DHCPv6 relay on version 6.2 has a bug? =================================================================== Agent relay configured on HP 5500 Switch results in: 14:17:30 tb19 dhcpd: Relay-forward message from 2001:db8:21e:101::5 port 547, link address 2001:db8:21e:104:1000:1d32:0:1, peer address fe80...

Hi everybody!

- where can I find a example to set DHCPv6 relay?

- RouterOS DHCPv6 Relay works with the new isc-dhcp server v4.2.x?


thanks in advance

IPSec?

Hi everybody!
Do you have any prevision to apply this feature ?

*) dhcp ipv6 pd client - added option add-default-route;


I can't find this option....

Thanks a Lot!!!

Hi Everybody!!

Anybody knows if this

http://wiki.mikrotik.com/wiki/Setting_up_DHCPv6

works on Windows?

If no... anybody have an example to work on windows?


Thanks!!!

Hi,
I can not ping the IP installed in vlan id 20. In bridge mode the switch ping is OK. By switching to the vlan switch chip does not work. What's wrong?

Thanks

Hi, I put my vlan interface in master port and not work. My interface ether1 -> ether5 are switch1 where ether1 is the master port. My managed switch is connected on the ethe5. Look my rules: /interface vlan add arp=enabled disabled=no interface=ether1 l2mtu=1594 mtu=1500 name=VLAN_TEST use-service-...

Hi Dear!!! I'd like to configure 802.1Q for an virtual interface, where only the vlan will have the IP address only to routing.The example in the Wiki shows how to configure for access interfaces. In bridge mode works fine but when I enable the switch chip not work. I have five ports in the switch a...

Hi!

I have the same problem... Bridge mode the vlan works... in switch mode no


tks