Hi Guys, Got now routerboards 411U firmware 2.39 OS 5.14 the problem I have is that when I scan ports on ppp then 1720 and 1863 tcp are showing open. Made rules to drop it but whatever I do it is still open. What can do to get it closed? Rules: input on tcp/udp dest-port 1720,1863 drop router is not...

There is a bug in the OS, on 5.5.

1. System does not remember init string after few reboot, it is losing it.
2. Constant dialling out is related to modem or RB itself, the system needs to be shutdown and powered down after change of simcard. Hot swap makes modem confused.

add this to Modem init: ATE0V1&D2&C1S0=0+IFC=2,2; and all rocks... admin@MikroTik] /interface ppp-client> info ppp-out status: ready pin-status: no password required functionality: full gprs-class: A - GPRS & GSM simultaneous manufacturer: Sierra Wireless, Incorporated model: MC8705 revi...

[admin@MikroTik] /interface ppp-client> info 0 status: ready pin-status: ERROR functionality: full gprs-class: ERROR manufacturer: Sierra Wireless, Incorporated model: MC8705 revision: T0_2_5_2AP R263 CNSZXL00000968 2010/11/12 15:23:46 serial-number: 353567040044514 current-operator: Limited Service...

set up your nat

Hi Guys, My board died during upgrade, I had to do clean install with netinstall 5.5. Since then my modem does not work. Drivers shows up sierra wireless, ppp info does recognise modem (3,3) but shows PIN ERROR and LIMITED SERVICE, when I turn ppp on I get this: waiting for packets then: modem init ...

Hi, thnx That is just what I did but the problem is that in current firmware I need to innitiate connection to RB from remote host. What I need is that RB will innitiate connection to remote server on particular port. I need this: http://www.lantronix.com/pdf/XPort_UG.pdf ...page 32 down, section RE...

Hi Guys, Any one knows if it is possible to force RB to connect to remote host on some port? I want to plug to RS232 my board and redirect all traffic from it to remote server, so when there is activity on RS port then RB will connect to some IP on some port and then send redirected data from RS to ...

for every one who has the issue: TCP/IP Related Questions I have two NIC cards in the MikroTik router and they are working properly. I can ping both networks from the router but can't ping from one network through the router to the other network and to the Internet. I have no firewall setup. This is...

Hi Guys, I have just got above model, I have done initial settings, I can ping from WinBox and do tracert but my lovely laptop connected to ETH is not talking at all. I get proper IP and gateway but there is no go. I have set up static working DNS server, but it looks like I have no routing from ETH...