Netinstall won't work, as the reset button is not functioning at all.try NETINSTALL or RMA it
Take a look on the block diagram, and you see why it is not possible even at theoretical levelDepends totally on your configuration! As long if you turn off FW/NAT/CONNTRACK it can handle it.
The story was about a 1000/100 mbit/s connection.Hm as I see it right there will be more then one point that is not really matching inRB2011UiAS-2HnD-IN CPU bottleneck
this story here, sorry.
I must admit, I have to agree with you. I even say, it should have at least 3 times computing power to handle full duplex 1Gbit/s NAT.If RB850Gx2 will not be at least 2-3 times more powerfull than RB2011, don't even release it
Which one do you use? Can you give a link please?I put also some bracket for tilt the SXT-SA, I forget that at the lab...
30mbit is a little bit few from a device, which should generate lot more.I tested it some days ago with ROS 5.21, and got a little over 30mbit upload and download speed, with standard wireless settings.
Works ok for me
I use aes only. 130mbps downlink and ~105mbps uplink (or the opposite, depending on which side I see).Which kind of security do you use?
Do your clients connect with 130MBs uplink and downlink?
That's sad, because thats the only reason for me to upgrade from 5.4 @ RB450GProblem still remains in 5.7
According to this page it won't work, because RB450G won't work with larger packet then 1526 byte...sadly.I've got an RB450G acting as an L2TP client connecting to an RB493G. Both are at 5.5.
Both ends are tied into an EoIP bridge. Because of that, I've set the MRRU on both ends set to 1600