It seems the problem was master port.
I did reset both device. then reconfigure masterport and tag vlan.
everything is fine. it remains only to configure filters.

There are 2 ways of setting VLANs on CRS devices. One, by using bridges - you will be able to use STP but whole traffic will go via CPU. So you are limited to what CPU can achieve in terms of bandwidth. The other way is to use switch chip and enjoy wire speed but no STP. Here is instruction how to ...

Hi guys! I took for the test two Mikrotik CRS112-8G-4S-IN I can not correctly configure vlan between devices. I read the manual, but I cant understand where is my fail. I have prepared a scheme. please help me with the config. http://wolfskull.eu/crs_vlan.jpg VLAN 100 - management P.S. One more ques...

I also sent the file to support, they replied that it is necessary to wait for version 6.28 and check the problem with new version.

Thanks for advice

HUAWEI ME909u will work grate in newer RB models Like RB912. RB922, RB953 Thanks! Unfortunately models RB411, RB912, RB922, RB953 have only one ethernet port. I need 2 ethernet ports first port WAN_cat5 second port LAN (to switch) LTE modem - WAN_gms (backup) USB modem does not fit, because I want ...

There are plenty of posts on these forums about the ME909u mPCIe modem - have a search.
You'll need to put the SIM onto the RouterBoard.

I found a topic - http://forum.mikrotik.com/viewtopic.php ... ilit=me909

As I understand, it is best to use a Sierra MC7710

Hi I want to connect mikrotik to 3G/LTE network. How to do this using the usb stick as I know. Can anyone had experience with mini-PCIe module? For example - routerboard RB411U + HUAWEI LTE module Will there be problems with the drivers? Maybe have already tested LTE modules. Can I use the SIM slot ...

I compared contents of the software and was disappointed. What is there to be disappointed. It is a small device with little RAM. Do you miss NTP server on a home router? Than you can always chose RB951Ui-2HnD Yes, I agree that for 21eur - this is a great device. I needed a multicast package, which...

I compared contents of the software and was disappointed.

After upgrading to version 6.27, router reboots itself with an error: 17:39:54 system,error,critical System rebooted because of kernel failure 17:39:54 system,error,critical router was rebooted without proper shutdown /system resource pr uptime: 1h31s version: 6.27 build-time: Feb/11/2015 13:24:13 f...

I was upgrade my RB333 to version 6.0rc4 and I see only one interface (ether1) instead of three. Where is the interface 2 and 3? /system> resource pr version: 6.0rc4 architecture-name: powerpc board-name: RB333 platform: MikroTik /int pr Flags: D - dynamic, X - disabled, R - running, S - slave # NA...

I was upgrade my RB333 to version 6.0rc4 and I see only one interface (ether1) instead of three. Where is the interface 2 and 3? /system> resource pr version: 6.0rc4 architecture-name: powerpc board-name: RB333 platform: MikroTik /int pr Flags: D - dynamic, X - disabled, R - running, S - slave # NAM...