitch and I have aggressive nat on so it makes the client reg every 30 sec.

I have changed all the internal sip port and it does work well now.

It is a pain though to have to manually set all the internal sip ports. Is this the only way?
by jfoshee
Wed Jul 11, 2012 5:49 pm
Forum: General
Topic: Feature Request: MTR
Replies: 71
Views: 35071

Re: Feature Request: MTR

I agree with this one
by jfoshee
Wed Jul 11, 2012 5:47 pm
Forum: General
Topic: NAT masquerade outbound port problem
Replies: 9
Views: 5415

Re: NAT masquerade outbound port problem

[admin@MikroTik] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=srcnat action=masquerade out-interface=ether1-gateway Very basic nat here just anything that goes out eth 1. My problem is why doesn't the NAT change the source port when it does ...
by jfoshee
Wed Jul 11, 2012 7:50 am
Forum: General
Topic: NAT masquerade outbound port problem
Replies: 9
Views: 5415

Re: NAT masquerade outbound port problem

I have done lots of forum reading. My two choices are either to have every phone internaly use a different sip port or turn on sip AGL. What disavantage does sip AGL have?
by jfoshee
Wed Jul 11, 2012 7:40 am
Forum: General
Topic: NAT masquerade outbound port problem
Replies: 9
Views: 5415

NAT masquerade outbound port problem

I have a problem with NAT masquerade on a Mikrotik RB750. Here is the setup Server <----> Internet <-----> RB750 <------> Phones The phones that I am using are Cisco SPA942. All phones have the local sip port and remote sip port set as 5080. Here is the example IPs that I will be using for my exampl...
by jfoshee
Thu Nov 10, 2011 11:54 pm
Forum: Wireless Networking
Topic: RB with IPIP Tunnels with IPsec not working
Replies: 1
Views: 1700

RB with IPIP Tunnels with IPsec not working

I have two router boards that I am trying to setup IPIP tunnels with IPsec running across with OSFP. I get the tunnels up and able to pass traffic. I am able to reach both sides of the tunnel and behind the routers too. The problem is that the SA are only installed and the remote peers connection sh...
by jfoshee
Fri Nov 04, 2011 10:17 pm
Forum: Wireless Networking
Topic: RB411UAHR with MC8705 with ATT 3G HSPA+ SIM
Replies: 3
Views: 2089

Re: RB411UAHR with MC8705 with ATT 3G HSPA+ SIM

Well I have since found out everything so I will post so if anyone runs across this they know what I know. I tried with three different products on ATT network. The first was a DataConnection plan which is a session based plan for Consumers. The settings for this was the APN has to be isp.cingular o...
by jfoshee
Wed Nov 02, 2011 7:23 pm
Forum: Wireless Networking
Topic: RB411UAHR with MC8705 with ATT 3G HSPA+ SIM
Replies: 3
Views: 2089

RB411UAHR with MC8705 with ATT 3G HSPA+ SIM

I have a RB411UAHR with MC8705 that I am trying to setup with ATT 3G HSPA+ SIM card. Here is my device info and debug output. Not able to get the data to come up. Any help would be appreciated Thanks J

Device Info
http://pastebin.com/cwgyK20a

Log output
http://pastebin.com/u8HLv2Sp
by jfoshee
Wed Jul 06, 2011 9:01 pm
Forum: The Dude
Topic: Help with MIB
Replies: 2
Views: 3607

Re: Help with MIB

I thought the same thing as there was some that was missing the imports but I then made sure that all them showed that missing imports had nothing. Still the trees don't show up on the tree tab.

Any other thoughts?
by jfoshee
Wed Jun 29, 2011 12:04 am
Forum: The Dude
Topic: Help with MIB
Replies: 2
Views: 3607

Help with MIB

I am having a hard time with the MIB on The Dude 4.0beta3. I have loaded the following MIBs below but when I go to the tree I only see DLSW-MIB0 -- 1, IEEE8021-PAE-MIB -- 110, IEEE8023-LAB-MIB -- 85, and IEEE802dot11-MIB --218. All of the other ones are grayed out and I don't see them in the tree. W...
by jfoshee
Fri Jun 10, 2011 4:48 am
Forum: General
Topic: IPSEC between RouterOS 750 V4.11 and Cisco ASA 5510 V8.2(1)
Replies: 1
Views: 1273

Re: IPSEC between RouterOS 750 V4.11 and Cisco ASA 5510 V8.2

Ok here is a update. All attempts so far has been from the 750 to Cisco.... If I go from cisco to 750 it work great here is the cisco log Group = 68.109.sss.xxx, IP = 68.109.xxx.xxx, PHASE 1 COMPLETED Group = 68.109.xxx.xxx, IP = 68.109.xxx.xxx, Security negotiation complete for LAN-to-LAN Group (68...
by jfoshee
Fri Jun 10, 2011 12:02 am
Forum: General
Topic: IPSEC between RouterOS 750 V4.11 and Cisco ASA 5510 V8.2(1)
Replies: 1
Views: 1273

IPSEC between RouterOS 750 V4.11 and Cisco ASA 5510 V8.2(1)

I have set it up like described in this guide http://wiki.mikrotik.com/wiki/MikroTik_router_to_CISCO_PIX_Firewall_IPSEC As I know that is a pic there is slight differences but this is the problem I have. The 750 never even tries to make a connection to the cisco. The logs show no attempt. Below is m...