Community discussions

MikroTik App

Search found 22 matches

by Muator
Fri Feb 01, 2019 9:50 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 45451

Re: v6.43.8 [stable] is released!

I launch the terminal, I create the rule. In the parameters an intentional error, the rule applies. I look through the winbox, I see a new error parameter pe routing. This is normal ? [tik01] > ip firewall mangle add action=change-ttl chain=p postrouting prerouting [tik01] > ip firewall mangle add a...
by Muator
Wed Jan 30, 2019 10:34 pm
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

support mikrotik answered: x86 machine drivers not always support L2MTU option in RouterOS. To overcome your experienced issue, you should set 1504 byte MTU on ethernet interface, then create bonding with no MTU changes and create VLAN interface on bonding with 1500 byte MTU. The question turns out ...
by Muator
Wed Jan 30, 2019 3:46 pm
Forum: General
Topic: hap lite, not enough disk space.
Replies: 9
Views: 9639

Re: hap lite, not enough disk space.

Thanks for the answer. Configuration reset. I reset the configuration many times. I tried to enable, disable, system packages, no changes occur after a reboot. They are unchanged as shown in the post above. This firmware is from the factory. As soon as it was purchased, an attempt to update the firm...
by Muator
Wed Jan 30, 2019 1:01 pm
Forum: General
Topic: hap lite, not enough disk space.
Replies: 9
Views: 9639

hap lite, not enough disk space.

Greetings. I can not update the firmware on hAP lite. Through net-install the same error. reset system does not help. fix_space.npk does not help. sys resource pr uptime: 13m2s version: 6.40.4 (stable) build-time: Oct/02/2017 08:38:30 factory-software: 6.40 free-memory: 4808.0KiB total-memory: 32.0M...
by Muator
Thu Jan 24, 2019 10:04 pm
Forum: General
Topic: CHR 6.43.4 - BUG Bonding 802.3ad + vlan
Replies: 2
Views: 728

Re: CHR 6.43.4 - BUG Bonding 802.3ad + vlan

HI, i`m trying to configure an bonding with a vlan. /interface bonding add mode=802.3ad name=bonding1 slaves=ether4,ether1 transmit-hash-policy=layer-2-and-3 when I create a vlan10 on bonding1 just appears the message " Couldn't add new interface - could not set mtg (6)" see the attachment somebody...
by Muator
Thu Jan 24, 2019 9:57 pm
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

Perhaps the reason is as follows: Mikrotik can not recognize the l2mtu network card. The same situation with the 10G cards Intel 82599EB, l2mtu set parameter 0. ____________________________________________ Возможно причина в следующем: Mikrotik не может узнать l2mtu сетевой карты. Такая же ситуация ...
by Muator
Thu Jan 24, 2019 7:05 pm
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

Проверил какое l2mtu будет на "железном" микротике 6.42.9. ______________________________________________________ Checked what l2mtu will be on the "iron" mikrotik 6.42.9. /interface bonding add link-monitoring=none mode=802.3ad name=bonding1 slaves=ether3,ether2 /interface vlan add interface=bondin...
by Muator
Thu Jan 24, 2019 6:57 pm
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

Повышая версию прошивки, 6.35,6.36,6.37. Выяснилось, что на 6.36 уже есть проблема с l2mtu, автоматически оно устанавливается в значение 1496, если выключить-включить vlan. Флаг интерфейса vlan, при этом значении mtu пустой. При этом vlan создаются на интерфейсе bonding, успешно. На 6.37 vlan создае...
by Muator
Thu Jan 24, 2019 2:47 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 45451

Re: v6.43.8 [stable] is released!

Nope, problems must be reported to support@mikrotik.com.
This is done, waiting for an answer.
by Muator
Thu Jan 24, 2019 1:07 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 45451

Re: v6.43.8 [stable] is released!

Mutator , in a previous post you wrote yourself that the problem is also reproducible on an earlier versions of RouterOS (6.42.x), so it is NOT a 6.43.8 specific regression. The release topics are meant for version-specific issues only. In the currently supported stable and longterm versions, this ...
by Muator
Thu Jan 24, 2019 10:58 am
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

https://forum.mikrotik.com/viewtopic.php?f=2&hilit=bonding&p=700329&t=142109&sid=b471750aa9818c17f90f8ae7e141927b Аналогичная проблема. Все кто обратил внимание, на х86_64 и считают что проблема в этом, ошибаются. Изменял архитектуру на просто х86, проблема актуальна. _______________________________...
by Muator
Thu Jan 24, 2019 10:49 am
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

Re: 6.43.8 l2mtu bonding x86

Делал ресет систем, после этого создавал bonding, создаю влан, получаю ошибку - cold not set MTU (6). Прошиваю 6.34.2 вланы на bonding работают без проблем. Проверял на архитектуре х86 и x86_64. _______________________________________________________________________________________ I made a reset of...
by Muator
Thu Jan 24, 2019 10:40 am
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 45451

Re: v6.43.8 [stable] is released!

Подскажите пожалуйста, почему удален мой пост о проблеме MTU при создании влан на интерфейсе bonding ? Проверял на ROS архитекуры x86, проблема актуальна. ____________________________________________________ Please tell me why my post about the MTU problem was deleted when creating a vlan on the bon...
by Muator
Sun Jan 20, 2019 4:24 pm
Forum: General
Topic: 6.43.8 l2mtu bonding x86
Replies: 6
Views: 1348

6.43.8 l2mtu bonding x86

Сервер х86, ether1 - Realtek, ether2 - intel i350, ether2 - intel i350. Столкнулись со странной проблемой MTU, L2MTU 0. При создании вланов, использовалась сетевая ether1, позже добавили i350-t2, создали bonding1, изменили на всех вланах интерфейс с ether1 на bonding1. Удалить влан можно без проблем...
by Muator
Fri Nov 02, 2018 2:32 pm
Forum: General
Topic: Not enough disk space to perform update
Replies: 15
Views: 12692

Re: Not enough disk space to perform update

Did you find a solution to the problem? I have a similar problem. I can not upgrade to version 6.42.6 He says: ERROR: not enough disk space, 7.1MiB is required and only 6.7MiB is free How can I clean it? Have you tried this? https://www.mikrotik.com/download/share/fix_space.npk You can read more on...
by Muator
Wed Feb 28, 2018 12:54 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 19301

Re: v6.40.6 [bugfix] is released!

On version 6.40.6 is created ! Upgrade to 6.40.6 and check if you don't believe. Checked just now again, in the mangle and firewall, is created with 0. The output from the console showed above. The point is that the rules were added after the upgrade to 6.40.6. Don't get me wrong, but I downgraded ...
by Muator
Wed Feb 28, 2018 12:22 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 19301

Re: v6.40.6 [bugfix] is released!

From the winbox in the firewall creates a rule with the parameter "time" 0C for "limit". From the terminal is not created. I can't create it from WinBox as well. How do you do that? WinBox 3.12, RouterOS 6.41.1 limit0.jpg On version 6.40.6 is created ! Upgrade to 6.40.6 and check if you don't belie...
by Muator
Wed Feb 28, 2018 10:37 am
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 19301

Re: v6.40.6 [bugfix] is released!

Muator - I assume that you did upgrade device from version older than 6.38.4 and did not read all the changelogs in the middle. 6.38.4 introduces this fix - "firewall - do not allow to set "time" parameter to 0s for "limit" option". Also this problem is not related to 6.40.6 so please in the future...
by Muator
Mon Feb 26, 2018 11:38 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 19301

Re: v6.40.6 [bugfix] is released!

Всем привет ! Mikrotik mipsbe. Столкнулся с такой ситуацией, из терминала не выполняется команда добавления правила firewall c параметром limit=0;5. Из винбокса это правило добавляется, с параметром limit=0;5. Hello everyone ! Mikrotik mipsbe. Faced with this situation, the command to add a firewall...
by Muator
Thu Mar 17, 2016 2:10 pm
Forum: RouterBOARD hardware
Topic: RBmAPL-2nD - Question
Replies: 5
Views: 1037

Re: RBmAPL-2nD - Question

Nope it's real. There is a thread about it. It works ! Open case, take out card, link rises in any combination. Insert the card into the housing, there is no link. :shock: Simply remove one magnet, the side from the WPS button. Thank you very much for your help. ____________________________________...
by Muator
Thu Mar 17, 2016 1:05 pm
Forum: RouterBOARD hardware
Topic: RBmAPL-2nD - Question
Replies: 5
Views: 1037

Re: RBmAPL-2nD - Question

Don't use the magnet It solves the issue
This is a joke ?

________________________________________________________________________

Это шутка ?
by Muator
Thu Mar 17, 2016 8:03 am
Forum: RouterBOARD hardware
Topic: RBmAPL-2nD - Question
Replies: 5
Views: 1037

RBmAPL-2nD - Question

Sorry for my bad English. Please help me! software 6.30.4/6.34.3 When you switch, you restart all the connected devices (RBmAPL-2nd <-> other devices) equipment, RBmAPL-2-I can't negotiate port speed, set a 10 Mbit Full and the result can be pinged via ethernet and may not pinged. To distort the pat...