Community discussions

MUM Europe 2020

Search found 30 matches

by SirThor
Fri Oct 25, 2013 9:34 pm
Forum: General
Topic: tx discrepancy
Replies: 1
Views: 414

Re: tx discrepancy

no help, no thoughts, or no comments on this.
by SirThor
Thu Oct 24, 2013 3:57 pm
Forum: General
Topic: tx discrepancy
Replies: 1
Views: 414

tx discrepancy

https://www.dropbox.com/s/cijdvnp3prsh49w/upload.tiff this is a picture of a router at tower base. e1 is the feed, e2 is a fail over. the others are the sectors and PtP links to other towers. i've been unable to determine the large amount on upload happening. it has always been th tx on e1 equals t...
by SirThor
Wed Aug 07, 2013 10:37 pm
Forum: General
Topic: failover
Replies: 4
Views: 819

Re: failover

do i need to copy the entire main routing table for each set?
by SirThor
Sun Aug 04, 2013 1:14 am
Forum: General
Topic: failover
Replies: 4
Views: 819

Re: failover

a little more info i have in my routing table this 2 default routes ISP1 0.0.0.0->66.xx.xx.xx distance=1 ISP2 0.0.0.0->172.xx.xx.xx distance=2 of course all traffic goes through ISP1. in this config i ping 208.67.222.222 specifying which interface. to make sure i also did a trace route and it would ...
by SirThor
Sat Aug 03, 2013 8:32 am
Forum: General
Topic: failover
Replies: 4
Views: 819

failover

I'm using this http://wiki.mikrotik.com/wiki/Failover_Scripting. it does great at increasing the distance if ISP1 fails. though once it is restored it does not decrease the distance. the problem is that once the distance ISP1 is increased to 3 it will not ping anything on the internet. ISP2 has no p...
by SirThor
Wed Jul 31, 2013 1:37 am
Forum: General
Topic: ping
Replies: 6
Views: 1161

Re: ping

I'm using the one located at http://wiki.mikrotik.com/wiki/Failover_Scripting and it seems to be working. for a beginners some extra information would be helpful. 1) does it need to be put in a scheduler? 2) and the policies that need to be checked off.
by SirThor
Tue Jul 30, 2013 5:15 am
Forum: Beginner Basics
Topic: Policies
Replies: 2
Views: 545

Re: Policies

thank you. look all over for a week for that.
by SirThor
Tue Jul 30, 2013 1:08 am
Forum: Beginner Basics
Topic: Policies
Replies: 2
Views: 545

Policies

a quick questions

on the script editor, there is the list of policy. is there a page for definitions for the different ones and the results?
by SirThor
Fri Jul 26, 2013 7:09 pm
Forum: General
Topic: ping
Replies: 6
Views: 1161

Re: ping

i hoping to create a failover. is there any examples of what do to on down and up.

there doesn't appear to be a way to specify the interface under netwatch. that would seem necessary for failover.
by SirThor
Fri Jul 26, 2013 11:07 am
Forum: General
Topic: ping
Replies: 6
Views: 1161

Re: ping

if the router is connected to a modem that has the gateway ip address, it checks that connection. if the modem has lost internet, that is not tested and the router had no way of knowing that.
by SirThor
Fri Jul 26, 2013 10:24 am
Forum: Wireless Networking
Topic: Need some failover help
Replies: 3
Views: 905

Re: Need some failover help

i believe the problem here is that the 2nd route needs to be already set up with a distance of 2.

on another note. does this need to be set up on a scheduler so it keeps checking or is that built in to the script already?
by SirThor
Fri Jul 26, 2013 10:15 am
Forum: General
Topic: ping
Replies: 6
Views: 1161

ping

When you have a route set to check ping, what does it ping?
by SirThor
Sun Dec 02, 2012 3:04 am
Forum: General
Topic: iOS6
Replies: 7
Views: 1422

Re: iOS6

Really. No one else is having this problem!? :shock:
by SirThor
Fri Nov 23, 2012 11:05 am
Forum: General
Topic: iOS6
Replies: 7
Views: 1422

Re: iOS6

update3: i find that if i delete cookies I'm able to access the router. this needs to be done daily though. I'm sure there is a better fix.
by SirThor
Thu Nov 22, 2012 2:01 pm
Forum: General
Topic: iOS6
Replies: 7
Views: 1422

Re: iOS6

update 2: that only worked for a little while.
by SirThor
Thu Nov 22, 2012 1:44 pm
Forum: General
Topic: iOS6
Replies: 7
Views: 1422

Re: iOS6

update: i find that if i change the service port www to something other than 80 i can gain access.
by SirThor
Sun Nov 18, 2012 12:44 am
Forum: General
Topic: Internal server error using webfig with ipad ios6
Replies: 15
Views: 10365

Re: Internal server error using webfig with ipad ios6

I'm having same problem. does anyone have a fix?
by SirThor
Fri Nov 16, 2012 3:00 pm
Forum: General
Topic: NTP
Replies: 2
Views: 548

Re: NTP

thanks for the response. it showed up after a couple of hours and more importantly a refresh.

perhaps you can help me with something else. i cannot log into any of my routers from an iOS6.1 system(iPhone or ipad). wibfig returns an "internal server error" message when password is entered.
by SirThor
Fri Nov 16, 2012 11:30 am
Forum: General
Topic: NTP
Replies: 2
Views: 548

NTP

After upgrading to 5.21 lost NTP server and can't get it back, even after downloading ntp-5.21-mipsbe.npk.
by SirThor
Tue Nov 06, 2012 11:04 am
Forum: General
Topic: iOS6
Replies: 7
Views: 1422

iOS6

I'm unable to login to my routers through webfig from either inside the network or from the web via static IP. I'm using iPhone4s or iPad iOS6. Did not have a problem prior to upgrade.

I have a 493AH v.5.20
by SirThor
Mon Oct 22, 2012 10:44 pm
Forum: Wireless Networking
Topic: Problem with mikrotik and IOS6
Replies: 46
Views: 39662

Re: Problem with mikrotik and IOS6

That's what I thought. I perhaps have a different problem.

I'm unable to login to my routers through webfig from either inside the network or from the web via static IP. I'm using iPhone4s or iPad iOS6. Did not have a problem prior to upgrade.
by SirThor
Mon Oct 22, 2012 4:01 pm
Forum: Wireless Networking
Topic: Problem with mikrotik and IOS6
Replies: 46
Views: 39662

Re: Problem with mikrotik and IOS6

Are these settings in the phone or the router and where?
by SirThor
Thu Sep 06, 2012 6:26 pm
Forum: General
Topic: Sorenson VRS
Replies: 0
Views: 412

Sorenson VRS

has any one had any experience working with a Sorenson VRS. it is used by deaf individuals for video conferencing and using ASL. after some time i found the way to get the forwarding to go through my core router and then through the Ubiquity CPE. i've added an edge router between there location and ...
by SirThor
Thu Nov 17, 2011 2:25 pm
Forum: General
Topic: subnetting
Replies: 2
Views: 629

Re: subnetting

thank you. i'm new to this and wanted to make sure i was understanding some of the basic principles.
by SirThor
Thu Nov 17, 2011 3:37 am
Forum: General
Topic: subnetting
Replies: 2
Views: 629

subnetting

i read the article at http://wiki.mikrotik.com/wiki/Testwiki/IP_addressing_and_subnetting_principles and i'm mildly confused. about 2/3 down the page an example is given of 173.120.0.0/18. this resulting in 4 subnets with a possible 62 host. addresses at 173.20.0.0, 173.20.0.64, 173.20.128, and 173....
by SirThor
Sun Oct 09, 2011 5:02 am
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1106

Re: remote access

thank you. it is in the default configuration. i added /tools macserver all and disabled the 4th(numbers 3) /ip firewall filter rules. my 493ah doesn't come with those defaults and never experienced the problem. thanx again for helping a rookie.
by SirThor
Wed Oct 05, 2011 1:24 am
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1106

Re: remote access

check if you do not have firewall in place that drops connections frm outside world to your router, as that is part of default configuration. Also, check /ip services weather you have set up some address/network from where services can be accessed. default configuration? is that referring to the mi...
by SirThor
Tue Oct 04, 2011 6:57 pm
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1106

Re: remote access

check if you do not have firewall in place that drops connections frm outside world to your router, as that is part of default configuration. Also, check /ip services weather you have set up some address/network from where services can be accessed. the default configuration you mention, is that on ...
by SirThor
Mon Oct 03, 2011 3:13 pm
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1106

Re: remote access

yes i can ping the IP
by SirThor
Mon Oct 03, 2011 2:01 am
Forum: Beginner Basics
Topic: remote access
Replies: 9
Views: 1106

remote access

not able to remotely access a 750 router from the net using the static address provided by ISP. is there a setting in there I'm missing. the message i get is "because the server were this page is located isn't responding". i have no problem inside the network accessing the router using the static IP.