MikroTik

RafGan

I tested this version on my CCR 1016 where MPLS and VPLS {LDP} is running. After 3 to 5 minutes router reboots and it keeps repating over and over. On version 7.12.1 everything is ok. Has anyone same experience? No error in log.

This same, but reboots about 10 seconds.

RafGan

RB1100dx4de reboots after few seconds, no supout.rif created, no time needed to do this.

RafGan

By the way, both my hAP ac2 and cAP are restarting with: 13:18:02 system,error,critical router was rebooted without proper shutdown, probably kernel failure 13:18:03 system,error,critical kernel failure in previous boot 13:18:03 system,error,critical out of memory condition was detected every few h...

RafGan

Discs names are changed. Dude, scripts, scheduler, smb and other settings to manual correct.

RafGan

Yeap, as I always read this forum before upgrade, this time I did not. My ac3 with ww2 is now bricked. Stable version, hahaha. Netinstall possible or is it completely bricked? If so, thats fukt EDIT: Looks like it is possible, just needs some perseverance Netinstall to 7.3.b37, configuration restor...

RafGan

Yeap, as I always read this forum before upgrade, this time I did not. My ac3 with ww2 is now bricked. Stable version, hahaha.
Netinstall using older version which worked before.
Or go immediately to 7.3b37.

Thank you for your answer, but I was made it many times from years.

RafGan

Yeap, as I always read this forum before upgrade, this time I did not. My ac3 with ww2 is now bricked. Stable version, hahaha.

RafGan

No CPU frequency settings and CPU resource print on RB1100Dx4de. Also from console.

RafGan

Wow. Okay, so you're discontinuing the Dude. It could be argued that disclosing the discontinuation of that solely by the forums is irresponsible, but whatever. The problem now is that you STILL have the 1100 Dude Edition listed as a current product. You are literally selling people a false bill of...

RafGan

We have not done work on the Dude for some time now. If it works for you, great, you can use it. But there is no active development on the Dude at the moment. It may resume in the future, it's not known. So, what for I have bought RB1100x4DUDE EDITION ebaut one year ago??? Tell your boss, that this...

RafGan

I can't made VPLS interface to running "R" state. Configuration from 6.49.2 was not modified. Any ideas?

RafGan

When The Dude server will be implemented in V7 ???

RafGan

Looks like advanced-tools package for arm is broken...

same here
installation of advanced-tools-6.48.3 failed: broken package

RafGan

The Dude problem. My device's custom images disappeared from unknown reason. I was trying to recover my Dude database, but i'v got this: /dude import-db file-dude.db status: import failed And all my job was go to the hell. Database is creating daily by scheduler and it was always working in older ve...

RafGan

Has anybody tested if is is working again in final 6.41?

I'm a little bit scared of testing it, because i could'nt find anything related to this in the changelog.

Yes, it is working again in 6.41

RafGan

They're just trying to achieve feature parity with the RADNSS "functionality" in IPv6. :roll: Maybe, but better is the enemy of good. Things, that works great a lot of time, should not be changed at the same time of major implements in one version of OS. DHCP server is a certain service i...

RafGan

If you are experiencing problems with DHCP on latest RouterOS version, then please do the following: 1) Run this command on router - "/system logging add topics=dhcp" 2) Renew DHCP client; 3) Generate supout file; 4) Send this file to support@mikrotik.com and provide problem description. ...

RafGan

If you are experiencing problems with DHCP on latest RouterOS version, then please do the following: 1) Run this command on router - "/system logging add topics=dhcp" 2) Renew DHCP client; 3) Generate supout file; 4) Send this file to support@mikrotik.com and provide problem description. ...

RafGan

DHCP server, DNS setings still does not work.

In my case, DNS servers are both from dhcp server and client, at all hosts in networks.
MT, please revert back it. I have several networks and some of them use DNS parental control access to the internet. I must use nat redirects and access lists.

RafGan

Support, I have found an issue with v6.41rc61 and DHCP. I have several networks and ip pools configured but have found that upgrading to the rc61 build the dhcp server is handing out DNS server that the ccr1036 is using. This is not the same list of DNS server client should use. I have test reverte...

RafGan

My static ports in all bridges just disappear after reboot on CAPsMAN controller router. RB2011UAS-2HnD ROS 6.41rc61. Also on SXT ac, clients are diconnected from time to time (every few minutes). In rc56 was perfect. New bugs? Do you have support output files from older RC where the static bridge ...

RafGan

Confirm.
DNS servers from router's /ip dns settings servers are "magicaly forwarded" to hosts in my network.

RafGan

My static ports in all bridges just disappear after reboot on CAPsMAN controller router.
RB2011UAS-2HnD ROS 6.41rc61.

Also on SXT ac, clients are diconnected from time to time (every few minutes). In rc56 was perfect.

New bugs?

RafGan

New created virtual AP added to the same bridge works good.
Magic.

In /bridge/hosts MAC adress of connected device is marked as Local. When device is connected to vAP, L dissapears.

RafGan

Hi.

My WLAN interface IN AP mode just stop forwarding any data (added to a bridge). I can access to my MT by ARP only.
Is something new that I'm missing in configuration?

Regards,
RafGan.

RafGan

Stop this debate and enjoy RC releases! Feel proud yourselves because you're helping Mikrotik in making best networking products ever seen! They let us be a part of the developement with the RC channel! As the others do? ;-) That is true. If you install RC, you must think about risk and revert back...

RafGan

My two STX 5AC are death after upgrade to this version! No access, so no suppot.rif. Tomorrow netinstall.

Netinstall to 6.34.4 - works good again

RafGan

My two STX 5AC are death after upgrade to this version! No access, so no suppot.rif. Tomorrow netinstall.

RafGan

Next problem with wireless-rep and 6.35rc: point to point - one bridge with eth & wlan on both sides. Two VLANs on bridge, one of them is a multicast VLAN (IPTV, IGMP on switch connected to AP), second VLAN is an unicast VLAN. When STB is off, unicast works really great - about 160Mbs (AC mode, ...

RafGan

I use 6.35rc26 wireless-rep (AP mode), my laptop (WIN7 INTEL wireless 5300AGN) had a lot of PING loss, when I changed to WIRELESS-CM2, everything is normal. Can reproduce this with 6.35rc31 on Basebox2. Switched back to WIRELESS-CM2 as well. I can confirm this issue. Two laptops Le... WiFi cards th...

RafGan

Hello.

After upgrade to 6.34rc20 I can't login on my router, x86 based - Winbox (both versions): login timeout, telnet/ssh: connection closed (after about one minute waiting). Without this behaviour, other jobs are OK. Router is far away from me.
Any help?

Regards,
RafGan

RafGan

RafGan - Normis is at MUM. Do not worry - he will be back soon

[/quote]

Now I don't worry, I'm happy

RafGan

In my testing (home) environment 6.28 works well for now.
But I have one little question - where is Normis ???

RafGan

We fixed the issue. We had accidentally released the incorrect userman package, please re-download the userman package now.

Still waiting for this file... Almost 12 hours is not equel to now... It is still not fixed...

RafGan

It is possible. On "master" MT in Scheduler: /tool user-manager database save name=um overwrite=yes :delay 15s /tool fetch address=xx.xx.xx.xx user=admin password=dupajeza mode=ftp upload=yes src-path=um.umb dst-path=um.umb :delay 15s /tool fetch address=yy.yy.yy.yy user=admin password=dup...

RafGan

Temporary fix for VLAN issue - provide static MAC address for the bridge it is on.

Doesn't help in bonding - made before upgrade to v6.6

RafGan

Try to connect AP directly to MT and run DHCP server on this port.
If other hosts have static IPs, I don't see any problem to run DHCP server on whole network with modified IP Pool range, or add to static addresses in DHCP server.
Also you can add another local IP network with DHCP server.

RafGan

the version 6.6 not working vlan on the bridge . if disable enable starts to work. After rebooting everything is repeated

In my case vlans are death on bonding interface. Disable/enable doesn't help - only VID change and back, turns to live again.
V 6.5 doesn't have this serious bug (!!!).

RafGan

We use MT in our core network, many of AP's and many more CP's.
I wonder what for do you need this informations?

RafGan

In my opinion: should use desktop or server version of ubuntu for squid? Server version - more stable, less consume of processor power. does squid really help for decrease traffic direct go thru WAN? Yes, with transparrent proxy (port 80 forwarded transparently to squid port and IP). You can do it a...

RafGan

And let me extend this question. What if I need to block traffic between interfaces and also block specific tcp ports on one vAP? (Let's say, allow only port 80 on vAP2) ? Thanks :-) In bridge filter are options to set IP, protocol and port. Make a modifications of rules and it should works fo you ...

RafGan

You can add a bridge filter rules to block traffic forwarding between interfaces, or only to/from one. For example: /interface bridge filter chain=forward action=drop in-interface=!eth1-WAN out-interface=vAP1 chain=forward action=drop in-interface=vAP1 out-interface=!eth1-WAN chain=forward action=dr...

RafGan

Intel PRO/1000 (e1000?) VLAN tagging fail :) 2 device="02:01.0" name="82547EI Gigabit Ethernet Controller (rev: 0)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1019" (OnBoard Intel Server Board...

Search found 43 matches