MikroTik

ab130kd

News about mqtt and mqtts?
Mikrotik could think develop a tool for iot and dedicating devices, exactly like years ago he started with the rb112 or rb532 when WiFi cards were only PCMCIA....

ab130kd

after Upgrade, if i try to enter on a CPE mikrotik via mac-telnet the response is always: "Login failed, incorrect username or password Connection closed" If i use IP, first time tell wrong password, second time I can enter. The problem occured after upgrade 6.45.xx . I try with winbox 3.1...

ab130kd

Me too. Same problem.. Did you solve the problem?

ab130kd

ANY SOLUTION FOR ??? https://www.ripe.net/manage-ips-and-asn ... figuration
RIPE need certification....

ab130kd

Dear Sirs, After your post, I finally managed to configure the LTE card... Now I would try to send SMS using the RB2011, directly connected to ZTE MF8230, and NOT by using the ZTE software... Is it possible? The strange thing is that the ZTE card MF was immediately recognized by mikrotik as LTE inte...

ab130kd

I have the same problem on RB493G, RB750 and Metal... Please resolve because the auto reboot means for customers disservice..

ab130kd

Dear Sirs,
where could I buy a low cost machine to do optical fusion for fiber optics and OTDR ?
Thanks in advance,
Carlo

ab130kd

After upgrade version 5.23, the RB110AHx2 has problem about read system routerboard and settings and the system tell send supot file to mikrotik... After reboot ospf is very slow to learn route... This was happened on 2 RB1100AHx2... Did someone happen the same things? [admin@ROS]/system routerboard...

ab130kd

Hi

we are using these fellows.

http://www.e-s.nu/24volt.html

It is still a valid method?
Could you translate the page in english?

ab130kd

RTFM

which is the best?

ab130kd

I have installed openwrt thanks to MR. Liquidcz, because i have installed the packages and its repository from http://openwrt.wk.cz/trunk/mr-mips/...................... Now I'm working to configure bind as authoritative server dns for my network. Anybody could post configuration about named.conf fil...

ab130kd

Also me,
it is the presentation where I started to study MPLS/VPLS...
But I have a problem with vpls.. seems that with 5.xx version doesn't work wery well...
Carlo

ab130kd

@Luth,
Ciao Luciano,
Could you explaine a small example about a configuration only with mpls without vpls?
Ciao Carlo

ab130kd

could you explaine only a part of routing of BGP... I have not understand how could assign pubblic IP having a lot of pppoe server...
I cannot waste the resource of public IP...
carlo

ab130kd

Dear Samsung172,
I'm very interested to implement your network. I have implemented PPPoE centralized only to not waste public IP and hide the wireless network.
Could you post the configuration about your routing?
Thanks in advance
Carlo

ab130kd

I have asked to some trainer mikrotik and told me, like you, to find the problem in ospf.
Only a thing: it is possible that the routerborad where insists the ospf that have a different firmware (release 4.17 and 5.

, causes the problem?

ab130kd

In the network there are RB493AH, RB433AH and RB1100AH2 where there is routing ospf and mpls. Could you help me?
Thanks in advance,
Carlo

ab130kd

Dear Sirs, I have a large OSPF network and I'm changing the network from EOIP to VPLS to concentrate all client in PPPoE. The problem is that one router doesn't want redistribuite label, in fact the remote VPLS, of that router, is not running. In the ospf i have checked to redistribuite connected ro...

ab130kd

on AP normally I use 4.17, on RB711 the 5.05 or newer

ab130kd

Dear Ibersystems,
I have adopt your solution long time ago, but I'm looking for if there is another solution for working with access list on AP and rb711, because with old hardware (rb411, rb532...) this problem is inexistent.
Thanks in adavance,
Carlo

ab130kd

Dear Rodolfo,
I solved ..... the problem was the MPLS in OSPF... You must publish the connected routes in the Istance of OSPF... now all works.
Now I have another question...
the MTU in MPLS and in VPLS?
Thanks in advance
Carlo

ab130kd

OK,
I'm trying to implement PPPoE over VPLS but when I change in the bridge the interface from EOIP to VPLS, the PPPoE concentrator not authenticate the Clients. Could you help me?
Thanks in advance
Carlo

ab130kd

how did you resolve this problem?

ab130kd

Dear Sirs, I have a large network where SSID is the same on every AP, and CPEs are registered on AP with access-list. The problem is that the new CPE (with hardware rb711), if hear two or more AP with similar signal, wants register to a specific AP and not where I have registered on AP with the acce...

ab130kd

Dear Sirs, I have a RB1100AHx2 as concentrator PPPoE and a lot of tunnel EOIP over a big ospf network. Mikrotik set by default 1480 as MTU. Is it correct use 1480? If is not correct, how much must be and where must I change MTU, because on different message read different MTU. Where must I change th...

ab130kd

Dear Chupaka, I have a RB1100AHx2 as concentrator PPPoE and a lot of tunnel EOIP over a big ospf network. Mikrotik set by default 1480 as MTU. Is it correct use 1480? If is not correct, how much must be and where must I change MTU, because on different message read different MTU. Where must I change...

ab130kd

I'm trying to create some users in usermananager that could use 2 hours connettivity per day.
How could I do?
I saw validity field and Uptime field but seems that when is finished the left time (2hours in my case), the next day the user cannot surf.
Where am i wrong?

ab130kd

how did you resolve this problem??? I'm trying to do the same thing... $API->write('/tool/user-manager/user/add',false); $API->write('=subscriber=admin',false); $API->write('=name='.$username,false); $API->write('=password='.$password,false); $API->write('=last-seen=never',false); $API->write('=cred...

ab130kd

Hi GRiffiN, I would use multiple gateways but I cannot masquerade the source IP because the IP are Public IP... The scenario is: There is a big wireless lan, with many client; the routing inside the wlan is based on OSFP; now the provider buy connection from second provider. The all IP are public. A...

ab130kd

Hi mike,
I would know if XR5 is fully compatible with mikrotik software..
Ciao Carlo

Ive tested these cards What you need to know?

Mike

ab130kd

we do a 33km radius currently, point to multi point, both sides SR2, one 15dbi omni, other 24dbi grid, low, stable pings of 4-6 ms, high mountain AP one end, other small hill I have a point to multipoint like you but some times i lose some pings and i don't know why... Could you tell me your config...

ab130kd

Dear Diego,
I had read on other topics that if you are using nstreme mode the value of ack becomes unnecessary...
I have a link at 2,4 ghz like you but mine works bad..
How is your MT setup?

ab130kd

I implemented a lan like point to multipoint, where there is an AP-Brige and 3 remote users far aboute 20 km.. The 3 different users are connected with 3 different WDS with tables of routing without forwading. I have big problems: -lose of pings; -low bandwidth about 4Mbps in test tcp-both directio...

Search found 33 matches

Re: MQTT client in routerOS

Mac telnet problem after upgrade... wrong password

Re: CCR 1036 goes to high CPU

Re: RPKI

Re: MF 823 LTE USB Modem

Re: Router reboots after MetaROUTER shutdown

Where buy Splicer Fusion Fiber Optics and OTDR ?

5.23 Problem on rb1100AHx2

Re: Switching Power Supply with Charger (UPS function)

Re: installed bind

installed bind

Re: MPLS VPLS neighbor

Re: MPLS VPLS neighbor

Re: MPLS VPLS neighbor

Re: MPLS VPLS neighbor

Re: MPLS VPLS neighbor

Re: PPPoE over EOIP

MPLS VPLS neighbor

Re: rb711 wants connect to different AP with quite similar s

Re: rb711 wants connect to different AP with quite similar s

Re: PPPoE over EOIP

Re: PPPoE over EOIP

Re: registration user automatic on UM

rb711 wants connect to different AP with quite similar signa

PPPoE over EOIP

Re: What is the Max MTU/MRT of EOIP over PPPoE connection ?

Set Uptime limitation in userman

Re: Userman end time editing?

Re: load balance problem, need help.

information

Re: 33km radius

using nstreme mode the value of ack becomes unnecessary

3WDS with distance of 30Km: Point to multipoints work bad