Community discussions

Search found 134 matches

by CyB3RMX
Fri Jul 19, 2019 2:49 am
Forum: General
Topic: Public IP DNAT Trough EoIP Tunnel.
Replies: 4
Views: 356

Re: Public IP DNAT Trough EoIP Tunnel.

Somehow the connection is established but doesnt go data over it... about 10secs later the connection is dropped... im not sure what i did wrong... =S any help?
by CyB3RMX
Fri Jul 19, 2019 2:25 am
Forum: General
Topic: Public IP DNAT Trough EoIP Tunnel.
Replies: 4
Views: 356

Re: Public IP DNAT Trough EoIP Tunnel.

It's very easy, you need to mark new incoming connections from tunnel and then route replies back to tunnel. It's pretty much the same thing as used for multi-WAN. Check PCC example (https://wiki.mikrotik.com/wiki/Manual:PCC) and you'll get it. Thank you so much.. great idea.. i haven't think about...
by CyB3RMX
Wed Jul 17, 2019 8:53 pm
Forum: General
Topic: Public IP DNAT Trough EoIP Tunnel.
Replies: 4
Views: 356

Public IP DNAT Trough EoIP Tunnel.

Hi all, I have a little complicated scenario that i would like some help. On POP1 i have a public IP address who handles some services. POP2 is a remote location where i have a branch that i need to use the same public IP from POP1 VPN-EoIP2.png What im trying to achieve is: - The server uses the sa...
by CyB3RMX
Tue Jul 16, 2019 7:31 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 69614

Re: v6.45.1 [stable] is released!

I found a bug in this version. I have a Basebox 5 and it has a radius enabled PPPoE Server, evertyhing there works fine, but when the user connects, it does not assing a queue to limit traffic.
I had to Downgrade to 6.44.3 to have this working.
Thanks
by CyB3RMX
Tue Jul 09, 2019 10:37 pm
Forum: General
Topic: No PPPOE Simple queues on 6.45.1
Replies: 3
Views: 615

Re: No PPPOE Simple queues on 6.45.1

i can confirm that.
I was running latest version 6.45.1 on a router who auth on Radius +PPPOE (cpe side) and No simple queues were added.
i downgraded to 6.44.5 and started to work fine.
by CyB3RMX
Thu Oct 04, 2018 8:47 pm
Forum: Wireless Networking
Topic: wireless PtP advice [SOLVED]
Replies: 8
Views: 838

Re: wireless PtP advice [SOLVED]

Sure a SXTsq Lite 5AC can do the job, just reduce the TX power on both sides to have around -50dbm on both sides and you should be able to pass over around 100mbps with those equipments.
regards.
by CyB3RMX
Thu Oct 04, 2018 8:09 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 25
Views: 6672

Re: New standard 802.11ax

Really? 160Mhz channels ? they are trying to make 5ghz the new 2.4ghz? or whats the deal?
by CyB3RMX
Mon Sep 10, 2018 6:26 pm
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 913

Re: SNMP issue... [SOLVED]

I just recall that the cpe is running a pppoe-client so the device is using the pppoe gateway.. I have a static ip address on the cpe which i'm using for management purposes, but when the pppoe is enabled all the output is going trough the pppoe gateway (which should be able to reach the server ip a...
by CyB3RMX
Mon Sep 10, 2018 6:15 pm
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 913

Re: SNMP issue... [SOLVED]

Hello.. Im graphing with mrtg some routers and some CPE, a couple of days ago, snmp stopped working on 3 routers, so i tought it was a routing issue since i was changing some stuff, but both devices, the mrtg server and the router are able to ssh, ping, etc.. just snmp does not work, even if i try ...
by CyB3RMX
Mon Sep 10, 2018 6:00 am
Forum: General
Topic: PowerBox Pro + wAPac Constantly Rebooting
Replies: 6
Views: 619

Re: PowerBox Pro + wAPac Constantly Rebooting

can you please run this and copy the output here..
/int ether export
by CyB3RMX
Mon Sep 10, 2018 5:43 am
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 913

SNMP issue... [SOLVED]

Hello.. Im graphing with mrtg some routers and some CPE, a couple of days ago, snmp stopped working on 3 routers, so i tought it was a routing issue since i was changing some stuff, but both devices, the mrtg server and the router are able to ssh, ping, etc.. just snmp does not work, even if i try c...
by CyB3RMX
Sun Aug 19, 2018 3:08 am
Forum: Wireless Networking
Topic: Decreased performance on nv2 slave APs
Replies: 1
Views: 410

Re: Decreased performance on nv2 slave APs

what version of rOS are you running?
by CyB3RMX
Sun Aug 19, 2018 3:04 am
Forum: General
Topic: Spectral-scan for AC devices.!
Replies: 6
Views: 1645

Re: Spectral-scan for AC devices.!

Its easy to say, but when you have more than 2000 cpe deployed its not a matter of a couple of hundred dollars to change brands...a lot of them are still 802.11n based but migrating to 802.11ac has been a real pain in the ass, and yes in some of the POPs i have been installing some damaged SXT and B...
by CyB3RMX
Sat Aug 18, 2018 9:15 pm
Forum: General
Topic: Spectral-scan for AC devices.!
Replies: 6
Views: 1645

Spectral-scan for AC devices.!

I think this is a MUST HAVE on all wireless devices, and even more for WISPs service providers that handles hundreds or even thousands CPE's and AP on the field. We've set out confidence on Mikrotik devices and a lot of WISP carriers use them, please take this serious.. the spectrum its getting crow...
by CyB3RMX
Sat Aug 18, 2018 7:50 pm
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT and two R11e-LTE
Replies: 3
Views: 1332

Re: RB953GS-5HnT and two R11e-LTE

Maybe is a power issue, i had an issue similar problem when i plugged in a Huawei MiniPCI LTE card and enabled onboard wifi on a RB912, this command helped.
/system routerboard usb set type=mini-PCIe
regards.
JB.
by CyB3RMX
Fri Jul 20, 2018 9:47 pm
Forum: Wireless Networking
Topic: Any news on SpectralScan on AC Devices?
Replies: 2
Views: 498

Any news on SpectralScan on AC Devices?

Hi, Well, as the subject says, is there any news of the spectralscan feature on AC devices.? ..

i think its a "Must have" in todays crowded spectrums.

Thanks!
by CyB3RMX
Fri Jul 20, 2018 1:55 am
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM: CWDM/DWDM SFP+ optics? [SOLVED]
Replies: 12
Views: 2753

Re: CRS317-1G-16S+RM: CWDM/DWDM SFP+ optics? [SOLVED]

Where do you get this updates ?
Thanks in advance!
by CyB3RMX
Mon Jul 09, 2018 8:55 pm
Forum: General
Topic: Is it possible to run a script on login?
Replies: 44
Views: 15017

Re: Is it possible to run a script on login?

:local currentBuf [ :toarray [ /log find message~"logged in from " || message~"login failure" ] ] ; I added "from" on the because i am running a PPPoE Server on this box and when a user connects it sends a false-positive alert (im using telegram instead of email)... when a pppoe user logs in you ge...
by CyB3RMX
Tue Jun 26, 2018 6:22 pm
Forum: General
Topic: Windows 10 and Winbox
Replies: 14
Views: 10101

Re: Windows 10 and Winbox

I have 3 laptops on field using WIN10 and the 3 of them are doing this, even running Winbox 3.15 with all the updates installed... its kind of annoying...
by CyB3RMX
Thu Jun 21, 2018 10:44 pm
Forum: General
Topic: Windows 10 and Winbox
Replies: 14
Views: 10101

Re: Windows 10 and Winbox

alguien soluciono el tema que winbox anda muy bien en windows 7 pero las pc nuevas no corren en el 7 me a traido muchos problemas, lei que se solucionaria en las versiones nuevas de winbox pero hasta la fecha no veo nada de nada he's asking that: "Does some one figure it out this winbox issue?, on ...
by CyB3RMX
Mon Apr 23, 2018 7:57 pm
Forum: The Dude
Topic: Sound notifications.
Replies: 0
Views: 372

Sound notifications.

Hello! I have a Dude Server running and have 2 users, one is full and the other is read only. I have a big screen at the middle of the office running a client with the read only user, the problem is when a node comes down, since the recent updates does not make the sound notificiation, but only if y...
by CyB3RMX
Thu Jan 04, 2018 8:10 pm
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 2048

Re: WAP60G 5GHz Support

Nop.. only 60Ghz.
Soon they will release an LHG60, with the same form factor of the LHG with a 60Ghz radio. Im not sure if they are using the same chip
by CyB3RMX
Thu Jan 04, 2018 7:04 pm
Forum: Beginner Basics
Topic: Why are ports 8291 and 8888 visible?
Replies: 3
Views: 596

Re: Why are ports 8291 and 8888 visible?

You can add this to your firewall to prevent port scanners to show the port open... /ip firewall filter add chain=input protocol=tcp dst-port=8291 in-interface="ether1" action=drop /ip firewall filter add chain=input protocol=tcp dst-port=8888 in-interface="ether1" action=drop Beware with the in-int...
by CyB3RMX
Fri Dec 01, 2017 1:15 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 15576

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

You did this tests without upgrading the CPEs ?.
regards
by CyB3RMX
Tue Nov 28, 2017 8:39 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 24
Views: 8033

Re: MU-MIMO?

LOL Cant compare vs Cambium ePMP 1000/2000 because cambium have TDD 75:25 ratio & this TDMA WORKS for 50 CPE units easy. Mikrotik TDMA NV2 TDD 50/50 only & max20-30 stations. For new 6.8 MIkrotik NV2 useless , only pure 802.11N can gave 50% wifi real speed. But soon we can use mikrotik CPE & cambiu...
by CyB3RMX
Tue Nov 28, 2017 7:32 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 26701

Re: AC equipment and spectral scan problem

Mikrotik doesnt interest in this Feature. This is The hard truth. We will Never See: GPS NV2 with selectable Rates like 75/25 802.11ad And much more, because Wireless is not longer Main Focus for Mikrotik Products. We have seen it The Last years, Why SXT ac releases more then 3 years before Omnitik...
by CyB3RMX
Tue Nov 28, 2017 7:25 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 26701

Re: AC equipment and spectral scan problem

It looks like we can implement Spectral Scan, but it will take some time. It is on our to-do list
more than 3 years and counting :(
by CyB3RMX
Fri Oct 13, 2017 10:27 pm
Forum: General
Topic: Mikrotik NetMetal 3x3
Replies: 2
Views: 513

Re: Mikrotik NetMetal 3x3

I have only seen on sectorial antennas...

https://www.rfelements.com/products/ant ... ier-class/
by CyB3RMX
Fri Oct 13, 2017 10:17 pm
Forum: General
Topic: L2TP/IPSec for MacOS
Replies: 3
Views: 2835

Re: L2TP/IPSec for MacOS

You need to add a proposal and a peer on IPSec. Try this: /ip ipsec proposal set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des lifetime=8h pfs-group=none /ip ipsec peer add dh-group=modp1024 generate-policy=port-strict secret=VerySecretPasswordHere And in your mac when you need to...
by CyB3RMX
Fri Oct 13, 2017 9:30 pm
Forum: General
Topic: Mikrotik DNS Resolver IP
Replies: 2
Views: 742

Re: Mikrotik DNS Resolver IP

I don't think you can do that. The Cloud service is a DynDNS server, but you dont have control of your IP or the cnames you can assign to it. Assuming you have a DSL service, and you use 1.1.1.1 as public IP, the ISP is very likely to have this ip assigned to a Host name on their DNS. in our ISP we ...
by CyB3RMX
Fri Oct 13, 2017 6:40 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 2404

Re: VPN Mikrotik <-> Draytek. [SOLVED]

Hello! As far as i understand it refers to: My WAN iP: Draytek Tunnel IP Remote Gateway IP: MT Tunnel IP Remote Netowrk IP: MT Network Remote Network Mask: MT Network Mask Local IP: Draytek Network Local Network Mask: Draytek Network Mask My WAN ip: WAN address of the Draytek router Remote Gateway ...
by CyB3RMX
Fri Oct 13, 2017 6:02 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 2404

Re: VPN Mikrotik <-> Draytek. [SOLVED]

Hello! As far as i understand it refers to: My WAN iP: Draytek Tunnel IP Remote Gateway IP: MT Tunnel IP Remote Netowrk IP: MT Network Remote Network Mask: MT Network Mask Local IP: Draytek Network Local Network Mask: Draytek Network Mask My WAN ip: WAN address of the Draytek router Remote Gateway ...
by CyB3RMX
Fri Oct 13, 2017 2:42 am
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 2404

Re: VPN Mikrotik <-> Draytek. [SOLVED]

No one? perhaps i should ask on a Draytek forum instead right? (ifs theres one) .
I have never had an issue with mikrotik... this Drays**t Vigor are making me sick!

Thanks :)
by CyB3RMX
Thu Oct 12, 2017 10:03 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 2404

VPN Mikrotik <-> Draytek. [SOLVED]

Hello! Well, i have a client that in site A has a RB2011 and on Site B has a Drays**t Vigor 2860 with xDSL port connected to a DSL line. Here is a network map. netmap.png In SiteA the Mikrotik router its dialing to the Draytek using a DynDNS hostname and the tunnel its already up and running... the ...
by CyB3RMX
Wed Jul 19, 2017 7:48 pm
Forum: Virtualization
Topic: Metarouter unreliable
Replies: 7
Views: 1694

Re: Metarouter unreliable



I can't speak about openwrt support since we never used it.
What do you use then?
by CyB3RMX
Tue Nov 08, 2016 7:12 am
Forum: Scripting
Topic: Help with socifi script
Replies: 1
Views: 1018

Re: Help with socifi script

I found what was wrong, you can find it here..
http://forum.mikrotik.com/viewtopic.php ... 97#p567097
by CyB3RMX
Tue Nov 08, 2016 7:07 am
Forum: Scripting
Topic: Cannot run script
Replies: 2
Views: 997

Re: Cannot run script

Hello, i came across the same issue, and i solved it on a wAP using rOS 6.37.1 and i found that this particular router uses a "flash" prefix before the hotspot directory. so, the script should go like this: :global mac [/system routerboard get serial-number]; /file set flash/hotspot/login.html conte...
by CyB3RMX
Mon Sep 26, 2016 6:50 pm
Forum: Virtualization
Topic: CHR Licence migration.
Replies: 2
Views: 1192

CHR Licence migration.

Hello!
I'm planning to install with a P1 Licence a CHR on a Vritualbox system.. but it will be in this machine for about 3 -5 months only, im planning to upgrade my host server,
Do i loose the licence if i migrate the VDI image from the old server to the new?

Thanks in advance.
JB
by CyB3RMX
Sat Aug 27, 2016 2:30 am
Forum: Wireless Networking
Topic: RBLHG-5nD vs UBNT PowerBeam M5 400
Replies: 18
Views: 7741

Re: RBLHG-5nD vs UBNT PowerBeam M5 400

The mismatch depends on the antenna specs of each equipment. They use 2 chains and usually they manufacturer use 2 different polarities in the same antenna arrange, The antenna on V Pol and H Pol doesn't have the same radiation patterns and the same gain at the same frequency, that said, If you hav...
by CyB3RMX
Fri Aug 26, 2016 2:58 am
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 1565

Re: Get Identity and adrees from neighbor

If you're typing directly into terminal, you need to surround the thing with "{" and "}", so that it is treated as a single unit. The alternative is to enter it in a script at "/system script".
My hero!. hehe.. Thank you!!
by CyB3RMX
Fri Aug 26, 2016 1:47 am
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 1565

Re: Get Identity and adrees from neighbor

/ip neighbor print where identity~"^CPE\\-" is what you need to filter to only those with identies starting with "CPE-". And if you want to output them in a custom fashion, you can use the "as-value" argument. e.g. :local cpes [/ip neighbor print as-value where identity~"^CPE\\-"]; :foreach cpe in=...
by CyB3RMX
Thu Aug 25, 2016 8:02 pm
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 1565

Get Identity and adrees from neighbor

Hello! I'm making a script in bash on a linux box to list all CPE's on an AP. When i: /ip neigh pr I get all the info mixed, but i need to get Address and Identity but only of the ones that identity starts with CPE- I tried everything but just cant make it work. My way around will be to print terse ...
by CyB3RMX
Mon Aug 22, 2016 9:54 pm
Forum: Wireless Networking
Topic: RBLHG-5nD vs UBNT PowerBeam M5 400
Replies: 18
Views: 7741

Re: RBLHG-5nD vs UBNT PowerBeam M5 400

The mismatch depends on the antenna specs of each equipment. They use 2 chains and usually they manufacturer use 2 different polarities in the same antenna arrange, The antenna on V Pol and H Pol doesn't have the same radiation patterns and the same gain at the same frequency, that said, If you have...
by CyB3RMX
Mon Aug 22, 2016 9:33 pm
Forum: Wireless Networking
Topic: iPhones dropping wifi (CAPsMAN)
Replies: 30
Views: 8864

Re: iPhones dropping wifi (CAPsMAN)

Do you have an error message on the log?
by CyB3RMX
Mon Aug 22, 2016 9:29 pm
Forum: RouterBOARD hardware
Topic: RouterBoard LHG Mounting.?
Replies: 4
Views: 920

Re: RouterBoard LHG Mounting.?

Thank Inox and Normis...

As they say... RFB (read the freaking book.) hehe..
by CyB3RMX
Fri Aug 05, 2016 8:05 am
Forum: General
Topic: Feature request for v7.x
Replies: 269
Views: 63587

Re: Feature request for v7.x

- TDD on wireless
- improvements on wireless side like beam forming
-
by CyB3RMX
Wed Jul 27, 2016 12:50 am
Forum: RouterBOARD hardware
Topic: RouterBoard LHG Mounting.?
Replies: 4
Views: 920

RouterBoard LHG Mounting.?

Hello We just got some RouterBoard LHG and they look really neat. When i was assembling it i came across with this metal piece and im not sure where it goes.. well, i see there are 2 cavities but there is only one metal piece so i'm unsure if is for giving some up/down tilt? or its needed for proper...
by CyB3RMX
Tue Jul 26, 2016 9:53 pm
Forum: Wireless Networking
Topic: Two antennas, not dual-pol...?
Replies: 7
Views: 886

Re: Two antennas, not dual-pol...?

I was correcting your assumption. You will get the answer from it: you can use the same antennas to get different polarisation if you orient them accordingly. Well, yes but keep in mind that if you use a higher gain antenna the vertical lobe will be reduced and if you turn the antenna on it side mi...
by CyB3RMX
Tue Jul 26, 2016 9:40 pm
Forum: Wireless Networking
Topic: Two antennas, not dual-pol...?
Replies: 7
Views: 886

Re: Two antennas, not dual-pol...?

I think that the intention of having 2 polarities is to have a better isolation in both chains when you use integrated antenna, in other words, when you use 2 chains in the same antenna arrange. I have used 2 Ver Pol sector antennas connected to a r52Hn with the proper separation and worked just fin...
by CyB3RMX
Thu Jul 21, 2016 2:52 pm
Forum: General
Topic: Basebox 2 + LTE HUAWEI ME909s-120 Not Recognized
Replies: 3
Views: 2097

Re: Basebox 2 + LTE HUAWEI ME909s-120 Not Recognized

I just have one.. but not i dont want to plug it on, because only have one antenna and im not sure if it needs the 2 of them to work.. can you please advice if i can only use the Main uFL connector? and leave the other one unplugged...
by CyB3RMX
Tue May 24, 2016 10:18 pm
Forum: General
Topic: Uptime Challenge!
Replies: 25
Views: 13369

Re: Uptime Challenge!

One busy AP
- Toughput of +/- 43mbps,
- 52 CPE's registered

on a RB711GA-5HnD running 6.29.1 for almost a year without reboot.
by CyB3RMX
Tue Jan 05, 2016 7:55 am
Forum: Beginner Basics
Topic: How to block certain websites for selected users
Replies: 8
Views: 12832

Re: How to block certain websites for selected users

Other way around is: Assuming you are using the default 192.168.88.1/24 on the router... Make the DHCP server pool available from 192.168.88.127 - 192.168.88.126254 this will give all devices dynamic ip address of that pool. Add your firewall rules on this subnet ( 192.168.88.127/25) to be blocked o...
by CyB3RMX
Tue Jan 05, 2016 7:35 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 50991

Re: RB3011 Block diagram?

cpu-used: 12%
cpu-used-per-cpu: 13%,12%
free-memory: 996832KiB

Of course there is no loop, but 3011 don't believe me:

did you send this to support? or only the forum?
by CyB3RMX
Wed Nov 18, 2015 7:14 am
Forum: Announcements
Topic: Winbox3.0 released!
Replies: 45
Views: 15662

Re: Winbox3.0 released!

Any uptade to use winbox 3 on rOS 6.33 on a Mac?

Thanks! :)
by CyB3RMX
Thu Sep 03, 2015 3:38 am
Forum: Wireless Networking
Topic: SXT and SEXTANT Antenna Pattern Data
Replies: 2
Views: 1373

Re: SXT and SEXTANT Antenna Pattern Data

Anyone? :(
by CyB3RMX
Sat May 30, 2015 9:55 am
Forum: The Dude
Topic: Netwatch probe.
Replies: 8
Views: 3407

Re: Netwatch probe.

No problem ! Thanks :) I dont think that rOS have an OID for the Netwatch. if i do this: /tool netwa print oid expected end of command (line 1 column 19) Just send and error, not the same as /int wire print oid 0 tx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.2.1 rx-rate=.1.3.6.1.4.1.14988.1.1.1.3.1.3.1 ssid=...
by CyB3RMX
Wed May 13, 2015 7:35 am
Forum: The Dude
Topic: Netwatch probe.
Replies: 8
Views: 3407

Re: Netwatch probe.

That wont do the job.. I have it this way... example.jpg The router its a RB493AH and there i have enabled Netwatch (/system netwatch), i do even have a script that sends me an email when one of the WAN are flapping or goes down or back on and change the mangle rules to avoid interruptions, but what...
by CyB3RMX
Sat May 02, 2015 8:43 pm
Forum: RouterBOARD hardware
Topic: CRS-125-24G-1S Neg & Link problems.
Replies: 2
Views: 547

CRS-125-24G-1S Neg & Link problems.

Hello, We bought a couple of this switches when it were released to test them, and really do the job at the office. I tried to deploy it in a cell, in this cell i have PtP with RB411AH, and multipoints with RB912x and works perfectly, but when i connected my Omnitik and 2 Sextant's (RB711 version) i...
by CyB3RMX
Thu Apr 30, 2015 8:02 pm
Forum: The Dude
Topic: Netwatch probe.
Replies: 8
Views: 3407

Re: Netwatch probe.

Sorry for the late reply, No, im using the /Tool -> Netwatch option on the router. Im using several WAN on the router, so i need to be able to see if one of them fails, right now i made a script that send me an Email and alert me, but i think its more practical to see it on the Dude, i have a Dedica...
by CyB3RMX
Mon Mar 16, 2015 12:23 am
Forum: General
Topic: Facebook Wifi
Replies: 38
Views: 16368

Re: Facebook Wifi

Bump!
by CyB3RMX
Thu Feb 26, 2015 12:30 am
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164088

Re: hAP lite

I found this pretty useful for residential use, seems a very reliable substitute for the WR841ND with OpenWRT i use now on residential clients.
When will be available, i really want a couple to test its performance.

Keep up the good job Mikrotik ;)
by CyB3RMX
Tue Jan 27, 2015 2:53 am
Forum: RouterBOARD hardware
Topic: Recover SXT from Firmware Update Failure?
Replies: 9
Views: 8647

Re: Recover SXT from Firmware Update Failure?

After i send this post i came up and tried one last thing, and for my surprise it WORKED!! I create a file called " upgrade.rsc" and i wrote in it: /system routerboard upgrade and save it, and then i put the SXT as NetInstall mode and on the Netinstall settings in the "Configure script" area, i choo...
by CyB3RMX
Tue Jan 27, 2015 2:42 am
Forum: RouterBOARD hardware
Topic: Recover SXT from Firmware Update Failure?
Replies: 9
Views: 8647

Re: Recover SXT from Firmware Update Failure?

I have 2 SXT that seems that the Routerboot has been corrupted, it only beeps once. I used NetInstall on it and everything looked ok, but when its done, it boot up and just beep again only once. I had one SXT that by pressing reset once while the first beep was on, it continued to boot but if you re...
by CyB3RMX
Wed Oct 29, 2014 7:25 pm
Forum: The Dude
Topic: Netwatch probe.
Replies: 8
Views: 3407

Netwatch probe.

Hello, Im don't consider myself as an advanced Dude User, but i have made some test without success. I hope you guys can help me: I have a router connected to 8 DSL services, I'am using netwatch and a route to a specific host so i can ping over each DSL, and email ifdown to check if they are up or d...
by CyB3RMX
Wed Jul 30, 2014 5:39 am
Forum: General
Topic: Hotspot - Login frequency.
Replies: 7
Views: 1403

Re: Hotspot - Login frequency.

Thanks @bajodel ....
Worked like charm, but i have a couple of clients that are using radius to login and im not using user profiles? where can i define this values?

Thanks in advance.

JB
by CyB3RMX
Wed Jul 23, 2014 2:34 am
Forum: General
Topic: Hotspot - Login frequency.
Replies: 7
Views: 1403

Re: Hotspot - Login frequency.

use cookies at IP - HOTSPOT
I have selected in the hotspot profile Cookies and http chap (defaults)

and cookie lifetime 1d.
by CyB3RMX
Wed Jul 23, 2014 2:34 am
Forum: General
Topic: Hotspot - Login frequency.
Replies: 7
Views: 1403

Re: Hotspot - Login frequency.

Take a look at hotspot session/keepalive/idle timeouts parameters .. The key is there
Thanks..i will take a look at.
by CyB3RMX
Tue Jul 15, 2014 7:44 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236705

Re: NOT TO DO. Weird instalations?

OK, this is my installation... but it's only a test! :lol: Look at the way I've set the grid!
Witch satellite you are aiming? hehe..! xD
by CyB3RMX
Tue Jul 15, 2014 7:43 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236705

Re: NOT TO DO. Weird instalations?

this umbrella stand has worked perfectly

Nice Freznel clearence.!
by CyB3RMX
Tue Jul 15, 2014 7:36 pm
Forum: General
Topic: Hotspot - Login frequency.
Replies: 7
Views: 1403

Hotspot - Login frequency.

Hi all! I have a couple of clients complaining about the frequency the login page shows up. For example they have an iPhone and login then check mail or something and they put it in standby, and then in 10 minutes need to check anything else and the hotspot asks again the login, so.. its there a way...
by CyB3RMX
Sat May 03, 2014 1:40 am
Forum: Scripting
Topic: How to get only what i need?
Replies: 5
Views: 1393

Re: How to get only what i need?

maybe this can help you ssh admin@ip.mikrotik ':foreach i in=[ip dhcp-server lease find ] do={; local ip [ip dhcp-server lease get value-name=address $i]; local hostname [ip dhcp-server lease get value-name=host-name $i]; put "$ip $hostname";}' > leases.txt Gracias!! That's what i needed! I will gi...
by CyB3RMX
Fri May 02, 2014 8:31 pm
Forum: Scripting
Topic: How to get only what i need?
Replies: 5
Views: 1393

Re: How to get only what i need?

No one? :(
by CyB3RMX
Fri May 02, 2014 5:50 pm
Forum: Scripting
Topic: How to get only what i need?
Replies: 5
Views: 1393

How to get only what i need?

Hello, I made a script in bash in a Linux box that will ssh the mikrotik and get the "/ip dhcp-server leases" Right now i am using this in the script to get the list: ssh user@mikroti.ip.address "/ip dhcp-server lease print terse" > /home/user/dhcp-list.txt And when i get all data, i process it with...
by CyB3RMX
Tue Mar 11, 2014 8:06 pm
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 102138

Re: Solving 20km wireless link issues

I don't think this has something to do with the distance. Signal should be around -51dBm with 28dBi antenna and 28dBm XR5 Transmitter. I think the problem it's that the Fresnel zone isn't clear enough and you are having a knife effect just like mramos clearly said. I think will help to put both ante...
by CyB3RMX
Thu Mar 06, 2014 5:43 pm
Forum: Wireless Networking
Topic: QRT-2 Really!?
Replies: 8
Views: 2818

Re: QRT-2 Really!?

This is only a possibility. You don't have to use it only with full power. You can set tx-power to lower values. It's like having a sports car. You can drive it slower than max on the speedometer ;) I know that, you are an responsible and educated person who know that, but there are a lot of people...
by CyB3RMX
Sun Mar 02, 2014 1:34 am
Forum: Wireless Networking
Topic: QRT-2 Really!?
Replies: 8
Views: 2818

QRT-2 Really!?

I mean, Really?... 3.1Watts on the transmitter? 35dBm.. i think its pointless. I have links on ptp on 2.4GHz running with R52 at 52mw of power at 7 mi link with a 19dBi directional antenna and i have an stable -67 to -68 dBm. Whats the point to that extra juice? I think would be better a higher gain...
by CyB3RMX
Tue Feb 18, 2014 6:49 pm
Forum: General
Topic: Routing Issue/PPPOE issue
Replies: 1
Views: 792

Re: Routing Issue/PPPOE issue

You are making NAT with a private ip address? so in the end you have 2 to 3 NAT's from the publip ip?

Why dont you just route all the reapeater segments and make one nat in the main gateway?.
by CyB3RMX
Tue Feb 18, 2014 6:43 pm
Forum: Beginner Basics
Topic: Dropping Pings
Replies: 1
Views: 465

Re: Dropping Pings

I dont think thats normal, but that depends on several factors.

What routerboard you are using?
by CyB3RMX
Fri Feb 07, 2014 10:45 pm
Forum: Wireless Networking
Topic: 802.11w
Replies: 3
Views: 1940

Re: 802.11w

This is just stupid from microsoft to force to use 802.11w with Win8 when the 99% of the AP in the market doesnt support it.

So whats the workaround? using WEP? or Buy a Cisco? this sucks!
by CyB3RMX
Wed Feb 05, 2014 6:34 pm
Forum: Wireless Networking
Topic: 802.11w
Replies: 3
Views: 1940

Re: 802.11w

No replies since Nov. 2013?
by CyB3RMX
Wed Feb 05, 2014 6:28 pm
Forum: Wireless Networking
Topic: Win8 can't connect to RB2011 wifi
Replies: 21
Views: 13192

Re: Win8 can't connect to RB2011 wifi

I found this, do you guys think the problem could be with something similar? Windows 8 may encounter a problem when trying to connect to the Cisco Unified Wireless Network. If the client is using WPA or WPA2 key management with AES encryption, then the connection may fail. With "debug client" in eff...
by CyB3RMX
Mon Oct 21, 2013 10:14 pm
Forum: General
Topic: SXT r2 5nD CPU 100%.
Replies: 0
Views: 675

SXT r2 5nD CPU 100%.

Hi there, Well like the subject says, i have a cpe on a client installed connected to a Omnitik and using nv2, perfect signal etc.. The CPE its configured to use a pppoe-client to connect to the internet and im making mascarade in the local network and running a DHCP server.. without traffic, and re...
by CyB3RMX
Tue Jun 25, 2013 8:56 pm
Forum: Wireless Networking
Topic: Omnitik nv2 setup
Replies: 7
Views: 2237

Re: Omnitik nv2 setup

Hi all, i have clients connected from 1 to 12km (.6mi to 7mi) JB 12km is little far for OmniTik. I had a 20dbi Sector from Ubnt, but the equipment that was doing the job died with a lightning storm. Someone stole our ground cable... :? The omnitik survived and i connected all the clients on it and ...
by CyB3RMX
Fri Jun 21, 2013 6:38 pm
Forum: Wireless Networking
Topic: Omnitik nv2 setup
Replies: 7
Views: 2237

Re: Omnitik nv2 setup

Many of your signal levels are far too low. This results in low air rates for the affected clients, which will lower your total throughput for all clients in return. Aim for -65dB RX-level (CPE and Omni). Use mikrotik linkcalc to estimate needed TX-Power and Antenna-type. Try to never go below -70d...
by CyB3RMX
Fri Jun 21, 2013 6:35 pm
Forum: Wireless Networking
Topic: Omnitik nv2 setup
Replies: 7
Views: 2237

Re: Omnitik nv2 setup

wds with NV2 ???????????????????????? As far as I am aware NV2 is incompatible with WDS , maybe I am out of touch. 80211 mode In advanced tab on CLIENTS ONLY HW retries 10 try rts/cts = self Hw. Protection threshold 512 aNi = ap and client Preamble long I do not know what your solution is if you ha...
by CyB3RMX
Fri Jun 21, 2013 12:04 am
Forum: Wireless Networking
Topic: Omnitik nv2 setup
Replies: 7
Views: 2237

Re: Omnitik nv2 setup

No one? :shock:
by CyB3RMX
Fri Jun 21, 2013 12:03 am
Forum: Wireless Networking
Topic: RB951G-2HnD cannot get 300mhz
Replies: 19
Views: 5883

Re: RB951G-2HnD cannot get 300mhz

Yeah, thanks for making this informative and helpful for others!

I will start a tread in Mayan , latin or Swahili just to make a point...

This is an English forum, it's not my first language either but it's the one that all can understand.

JB
by CyB3RMX
Thu Jun 20, 2013 9:35 pm
Forum: Wireless Networking
Topic: Omnitik nv2 setup
Replies: 7
Views: 2237

Omnitik nv2 setup

Hi all, Well i have a cell in a rural area with clean channels so i put an omnitik and i have clients connected from 1 to 12km (.6mi to 7mi) The clients are all Mikrotik of course (otherway we cant enable nv2) they are mostly Sextant 5HnD but i have a few 411AH with XR5 with a 23dBi panels (the fare...
by CyB3RMX
Thu Jun 20, 2013 9:07 pm
Forum: Wireless Networking
Topic: HotSpot. injecting js, and dynamic dns name
Replies: 3
Views: 1294

Re: HotSpot. injecting js, and dynamic dns name

>How i can injecting javascript file to http traffic for showing ads.<

Mail me at
augustus_meyer@yahoo.de

I have a solution, in production already.
Why the mistery?

why you no post the solution? we may be interested too.

regards.
by CyB3RMX
Mon Apr 01, 2013 8:41 pm
Forum: Beginner Basics
Topic: Really SLOW wireless
Replies: 20
Views: 3287

Re: Really SLOW wireless

Try this: Make a survey to check what its the cleanest channel and use it, remember that in 2.4GHz only 1, 6 and 11 wont interfere with each other so you need to select the most clear and see that the nearby channels are clear too. Change the chanel Make sure that you Point the antenas like this -> ...
by CyB3RMX
Fri Mar 15, 2013 6:39 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

this is what i was looking for... thanks.. im pretty sure that was it..

The problem stoped, i migrated all to a 802.11n based system + NV2 on 5Ghz. so its more secured than the last one.
by CyB3RMX
Fri Mar 15, 2013 6:36 pm
Forum: General
Topic: masquerade bug?
Replies: 2
Views: 485

Re: masquerade bug?

Update.
I have 10.2.102.0/24 as the pppoe pool, i just added the 10.2.102.253 to the AP and 10.2.102.2 to my laptop (whitch its connected with a sextant on station bridge) and the masquerade seems to work, so the problem its with the pppoe and masquerade.
by CyB3RMX
Fri Mar 15, 2013 6:07 pm
Forum: General
Topic: masquerade bug?
Replies: 2
Views: 485

masquerade bug?

Hi there, I just setup a RB711GA-5HnD to be an Access point with rOS 5.24, on the Ether side it have a public ip address and on the wlan side i have a pppoe server using radius auth, i also have wds enabled, because i have 2 mini cells conected to this AP and i need them bridged on the ether1 networ...
by CyB3RMX
Mon Feb 11, 2013 7:37 am
Forum: The Dude
Topic: Dude for Linux
Replies: 49
Views: 36496

Re: Dude for Linux

more people use windows than linux, it's a fact. we have very few requests like this, less than one per month. use Wine, it works perfect. i agree with you, most people use windows, but if RouterOS is linux based, and it support the dude server, how diffucult its to release a Dude server for linux?...
by CyB3RMX
Mon Feb 11, 2013 7:34 am
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 102138

Re: Solving 20km wireless link issues

maybe something industrial/military ? or commercial stuff improperly installed ? If you had spectrum analyzer, GNURadio, WinRadio with this band module and etc - you can actually get some details. but generally only feds had hardware and experience to locate this both in time, frequency and locatio...
by CyB3RMX
Mon Feb 11, 2013 7:31 am
Forum: Wireless Networking
Topic: Solving 20km wireless link issues
Replies: 147
Views: 102138

Re: Solving 20km wireless link issues

at a regular time and daily? I have never known the sun to be that specific with it schedules. Anyways, it may be something else, but i doubt it is the sun. One question though, I'd like to know if those sextants work better then the UBNTs, i'm trying to get my boss to use the Mtik equipment over t...
by CyB3RMX
Fri Nov 16, 2012 6:12 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

Sounds perhaps like a CAM Table attack ? I don't know if it's possible on the Mikrotik but on the Cisco switches I've used we used to enable Port Security to limit the amount of macs that can associate to a single port.
on wireless?
by CyB3RMX
Fri Nov 16, 2012 6:08 pm
Forum: Wireless Networking
Topic: Detecting loop on wds...
Replies: 9
Views: 2924

Re: Detecting loop on wds...

Whats the difference between stp and rstp, i know one is faster that the other, but this impact on cpu? or performance witch is better?

regards
by CyB3RMX
Fri Nov 16, 2012 7:57 am
Forum: Wireless Networking
Topic: Detecting loop on wds...
Replies: 9
Views: 2924

Re: Detecting loop on wds...

Did ou locate in witch sector is the problem?,
Do you see unusual bandwidth load?
Look at your arp Table, to see if there any duplicated Mac.
by CyB3RMX
Fri Nov 16, 2012 7:52 am
Forum: Wireless Networking
Topic: Btest mikrotik vs real bandwidth
Replies: 21
Views: 8380

Re: Btest mikrotik vs real bandwidth

Are you using any simple queue?
by CyB3RMX
Fri Nov 16, 2012 7:44 am
Forum: Wireless Networking
Topic: Installing Hotspot with RB433 and Omni antenna
Replies: 1
Views: 889

Re: Installing Hotspot with RB433 and Omni antenna

Hello, Well, first of i will put on the ether, the dhcp clientor a static ip to get the router to the internet, make s Ping to a external site so you are sure the router its online. Once its online you should put an ip address on the wlan interface. Example: 172.16.1.254/24 Then go to ip-hotspot and...
by CyB3RMX
Fri Nov 16, 2012 7:15 am
Forum: Wireless Networking
Topic: Hiding SSID but someone is using wlan
Replies: 3
Views: 671

Re: Hiding SSID but someone is using wlan

Yes, there are tools to know the ssid, if you want to connect only 1 or more stations, i suggest unchecking the "Default authenticate" and put manually your stations Mac address on the access list. This will only let auth and connect the macs you listed. Even this way is possible to get it. The best...
by CyB3RMX
Tue Nov 13, 2012 7:33 pm
Forum: RouterBOARD hardware
Topic: R52 & R52H Power ?
Replies: 5
Views: 2404

Re: R52 & R52H Power ?

output power != link quality
Amen to that, im not sure why you guys release a RB-SXT-5HPnD (1.25W - 31dBm power output).

this didnt compromise quality?.
by CyB3RMX
Wed Aug 15, 2012 6:40 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

This was one of my first equips, its running 802.11b 200mW PRISM cards, but for the amount of clients on that area i didnt put it much attention, but now that area is growing so in the same pop there is a 5Ghz sector with NV2 + nStreme Encrypted and with the Ssid hidden. So im migrating all my clien...
by CyB3RMX
Tue Aug 14, 2012 6:01 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

i just cant believe no one can answer anything, i found this weird... anyway thanks again..

:?
by CyB3RMX
Fri Aug 10, 2012 7:39 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

Today i got another 80's Xerox connecting to my AP ?!
by CyB3RMX
Fri Aug 10, 2012 6:49 pm
Forum: RouterBOARD hardware
Topic: RB951-2n video ad
Replies: 11
Views: 6439

Re: RB951-2n video ad

fancy... hehe
by CyB3RMX
Fri Aug 10, 2012 6:32 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

Im pretty sure now this is an attack, yesterday i found this MACS on my reg table and please, this mac 00:00:00 belongs to 80's Xerox devices..
by CyB3RMX
Fri Aug 10, 2012 2:29 am
Forum: General
Topic: Winbox Suggest to Dev. Team.
Replies: 4
Views: 721

Re: Winbox Suggest to Dev. Team.

btw, i wrote to support and they told me they have plans to add it, im not the first guy who asked for it hehe..
by CyB3RMX
Fri Aug 10, 2012 2:27 am
Forum: General
Topic: Winbox Suggest to Dev. Team.
Replies: 4
Views: 721

Re: Winbox Suggest to Dev. Team.

You can use The Dude to make a network map. From there you can connect to each Mikrotik device using the context menu. I use Dude server as a live network monitor, but i dont see it practical, because i dont monitor my clients but i do have it on my winbox list, so if i had folders on the winbox wi...
by CyB3RMX
Mon Jul 30, 2012 9:56 pm
Forum: Wireless Networking
Topic: Best ACK timeout for wifi hotspot,
Replies: 3
Views: 1489

Re: Best ACK timeout for wifi hotspot,

indoor will be best i think. i have a lot of issues, with 5.X and hotspots with a lot of users, and no control on devices loging in. Try use 4.17. Set data rates to a low rate, and use access list, to deny bad signal. Also better to use only g, not b/g. Both AP's are running 4.17, and thanks i had ...
by CyB3RMX
Mon Jul 30, 2012 7:08 pm
Forum: Wireless Networking
Topic: Best ACK timeout for wifi hotspot,
Replies: 3
Views: 1489

Re: Best ACK timeout for wifi hotspot,

Anyone?
by CyB3RMX
Sun Jul 29, 2012 7:27 am
Forum: Wireless Networking
Topic: Best ACK timeout for wifi hotspot,
Replies: 3
Views: 1489

Best ACK timeout for wifi hotspot,

Hi, i have 2 rb411ah with r52 radios in a Pool area in an hotel, By default the ack timeout was dynamic, and the connections really sucked,The communication between the ap and the clients was to slow, ( most of them ipads and other handheld dvices,), so i change it to indoors and that improved a lot...
by CyB3RMX
Thu Jul 26, 2012 8:20 pm
Forum: General
Topic: Winbox Suggest to Dev. Team.
Replies: 4
Views: 721

Re: Winbox Suggest to Dev. Team.

Anyone else with this issue?

JB
by CyB3RMX
Thu Jul 26, 2012 7:40 pm
Forum: General
Topic: Winbox Suggest to Dev. Team.
Replies: 4
Views: 721

Winbox Suggest to Dev. Team.

Hi all, I have more than 600 Mikrotik devices, so you must imagine my winbox list how big it is and how difficult is to find someone in some cases. My suggestion is to put folders in the WinBox list so we can save our devices by name in their folder, and made it like a folder tree. Hotel Client (<--...
by CyB3RMX
Sat Jul 14, 2012 8:21 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

Sounds like everyone driving by that has a cell phone or a laptop hits it.
im not pretty sure about that because all the clients are registered and stands like if theres a crowd near the AP. anyway.. im migrating this cell to 5GHz with NV2 so this problem soon will be solved..

thanks
by CyB3RMX
Fri Jul 06, 2012 9:22 pm
Forum: Beginner Basics
Topic: rb411 setup
Replies: 4
Views: 2915

Re: rb411 setup

what you need is to use station pseudobridge, then add a bridge between ether1 and wlan1 and you are done.. ;) 802.11 doesnt allow to bridge on the station side.. :) this is like a bridge but, no matter what you connect on your ether1 side the AP will see only 1 mac address, the wlan1 one. Regards!
by CyB3RMX
Fri Jul 06, 2012 8:30 pm
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

You could use the access list to drop anyone with weak signal, but that would likely be a ton of work compared to just enabling encryption. Best bet is to encrypt it. There is a reason that would be the first bit of advice. An easy way to reconfigure the encryption remotely is set up a virtual AP a...
by CyB3RMX
Fri Jul 06, 2012 2:52 am
Forum: Wireless Networking
Topic: Wireless table meanings and values
Replies: 2
Views: 589

Re: Wireless table meanings and values

As far as i know, The TX/RX rate, CCQ and the Signal level depends of the traffic its passing by through the link, it has to be some traffic to give you a more certain data. P Throughput its, if im not bad, its the possible Throughput available with those wireless conditions. TX/RX Signal when you h...
by CyB3RMX
Fri Jul 06, 2012 2:42 am
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Re: Attack?

or any way i can make a wild card?. i have only Ubnt and Mikrotik CPE...so the mac address all start with 00:15:6D -> 00:0c:42 -> 00:27:22 ... so the others are'nt mine.. I know you may be thinking, why dont you put WPA2 or something, thats because i have this ap almos 80 mi from here and its a lot ...
by CyB3RMX
Fri Jul 06, 2012 2:36 am
Forum: Wireless Networking
Topic: Attack?
Replies: 16
Views: 3340

Attack?

Hi there, First of i know there are a few work arounds to this problem like adding security on the network, but i want to know if this is any kind of attack?. I have a 21m tower on the highway, it have 2 r52 radios on a 532A Routerboard, works great but lately, it has hotspot and a pppoe server runn...
by CyB3RMX
Fri May 18, 2012 9:39 pm
Forum: RouterBOARD hardware
Topic: sextant poor antenna 0 for 2
Replies: 12
Views: 3397

Re: sextant poor antenna 0 for 2

I just bought 38 of them...

i'm going to install the first Sextant P2P on monday.. 6 Km. i let you know my results.

Greetings.
by CyB3RMX
Tue Mar 13, 2012 10:10 pm
Forum: Wireless Networking
Topic: Wireless Access-list Wildcard.!
Replies: 3
Views: 792

Re: Wireless Access-list Wildcard.!

Hi there guys, I have an open network with a 532A and 2 2.4GHz antennas, the network its open and uses hotspot and pppoe to auth, the problem is that next to my tower they build a school and i have a bunch of mobile devices connected to the wlans and the performance of the 532 goes down..! i use on...
by CyB3RMX
Tue Mar 13, 2012 10:01 pm
Forum: Wireless Networking
Topic: Wireless Access-list Wildcard.!
Replies: 3
Views: 792

Wireless Access-list Wildcard.!

Hi there guys, I have an open network with a 532A and 2 2.4GHz antennas, the network its open and uses hotspot and pppoe to auth, the problem is that next to my tower they build a school and i have a bunch of mobile devices connected to the wlans and the performance of the 532 goes down..! i use onl...
by CyB3RMX
Sat Mar 10, 2012 8:15 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 380
Views: 236705

Re: NOT TO DO. Weird instalations?

My sattelite signal is HELL!!!
"Have you tried checking with the provider?"
This logo fail is even better :D

Thats a sexy LNB
by CyB3RMX
Sat Mar 10, 2012 3:19 am
Forum: Wireless Networking
Topic: MAC filtering (access-list)
Replies: 9
Views: 2969

Re: MAC filtering (access-list)

Still anything?
by CyB3RMX
Sat Mar 10, 2012 3:17 am
Forum: General
Topic: Filtering Blackberry traffic
Replies: 4
Views: 1284

Re: Filtering Blackberry traffic

Hi, but how can i filter all the macs witch start with,
ie:
00:27:22:XX:XX:XX whats the syntax to do this.

Let me put this in another way, i want to block by the first 6 chars of the mac, but the other 6 could be anything, this is possible?..

Thanks!
by CyB3RMX
Mon Feb 27, 2012 9:55 pm
Forum: Beginner Basics
Topic: CLI question
Replies: 2
Views: 617

Re: CLI question

You helped me.. Like a sir!
Image

hehe, thank you!
by CyB3RMX
Sun Feb 26, 2012 7:49 pm
Forum: Beginner Basics
Topic: CLI question
Replies: 2
Views: 617

CLI question

Hi all... I have a question that i hope you can help me with. For example, Lets say i am in /interface/wireless/access-list And i have 10 macs in there that i want to put in forward=no I can do it like this: set 0,1,2,3,4,5,6,7,8,9 forward=no The question is, is there any way i can tell the first an...
by CyB3RMX
Thu Jun 30, 2011 7:07 am
Forum: RouterBOARD hardware
Topic: RB532x rOS support
Replies: 8
Views: 942

Re: RB532x rOS support

How do u feel thr performance?! Same as 2.9.51 or slower or maybe faster?
by CyB3RMX
Fri May 27, 2011 5:49 am
Forum: RouterBOARD hardware
Topic: RB532x rOS support
Replies: 8
Views: 942

Re: RB532x rOS support

Im asking because when the v4.2 (I think) was released I upgrade one and It won't boot again I couldn't make it come to life again, not even with net install

Thanks
by CyB3RMX
Thu May 26, 2011 7:16 am
Forum: RouterBOARD hardware
Topic: RB532x rOS support
Replies: 8
Views: 942

RB532x rOS support

Hi there
Does anyone know if the rb532x works fine with rOS v4.17 Or other v4.x?? Does it gets slow? Or what problem I can found on my way to upgrade?

Thanks in advance!
Cyb.