Community discussions

MUM Europe 2020

Search found 10 matches

by monolithelectronics
Wed Mar 07, 2012 8:16 am
Forum: General
Topic: firewall problem
Replies: 1
Views: 391

firewall problem

Hi Guys, Got now routerboards 411U firmware 2.39 OS 5.14 the problem I have is that when I scan ports on ppp then 1720 and 1863 tcp are showing open. Made rules to drop it but whatever I do it is still open. What can do to get it closed? Rules: input on tcp/udp dest-port 1720,1863 drop router is not...
by monolithelectronics
Sun Jul 31, 2011 1:20 pm
Forum: RouterBOARD hardware
Topic: MC8705 and 411U setup isses
Replies: 7
Views: 3558

Re: MC8705 and 411U setup isses

There is a bug in the OS, on 5.5.

1. System does not remember init string after few reboot, it is losing it.
2. Constant dialling out is related to modem or RB itself, the system needs to be shutdown and powered down after change of simcard. Hot swap makes modem confused.
by monolithelectronics
Sat Jul 30, 2011 5:57 am
Forum: RouterBOARD hardware
Topic: MC8705 and 411U setup isses
Replies: 7
Views: 3558

Re: MC8705 and 411U setup isses

add this to Modem init: ATE0V1&D2&C1S0=0+IFC=2,2; and all rocks... admin@MikroTik] /interface ppp-client> info ppp-out status: ready pin-status: no password required functionality: full gprs-class: A - GPRS & GSM simultaneous manufacturer: Sierra Wireless, Incorporated model: MC8705 revision: T0_2_5...
by monolithelectronics
Sat Jul 30, 2011 5:31 am
Forum: RouterBOARD hardware
Topic: MC8705 and 411U setup isses
Replies: 7
Views: 3558

Re: MC8705 and 411U setup isses

[admin@MikroTik] /interface ppp-client> info 0 status: ready pin-status: ERROR functionality: full gprs-class: ERROR manufacturer: Sierra Wireless, Incorporated model: MC8705 revision: T0_2_5_2AP R263 CNSZXL00000968 2010/11/12 15:23:46 serial-number: 353567040044514 current-operator: Limited Service...
by monolithelectronics
Sat Jul 30, 2011 2:57 am
Forum: Beginner Basics
Topic: PPP APN exetel with MC8705 in RB411
Replies: 2
Views: 810

Re: PPP APN exetel with MC8705 in RB411

set up your nat
by monolithelectronics
Sat Jul 30, 2011 2:43 am
Forum: RouterBOARD hardware
Topic: MC8705 and 411U setup isses
Replies: 7
Views: 3558

MC8705 and 411U setup isses

Hi Guys, My board died during upgrade, I had to do clean install with netinstall 5.5. Since then my modem does not work. Drivers shows up sierra wireless, ppp info does recognise modem (3,3) but shows PIN ERROR and LIMITED SERVICE, when I turn ppp on I get this: waiting for packets then: modem init ...
by monolithelectronics
Sun Jul 17, 2011 3:25 am
Forum: RouterBOARD hardware
Topic: 411U eth forces connection to remote host
Replies: 2
Views: 662

Re: 411U eth forces connection to remote host

Hi, thnx That is just what I did but the problem is that in current firmware I need to innitiate connection to RB from remote host. What I need is that RB will innitiate connection to remote server on particular port. I need this: http://www.lantronix.com/pdf/XPort_UG.pdf ...page 32 down, section RE...
by monolithelectronics
Sat Jul 16, 2011 7:40 am
Forum: RouterBOARD hardware
Topic: 411U eth forces connection to remote host
Replies: 2
Views: 662

411U eth forces connection to remote host

Hi Guys, Any one knows if it is possible to force RB to connect to remote host on some port? I want to plug to RS232 my board and redirect all traffic from it to remote server, so when there is activity on RS port then RB will connect to some IP on some port and then send redirected data from RS to ...
by monolithelectronics
Mon Jul 11, 2011 2:21 pm
Forum: RouterBOARD hardware
Topic: 411-5nH and MC8705 connection issue
Replies: 1
Views: 601

Re: 411-5nH and MC8705 connection issue

for every one who has the issue: TCP/IP Related Questions I have two NIC cards in the MikroTik router and they are working properly. I can ping both networks from the router but can't ping from one network through the router to the other network and to the Internet. I have no firewall setup. This is...
by monolithelectronics
Mon Jul 11, 2011 1:42 pm
Forum: RouterBOARD hardware
Topic: 411-5nH and MC8705 connection issue
Replies: 1
Views: 601

411-5nH and MC8705 connection issue

Hi Guys, I have just got above model, I have done initial settings, I can ping from WinBox and do tracert but my lovely laptop connected to ETH is not talking at all. I get proper IP and gateway but there is no go. I have set up static working DNS server, but it looks like I have no routing from ETH...