Community discussions

Search found 129 matches

by CyB3RMX
Thu Oct 04, 2018 8:47 pm
Forum: Wireless Networking
Topic: wireless PtP advice [SOLVED]
Replies: 8
Views: 438

Re: wireless PtP advice [SOLVED]

Sure a SXTsq Lite 5AC can do the job, just reduce the TX power on both sides to have around -50dbm on both sides and you should be able to pass over around 100mbps with those equipments.
regards.
by CyB3RMX
Thu Oct 04, 2018 8:09 pm
Forum: Wireless Networking
Topic: New standard 802.11ax
Replies: 15
Views: 2876

Re: New standard 802.11ax

Really? 160Mhz channels ? they are trying to make 5ghz the new 2.4ghz? or whats the deal?
by CyB3RMX
Mon Sep 10, 2018 6:26 pm
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 243

Re: SNMP issue... [SOLVED]

I just recall that the cpe is running a pppoe-client so the device is using the pppoe gateway.. I have a static ip address on the cpe which i'm using for management purposes, but when the pppoe is enabled all the output is going trough the pppoe gateway (which should be able to reach the server ip a...
by CyB3RMX
Mon Sep 10, 2018 6:15 pm
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 243

Re: SNMP issue... [SOLVED]

Hello.. Im graphing with mrtg some routers and some CPE, a couple of days ago, snmp stopped working on 3 routers, so i tought it was a routing issue since i was changing some stuff, but both devices, the mrtg server and the router are able to ssh, ping, etc.. just snmp does not work, even if i try ...
by CyB3RMX
Mon Sep 10, 2018 6:00 am
Forum: General
Topic: PowerBox Pro + wAPac Constantly Rebooting
Replies: 6
Views: 333

Re: PowerBox Pro + wAPac Constantly Rebooting

can you please run this and copy the output here..
/int ether export
by CyB3RMX
Mon Sep 10, 2018 5:43 am
Forum: General
Topic: SNMP issue... [SOLVED]
Replies: 3
Views: 243

SNMP issue... [SOLVED]

Hello.. Im graphing with mrtg some routers and some CPE, a couple of days ago, snmp stopped working on 3 routers, so i tought it was a routing issue since i was changing some stuff, but both devices, the mrtg server and the router are able to ssh, ping, etc.. just snmp does not work, even if i try c...
by CyB3RMX
Sun Aug 19, 2018 3:08 am
Forum: Wireless Networking
Topic: Decreased performance on nv2 slave APs
Replies: 1
Views: 216

Re: Decreased performance on nv2 slave APs

what version of rOS are you running?
by CyB3RMX
Sun Aug 19, 2018 3:04 am
Forum: RouterOS v7
Topic: Spectral-scan for AC devices.!
Replies: 6
Views: 599

Re: Spectral-scan for AC devices.!

Its easy to say, but when you have more than 2000 cpe deployed its not a matter of a couple of hundred dollars to change brands...a lot of them are still 802.11n based but migrating to 802.11ac has been a real pain in the ass, and yes in some of the POPs i have been installing some damaged SXT and B...
by CyB3RMX
Sat Aug 18, 2018 9:15 pm
Forum: RouterOS v7
Topic: Spectral-scan for AC devices.!
Replies: 6
Views: 599

Spectral-scan for AC devices.!

I think this is a MUST HAVE on all wireless devices, and even more for WISPs service providers that handles hundreds or even thousands CPE's and AP on the field. We've set out confidence on Mikrotik devices and a lot of WISP carriers use them, please take this serious.. the spectrum its getting crow...
by CyB3RMX
Sat Aug 18, 2018 7:50 pm
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT and two R11e-LTE
Replies: 1
Views: 483

Re: RB953GS-5HnT and two R11e-LTE

Maybe is a power issue, i had an issue similar problem when i plugged in a Huawei MiniPCI LTE card and enabled onboard wifi on a RB912, this command helped.
/system routerboard usb set type=mini-PCIe
regards.
JB.
by CyB3RMX
Fri Jul 20, 2018 9:47 pm
Forum: Wireless Networking
Topic: Any news on SpectralScan on AC Devices?
Replies: 2
Views: 309

Any news on SpectralScan on AC Devices?

Hi, Well, as the subject says, is there any news of the spectralscan feature on AC devices.? ..

i think its a "Must have" in todays crowded spectrums.

Thanks!
by CyB3RMX
Fri Jul 20, 2018 1:55 am
Forum: RouterBOARD hardware
Topic: CRS317-1G-16S+RM: CWDM/DWDM SFP+ optics? [SOLVED]
Replies: 12
Views: 1840

Re: CRS317-1G-16S+RM: CWDM/DWDM SFP+ optics? [SOLVED]

Where do you get this updates ?
Thanks in advance!
by CyB3RMX
Mon Jul 09, 2018 8:55 pm
Forum: General
Topic: Is it possible to run a script on login?
Replies: 44
Views: 12504

Re: Is it possible to run a script on login?

:local currentBuf [ :toarray [ /log find message~"logged in from " || message~"login failure" ] ] ; I added "from" on the because i am running a PPPoE Server on this box and when a user connects it sends a false-positive alert (im using telegram instead of email)... when a pppoe user logs in you ge...
by CyB3RMX
Tue Jun 26, 2018 6:22 pm
Forum: General
Topic: Windows 10 and Winbox
Replies: 14
Views: 7976

Re: Windows 10 and Winbox

I have 3 laptops on field using WIN10 and the 3 of them are doing this, even running Winbox 3.15 with all the updates installed... its kind of annoying...
by CyB3RMX
Thu Jun 21, 2018 10:44 pm
Forum: General
Topic: Windows 10 and Winbox
Replies: 14
Views: 7976

Re: Windows 10 and Winbox

alguien soluciono el tema que winbox anda muy bien en windows 7 pero las pc nuevas no corren en el 7 me a traido muchos problemas, lei que se solucionaria en las versiones nuevas de winbox pero hasta la fecha no veo nada de nada he's asking that: "Does some one figure it out this winbox issue?, on ...
by CyB3RMX
Mon Apr 23, 2018 7:57 pm
Forum: The Dude
Topic: Sound notifications.
Replies: 0
Views: 207

Sound notifications.

Hello! I have a Dude Server running and have 2 users, one is full and the other is read only. I have a big screen at the middle of the office running a client with the read only user, the problem is when a node comes down, since the recent updates does not make the sound notificiation, but only if y...
by CyB3RMX
Thu Jan 04, 2018 8:10 pm
Forum: Wireless Networking
Topic: WAP60G 5GHz Support
Replies: 20
Views: 1457

Re: WAP60G 5GHz Support

Nop.. only 60Ghz.
Soon they will release an LHG60, with the same form factor of the LHG with a 60Ghz radio. Im not sure if they are using the same chip
by CyB3RMX
Thu Jan 04, 2018 7:04 pm
Forum: Beginner Basics
Topic: Why are ports 8291 and 8888 visible?
Replies: 3
Views: 351

Re: Why are ports 8291 and 8888 visible?

You can add this to your firewall to prevent port scanners to show the port open... /ip firewall filter add chain=input protocol=tcp dst-port=8291 in-interface="ether1" action=drop /ip firewall filter add chain=input protocol=tcp dst-port=8888 in-interface="ether1" action=drop Beware with the in-int...
by CyB3RMX
Fri Dec 01, 2017 1:15 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 10814

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

You did this tests without upgrading the CPEs ?.
regards
by CyB3RMX
Tue Nov 28, 2017 8:39 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 16
Views: 4430

Re: MU-MIMO?

LOL Cant compare vs Cambium ePMP 1000/2000 because cambium have TDD 75:25 ratio & this TDMA WORKS for 50 CPE units easy. Mikrotik TDMA NV2 TDD 50/50 only & max20-30 stations. For new 6.8 MIkrotik NV2 useless , only pure 802.11N can gave 50% wifi real speed. But soon we can use mikrotik CPE & cambiu...
by CyB3RMX
Tue Nov 28, 2017 7:32 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 22091

Re: AC equipment and spectral scan problem

Mikrotik doesnt interest in this Feature. This is The hard truth. We will Never See: GPS NV2 with selectable Rates like 75/25 802.11ad And much more, because Wireless is not longer Main Focus for Mikrotik Products. We have seen it The Last years, Why SXT ac releases more then 3 years before Omnitik...
by CyB3RMX
Tue Nov 28, 2017 7:25 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 169
Views: 22091

Re: AC equipment and spectral scan problem

It looks like we can implement Spectral Scan, but it will take some time. It is on our to-do list
more than 3 years and counting :(
by CyB3RMX
Fri Oct 13, 2017 10:27 pm
Forum: General
Topic: Mikrotik NetMetal 3x3
Replies: 2
Views: 368

Re: Mikrotik NetMetal 3x3

I have only seen on sectorial antennas...

https://www.rfelements.com/products/ant ... ier-class/
by CyB3RMX
Fri Oct 13, 2017 10:17 pm
Forum: General
Topic: L2TP/IPSec for MacOS
Replies: 2
Views: 1122

Re: L2TP/IPSec for MacOS

You need to add a proposal and a peer on IPSec. Try this: /ip ipsec proposal set [ find default=yes ] enc-algorithms=aes-256-cbc,aes-128-cbc,3des lifetime=8h pfs-group=none /ip ipsec peer add dh-group=modp1024 generate-policy=port-strict secret=VerySecretPasswordHere And in your mac when you need to...
by CyB3RMX
Fri Oct 13, 2017 9:30 pm
Forum: General
Topic: Mikrotik DNS Resolver IP
Replies: 2
Views: 480

Re: Mikrotik DNS Resolver IP

I don't think you can do that. The Cloud service is a DynDNS server, but you dont have control of your IP or the cnames you can assign to it. Assuming you have a DSL service, and you use 1.1.1.1 as public IP, the ISP is very likely to have this ip assigned to a Host name on their DNS. in our ISP we ...
by CyB3RMX
Fri Oct 13, 2017 6:40 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 1173

Re: VPN Mikrotik <-> Draytek. [SOLVED]

Hello! As far as i understand it refers to: My WAN iP: Draytek Tunnel IP Remote Gateway IP: MT Tunnel IP Remote Netowrk IP: MT Network Remote Network Mask: MT Network Mask Local IP: Draytek Network Local Network Mask: Draytek Network Mask My WAN ip: WAN address of the Draytek router Remote Gateway ...
by CyB3RMX
Fri Oct 13, 2017 6:02 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 1173

Re: VPN Mikrotik <-> Draytek. [SOLVED]

Hello! As far as i understand it refers to: My WAN iP: Draytek Tunnel IP Remote Gateway IP: MT Tunnel IP Remote Netowrk IP: MT Network Remote Network Mask: MT Network Mask Local IP: Draytek Network Local Network Mask: Draytek Network Mask My WAN ip: WAN address of the Draytek router Remote Gateway ...
by CyB3RMX
Fri Oct 13, 2017 2:42 am
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 1173

Re: VPN Mikrotik <-> Draytek. [SOLVED]

No one? perhaps i should ask on a Draytek forum instead right? (ifs theres one) .
I have never had an issue with mikrotik... this Drays**t Vigor are making me sick!

Thanks :)
by CyB3RMX
Thu Oct 12, 2017 10:03 pm
Forum: General
Topic: VPN Mikrotik <-> Draytek. [SOLVED]
Replies: 4
Views: 1173

VPN Mikrotik <-> Draytek. [SOLVED]

Hello! Well, i have a client that in site A has a RB2011 and on Site B has a Drays**t Vigor 2860 with xDSL port connected to a DSL line. Here is a network map. netmap.png In SiteA the Mikrotik router its dialing to the Draytek using a DynDNS hostname and the tunnel its already up and running... the ...
by CyB3RMX
Wed Jul 19, 2017 7:48 pm
Forum: Virtualization
Topic: Metarouter unreliable
Replies: 7
Views: 1346

Re: Metarouter unreliable



I can't speak about openwrt support since we never used it.
What do you use then?
by CyB3RMX
Tue Nov 08, 2016 7:12 am
Forum: Scripting
Topic: Help with socifi script
Replies: 1
Views: 881

Re: Help with socifi script

I found what was wrong, you can find it here..
http://forum.mikrotik.com/viewtopic.php ... 97#p567097
by CyB3RMX
Tue Nov 08, 2016 7:07 am
Forum: Scripting
Topic: Cannot run script
Replies: 2
Views: 820

Re: Cannot run script

Hello, i came across the same issue, and i solved it on a wAP using rOS 6.37.1 and i found that this particular router uses a "flash" prefix before the hotspot directory. so, the script should go like this: :global mac [/system routerboard get serial-number]; /file set flash/hotspot/login.html conte...
by CyB3RMX
Mon Sep 26, 2016 6:50 pm
Forum: Virtualization
Topic: CHR Licence migration.
Replies: 2
Views: 905

CHR Licence migration.

Hello!
I'm planning to install with a P1 Licence a CHR on a Vritualbox system.. but it will be in this machine for about 3 -5 months only, im planning to upgrade my host server,
Do i loose the licence if i migrate the VDI image from the old server to the new?

Thanks in advance.
JB
by CyB3RMX
Sat Aug 27, 2016 2:30 am
Forum: Wireless Networking
Topic: RBLHG-5nD vs UBNT PowerBeam M5 400
Replies: 18
Views: 5269

Re: RBLHG-5nD vs UBNT PowerBeam M5 400

The mismatch depends on the antenna specs of each equipment. They use 2 chains and usually they manufacturer use 2 different polarities in the same antenna arrange, The antenna on V Pol and H Pol doesn't have the same radiation patterns and the same gain at the same frequency, that said, If you hav...
by CyB3RMX
Fri Aug 26, 2016 2:58 am
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 898

Re: Get Identity and adrees from neighbor

If you're typing directly into terminal, you need to surround the thing with "{" and "}", so that it is treated as a single unit. The alternative is to enter it in a script at "/system script".
My hero!. hehe.. Thank you!!
by CyB3RMX
Fri Aug 26, 2016 1:47 am
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 898

Re: Get Identity and adrees from neighbor

/ip neighbor print where identity~"^CPE\\-" is what you need to filter to only those with identies starting with "CPE-". And if you want to output them in a custom fashion, you can use the "as-value" argument. e.g. :local cpes [/ip neighbor print as-value where identity~"^CPE\\-"]; :foreach cpe in=...
by CyB3RMX
Thu Aug 25, 2016 8:02 pm
Forum: Scripting
Topic: Get Identity and adrees from neighbor
Replies: 9
Views: 898

Get Identity and adrees from neighbor

Hello! I'm making a script in bash on a linux box to list all CPE's on an AP. When i: /ip neigh pr I get all the info mixed, but i need to get Address and Identity but only of the ones that identity starts with CPE- I tried everything but just cant make it work. My way around will be to print terse ...
by CyB3RMX
Mon Aug 22, 2016 9:54 pm
Forum: Wireless Networking
Topic: RBLHG-5nD vs UBNT PowerBeam M5 400
Replies: 18
Views: 5269

Re: RBLHG-5nD vs UBNT PowerBeam M5 400

The mismatch depends on the antenna specs of each equipment. They use 2 chains and usually they manufacturer use 2 different polarities in the same antenna arrange, The antenna on V Pol and H Pol doesn't have the same radiation patterns and the same gain at the same frequency, that said, If you have...
by CyB3RMX
Mon Aug 22, 2016 9:33 pm
Forum: Wireless Networking
Topic: iPhones dropping wifi (CAPsMAN)
Replies: 30
Views: 7371

Re: iPhones dropping wifi (CAPsMAN)

Do you have an error message on the log?
by CyB3RMX
Mon Aug 22, 2016 9:29 pm
Forum: RouterBOARD hardware
Topic: RouterBoard LHG Mounting.?
Replies: 4
Views: 725

Re: RouterBoard LHG Mounting.?

Thank Inox and Normis...

As they say... RFB (read the freaking book.) hehe..
by CyB3RMX
Fri Aug 05, 2016 8:05 am
Forum: RouterOS v7
Topic: Feature request for v7.x
Replies: 247
Views: 52891

Re: Feature request for v7.x

- TDD on wireless
- improvements on wireless side like beam forming
-
by CyB3RMX
Wed Jul 27, 2016 12:50 am
Forum: RouterBOARD hardware
Topic: RouterBoard LHG Mounting.?
Replies: 4
Views: 725

RouterBoard LHG Mounting.?

Hello We just got some RouterBoard LHG and they look really neat. When i was assembling it i came across with this metal piece and im not sure where it goes.. well, i see there are 2 cavities but there is only one metal piece so i'm unsure if is for giving some up/down tilt? or its needed for proper...
by CyB3RMX
Tue Jul 26, 2016 9:53 pm
Forum: Wireless Networking
Topic: Two antennas, not dual-pol...?
Replies: 7
Views: 697

Re: Two antennas, not dual-pol...?

I was correcting your assumption. You will get the answer from it: you can use the same antennas to get different polarisation if you orient them accordingly. Well, yes but keep in mind that if you use a higher gain antenna the vertical lobe will be reduced and if you turn the antenna on it side mi...
by CyB3RMX
Tue Jul 26, 2016 9:40 pm
Forum: Wireless Networking
Topic: Two antennas, not dual-pol...?
Replies: 7
Views: 697

Re: Two antennas, not dual-pol...?

I think that the intention of having 2 polarities is to have a better isolation in both chains when you use integrated antenna, in other words, when you use 2 chains in the same antenna arrange. I have used 2 Ver Pol sector antennas connected to a r52Hn with the proper separation and worked just fin...
by CyB3RMX
Thu Jul 21, 2016 2:52 pm
Forum: General
Topic: Basebox 2 + LTE HUAWEI ME909s-120 Not Recognized
Replies: 3
Views: 1712

Re: Basebox 2 + LTE HUAWEI ME909s-120 Not Recognized

I just have one.. but not i dont want to plug it on, because only have one antenna and im not sure if it needs the 2 of them to work.. can you please advice if i can only use the Main uFL connector? and leave the other one unplugged...
by CyB3RMX
Tue May 24, 2016 10:18 pm
Forum: General
Topic: Uptime Challenge!
Replies: 25
Views: 12381

Re: Uptime Challenge!

One busy AP
- Toughput of +/- 43mbps,
- 52 CPE's registered

on a RB711GA-5HnD running 6.29.1 for almost a year without reboot.
by CyB3RMX
Tue Jan 05, 2016 7:55 am
Forum: Beginner Basics
Topic: How to block certain websites for selected users
Replies: 8
Views: 11910

Re: How to block certain websites for selected users

Other way around is: Assuming you are using the default 192.168.88.1/24 on the router... Make the DHCP server pool available from 192.168.88.127 - 192.168.88.126254 this will give all devices dynamic ip address of that pool. Add your firewall rules on this subnet ( 192.168.88.127/25) to be blocked o...
by CyB3RMX
Tue Jan 05, 2016 7:35 am
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 47317

Re: RB3011 Block diagram?

cpu-used: 12%
cpu-used-per-cpu: 13%,12%
free-memory: 996832KiB

Of course there is no loop, but 3011 don't believe me:

did you send this to support? or only the forum?
by CyB3RMX
Wed Nov 18, 2015 7:14 am
Forum: Announcements
Topic: Winbox3.0 released!
Replies: 45
Views: 13623

Re: Winbox3.0 released!

Any uptade to use winbox 3 on rOS 6.33 on a Mac?

Thanks! :)