Community discussions

Search found 369 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 8
by ohara
Fri Jul 17, 2015 7:21 pm
Forum: RouterBOARD hardware
Topic: Working MicroSD for RB450G 6.28
Replies: 7
Views: 1234

Re: Working MicroSD for RB450G 6.28

Thanks for your comments. I use it for small daily DB backups.
by ohara
Sun Jul 12, 2015 4:17 pm
Forum: RouterBOARD hardware
Topic: Working MicroSD for RB450G 6.28
Replies: 7
Views: 1234

Re: Working MicroSD for RB450G 6.28

Hi purana, please let me know the sandisk card was working? Did you have time over the weekend to test? Much appreciated.
by ohara
Tue Jul 07, 2015 9:04 pm
Forum: RouterBOARD hardware
Topic: Working MicroSD for RB450G 6.28
Replies: 7
Views: 1234

Re: Working MicroSD for RB450G 6.28

just asking again? Are you using a microSD card with RB450G? can you please recommend what card it is? much appreciated.
by ohara
Mon Jun 22, 2015 9:23 pm
Forum: RouterBOARD hardware
Topic: Working MicroSD for RB450G 6.28
Replies: 7
Views: 1234

Re: Working MicroSD for RB450G 6.28

I tried a Medion 8GB card. The RB discovered the card, but it disappeared after a few attempts to format it. Any advice would be appreciated. Does anybody have experience with Kingston microSD and RB450G?
by ohara
Sun Jun 21, 2015 5:59 pm
Forum: RouterBOARD hardware
Topic: Working MicroSD for RB450G 6.28
Replies: 7
Views: 1234

Working MicroSD for RB450G 6.28

could anybody please recommend a microSD card that actually works with RB450G 6.28+ including brand and density? Much appreciated.
by ohara
Tue May 05, 2015 10:33 pm
Forum: General
Topic: One network, two DHCP servers - looking for advice
Replies: 7
Views: 1245

Re: One network, two DHCP servers - looking for advice

barkas, docmarius, Xen - I got it working today. Many thanks for all your advice!
by ohara
Fri May 01, 2015 4:56 pm
Forum: General
Topic: One network, two DHCP servers - looking for advice
Replies: 7
Views: 1245

Re: One network, two DHCP servers - looking for advice

docmarius, that's what I was looking for, thank you. could you please check if these rules will suffice? on router in site A (192.168.88.1) add action=drop chain=forward dst-address=192.168.88.2 protocol=udp src-address=192.168.88.1 src-port=67-68 on router in site B (192.168.88.2) add action=drop c...
by ohara
Fri May 01, 2015 4:18 pm
Forum: General
Topic: One network, two DHCP servers - looking for advice
Replies: 7
Views: 1245

Re: One network, two DHCP servers - looking for advice

Site A (192.168.88.1) - DHCP server pool 192.168.88.10-192.168.88.20
Site B (192.168.88.2) - DHCP server pool 192.168.88.21-192.168.88.30

is this what you are suggesting?
by ohara
Fri May 01, 2015 3:56 pm
Forum: General
Topic: One network, two DHCP servers - looking for advice
Replies: 7
Views: 1245

One network, two DHCP servers - looking for advice

Hi, I have two sites connected with a wireless link. Both sites are bridged and are on the same subnet 192.168.88.0/24. There is a DHCP server in site A. Problem description: when the wireless link is down, the devices in site B cannot reach the DHCP server in site A. Could you please recommend a se...
by ohara
Sat Nov 08, 2014 11:29 am
Forum: General
Topic: professional help wanted in Munich-Sendling
Replies: 6
Views: 1530

Re: Odp: professional help wanted in Munich-Sendling

Skype him on rivoli353 and see yourself ;p
by ohara
Mon Nov 03, 2014 9:03 am
Forum: RouterOS v6 RC and v7 BETA
Topic: What happen with 6.21 ?
Replies: 26
Views: 6105

Re: What happen with 6.21 ?

P.S. Where are those people coming from that suddenly (after 2 years) decided to upgrade from v5 directly to v6.21 ? :)
Could be those people who had a stable wireless network and decided to go with capsman. Anyhow thanks for the feedback...
by ohara
Sun Nov 02, 2014 11:07 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: What happen with 6.21 ?
Replies: 26
Views: 6105

Re: What happen with 6.21 ?

I have installed 6.21rc22 (build date: Oct/24/2014 10:29:23) on RB751G. It is a critical gateway router. Do you mind letting me know if I am save to upgrade to 6.22?
Thanks.
by ohara
Sat Nov 01, 2014 11:25 am
Forum: RouterOS v6 RC and v7 BETA
Topic: What happen with 6.21 ?
Replies: 26
Views: 6105

Re: Odp: What happen with 6.21 ?

Who said it was revoked?
by ohara
Mon Oct 13, 2014 7:40 pm
Forum: RouterBOARD hardware
Topic: Sierra MC8755 Lenovo 3G card is not recognized
Replies: 3
Views: 1087

Re: Sierra MC8755 Lenovo 3G card is not recognized

I too had a Sierra Wireless card - don't remember what model, but it was the only one which didn't work with any of my routerboards.
by ohara
Sun Oct 12, 2014 11:44 am
Forum: Wireless Networking
Topic: Explanation: 180Mbps-40Mhz/2S/SGI
Replies: 2
Views: 6079

Re: Explanation: 180Mbps-40Mhz/2S/SGI

Perfect, thanks.
by ohara
Sat Oct 11, 2014 9:55 pm
Forum: Wireless Networking
Topic: Explanation: 180Mbps-40Mhz/2S/SGI
Replies: 2
Views: 6079

Explanation: 180Mbps-40Mhz/2S/SGI

Can anybody please explain what this means in the wireless stats for AP client: 2S/SGI or 1S/SGI?

Many thanks.
by ohara
Fri Sep 26, 2014 11:27 pm
Forum: General
Topic: VPN project
Replies: 1
Views: 599

Re: Odp: VPN project

It's possible via vpn and without. Depending on the dvr system you can open rstp port 554 on firewall to access the stream online, or port 80 if your dvr has a webserver. Vpn is more save in general though.
by ohara
Sat Sep 20, 2014 11:21 pm
Forum: Beginner Basics
Topic: No DHCP when wlan disabled
Replies: 2
Views: 779

Re: No DHCP when wlan disabled

Go to IP>Addresses, then change the interface from 'wlan1' into 'bridge-local'.
by ohara
Sat Sep 20, 2014 10:37 am
Forum: RouterBOARD hardware
Topic: The perfect router for the home
Replies: 3
Views: 1691

Re: The perfect router for the home

I wanted to propose to Mikrotik to make a device for the perfect house with 1 or 2 USB 3.0 ports (or eSata port) with file sharing (Samba, FTP, and DLNA) and print server + wifi AC with a design similar to 951g with integrated antennas. It would be the perfect device and it would buy 100 units for ...
by ohara
Thu Sep 18, 2014 9:36 am
Forum: General
Topic: FTTH Network configuration advice
Replies: 13
Views: 3451

Re: Odp: FTTH Network configuration advice

I kind of know what you mean. Alternatively you can use vpn service provider for netflix. It is quite easy to set up in mikrotik and push traffic through the vpn interface to the roku IP in your network. Have you considered that?
by ohara
Wed Sep 17, 2014 10:01 pm
Forum: General
Topic: FTTH Network configuration advice
Replies: 13
Views: 3451

Re: Odp: FTTH Network configuration advice

Dont want to steal topic, however can you tell me what client or device you use for netflix?
by ohara
Tue Sep 16, 2014 10:49 pm
Forum: General
Topic: Plex from outside network
Replies: 4
Views: 2330

Re: Plex from outside network

in Plex go to: server>network>show advanced settings>List of networks that are allowed without auth

I had to set this up to access from a different subnet. Have a look on their forums too...
10.0.0.0/255.255.255.0,192.168.88.0/255.255.255.0
by ohara
Tue Sep 16, 2014 10:26 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 50265

Re: New hardware - mAP

The issue im trying to figure out is the user will not have access to the config page and needs a feedback that its connected to the wifi! I was thinking a beep script would have worked but looking at the posted hardware pictures i don't see any speaker built in! any advice on how to best do this? ...
by ohara
Tue Sep 16, 2014 10:08 pm
Forum: General
Topic: flow control settings
Replies: 1
Views: 1261

flow control settings

Can someone explain what rx-flow-control and tx-flow-control is good for? I have an android media player that has 100Mbps interface and it has got issues. I am tweaking ethernet settings with following commands, but can't see any difference in operation: 1. flow-control to auto. 2. Also auto-negotia...
by ohara
Sun Sep 14, 2014 12:21 am
Forum: Beginner Basics
Topic: Recomendation for outdoor acess point
Replies: 5
Views: 1110

Re: Recomendation for outdoor acess point

1. use a 90 degree sector antenna with high vertical beamwidth and any routerboard 2. use a omni antenna with high vertical beamwidth and any routerboard 2. alternatively use TL-WA7210N as it has 30 degree vertical beamwidth In each scenario the outcome will be very weak. Laptops and tablets will ev...
by ohara
Sat Aug 30, 2014 12:59 am
Forum: General
Topic: Newsletter 61
Replies: 35
Views: 24458

Re: Odp: Newsletter 61

If client have 4 to 6 rooms and 2 floors building then mAP is a little bit weak. It would not bad to have external radio output for antena connection.
It is perfect for such location. Because it is so small you can install 2 mAp on each floor and you have good coverage in the whole building.
by ohara
Thu Aug 28, 2014 8:08 pm
Forum: General
Topic: CRL size limit exceeded, ignoring
Replies: 15
Views: 3298

CRL size limit exceeded, ignoring

Could anybody explain what this means exactly and what are the CRL requirements in terms of limit/length? RB751G, ROS 6.19
by ohara
Sun Jul 20, 2014 4:44 pm
Forum: RouterBOARD hardware
Topic: New hardware - mAP
Replies: 154
Views: 50265

Re: New hardware - mAP

mAP should be 802.11ac, otherwise waiting doesn't pay off, no?
by ohara
Wed Dec 11, 2013 6:26 pm
Forum: Wireless Networking
Topic: SiSo in Cell MiMo
Replies: 4
Views: 1178

Re: Odp: SiSo in Cell MiMo

I would guess that he is asking what is the impact of using Groove as client with a MIMO access point.
by ohara
Sat Nov 23, 2013 4:17 pm
Forum: General
Topic: New Packet flow diagram
Replies: 103
Views: 71997

Re: Odp: New Packet flow diagram

MS Visio
by ohara
Fri Nov 22, 2013 8:18 pm
Forum: General
Topic: VoIP - Basic setup
Replies: 7
Views: 6554

Re: VoIP - Basic setup

Try to disable the SIP helper under /ip firewall service-port and try again. Alternatively set up a VPN.
by ohara
Thu Nov 21, 2013 3:39 pm
Forum: General
Topic: why this frequency chart have 2 sets of frequency band
Replies: 12
Views: 1695

Re: why this frequency chart have 2 sets of frequency band

I am not sure of the answer to your question. I would check how the card behaves in ROS 5.26 or 6.6 and contact support@dbii.com with further questions. Take care.
by ohara
Thu Nov 21, 2013 12:15 pm
Forum: General
Topic: why this frequency chart have 2 sets of frequency band
Replies: 12
Views: 1695

Re: why this frequency chart have 2 sets of frequency band

The only reference is on a balticnetworks PDF, DBii F28-PRO with AR5414:
http://www.balticnetworks.com/docs/Dbii ... Matrix.pdf

seems to me that if you don't have a similar second card it won't be much of use to you?
by ohara
Thu Nov 21, 2013 11:12 am
Forum: General
Topic: why this frequency chart have 2 sets of frequency band
Replies: 12
Views: 1695

Re: why this frequency chart have 2 sets of frequency band

Take a closeup picture of the card and post it here, we can then identify it. You might be a lucky owner of a 3GHz card from DBii. From balticnetworks description: "The card works by frequency shifting a standard 5Ghz Atheros Radio down to 3Ghz operation. Your operating system will see this card as ...
by ohara
Wed Nov 13, 2013 11:07 pm
Forum: General
Topic: Best vpn under NAT
Replies: 6
Views: 6131

Re: Odp: Best vpn under NAT

CTrain, thanks for sharing. I will give it a try as soon as time permits. However can you please provide a short explanation of the benefits of udp mode in openvpn over tcp mode? Thanks.
by ohara
Wed Nov 13, 2013 12:27 am
Forum: General
Topic: Best vpn under NAT
Replies: 6
Views: 6131

Re: Odp: Best vpn under NAT

CTain, can I contact you for a working copy of the owrt image with OpenVpn or metarouter, or can you post a link for download? Many thanks.
by ohara
Thu Nov 07, 2013 8:19 am
Forum: General
Topic: USB to USB
Replies: 4
Views: 745

Re: Odp: USB to USB

I don't think this will work.
The USB interface on the RouterBoards is only meant for flash drives, so they can be used as storage for logging or proxy.
also for gsm modem connection.
by ohara
Wed Nov 06, 2013 8:22 am
Forum: General
Topic: v6.5 OpenVPN Certificate Import BUG
Replies: 1
Views: 547

Re: Odp: v6.5 OpenVPN Certificate Import BUG

Wait for 6.6. It should be released shortly. And then post your feedback again, I am courious how to work with certificates in 6.6 because there were major changes to it.
by ohara
Thu Oct 31, 2013 11:36 pm
Forum: Wireless Networking
Topic: Mikrotik, 802.11N and nstream (Working)
Replies: 22
Views: 6421

Re: Odp: Mikrotik, 802.11N and nstream

I am
by ohara
Wed Oct 30, 2013 9:42 am
Forum: RouterOS v6 RC and v7 BETA
Topic: What happens to mikrotik with routeros?
Replies: 12
Views: 2452

Re: Odp: What happens to mikrotik with routeros?

There is one thing I can't understand. Lets talk about an 20$ stupid router. If you want to change LAN ip address, you just have to modify LAN address from 192.168.1.1 ti 192.168.2.1. But if you want to do this in mikrotik, you have to : 1.IP-address-interface-192.168.2.1 2.IP-dhcp server-dhcp conf...
by ohara
Sun Oct 13, 2013 7:34 pm
Forum: General
Topic: Some nice examples for make your own PHP Scripts with API
Replies: 6
Views: 7690

Re: Some nice examples for make your own PHP Scripts with AP

Perfect, thanks! I couldn't get it working with Denis' API. Now it works.
by ohara
Sun Oct 13, 2013 7:25 pm
Forum: General
Topic: Some nice examples for make your own PHP Scripts with API
Replies: 6
Views: 7690

Re: Some nice examples for make your own PHP Scripts with AP

- In the latest version, there's even file transfer and script execution with variables that can be supplied ala SQL prepared statements (except better). Could you please give me some advice how to run a script? I tried the following, but I am using it wrong? <?php namespace PEAR2\Net\RouterOS; req...
by ohara
Sat Oct 12, 2013 10:59 am
Forum: General
Topic: v6.4 released
Replies: 170
Views: 60475

Re: Odp: v6.4 released

Steen,

It is recommended to have the same ros version on Ap and client.

I have seen similar lockups, eg: http://forum.mikrotik.com/viewtopic.php?t=69064
by ohara
Sat Oct 12, 2013 10:47 am
Forum: General
Topic: RouterBoard 951-2n with USB Port
Replies: 3
Views: 1597

Re: Odp: RouterBoard 951-2n with USB Port

Did you do anything else to the routerboard, or did you simply solder the port? Have you used it with a pendrive or usb modem?
by ohara
Sat Oct 05, 2013 1:23 am
Forum: The Dude
Topic: I can install dude on 951?
Replies: 17
Views: 7866

Re: I can install dude on 951?

Ok, I'll call it a beatiful day once the RB will be replaced. By the way which ROS version did you use on your 951?
by ohara
Sat Oct 05, 2013 1:09 am
Forum: The Dude
Topic: I can install dude on 951?
Replies: 17
Views: 7866

Re: I can install dude on 951?

Hi, you're probably need to send it back to the distributor. The routerboad and Dude work fine as long as you don't reboot it. After reboot it goes into a infinite restart loop. Unfortunately I have experienced the same with a 951G last week and 6.15rc. I have flagged this post as a bug report to MT...
by ohara
Wed Oct 02, 2013 2:03 am
Forum: RouterBOARD hardware
Topic: Routerboard with 3G and GPS
Replies: 17
Views: 4332

Re: Odp: Routerboard with 3G and GPS

I don't own a RB912, but from my experience with RB411UAHR you can't surf the web and use gps at the same time. It's either or... unless there are two 3G modems attached to the RB.
by ohara
Sat Sep 28, 2013 10:51 pm
Forum: General
Topic: Conditional forwarder with 443 port,
Replies: 3
Views: 1454

Re: Odp: Conditional forwarder with 443 port,

What if you change the SSTP port to a different one?
by ohara
Sat Sep 28, 2013 10:08 pm
Forum: RouterBOARD hardware
Topic: RB951Ui-2HnD with external antennas
Replies: 18
Views: 30348

Re: Odp: RB951Ui-2HnD with external antennas

Nice
  • 1
  • 2
  • 3
  • 4
  • 5
  • 8