It seems that this function is no longer supported in v6 and CCR: /tool graphing set page-refresh=500 what do you mean? [admin@TestPlace] /tool graphing> set page-refresh=500 [admin@TestPlace] /tool graphing> print store-every: hour page-refresh: 500 [admin@TestPlace] /tool graphing> Hi, may be tha...

It seems that this function is no longer supported in v6 and CCR:

Hello Normis, could you be so kind and check my ticket 2013060266000151 ? It seems that I'm not alone with the stability problem of the new CCR and also problems regarding IPSec tunnels. I'm sending supout file with detailed description almost every day however your support has stopped answering two...

Hi, I have a problem with the stability of IPSec LAN-to-LAN tunnel on the CCR1036 6.14rc - it seems that have this problem 6.0 - same as 6.14rc 6.1rc - doesn't even make a connection My case fits best to http://forum.mikrotik.com/viewtopic.php?f=2&t=56944 I can provide access to my router if som...

I have the same problem. I would like to know if anyone has something new in this case. Recently I moved two different IPSec lan2lan tunnels from Cisco ASA 5505 to brand new CCR. I don't know what exactly sits at the ends however I have this problem with the one tunnel which is configured with 3DES ...

L2TP VPN causes reboot. The CCR1036 acts here as a L2TP server and Win7 machine as a client. My configuration is based on this article: http://wiki.mikrotik.com/wiki/MikroTik_RouterOS_and_Windows_XP_IPSec/L2TP The only message in the log after router reboot is "router was rebooted without prope...

This is how my config looks like now: name="VM" cpu-count=2 memory=512MiB disk-images=hda:ubuntu.img kernel="vmlinuz-2.6.32-33-generic-pae" kernel-cmdline="console=ttySO" initrd="initrd.img-2.6.32-33-generic-pae" vnc-server-address=0.0.0.0 vnc-server-display=1...

Could you be so kind and provide me some additional instruction how to extract these parameters? Anyway, how can be a cdrom install image related to the boot process of the VM and what exactly is behind the scene that the VM without it doesn't work completely? I presume that kernels are different to...

I thank you janisk. It might be also related to link establishment delay between router NIC and switch. I'm using WS-C2960S-24TS-L switch here and I'm sure that it has auto-negotiation configured on all ports. It might be worth to try set up link speed and duplex manualy on these ports and on both d...

Is there any known solution how to safely unmount cdrom iso from KVM config of an Ubuntu server edition? I have exactly same problem as yozhiks. Just after I remove cdrom:ubuntu-10.04.3-server-i386.iso my Ubuntu VM is unable to start anymore. There are only couple of messages in the log "kvm er...

The IP address is static

It's one interface of QuadGigabit Ethernet PCI-Express card from Supermicro (S9AOCSGI4). It has an Intel 82571EB chipset.

Yes, this IP address belongs to ether2 however I did exactly what you suggested.
I changed vnc-server-address to 0.0.0.0 and now the VM starts after reboot automatically.

Thank you for your support!

[admin@XXXX] > kvm print Flags: X - disabled 0 name="VM" cpu-count=2 memory=512MiB disk-images=hda:ubuntu.img,cdrom:ubuntu-10.04.3-server-i386.iso kernel="" kernel-cmdline="console=ttySO" initrd="" vnc-server-address=192.168.80.1 vnc-server-display=1 snapshot=...

After router reboot with the latest RouterOS (v5.19) my VM has only "vnc cant bind" in the status and it is necessary to start it manually

The router is currently running v5.9 on x86.
Guest OS is Ubuntu 10.04.4 LTS

Hello, is there any "autostart" parameter for VMs virtualized on KVM inside RouterOS?
After router reboot all VMs are waiting for manual start.

Solution alredy exist on stadard linux KVM "virsh autostart vmName"
Thank you in advance