MikroTik

kiket

Thanks Chofex for you info.

Un saludo

kiket

Hi Chofex can you say me how do you install the IPCop with MK. Do you use one or two interface in IPCop Server?. Thanks. ------ Hola Chofex, mestoy interesado en realizar una instalación con MK y IPCop, si fueras tan amable te agradecería que me indicaras como has realizado la instalación. Has conec...

kiket

--- SOLVED ---

Hi all,

I have the same problem. I want to log the users IP in IPCOP (Squid).

Anyone can help us?.

Thanks in advance.

kiket

Thanks Chupaka.

kiket

Hi all, I have two users with a full access to ROS, can I obtain the password from one of they with other user with the same privileges. I know that can reset it and put another new but I want to know if can recover the password. I see the command get user admin password, but I don't know how it wor...

kiket

Hi Janisk, I fix datarate to 24Mb and work well but I have a doubt, as a solution you can set minimal datarate higher, but if by any chance some client will signal level will go beyond some bpoint it iwll be disconnected with extensive dataloss error, and that will degrade that AP, because of resend...

kiket

I have probably not explained well in the previous post, then I describe my current problem: I have a network with two customers using multicast I want them to reach each customer channels they select. The operation of the multicast protocol is correct and when there is a single client operation is ...

kiket

Thanks omega.

Kiket

kiket

Hi omega-00, How do you send you hi-def video? point to point, or point to multipoint? I have a mulitcast network to serve iptv but only send correctly to one client when the second get a channel it make a pixeled image on other client for a fews second. Thanks and sorry for the offtopic, ---SPANISH...

kiket

Hi all, I have a problem with multicast traffic in point to multi point links.When a client conected to an ap demand a stream it work well, but when the second client conected to the same ap demand another stream, it make pixeled image in two clients. I don't know because can be produced.I'm gratefu...

kiket

Thanks for your info, George.

Kike.

kiket

Thanks for your answers George and alexspils,

George, you have some different configs Ptp, you don't find any difference in processor 433AH (800Mhz) respect to 411? all two pull the same 60 Mb?.

thanks for all.

kiket

Thanks ghmorris,

60Mb with two RB333 in turbo mode in Pto-Pto.

Do you test rb411?.

Best regards,

Kike

kiket

Thanks Sergejs,

I'm interested in know the users experience with this equipment.The theory differs from the practice as we all know, and more in this field.

Best regards,

Kike.

kiket

Hi all,

Someone could say me how much throughput can obtain in wireless interface with RB411 and a RB433AH. I see the routerboard table comparison but I'm interested in wireless applications.

Best regards,

Kike.

kiket

Hi arielf,

I'm agree with Ibersystems, but a better choice is make it with ssh.

--Spanish--

Hola Arielf, como bien dice Martin la mejor opción es realizar tu propia aplicación y en lugar de utilizar Telnet, utiliza SSH para enviar el pass y user (encriptado).

Un saludo,

Kike.

kiket

Hi Egate,

Thanks for response. I'm using USERMANAGER, my question is for it.

Thanks.

kiket

I want to see what client and when was the last-seen, using the hotspot.

I use the print command to send all the users to a txt file, but I'm interested in keep in file only NAME and LAST-SEEN how can I make there (if it's possible).

Thanks in advanced.

Kike

kiket

Hi laurinkus, This is not the problem. I refer to the problem that if I connect with ethernet 2 routers using PIM I can send trought it for example 20Mb multicast traffic, but if I change the ethernet for Wireless, I can't send more than 10Mb!! (When in wireless test I can pull trought the link more...

kiket

Any news about wireless routing PIM problem? or am I the only one who have problems with it?. From the first release that support multicast go out 7 versions and the problem is there.

Thanks for all.

Kike

kiket

Hi, I'm working in that idea, but the problem is on PIM routing in Wireless interface. Can see this post: http://forum.mikrotik.com/viewtopic.php?f=1&t=19359 PIM work ok on ethernet interfaces but when I want to use it in Wireless interface ,can't send more than 3 Mpeg2 streams (10Mb) but the li...

kiket

I don't understand because AP have to TX twice the stream if it's multicast and send it from one interface. If 2 clients are connected to a single multicast group, then each client will receive its stream. But the AP will TX only ONE stream (the stream from single multicast group) because it use ONE...

kiket

Hi Diganet, I don't explained well in last post. Really don't have any difference, but in wireless we have to see that all the traffic from the server go trought the wireless links. For example if you have a RB600 on server, they can pull for example 30Mb and if you have two different client router,...

kiket

Hi Phendry,

I think the only issue in wireless is the broadcast. If 2 clients demand 1 different streams anyone, the 2 streams arrive all clients.

Kike

kiket

Yes, it's multicast.

kiket

Hi phendry,

If you use multicast routing, you can see in your server AP wireless interface 2Mb and 2Mb in any client. But can't send more than 11 Mb at the moment, since janisk fix it.

Kike

kiket

Hi Janisk,

Yes it work, I had something bad in my configuration, It seems work well. I will continue with my test.

Thanks,

Kike.

---- UPDATED ---

On EoIP can't use multicast routing, I think this is a temporal "solution" while you solve the problem with the routing pim.

kiket

Hi all!! The EoIP test don't work. I have make a BRIDGED EoIP tunnel between the 2 WLAN but don't work well. Only if I try to ROUTING with Eoip (I don't know if it's correct) it work well (when make Pto-Pto) but it does not adjust to my needed, because I want to make a Pto - MPoint, and when I make ...

kiket

Hi esn.toolz,

I can test it this weekend, but Janisk say me that "He is working on that and other problems connected with PIM implementation in RouterOS"

Best regards,

Kike

kiket

Hi Janisk,

I change the ROUTER A as station and the ROUTER B as apbridge/bridge, and the problem is the same. Router A as RP.

kiket

No one has a configuration similar to mine, or nobody uses multicast on their networks?.I think it's a basic config, and I'm sure that someone has done.

I Would be very grateful if someone could tell me if the same thing happens, I hope while mikrotik's support reply my mail.

Best regards,

Kike.

kiket

Hi Janisk,

I send this morning the supout.rif to support@mikrotik.com

Thanks in advance.

Kike.

kiket

Hi Janisk thanks to answer my question, I test all the options with Nstreme but don't get best results. See this picture from ROUTER A as RP, in WLAN1 PPS - TX 997 / RX 5 (Can you see in this picture what is the problem at the right when play the third stream) http://img251.imageshack.us/img251/9435...

kiket

Hi all, Thanks for your comments!!. I write now to comment another problem?¿. SCHEME VLC Server (6 MPEG2 STREAMS 22Mb traffic) ----- (ether1) ROUTER A RP (wlan1) ------ 0 Mb----- (wlan1)ROUTER B (ether1) ---- CLIENT (0 Mb traffic) When I make a bandwith test the link give me 40 Mbps,when I designate...

kiket

It's a problem in "REGISTER STOP". When no router receives a stream request, it should cancel the transmission.

I don't know if I have a bad config or is a mikrotik rc11 version bug.

If anyone have the same results or have any solution, post here it,please.

Best regards.

Kike

kiket

Hi all!! I update to rc11 and "leave channel" now work ok!!,but I have a question, is normal that have 15Mb of traffic in the point to point wireless link without play any stream?. I have a config like this: FIRST CONFIG == it's normal VLC Server (22Mb traffic) ----- (ether1) ROUTER A RP (...

kiket

Thanks Janisk!!! I will waiting to the rc11!!

kiket

Hi francescov,

I have made the wiki configuration,all the config work well unless the unic problem I have is that when the client (running VLC) stop playing the stream, the traffic doesn't stop.

Best regards,

Kike

kiket

I don't test the last release rc10 (have no changes about multicast), but I think in the next releases will be fixed.

Kike

kiket

Hi all,

nothing new about multicast problem??

janisk
Post subject: Re: multicast routing
PostPosted: 06 Nov 2007, 12:58

this is known problem (continues to transmit when it should end) and will be resolved in future releases

kiket

Thanks Janisk.

kiket

I'm interested in see another multicast config too.

I have a multicast config (similar to the wiki, 2 routers Pto-Pto), but when the client stop playing the stream, traffic don't stop!!.I use VLC server and viewer to test it. I use the demo 3.0rc9. Anyone with the same problem??

Best regards,

Kiket

kiket

Thanks jma_sp.

Si es por mi no te preocupes.

Un saludo,

Best regards.

kiket

Hi Normis, a good translation to Spanish is needed??.

Best regards,

Kiket

kiket

I'd like to take a look,

kiket01(at)gmail.com

thanks cmit.

kiket

Hi all, I test with limit-connection but this option work when an IP make some connection but not if they close a connection and then make a new. I solve my problem with this: ;;; DROP trafico SSH + 3 conexiones/min. chain=input protocol=tcp dst-port=22 connection-state=new src-address-list=3 conexi...

kiket

Thanks janisk and cmit, I don't want to limit a list of trusted IP (janisk) I want to limit the access in a minute from the same IP.Add this Ip to an address list and if it acces 3 times in a minute, drop. Cmit you are right, this is that I want. I go to see the connection-limiting option. Thanks.

kiket

Hi, I have a problem to secure a SSH connection, I don't want to put a static ip in the ssh service but but I want secure it from dictionary attacks. I think that the next iptables rules can work well in the box but I don't know what is the equivalent in MK iptables -N SSH_CHECK iptables -A INPUT -p...

kiket

Hi, I have the same problem that "hotspotsolution". Looking the 3Com switches I see the 2226 PWR http://3com.com/prod/es_ES_EMEA/detail.jsp?tab=features&sku=3C16490 and the 4400 PWR http://www.3com.com/prod/es_ES_EMEA/detail.jsp?tab=features&sku=3C17205-US Anyone hadve tested it on...

kiket

Hi all!! I have a questian for everybody, What about Gigwifi??? I see in Spain some wholesalers who say that they are testing with equipment gigawifi!! in two or three month they want to sell equipment with a 100,200,and 400Mbps throughput. It is a reality or pure marketing?? somebody of you know an...

kiket

Sorry for the OFF TOPIC,

Denis, what program do you use to make that diagram??

Best regards

kike

kiket

Hi matt,

I all wireless material buy in Barcelona or Madrid, if you are interested I can say some address.

Best regards.

kiket01 [at] hotmail.com

kiket

Hi matt,

I'm from Valencia but I don't work with mikrotik

but If you need any info from here, say me it.

Best regards

Kike

kiket

Thanks marksx for your info.

Un saludo

Kiket

kiket

Hi marksx,

Thanks for your explanation, but... 14m of cable?use CNT-400 from Andrew in this length too?I think that this is similar to lmr400, it's right?.Do not attenuation too much 14m of cable?

I'm very interested in your installation.

Un saludo

Kiket

kiket

marksx:

What length has antenna cables in this picture?

Great installation.

Best regards

Kiket

Search found 56 matches