Community discussions

Search found 300 matches

by cicserver
Fri Jun 07, 2019 6:52 pm
Forum: Beginner Basics
Topic: Simple Queues vs Queue Tree
Replies: 3
Views: 770

Re: Simple Queues vs Queue Tree

this was my question.
is dynamic simple queues for each user is better?
or should I mark traffic for different package users,& control them using PCQ base simple queues
by cicserver
Sun May 12, 2019 9:47 am
Forum: Beginner Basics
Topic: Simple Queues vs Queue Tree
Replies: 3
Views: 770

Simple Queues vs Queue Tree

Pardon me if this have been already replied in the forum. I have CCR router configured as pppoe server with 2000 active pppoe clients connected with it. I used Mangle to mark there download/upload. What is more efficient approach for controlling each under bandwidth ? Dynamic Simple Queue for each u...
by cicserver
Wed Apr 10, 2019 7:36 pm
Forum: General
Topic: efficiently marking of packets
Replies: 0
Views: 233

efficiently marking of packets

Scenario: I am running pppoe server with about 2000 active pppoe subscriber. All users gets public IP & there is no NAT rule in place. Connection Tracking is set to AUTO, and in ip/firewall/Raw , I added rules for NO track for src/dst of my public ip users to avoid CPU hiking on ppp sessions disconn...
by cicserver
Fri Oct 26, 2018 10:17 am
Forum: Forwarding Protocols
Topic: BGP & policy base routing not working
Replies: 0
Views: 732

BGP & policy base routing not working

I have acquired 2 ISP's connection, and configured BGP in it, its working, But when I enabled 2nd ISP, all traffic shifts to 2nd ISP link, My task is to perform policy base routing so that I can mark one pool to go via 2nd ISP. My BGP config /routing bgp instance add as=XXXXX client-to-client-reflec...
by cicserver
Fri Mar 23, 2018 9:43 pm
Forum: General
Topic: Redirect PPPOE traffic inside BRIDGE port
Replies: 0
Views: 281

Redirect PPPOE traffic inside BRIDGE port

I am using 2 ports bridge inside mikrotik. port 1 > ISP , port 2 > LAN Users without any dhcp ip all lan users dial pppoe to isp to get internet Dueto some frequent problems at ISP for some specific dns records, Can I redirect pppoe users DNS traffic inside BRIDGE to some external dns like 8.8.8.8 ?...
by cicserver
Fri Mar 09, 2018 12:34 pm
Forum: General
Topic: informing user about his quota usage with registration date via mikrotik
Replies: 0
Views: 283

informing user about his quota usage with registration date via mikrotik

I am using Mikrotik as PPPoE Server , along with Freeradius as a Billing system. After expiry user gets ip from EXPIRED pool which redirects him to an EXPIRED page (hosted locally on radius). This part is working fine. At some ISP I seen that the expired page also greets that particular user by firs...
by cicserver
Fri Mar 09, 2018 8:29 am
Forum: Beginner Basics
Topic: Add Static Queue AFTER dynamic Queues
Replies: 5
Views: 619

Re: Add Static Queue AFTER dynamic Queues

thank you all for your valuable replies. Appreciated.
by cicserver
Tue Mar 06, 2018 7:03 am
Forum: Beginner Basics
Topic: Add Static Queue AFTER dynamic Queues
Replies: 5
Views: 619

Re: Add Static Queue AFTER dynamic Queues

Without looking at it, conceptually you could create a static placeholder queue which does nothing at 0. Then your static everything else queue. Dynamic rules would be added after 0. I want to have this static queue at end all the time so that dynamic queues must remain on above this queue. ok I gu...
by cicserver
Mon Mar 05, 2018 6:56 pm
Forum: Beginner Basics
Topic: Add Static Queue AFTER dynamic Queues
Replies: 5
Views: 619

Add Static Queue AFTER dynamic Queues

In mikrotik I have pppoe server , & multiple dynamic queues for each user created , which is generated via freeradius according to user profile. I want to insert a STATIC queue that should remain @ the LAST number. Example: any user that connects, and if it don't have any profile/queue, then he shou...
by cicserver
Sat Mar 03, 2018 4:58 pm
Forum: Beginner Basics
Topic: Marking Connections for Packet/Routing
Replies: 1
Views: 318

Marking Connections for Packet/Routing

I have some confusion. What is difference between `mark connection` vs `mark packet` vs `mark routing`? For example. I want to mark a `src-ip` for bandwidth shaping so i should first mark connection from this ip then mark packets for these marked connections, then used them in queue ? For Routing, I...
by cicserver
Fri Feb 16, 2018 5:59 am
Forum: Beginner Basics
Topic: Mikrotik Per minute basis Burst Queue
Replies: 7
Views: 840

Re: Mikrotik Per minute basis Burst Queue

so what should be the correct way to achieve this ? if user is downlaod big file lets say 1 GB via internet download manager, then at first minute he gets 512kb, then after a mnt, he gets back to actuall bandwidht that is 256kb, then after one minute he should gets back to 512kb and so on.
by cicserver
Thu Feb 15, 2018 10:09 am
Forum: Beginner Basics
Topic: Mikrotik Per minute basis Burst Queue
Replies: 7
Views: 840

Re: Mikrotik Per minute basis Burst Queue

i would love to use simple queue but problem is that if the user starts downloading big file, he starts with burst value, but after burst time (1 minute) , It gets back to max-limit and remains there until unless user stops download and remains idle forburst-time. i guess this is by design. my queue...
by cicserver
Thu Feb 15, 2018 9:58 am
Forum: Beginner Basics
Topic: Mikrotik Per minute basis Burst Queue
Replies: 7
Views: 840

Re: Mikrotik Per minute basis Burst Queue

but my queues are dynamic provided by Freeradius billing system. workaround?
by cicserver
Thu Feb 15, 2018 8:39 am
Forum: Beginner Basics
Topic: Mikrotik Per minute basis Burst Queue
Replies: 7
Views: 840

Mikrotik Per minute basis Burst Queue

Task: User Package: 1mb Burst Allowed : 2mb Burst allowed duration timings : 1 mnt Now what I want is that if user is downloading , he should get 1mb for 1 minute, then 2mb for second minute, then again on 3rd minute he reverts to 1mb, then again on 4th minute he gets 2mb. like per minute burst then...
by cicserver
Tue Feb 06, 2018 1:19 pm
Forum: Scripting
Topic: Script for public ip detection
Replies: 31
Views: 5906

Re: Script for public ip detection

I used this one with some modification & it worked well :) ,
by cicserver
Wed Jan 31, 2018 6:32 am
Forum: Scripting
Topic: if statement... how? [SOLVED]
Replies: 9
Views: 842

Re: if statement... how? [SOLVED]

:if (($VAR1 = "YES") && ($VAR2 = "NO")) do={
by cicserver
Tue Jan 30, 2018 1:15 pm
Forum: General
Topic: Blocking UDP attack in Mikrotik not working
Replies: 14
Views: 1948

Re: Blocking UDP attack in Mikrotik not working

what rules I can make to DROP or REJECT the flooding (so that it may not pass to other) ?
is DROP better or REJECT?
by cicserver
Tue Jan 30, 2018 1:06 pm
Forum: General
Topic: Blocking UDP attack in Mikrotik not working
Replies: 14
Views: 1948

Re: Blocking UDP attack in Mikrotik not working

Are you on dynamic ip? if so try resetting your modem to get a new ip.
And as mentioned, make sure you don't provoke it again in future.
I am static public IP, it is required for some services. Getting public ip is very difficult here, after many months of requests I am now able to get public ip.
by cicserver
Tue Jan 30, 2018 1:04 pm
Forum: General
Topic: Blocking UDP attack in Mikrotik not working
Replies: 14
Views: 1948

Re: Blocking UDP attack in Mikrotik not working

You cannot stop incoming traffic. Only ISP could do this. Your Mikrotik could however filter it out and do not pass to LAN.
How ISP's block such traffic , using what technique?
by cicserver
Tue Jan 30, 2018 1:02 pm
Forum: General
Topic: Blocking UDP attack in Mikrotik not working
Replies: 14
Views: 1948

Re: Blocking UDP attack in Mikrotik not working

Right now I donot have any FIREWALL in place. In TORCH i can see on IP address with UDP traffic , traffic reaching upto 80-100 mbps which chocks the whole bandwidth. Even if block this ip in INPUT/FORWARD chain , still the traffic is reaching upto 80-100mbps. Some one told me about UNICORN UDP flood...
by cicserver
Fri Jan 26, 2018 7:31 am
Forum: General
Topic: Blocking UDP attack in Mikrotik not working
Replies: 14
Views: 1948

Blocking UDP attack in Mikrotik not working

I have single PUBLIC ip on WAN interface of Mikrotik. From yesterday I am continuously being hit by various public ip with UDP attack. this results in WAN link usage to 100% and chocking. the src and dst ports (udp) are different. I tried to block ports, i tried to block source ip's in INPUT/FORWARD...
by cicserver
Thu Jan 11, 2018 6:12 am
Forum: General
Topic: High CPU load when PPPoE sessions disconnects
Replies: 52
Views: 9345

Re: High CPU load when PPPoE sessions disconnects

Following is my current scenario. only 1 CCR which is configured as PPPoE Server. it have public ip interface and few dsl links too. So all is running in one box. I am using mark routing to distinguish users , like if user have private ip he will nat via dsl, and if he has public ip, he will go via ...
by cicserver
Tue Nov 07, 2017 6:02 am
Forum: General
Topic: Freeradius Sim-Use not working with Mikrotik Hotspot
Replies: 5
Views: 999

Re: Freeradius Sim-Use not working with Mikrotik Hotspot

the guide saying more about radutmp/checkrad. In my opinion checking the NAS will be slow in heavy production Mikrotik NAS.
All should be done at Radius level.I m using SQL.
by cicserver
Mon Nov 06, 2017 7:02 pm
Forum: General
Topic: Freeradius Sim-Use not working with Mikrotik Hotspot
Replies: 5
Views: 999

Freeradius Sim-Use not working with Mikrotik Hotspot

Scenario: I have Mikrotik 6.39 / 6.40 Hotspot Server. Freeradius 2.2.0 on Ubuntu is installed. Problem: Users can login to hotspot from multiple devices simultaneously. Requirement: There should be no simultaneous logins per single account/username. Already did the following but to no avail. Create...
by cicserver
Thu Oct 19, 2017 11:33 am
Forum: General
Topic: Cisco InterVlan Routing with Mikrotik
Replies: 6
Views: 862

Re: Cisco InterVlan Routing with Mikrotik

IP routing is enabled on Cisco switch vlan2 ip 1192.168.2.1 user get ip 192.168.2.2 , gw 192.168.2.1 vlan3 ip 1192.168.3.1 user get ip 192.168.3.2 , gw 192.168.3.1 Vlan 2 & 3 users share heavy media files with each other & they access each other PC using local vlan provided ips like 192.168.2.2 OR 1...
by cicserver
Thu Oct 19, 2017 10:47 am
Forum: General
Topic: Cisco InterVlan Routing with Mikrotik
Replies: 6
Views: 862

Cisco InterVlan Routing with Mikrotik

I have following network topology. LAN clients gets ip's from main Cisco switch dhcp which have vlan assigned and intervlan ip routing is enabled. all vlan clients can communicate with each other using there dhcp ips because all clients have there default gateway pointed to there local vlan interfac...
by cicserver
Tue Oct 10, 2017 6:53 am
Forum: General
Topic: bypass mikrotik router for local ftp sharing
Replies: 1
Views: 743

bypass mikrotik router for local ftp sharing

Greetings, Recently I configured simple basic VLAN setup on Cisco 3750 switch and connect it with Mikrotik Router board using trunk port. VLAN setup is as follows. Mikrotik Router LAN Port = 10.0.0.0.1/24 [Connected with Cisco 3750 Port 1 , trunk] Cisco 3750 Port 1 = Trunk, connected with Mikrotik P...
by cicserver
Fri Nov 25, 2016 7:19 am
Forum: General
Topic: Failover with two redundant link
Replies: 3
Views: 1057

Failover with two redundant link

I have RB450G, and internet connection from my upstream provider via FIBER wire with one public IP on Port-1. As a backup they have provided me with second fiber which I have inserted in rb450g port 2. Right now I have added same ip on both interface and keep one interface disable. When primary fibe...
by cicserver
Mon Jul 25, 2016 9:22 am
Forum: General
Topic: Freeradius Unmetered Content
Replies: 1
Views: 571

Re: Freeradius Unmetered Content

I am also looking for this from long time.
I provide quota base packages to users, and when they download from out local FTP Media server, it counts too :(

How can we exempt any website/or our ftp server from accounting?
by cicserver
Mon Jul 25, 2016 8:55 am
Forum: General
Topic: Unmetered Content for local FTP
Replies: 0
Views: 397

Unmetered Content for local FTP

I have mikrotik as pppoe server along with freeradius as billing system,
How can I exclude my local ftp media servers from radius accounting quota limit. How can I do it ?
by cicserver
Mon Jul 18, 2016 7:28 am
Forum: Forwarding Protocols
Topic: ASN configuration in RB for public ip pool
Replies: 1
Views: 736

ASN configuration in RB for public ip pool

Scenario: I have mikrotik router board and acquired ISP connection via Fiber. They provided me one /30 public pool which i configured on my Mikrotik WAN. I acquired /24 public ip pool from APNIC and asked my ISP to route the /24 pool to my /30 mikrotik wan ip, and all is ok and my clients get public...
by cicserver
Mon May 23, 2016 6:18 am
Forum: Beginner Basics
Topic: How to block adult sites?
Replies: 26
Views: 46712

Re: How to block adult sites?

I would suggest to use OPENDNS, its free and works very well [99.99%] to block porn. you dont require static ip to block porn. here are there dns servers. 208.67.222.123 208.67.220.123 Make sure you redirect users dns request either to open dns or to your mikrotik where dns is configured to use open...
by cicserver
Thu May 12, 2016 6:49 am
Forum: General
Topic: Public IP routing and Squid Tproxy
Replies: 0
Views: 644

Public IP routing and Squid Tproxy

I am using mikrotik as pppoe server and provide public ip (Routed Pool) to users. Mikrotik WAN IP = 1.1.1.2/30 Users Pool = 2.2.2.0/24 Now I wan to add SQUID as TPROXY (So that users real ip should preserve). How can I connect squid box? how many interface would i be requiring in the squid box? shou...
by cicserver
Wed May 04, 2016 1:20 pm
Forum: General
Topic: PCC Exemption for specific Destination Site
Replies: 1
Views: 475

Re: PCC Exemption for specific Destination Site

Please..
by cicserver
Wed May 04, 2016 9:48 am
Forum: General
Topic: PCC Exemption for specific Destination Site
Replies: 1
Views: 475

PCC Exemption for specific Destination Site

I have 2 wan PCC configured and working ok. Now I want that any traffic going to destation 1.2.3.4 should *ALWAYS* route via WAN2 link only. (actually 1.2.3.4 is remote hosting SMTP server and they accept connection only from wan2 link) I made following rule. /ip firewall address-list add address=1....
by cicserver
Thu Apr 28, 2016 9:56 am
Forum: Beginner Basics
Topic: HOTSPOT: Assign different subnet ip to client after login
Replies: 1
Views: 837

HOTSPOT: Assign different subnet ip to client after login

I have HOTSPOT configured with following scenario. LAN +DHCP = 192.168.0.1/24 WAN = 1.2.3.4 HOTSPOT Config: Address Pool = None , Genera masquerade rule in place to allow internet (with no src-addres ) . Hotspot is working fine with this config. no issue. Now I want to assign users different pool fr...
by cicserver
Fri Apr 15, 2016 9:21 pm
Forum: Beginner Basics
Topic: marking client pc packets alongwith PCC
Replies: 0
Views: 377

marking client pc packets alongwith PCC

I have PCC configured in RB to load balance 4 wan links and working fine. now i want to mark few traffic from client, Example - Few ips mark as VIP - Few ips mark as Low End Users - Few downloads based on connection bytes My questions is , Can I do packt/routing marking with the PCC? as I can see th...
by cicserver
Tue Apr 12, 2016 2:02 pm
Forum: Beginner Basics
Topic: Route to second WAN based on extensions
Replies: 8
Views: 1056

Re: Route to second WAN based on extensions

Is there any way I can route few extension like exe or mp3 files to second WAN link ? will this routing work? Hi, Just some of my idea you can try to nat by layer7 or content: ip firewall nat add chain=srcnat content=".exe,.mp3" out-interface=Wan2 action=masquerade place-before=0 or: ip firewall fi...
by cicserver
Tue Apr 12, 2016 6:35 am
Forum: Beginner Basics
Topic: Route to second WAN based on extensions
Replies: 8
Views: 1056

Re: Route to second WAN based on extensions

I guess routing extension will not work. Ok I found 'connection-byte' marking method. but how it will going to work in following? I want to route files above then 100MB to second wan link , will this work? how it will work, it will route to second wan link after initial 100mb transfer or will it sen...
by cicserver
Mon Apr 11, 2016 11:23 am
Forum: General
Topic: L7 and youtube
Replies: 17
Views: 23151

Re: L7 and youtube

OK I pulled all IP from ASN 15169 , now YT routing to second WAN link, Primary objective achieved.
But now issue is that its dragging many other services like Gmail / Dropbox, apps etc. is there any way I can route only YOUTUBE ? how can i found just YOUTUBE IP Address list only ?
by cicserver
Mon Apr 11, 2016 9:04 am
Forum: Beginner Basics
Topic: Route to second WAN based on extensions
Replies: 8
Views: 1056

Route to second WAN based on extensions

Is there any way I can route few extension like exe or mp3 files to second WAN link ?
will this routing work?
by cicserver
Mon Apr 11, 2016 7:15 am
Forum: General
Topic: Routing Youtube Traffic Doesnt Work
Replies: 10
Views: 2175

Re: Routing Youtube Traffic Doesnt Work

OK I pulled all IP from ASN 15169 , now YT routing to second WAN link, Primary objective achieved.
But now issue is that its dragging many other services like Gmail / Dropbox, apps etc. is there any way I can route only YOUTUBE ? how can i found just YOUTUBE IP Address list only ?
by cicserver
Tue Apr 05, 2016 11:55 am
Forum: Scripting
Topic: Multiple IF Statement match and action accordingly
Replies: 4
Views: 2974

Re: Multiple IF Statement match and action accordingly

thx, it worked ok.
by cicserver
Mon Apr 04, 2016 11:13 am
Forum: Scripting
Topic: Multiple IF Statement match and action accordingly
Replies: 4
Views: 2974

Re: Multiple IF Statement match and action accordingly

if (condition) and (condition) do= Example: variable stored in script environment are var1 = up var2 = down I want if both variables value is equal to DOWN, then print "net is down" :local var1 [/sys scr environment print value where name=status1]; :local var2 [/sys scr environment print value wher...
by cicserver
Mon Apr 04, 2016 10:33 am
Forum: Scripting
Topic: Multiple IF Statement match and action accordingly
Replies: 4
Views: 2974

Multiple IF Statement match and action accordingly

How can i match two statements and if BOTH equals to xxx, act accordingly.
Example:

If variable 1 and Variable 2 values in environment are equal to DOWN, then execute script.
I search forum and google, but found only one statement match examples.
by cicserver
Sun Apr 03, 2016 12:23 pm
Forum: General
Topic: L7 and youtube
Replies: 17
Views: 23151

Re: L7 and youtube

I have two WAN links. the L7 works fine, the Queue works fine for these marked packets. but the problem is that when i try to route these marked packets to another WAN link, the VIDEO doesn't play. Other websites routing is working fine. its just YT videos not play when route packets. Is there any m...
by cicserver
Thu Mar 31, 2016 6:12 am
Forum: General
Topic: Routing Youtube Traffic Doesnt Work
Replies: 10
Views: 2175

Re: Routing Youtube Traffic Doesnt Work

Ok. is there any way we can get IP Address list for youtube and all of its CDN ? doesn't matter if it catches other traffic as well. but I really want to divert youtube traffic to different wan. Is there any possibility we can mark traffic based on extension for youtube? like flv mp4 etc? will it wo...
by cicserver
Wed Mar 30, 2016 7:38 am
Forum: General
Topic: Routing Youtube Traffic Doesnt Work
Replies: 10
Views: 2175

Routing Youtube Traffic Doesnt Work

I have tried to mark Youtube traffic by Layer7 using googlevideo and youtube reg expression.
Queuing works fine , but when I try to ROUTE these marked packets to another wan link, video doesn't play.

Have any one successfully route YOUTUBE to another WAN link ?
by cicserver
Wed Mar 16, 2016 7:26 am
Forum: General
Topic: quota limit with freeradius
Replies: 1
Views: 4461

quota limit with freeradius

I have setup freeradius 2.x with mysql as Billing system and Mikrotik as NAS (pppoe server). I have managed to configure few modules like time limit, expiration etc. but unable to configure volume QUOTA limit , e.g 100MB for user. I tried to take various examples from the google/forum but none of it...
by cicserver
Wed Feb 24, 2016 6:09 am
Forum: General
Topic: USSD Code error
Replies: 1
Views: 852

USSD Code error

I have Huawei E/173 usb modem connected with the mikrotik CCR.
SMS sending working fine. I am trying to running USSD code but its always giving error. I tried different channels as well but no use.
how can i solve it?
MT.PNG
by cicserver
Thu Feb 04, 2016 5:48 am
Forum: The Dude
Topic: HP Laserjet 2420n OID for Toner usage
Replies: 3
Views: 1781

Re: HP Laserjet 2420n OID for Toner usage

ok I found that it was some compatibility issue of the toner.
on another printer, i am able to get the correct toner stats using following.
TONER [string_substring(oid("1.3.6.1.2.1.43.11.1.1.9.1.1"))] % Remaining %
t.PNG
by cicserver
Wed Feb 03, 2016 8:01 am
Forum: The Dude
Topic: HP Laserjet 2420n OID for Toner usage
Replies: 3
Views: 1781

HP Laserjet 2420n OID for Toner usage

What OID or formula I can use to show Toner used % in dude. SNMP is enabled on printer. how to do it please? i tried to use following TONER [oid("1.3.6.1.2.1.43.11.1.1.9.1.1")/0.6000*100] % Remaining but its showing wrong. i have replaced with new toner (also tested half used toner but no use) print...
by cicserver
Mon Feb 01, 2016 6:33 am
Forum: General
Topic: Dynamic items unchangeable - why?
Replies: 44
Views: 7681

Re: Dynamic items unchangeable - why?

I downgraded to version 6.29 for test purposes, and now the queue is changing on the fly properly without disconnecting the active users.

(both hotspot and pppoe working ok now)
by cicserver
Wed Jan 27, 2016 7:33 am
Forum: Beginner Basics
Topic: Marking Youtube Traffic
Replies: 8
Views: 7375

Re: Marking Youtube Traffic

Try this:
/ip firewall layer7-protocol add name=youtube regexp="^.+(youtube.com).*$"
/ip firewall filter add chain=forward protocol=tcp dst-port=80,443 layer7-protocol=youtube action=drop comment="Block YouTube"
.
its giving following error
mterror.PNG
by cicserver
Tue Jan 26, 2016 7:59 am
Forum: Beginner Basics
Topic: Marking Youtube Traffic
Replies: 8
Views: 7375

Marking Youtube Traffic

Is there any way I can mark traffic for youtube ?
(so that i can route it to second gateway)

I saw few posts on forum as well but most guys telling that not working. any working solution for it?
by cicserver
Fri Jan 15, 2016 11:38 am
Forum: Beginner Basics
Topic: hotspot login by mac still show login page
Replies: 2
Views: 1684

Re: hotspot login by mac still show login page

exactly what I needed. Working Gr8. thanks for the sharing.
by cicserver
Mon Jan 11, 2016 8:33 am
Forum: Beginner Basics
Topic: hotspot login by mac still show login page
Replies: 2
Views: 1684

hotspot login by mac still show login page

Hi, I am using hotspot and linux base freeradius billing system. I have enabled login by mac and created users in radius with mac address. Problem is that when user tries to browse internet, he still see login page for first time, and in mikrotik logs, i can see user logged in by mac successfully. w...
by cicserver
Tue Dec 08, 2015 7:24 am
Forum: General
Topic: massive ddos and its prevention
Replies: 2
Views: 565

massive ddos and its prevention

Greetings, I am facing a big issue related to DDOS attack. there is a web site name "http://quezstresser.com/index.php". few of my opponents are using this site to send DDOS attack to my mikrotik. I tried to make many firewall rules from wiki and here there, but still i am unable to stop it. it have...
by cicserver
Mon Dec 07, 2015 9:49 am
Forum: Scripting
Topic: Changeip update not working any more
Replies: 19
Views: 4779

Re: Changeip update not working any more

i also faced this issue for about 2 weeks, but now its working.
by cicserver
Fri Nov 27, 2015 9:15 am
Forum: General
Topic: Scripting/Automating Multiple Wallled Garden Imports
Replies: 4
Views: 985

Re: Scripting/Automating Multiple Wallled Garden Imports

Sorry, I forgot to reply again here. # set some parameters for fetching dynamic walled garden entries :local server [:resolve "myserver.com"]; :local url "/prepare_walled_garden.php"; :local fileName "walled-garden.txt"; # set the comment marker that distinguishes dynamically entered entries :local...
by cicserver
Fri Nov 27, 2015 7:58 am
Forum: General
Topic: Centralize Mikrotik Scripts
Replies: 13
Views: 4565

Re: Centralize Mikrotik Scripts

any solution for lopp issue? i am using this script and its working perfect in 5.x version, but with version 6.33 its LOOPING and keep adding same hosts again n again until i stop it :(
by cicserver
Fri Nov 27, 2015 7:23 am
Forum: Scripting
Topic: Import list of IP's to ammend Address List
Replies: 12
Views: 7080

Re: Import list of IP's to ammend Address List

I am trying to use this method (but for importing hotspot walled garden list). on version 5.x it works fine BUT on 6.33 version, it goes in LOOP, means the file contains just 4 entries, but the script keep adding them again an again until i stop it manually. how can I remove this looping bug for 6.x...
by cicserver
Thu Nov 26, 2015 10:13 am
Forum: The Dude
Topic: Monitor Squid/Mysql Service from Mikrotik Dude.
Replies: 2
Views: 1318

Monitor Squid/Mysql Service from Mikrotik Dude.

is there any possibility that i can monitor remote linux services" Like squid/mysql is running or not?
I am using it for windows base system but no idea for linux.
by cicserver
Wed Nov 04, 2015 9:12 am
Forum: General
Topic: Dynamic items unchangeable - why?
Replies: 44
Views: 7681

Re: Dynamic items unchangeable - why?

In any version below 6.32.
So in 6.31.x it works.
Thank you I tried 6.29 and it worked !
by cicserver
Tue Nov 03, 2015 12:51 pm
Forum: General
Topic: Dynamic items unchangeable - why?
Replies: 44
Views: 7681

Re: Dynamic items unchangeable - why?

In which 6.xx version it works ?
by cicserver
Fri Oct 30, 2015 9:17 am
Forum: General
Topic: Timeout on Tool SMS
Replies: 2
Views: 890

Re: Timeout on Tool SMS

ok what i have noticed so far is that when i try to send many sms one by one via command or script, it eventually gives this error. After rebooting mikrotik, i dont send sms manually, and it works fine via scripting like different alerts sms works fine. I tested it for about weak and so far sms are ...
by cicserver
Thu Oct 15, 2015 7:26 am
Forum: Scripting
Topic: howto supress confirmation for reboot via script
Replies: 1
Views: 2029

howto supress confirmation for reboot via script

I have following script /system reboot OR /system reboot; but when i execute this script manually it asks for confirmation. how can I auto input Y so that i dont have to press key manually? Task is to reboot mikrotik from the script ON DEMAND (from the linux ssh execution, i can successfully ssh and...
by cicserver
Tue Oct 13, 2015 1:41 pm
Forum: General
Topic: gsm error : unable to load unread sms - timeout
Replies: 8
Views: 3751

Re: gsm error : unable to load unread sms - timeout

same here. (ver 6.32 / 6.29)
/too sms print

action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
by cicserver
Tue Oct 13, 2015 1:39 pm
Forum: General
Topic: Timeout on Tool SMS
Replies: 2
Views: 890

Timeout on Tool SMS

I have cloud core series and gsm usb modem attached with it. ON frequent basis i receive this error [admin@mikrotik] > /tool sms print action timed out - try again, if error continues contact MikroTik support and send a supout file (13) I tried ver 6.32.2 and 6.29 as well, but with same problem. I h...
by cicserver
Mon Oct 12, 2015 7:24 am
Forum: Scripting
Topic: script to get mikrotik health report via sms or scheduled on daily basis?
Replies: 1
Views: 885

script to get mikrotik health report via sms or scheduled on daily basis?

is there any way i can get details report on mikrotik via sms (and email) like health, system, internet status, ?
by cicserver
Fri Oct 09, 2015 8:45 am
Forum: Scripting
Topic: passing variable to script
Replies: 5
Views: 1272

Re: passing variable to script

Create global variable with some value (username1) :global variable username1 Use $variable in your script. When you need, simply change the value of specified variable: :global variable username2 This way you will be able to run same script, by only changing one variable. Ok I got it. Every time i...
by cicserver
Thu Oct 08, 2015 6:08 pm
Forum: Scripting
Topic: passing variable to script
Replies: 5
Views: 1272

Re: passing variable to script

IMHO the only way is to use global variables http://forum.mikrotik.com/viewtopic.php?f=9&t=23041 Thank you for your reply. I already read that before posting, but its not a neat solution. I wanted to pass simple variable like we do in bash. Example: /sys scr run Myscript username1 /sys scr run Mysc...
by cicserver
Thu Oct 08, 2015 2:54 pm
Forum: Scripting
Topic: passing variable to script
Replies: 5
Views: 1272

passing variable to script

how can i pass my dynamic variable from command to script?
example:
/sys script run MYSCRIPT MYVARIABLE
(MYVARIABLE can be dynamic like user1 or user2 etc)
by cicserver
Thu Oct 08, 2015 1:24 pm
Forum: Scripting
Topic: print specific user connection mark via command
Replies: 0
Views: 547

print specific user connection mark via command

Greetings, I have dual wan PCC configured with src-address as classifier. My requirement is to print connection mark of this ip, so that I can know on which wan user connection is going via. Example: I can print specific ip connection via /ip fir conn print where src-address~"192.168.0.1:" It prints...
by cicserver
Mon Sep 28, 2015 9:00 am
Forum: The User Manager
Topic: How Can i create Users without password only username in batch process
Replies: 2
Views: 1478

Re: How Can i create Users without password only username in batch process

Nice Tip! but username must be then COMPLEX enough so that guessing should be impossible for guest. IMO username should be 10-12 characters long.
by cicserver
Thu Sep 17, 2015 8:46 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

If I understand what you're trying to do, maybe you could add a blackhole route for the same destination with a higher distance. When the lower distance one becomes unreachable, the blackhole route will become active. For example: /ip route add disabled=no distance=1 dst-address=4.2.2.1/32 gateway=...
by cicserver
Wed Sep 16, 2015 8:50 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

I created two static routes like this /ip route add disabled=no distance=1 dst-address=4.2.2.1/32 gateway=pppoe-out1 scope=30 target-scope=10 add disabled=no distance=1 dst-address=4.2.2.2/32 gateway=pppoe-out2 scope=30 target-scope=10 Now in ip > route > rules , i added rules like this /ip route ru...
by cicserver
Wed Sep 16, 2015 6:57 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

/ip route rule add action=lookup-only-in-table dst-address=8.8.8.8/32 table=pppoe-out1 This will affect client traffic as well, unless you narrow it down with a src-address as well, but it is a way to force that destination to only ever use ppoe-out1. Otherwise what happens is if there is no active...
by cicserver
Tue Sep 15, 2015 8:24 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

Can anyone please help ?
by cicserver
Mon Sep 14, 2015 1:03 pm
Forum: Scripting
Topic: print specific value from command output
Replies: 1
Views: 2182

print specific value from command output

how can i get specific value only from the command ? Example i want to get only IP address of radius server from this command /radius print admin@TEST] > rad print Flags: X - disabled # SERVICE CALLED-ID DOMAIN ADDRESS SECRET 0 ;;; radius ppp 1.2.3.4 radsecret i want to print value of 1.2.3.4 only. ...
by cicserver
Mon Sep 14, 2015 6:43 am
Forum: The User Manager
Topic: howto get remainign days in user expiry via userman
Replies: 2
Views: 848

Re: howto get remainign days in user expiry via userman

hmmm i wish if userman can integrate mysql DB in it ;)
by cicserver
Mon Sep 14, 2015 6:40 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

you can put a router with pppoe-out1 then send an ip to your mikrotik this router will be your gateway as WAN1 we dont want to add another hop/router, dialing must be done via mikrotik. modems will act as bridge only. any other solution? I if I mark routing in OUTPUT chain it will solve my problem?...
by cicserver
Sun Sep 13, 2015 1:45 pm
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Re: Howto Force route for specific host via primary wan link

Hi... /ip firewall mangle add action=mark-routing chain=prerouting dst-address=8.8.8.8 new-routing-mark=WAN1_route /ip route add distance=1 gateway=1.1.1.1 routing-mark=WAN1_route change 1.1.1.1 with your WAN1 gateway @ronix when i run traceroute from mikrotik using both wan links, i see same gatew...
by cicserver
Sun Sep 13, 2015 1:41 pm
Forum: The User Manager
Topic: User manager reminders
Replies: 9
Views: 4718

Re: User manager reminders

you need to add this code in scripts
is there any possibility to implement it for PPPOE USERS (with userman)
?
by cicserver
Sun Sep 13, 2015 12:06 pm
Forum: The User Manager
Topic: howto get remainign days in user expiry via userman
Replies: 2
Views: 848

howto get remainign days in user expiry via userman

Hi
I have userman on 6.3.x rb series. I want to print users whose expiry is after 3 days. is there any code / script i can use to get such users list from script command? the goal is to get those users list and send email or sms alert ?
by cicserver
Sun Sep 13, 2015 11:03 am
Forum: General
Topic: Howto Force route for specific host via primary wan link
Replies: 10
Views: 2465

Howto Force route for specific host via primary wan link

Greetings all, I have two dsl links wan links on my routerboard. both dsl modems are configured in Bridge mode and dialing is being done by pppoe-client from RB by pppoe-out1 and pppoe-out2 . I have configured a WAN monitor script which monitor Primary wan link by ping to 8.8.8.8. I have create fixe...
by cicserver
Thu Aug 27, 2015 10:51 am
Forum: Scripting
Topic: Mirkotik send SMS via KANNEL
Replies: 4
Views: 1292

Re: Mirkotik send SMS via KANNEL

Almost... add "url" to that, and escape the "?": /tool fetch url="http://KANNELIP:13013/cgi-bin/sendsms\?username=kannel&password=passwordto=0123456677889&text=Welcome+Message+This+is+test+message" Thank you @boen_robot It worked perfectly ! in the mean while, I found this later with lots of exampl...
by cicserver
Thu Aug 27, 2015 8:06 am
Forum: Scripting
Topic: Script to restart pptp-out1 dialer when wan ip changes
Replies: 0
Views: 314

Script to restart pptp-out1 dialer when wan ip changes

Hello all, Hope every one is doing good here :) I need some help in scripting. at my home I have mikrotik router with pptp client which dials into my office network linux base pptp server. problem is that my home wan connectivity is very poor and frequently it gets disconnect and quickly re connect ...
by cicserver
Mon Aug 17, 2015 12:19 pm
Forum: General
Topic: SMTP Flooding using internally hosted mail server
Replies: 1
Views: 452

SMTP Flooding using internally hosted mail server

I have an email server hosted behind mikrotik. I forward port 25 from WAN interface to internal mail system using nat rule. at email server i also have Symantec anti spam installed. Yesterday I faced issue that my public ip got listed in BLACK LIST at barracuda and another spam list , I know my user...
by cicserver
Wed Aug 05, 2015 9:32 am
Forum: Scripting
Topic: Mirkotik send SMS via KANNEL
Replies: 4
Views: 1292

Re: Mirkotik send SMS via KANNEL

Can KANNEL accept requests from HTTP (based on which it would send an SMS)? If so, you should be able to use "/tool fetch". To send sms via kannel we use following in linux or via browser curl "http://KANNELIP:13013/cgi-bin/sendsms?username=kannel&password=passwordto=0123456677889&text=Welcome+Mess...
by cicserver
Tue Aug 04, 2015 5:57 pm
Forum: Scripting
Topic: Mirkotik send SMS via KANNEL
Replies: 4
Views: 1292

Mirkotik send SMS via KANNEL

How can I send SMS from Mikrotik using KANNEL (hosted on my radius box on same LAN ) ?

Example: I want to send some alerts like mikrotik status, health or others , generated by various scripts using KANNEL gateway?
by cicserver
Mon Aug 03, 2015 7:59 am
Forum: The User Manager
Topic: Sending Email/SMS Alert for Quota Users
Replies: 0
Views: 873

Sending Email/SMS Alert for Quota Users

Greetings to All, I have user manager with various profiles and quota limits for users. Is there any possibility that the system can send warning email/sms alert to users who reaches 80% of there quota limit? Can we do it with any script or likewise? The email should be send only one time when user ...
by cicserver
Thu Jul 30, 2015 8:45 pm
Forum: Scripting
Topic: Gett MAC addresses of MOBILE Devices from DHCP Lease
Replies: 8
Views: 3353

Re: Gett MAC addresses of MOBILE Devices from DHCP Lease

To write all android devices' MACs and hostnames to the router log: :foreach dev in=[/ip dhcp-server lease print detail as-value where host-name~"android\\-"] do={ /log info ("Device with MAC address" . ($dev->"active-mac-address") . " has the hostname " . ($dev->"host-name")); }; Thank you it work...
by cicserver
Thu Jul 30, 2015 8:25 pm
Forum: Scripting
Topic: Gett MAC addresses of MOBILE Devices from DHCP Lease
Replies: 8
Views: 3353

Gett MAC addresses of MOBILE Devices from DHCP Lease

Is there any possibility that I can get MAC Addresses of Mobile devices like ANDROID / IPHONE from the Mikrotik DHCP Leases ?

I want to get there HOSTNAME name and MAC Address (or mac addresses in ADDRESS LIST or file or whatever possible :) )
by cicserver
Tue Jun 30, 2015 7:48 am
Forum: General
Topic: Password recovery from backup file in 6.xx versions
Replies: 3
Views: 3646

Password recovery from backup file in 6.xx versions

How can I recover password from my backup file (taken from ROS 6.28). Most of the sites which can show password from backup file donot work any more with these new backup files.

Is there any way I can get the password back from my backup file ?
by cicserver
Tue Jun 30, 2015 6:18 am
Forum: Scripting
Topic: Display router downtime by script
Replies: 7
Views: 1492

Re: Display router downtime by script

How can I display total time of downtime? example above script shows only from - till time, how can i show lets say "router was down for 36 hours" or "router was down for 1 day 16 hours"?
by cicserver
Tue Jun 16, 2015 6:55 am
Forum: The Dude
Topic: redirect pppoe users to a webpage saved in mikrotik memory
Replies: 4
Views: 3314

Re: redirect pppoe users to a webpage saved in mikrotik memory

the operator asked to save pages in mikrotik internal memory which is by default not possible (to host html pages in mikrotik like web server). thin link spacemind posted requires web server hosted locally or externally. I used this on a small local network and it worked Howto install APACHE web ser...
by cicserver
Mon Jun 15, 2015 1:33 pm
Forum: Scripting
Topic: Display router downtime by script
Replies: 7
Views: 1492

Re: Display router downtime by script

Don't know how , but it worked perfectly :) Thank You All ! :)
by cicserver
Mon Jun 15, 2015 12:12 pm
Forum: Scripting
Topic: Display router downtime by script
Replies: 7
Views: 1492

Re: Display router downtime by script

actually what i want is to see the last tie when was router ok. so something like lastseen value and the current one on RB. so i can calculate difference for how long the RB was down.
by cicserver
Sun Jun 14, 2015 11:33 am
Forum: Scripting
Topic: Display router downtime by script
Replies: 7
Views: 1492

Re: Display router downtime by script

How can I print Specific Environment value only? Example I have script which updates an environemtn variable with current date time, now i want to print this variable only (without other details. for example if i try to get value from varibale it shows 3 lines and then in logs it doens't show any th...
by cicserver
Sat Jun 13, 2015 9:38 am
Forum: Scripting
Topic: Display router downtime by script
Replies: 7
Views: 1492

Display router downtime by script

Hi, I have a requirement that I want to know when router reboots, it should ECHO in LOG that when was last time router rebooted or powered off and how much time it was off by comparing it with current date/time. Example the script should show in LOGs as following Router last reboot (Value-A) : xx-da...
by cicserver
Mon Jun 08, 2015 6:34 am
Forum: Scripting
Topic: Print users count on specific or all vlan interface
Replies: 2
Views: 751

Print users count on specific or all vlan interface

Hi, I have 10 vlans configured in mikrotik. Now my task is to 1# Print number of active users on each LAN , example is vlan1 = 20 (20 is active number of users) vlan2 = 10 vlan3 = 15 2# Print specific vlan connected users numbers like vlan1 = 20 I tried to print like /interface vlan print brief from...
by cicserver
Tue Jun 02, 2015 12:44 pm
Forum: General
Topic: Cisco VLAN isolation with Mikrotik
Replies: 1
Views: 432

Re: Cisco VLAN isolation with Mikrotik

is creating such rule will be fine ? any side effects of it?
/ip firewall filter
add chain=forward comment=to_WAN" out-interface=WAN
add action=reject chain=forward comment="Block vlan subnets in forward" reject-with=icmp-net-prohibited src-address=\
    192.168.0.1-192.168.255.255
by cicserver
Tue Jun 02, 2015 11:17 am
Forum: General
Topic: Cisco VLAN isolation with Mikrotik
Replies: 1
Views: 432

Cisco VLAN isolation with Mikrotik

Greetings to all, I need some help. I have configured an cisco 3750 switch to create vlan and connected with mikrotik. Mikrotik have no firewall/nat rule at a moment. Configuration of switch is as follow Port 1 trunk = Connected with Mikrotik Port 2 = Laptop-A Port 3 = Laptop-B Mikrotik vlan interfa...
by cicserver
Mon May 25, 2015 5:54 pm
Forum: Scripting
Topic: Sharing an idea for sms reporting in mikrotik/linux
Replies: 3
Views: 843

Re: Sharing an idea for sms reporting in mikrotik/linux

Both ideas are great and as I can see from the snapshots, they are actually working. thanks for sharing the scripts, it helped me a lot because most of the time at remote locations, I don't have internet do its a very good and quickest way to get information from my Mikrotik System attached with the...
by cicserver
Fri May 22, 2015 7:14 am
Forum: Scripting
Topic: ssh to mikrotik & Print Active User in File not working
Replies: 2
Views: 569

ssh to mikrotik & Print Active User in File not working

I am trying this
/ppp active print count-only file=activeuser.txt
but it's not creating file. I have tried it in 5.x and 6.x versions.
by cicserver
Wed May 20, 2015 12:41 pm
Forum: Scripting
Topic: ssh to mikrotik and print log with spaces not working
Replies: 2
Views: 632

Re: ssh to mikrotik and print log with spaces not working

ssh admin@192.168.1.1 /log warning \"hi hello\"
Thanks a lot. It worked Gr8!
by cicserver
Wed May 20, 2015 9:49 am
Forum: Scripting
Topic: ssh to mikrotik and print log with spaces not working
Replies: 2
Views: 632

ssh to mikrotik and print log with spaces not working

I have configured password less login to mikrotik. Now I want to print an log entry in mikrotik LOG by ssh from my linux box but its not letting me print any text if it contains spaces For example this is not working ssh admin@192.168.1.1 /log warning "hi hello" expected end of command (line 1 colum...
by cicserver
Mon May 18, 2015 6:50 am
Forum: General
Topic: DMZ not accessible with PCC
Replies: 1
Views: 538

DMZ not accessible with PCC

I have mikrotik acting as pppoe server for user. DUAL WAN (wan links are pppoe client) PCC is also configured on same RB. At one separate port I have connected my radius server in it. inside LAN I can access it but from the internet its not accessible. I created config to do port forwarding but its ...
by cicserver
Sat May 16, 2015 12:30 pm
Forum: Beginner Basics
Topic: telnet error Protocol mismatch. Connection closed by foreign host.
Replies: 2
Views: 6261

Re: telnet error Protocol mismatch. Connection closed by foreign host.

If you want ssh, wouldn't it be better to use ssh instead of telnet? ;)

/system ssh address=192.168.1.1 port=1234 user=yourusername
:lol: it worked! strange I searched google and mikrotik forum but couldn't find or maybe couldn't see it

Thanks @Sob
by cicserver
Fri May 15, 2015 9:16 am
Forum: Beginner Basics
Topic: telnet error Protocol mismatch. Connection closed by foreign host.
Replies: 2
Views: 6261

telnet error Protocol mismatch. Connection closed by foreign host.

From my mikrotik box, I am trying to ssh to linu xbase host which have non standard port for ssh like 1234, but it gives following error after connecting /sys telnet 192.168.1.1 1234 Trying 192.168.1.1... Connected to 192.168.1.1. Escape character is '^]'. SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1.4 [an...
by cicserver
Mon May 11, 2015 11:01 am
Forum: The User Manager
Topic: Print out specific user profile only
Replies: 1
Views: 943

Re: Print out specific user profile only

got it :D
:put [/tool user-manager user get value-name=actual-profile  number="test"]]
by cicserver
Mon May 11, 2015 9:53 am
Forum: The User Manager
Topic: Print out specific user profile only
Replies: 1
Views: 943

Print out specific user profile only

I want to get actual-profile name of specific user only.
I tried
 /tool user-manager user print where username="test"
but it gives lots of details,
I want to print only the PROFILE name user "test" is belonged to
like

512k

how can I get this value? without any other details.
by cicserver
Mon May 11, 2015 8:48 am
Forum: Scripting
Topic: Renew User account with CLI in 'USER MANAGER'
Replies: 3
Views: 833

Re: Renew User account with CLI in 'USER MANAGER'

Thanks, It worked perfectly. Ok one more question. Is there any command I can use to print specific user profile ONLY? Example this command /tool user-manager user print but this command prints lots of data, I only want to see what profile user currently have? like 512k Flags: X - disabled, A - acti...
by cicserver
Thu May 07, 2015 1:40 pm
Forum: Scripting
Topic: Renew User account with CLI in 'USER MANAGER'
Replies: 3
Views: 833

Renew User account with CLI in 'USER MANAGER'

I have User Manager with different profiles. I want to know that is there any possibility that I can renew a user account via command? (not via userman gui)? example if a user account is expired , I want to refresh it via command,

Any help would be appreciated :)
by cicserver
Mon Apr 13, 2015 6:45 am
Forum: General
Topic: PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script
Replies: 4
Views: 893

Re: PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script

I know you have given right info, but dueto my lack of knowledge, I am unable to understand. Can you please give some rules examples :( does these two accept rules are necessary? I ahve just copied the pcc script from the internet and working fine, its just PORT FORWARDING issue :( I understand - b...
by cicserver
Sat Apr 11, 2015 12:53 pm
Forum: General
Topic: Dual wan pcc and ISP's Portal Access not working
Replies: 2
Views: 619

Dual wan pcc and ISP's Portal Access not working

Greetings to all, I need some help in routing specific destination request to go via specific wan in PCC. I have dual wan PCC working fine. Both ISP's have there own media portal and both have restricted that there ftp can be accessed only if the requests comes from there assigned IP subnet series. ...
by cicserver
Mon Mar 30, 2015 7:38 am
Forum: General
Topic: PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script
Replies: 4
Views: 893

Re: PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script

I know you have given right info, but dueto my lack of knowledge, I am unable to understand. Can you please give some rules examples :(
does these two accept rules are necessary? I ahve just copied the pcc script from the internet and working fine, its just PORT FORWARDING issue :(
by cicserver
Mon Mar 30, 2015 6:38 am
Forum: General
Topic: PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script
Replies: 4
Views: 893

PCC+ppppoe-server+pppoe_wanclient+Port Forward & changeip.com script

Greetings to all, My setup is as follows. 2 DSL links, modems are configured in bridge mode. Mikrotik is dialing the ISP Wan connection which are pppoe. This server is also configured as pppoe server for client end. I have configured PCC (source base address approach) for load balancing the wan link...
by cicserver
Tue Mar 17, 2015 7:13 am
Forum: Virtualization
Topic: Metarouter/ASTERIS IAX2 Trunking One-Way Voice Issue
Replies: 3
Views: 2589

Metarouter/ASTERIS IAX2 Trunking One-Way Voice Issue

I am looking for help on Asterisk IAX2 Trunking one-way voice issue. I am using free pbx v1.4 in linux server and install Asterisk v1.8.11.1 mikrotik meta-router. now when using IAX2 trunk mode getting one-way audio. But working fine with sip/ without IAX2 trunking. On other hand, we have installed ...
by cicserver
Fri Feb 20, 2015 6:00 am
Forum: General
Topic: Simulate thousands pppoe connections for test purposes
Replies: 2
Views: 762

Simulate thousands pppoe connections for test purposes

How can we simulate pppoe connection on routerboard? example is i have CCR model and I want to have an idea/test of resources / performance of RB as pppoe server by somehow simulating 1000 or 2000 pppoe connection? how can I do it ?
by cicserver
Thu Feb 19, 2015 12:20 pm
Forum: General
Topic: Routing skype to another wan link
Replies: 2
Views: 917

Re: Routing skype to another wan link

Perhaps other users can share their successful experience by routing skype over different gateways. But as skype can use 80 and 443 ports for data/voice/etc, it might be difficult to handle it.Another approach for this setup, - forward all traffic over second (slower gateway), including skype and o...
by cicserver
Wed Feb 18, 2015 11:51 am
Forum: Scripting
Topic: How initialized a variable by SMS ??
Replies: 30
Views: 8247

Re: How initialized a variable by SMS ??

Ok thank you very much for the update, I will test this in lab at weekends, and will post updates. :lol:
by cicserver
Wed Feb 18, 2015 6:24 am
Forum: Scripting
Topic: How initialized a variable by SMS ??
Replies: 30
Views: 8247

Re: How initialized a variable by SMS ??

:o
Dear DjM,
I was looking for it since long. Can you please provide more information? What ROS version you are using? Can you please provide any sample script in which we can pass variable?
by cicserver
Wed Feb 18, 2015 6:12 am
Forum: General
Topic: Routing skype to another wan link
Replies: 2
Views: 917

Routing skype to another wan link

Greetings to all,
In my RB, i have two wan links. Is there any way I can route only SKYPE traffic to second wan link ? like skype chat/file send/voice/video ?
Have any one successfully done it ?
by cicserver
Sat Jan 10, 2015 9:01 am
Forum: Scripting
Topic: script error for wan ip info
Replies: 3
Views: 1338

Re: script error for wan ip info

check this: /ip address :foreach i in=[ find interface=wan] do={ :local ip [get value-name=address $i] :local status [ get value-name=disabled $i] :if ($status = false) do={ :log error "ip address $ip" } } change the interface name.. Working Great Thanks man. I want to give but where the Add KARMA ...
by cicserver
Sat Jan 10, 2015 8:49 am
Forum: Scripting
Topic: Script required for change wan ip
Replies: 9
Views: 2627

Re: Script required for change wan ip

@cicserver the solution you are looking for is not very mature. Either you should try some tunneling to hide the traffic so that ISP cannot detect it, or contact ISP for some proper solution. In the meanwhile try this.Following script is for for 8 Public IP's. :D Its working like a charm :) thanks ...
by cicserver
Fri Jan 09, 2015 11:08 am
Forum: Scripting
Topic: script error for wan ip info
Replies: 3
Views: 1338

script error for wan ip info

I have Wan interface with 4 ips (means 4 ips are assigned to single interface and only one ip is active rest are disabled) I am using followign script to print WAN ip in LOG window :global externalInterface "ether1" :local currentIP :set currentIP [/ip address get [find interface="$externalInterface...
by cicserver
Fri Jan 09, 2015 8:03 am
Forum: Scripting
Topic: Script required for change wan ip
Replies: 9
Views: 2627

Re: Script required for change wan ip

Thank you @skot But the problem is that after applying what you posted. when internet is down , it changes ip to second one, but if the 2nd ip is also not working then it dont jump to 3rd or 4th, in short, if the net is down, it simply changes ip to second one, but if the second ip is also not worki...
by cicserver
Mon Jan 05, 2015 7:51 am
Forum: General
Topic: changeip.com script for ver 6.24
Replies: 4
Views: 5309

Re: changeip.com script for ver 6.24

Finally got it working with following: :local ddnsuser "CHANGEIP_USERNAME" :local ddnspass "CHANGEIP_PASSWORD" :local ddnshost "CHANGEIP_YOUR_DOMAIN_NAME" :local ddnsinterface "WAN_INTERFACE" :global ddnslastip :global ddnsip [ /ip address get [find interface=$ddnsinterface disabled=no] address ] :i...
by cicserver
Mon Jan 05, 2015 7:32 am
Forum: Scripting
Topic: Script required for change wan ip
Replies: 9
Views: 2627

Re: Script required for change wan ip

Ok. And what you already did for that? i am using a script (from blog) which can change ip to second only. example is here: BUT THE ISSUE IS IT CAN CHANGE IP TO 2ND IP ONLY, I HAVE /29 POOL AVAILABLE I WANT TO JUMP TO SECOND ONE 3RD ONE AND SO ON. i am using a script (from blog) which can change ip...
by cicserver
Mon Jan 05, 2015 7:17 am
Forum: General
Topic: changeip.com script for ver 6.24
Replies: 4
Views: 5309

Re: changeip.com script for ver 6.24

@eternal0
After running this script, I am getting error "invalid internal item number"
by cicserver
Fri Jan 02, 2015 1:36 pm
Forum: Scripting
Topic: Script required for change wan ip
Replies: 9
Views: 2627

Script required for change wan ip

I have a 4 public ips available, e.g: 1.1.1.1-1.1.1.4 I have configured only 1 wan ip on mikrotik wan interface i.e 1.1.1.1 Now I have a problem that my ISP some times block my wan ip address for one hour dueto some grey traffic passes sometimes from my LAN which is a requirement for my users. (this...
by cicserver
Fri Jan 02, 2015 1:26 pm
Forum: General
Topic: changeip.com script for ver 6.24
Replies: 4
Views: 5309

changeip.com script for ver 6.24

I recently upgraded mikrotik from 5.20 to 6.24 , now the ddns script for changeip.com is not working.
can one please post the updated changeip.com script for ver 6.xx?
by cicserver
Thu Jan 01, 2015 7:53 am
Forum: General
Topic: howto block hotspot shield
Replies: 5
Views: 3656

Re: howto block hotspot shield

I think the best way is to block these kind of sites by dns filtering. First you need to setup a transparent dns redirecting: /ip firewall nat add chain=dstnat action=redirect to-ports=53 protocol=udp dst-address-type=!local dst-port=53 add chain=dstnat action=redirect to-ports=53 protocol=tcp dst-...
by cicserver
Wed Dec 31, 2014 11:56 am
Forum: General
Topic: howto block hotspot shield
Replies: 5
Views: 3656

howto block hotspot shield

I believe many admins are searching for this. Howto effectively block the HOTSPOT SHIELD software. I have tried the method described in this forum/wiki and other places. But non work :( Is there anybody who have successfully blocked this Evil application? 8) any complete ip address list which hotspo...
by cicserver
Fri Dec 05, 2014 12:22 pm
Forum: General
Topic: Gateway unreachable when reconnect PPTP
Replies: 3
Views: 2176

Re: Gateway unreachable when reconnect PPTP

i was having the same issue but found the same solution as @rmmccann mentioned,
I got it from https://aacable.wordpress.com/2014/11/1 ... sconnects/
by cicserver
Fri Dec 05, 2014 12:17 pm
Forum: General
Topic: howto simulate pppoe connections for test
Replies: 0
Views: 427

howto simulate pppoe connections for test

How can we simulate pppoe connection on routerboard? example is i have CCR model and I want to test the resources / performance of RB as pppoe server by somehow simulating 1000 or 2000 pppoe connection? how can I do it ?
by cicserver
Fri Dec 05, 2014 12:16 pm
Forum: RouterBOARD hardware
Topic: RouterBOARD testing procedures
Replies: 33
Views: 28204

Re: RouterBOARD testing procedures

How can we silumate pppoe connection on routerboard? example is i have CCR model and I want to test the resources / performance of RB as pppoe server by somehow simulating 1000 or 2000 pppoe connection? how can I do it ?
by cicserver
Fri Dec 05, 2014 8:27 am
Forum: RouterBOARD hardware
Topic: Compatible SFP module for CCR1036-12g-4s
Replies: 5
Views: 2005

Re: Compatible SFP module for CCR1036-12g-4s

Ok I have managed to get this cable with coupler. but he issue is that its showing LINK OK , light on sfp port is also ok, but no data is passing.
(to show LINK OK message on sfp, i have to set it to 1gb manual (no auto negotiate), tried all the options but no luck,
What could be the reason ?
by cicserver
Mon Dec 01, 2014 8:10 am
Forum: General
Topic: Mikrotik as VPN client to Cisco ASA 5510
Replies: 1
Views: 1146

Mikrotik as VPN client to Cisco ASA 5510

I have a mikrotik routerboard for my local network. Now I want to establish vpn connectivity with another office who have CISCO ASA 5510 with VPN. currently I have to use Cisco vpn client in order to connect to there office. Is there any way I can connect my Mikrotik to there Cisco VPN ?
by cicserver
Wed Nov 19, 2014 8:42 am
Forum: General
Topic: i have problem with redirect in proxy rule
Replies: 1
Views: 2007

Re: i have problem with redirect in proxy rule

I am also facing this issue that only pages which are in DNS cache of mikrotik or client windows pc, then maintenance page comes ok, other wise fail to display. I added static entry for all sites pointing to a ip, but when internet comes back, user have to do flushcache , any proper work around to s...
by cicserver
Tue Nov 18, 2014 8:23 am
Forum: Beginner Basics
Topic: mikrotik to mikrotik vpcn client unreachable issue
Replies: 1
Views: 562

Re: mikrotik to mikrotik vpcn client unreachable issue

Ok I found solution for it.
instead of adding dynamic pptp interface in route, I added route in ppp section and now its working. thx to aacable guide as he wrote on my request.
by cicserver
Tue Nov 18, 2014 7:50 am
Forum: General
Topic: Gateway unreachable when reconnect PPTP
Replies: 3
Views: 2176

Re: Gateway unreachable when reconnect PPTP

have you find any solution for it ?
by cicserver
Tue Nov 18, 2014 7:39 am
Forum: Beginner Basics
Topic: mikrotik to mikrotik vpcn client unreachable issue
Replies: 1
Views: 562

mikrotik to mikrotik vpcn client unreachable issue

I have configured a VPN Server on Head office mikrotik router. At branch mikrotik I configured it as vpn client. connectivity is working ok at both end and clients can directly access each other with out natting as proper routes are setup. BUT when branch mikrotik goes offline/power off, and when it...
by cicserver
Tue Nov 18, 2014 5:19 am
Forum: RouterBOARD hardware
Topic: Compatible SFP module for CCR1036-12g-4s
Replies: 5
Views: 2005

Re: Compatible SFP module for CCR1036-12g-4s

fiber cable from ISP end cannot be replaced dueto lack of support from there end. I must find an solution to somehow connect (isp) SC connector to CCR. What converters or sfp modules I would be require? can you please name or part no that i can order?
by cicserver
Mon Nov 17, 2014 1:30 pm
Forum: RouterBOARD hardware
Topic: Compatible SFP module for CCR1036-12g-4s
Replies: 5
Views: 2005

Compatible SFP module for CCR1036-12g-4s

I recently acquired cCCR1036-12g-4s. I have two ISP's fiber connection which are connected with media converter then cat5 cable is inserted in mikrotik. I want to direct insert Fiber cable of ISP into CCR. I purchased S-53LC20D and its not compatible. Which sfp module i required to purchase to inser...
by cicserver
Tue Nov 11, 2014 1:10 pm
Forum: General
Topic: PPPoe IP assignment From IP pool
Replies: 2
Views: 1045

Re: PPPoe IP assignment From IP pool

have you found any solution for it ? i am suffering the same here.
by cicserver
Tue Nov 11, 2014 1:08 pm
Forum: Beginner Basics
Topic: pppoe public ip pool assignment
Replies: 0
Views: 587

pppoe public ip pool assignment

Hello, I am running pppoe server on mikrotik 6.21 Recently I acquired public ip pool from my local ISP to provide it to users. All thing working ok so far. the problem is every time the user connect to PPPoE server , he gets the same IP address as last connection IP address, while the IP pool has un...
by cicserver
Wed Nov 05, 2014 8:59 am
Forum: General
Topic: Site 2 Site VPN with same Subnet at Both Ends
Replies: 5
Views: 3257

Site 2 Site VPN with same Subnet at Both Ends

Hello Everyone, I am trying to configure a Site to Site branch connectivity using Mikrotik RB at both end. But the problem is that both sites have same subnet running at each other. e.g: SITE A users have 192.168.10.0/24 and SITE B also have same series. I cannot modify the IP addresses series at bo...
by cicserver
Wed Oct 29, 2014 7:43 am
Forum: Beginner Basics
Topic: Howto add any html page in hotspot ?
Replies: 0
Views: 354

Howto add any html page in hotspot ?

I want to redirect expired users to a non payment reminder page. Everything is working ok, but for the payment reminder html page, I am using external web server. To save resources, is it possible i can upload/host the html page on mikrotik rb (in hotspot folder or similar) ??
by cicserver
Wed Oct 22, 2014 8:34 am
Forum: Beginner Basics
Topic: Does Mikrotik Switches support STP
Replies: 6
Views: 1631

Re: Does Mikrotik Switches support STP

@plisken After showing this to my friend, he said that if you create bridge this way, you will not get wire speed, or lot of load on cpu, is it true? if yes then ? [keeping in mind that this is quite a heavy traffic network dueto lot of media sharing here there) also will this create fail over also ...
by cicserver
Wed Oct 22, 2014 6:43 am
Forum: Beginner Basics
Topic: Does Mikrotik Switches support STP
Replies: 6
Views: 1631

Does Mikrotik Switches support STP

Hi, I have two questions for mikrotik switches. 1- Does mikrotik switches support STP ? (Like Cisco does to prevent looping) 2- In these switches, how can I create ring network for high availability. for example I have a main switch at remote area, and I have provided two uplinks from different rout...
by cicserver
Tue Oct 14, 2014 2:34 pm
Forum: Beginner Basics
Topic: VLAN with CRS
Replies: 0
Views: 450

VLAN with CRS

I have main mikrotik acting as pppoe/hotspot server. Now i have acquire Mikrotik 24 ports switch.Now I want to implement VLAN to isolate user area. For example users from VLAN1 should not be able to communicate with VLAN2. CRS Example: Port 1 = Connected with Mirkotik RouterOS LAN port. Port 10= Are...
by cicserver
Fri Sep 19, 2014 1:14 pm
Forum: Scripting
Topic: Access Period based user script for hotspot users...
Replies: 3
Views: 1162

Re: Access Period based user script for hotspot users...

I am interested to know it too :)
by cicserver
Fri Sep 05, 2014 8:54 am
Forum: General
Topic: pptp/vpn server under attack
Replies: 1
Views: 703

pptp/vpn server under attack

I have configured pptp server on my mikrotik so that I can can connect from outdoor locations for some lan management and other purposes. (at home i have different isps with dynamic ips) Problem is that I see a lot of attempts from so many public IP addresses trying to connect with pptp server, How ...
by cicserver
Thu Sep 04, 2014 10:01 am
Forum: General
Topic: VPN server on PCC box
Replies: 0
Views: 378

VPN server on PCC box

I have dual PCC on RB.(and at some places four wan)
I wan to setup VPN server on same RB so that some remote users can dialin and get access to LAN.

Does VPN Server with PCC work? or what config would be required?
by cicserver
Wed Sep 03, 2014 5:33 pm
Forum: General
Topic: RB High CPU usage with IPSEC
Replies: 0
Views: 849

RB High CPU usage with IPSEC

I have three RB (rb750gl, rb1100ahx2,etc) with 5.26 firmware. all are working at different sites as a simple router configured as pppoe+hotspot server for lan users. all of them are having strange issue of HIGH cpu usage and in profile, it shows that IPSEC is chocking the CPU. there is no vpn or nay...
by cicserver
Wed Sep 03, 2014 12:47 pm
Forum: The Dude
Topic: Dude ping delay result showing 0 value
Replies: 0
Views: 966

Dude ping delay result showing 0 value

Hi, I am trying to display ping ms delay result in LABEL/APPEARANCE. for itneret hosts, its showing ok result like for gogole its showing 125ms. but for some LAN where I get 1ms delay, dude is showing 0, how can I show the right result ? using following code in label [array_element(ping(device_prope...
by cicserver
Wed Sep 03, 2014 11:56 am
Forum: The Dude
Topic: Display Value divid formula [SOLVED]
Replies: 10
Views: 1887

Re: Display Value divid formula

Finally got it. I think I had to add "getTemperature()" in AVAILABLE section too. attached is image of working config.
Thank you every one for your suggestions and guidance which encourage me to solve the issue :) ,

So I guess encouragement is the key to success ;)
final_resukltok.JPG
by cicserver
Tue Sep 02, 2014 2:02 pm
Forum: The Dude
Topic: Display Value divid formula [SOLVED]
Replies: 10
Views: 1887

Re: Display Value divid formula

yes i m getting value in appearance using the FUNCTION. but unabel to get DIVIDED value in the FUNCTION/PROBE :(
temp.JPG
by cicserver
Tue Sep 02, 2014 1:55 pm
Forum: The Dude
Topic: Display Value divid formula [SOLVED]
Replies: 10
Views: 1887

Re: Display Value divid formula

Try to use that function in the label display, to see if the function returns a correct value.
Yes I am getting value in appearance / label. something like
temp.JPG
by cicserver
Tue Sep 02, 2014 1:24 pm
Forum: The Dude
Topic: Display Value divid formula [SOLVED]
Replies: 10
Views: 1887

Re: Display Value divid formula

I created FUNCTION as you suggested, but still I am not getting DIVIDED value. see the snap of my Function & PROBE.
1234.JPG
123.jpg
by cicserver
Tue Sep 02, 2014 12:55 pm
Forum: The Dude
Topic: Display Value divid formula [SOLVED]
Replies: 10
Views: 1887

Display Value divid formula [SOLVED]

I have a Temperature & Humidity monitoring device (Emerson IRM-S02TH) I can get its value via snmp, but it gives value like this temperature, 1.3.6.1.4.1.13400.2.62.2.1.2.0 = 2220 so to show it correctly in Dude DISPLAY, i use this Temperature: [oid("1.3.6.1.4.1.13400.2.62.2.1.2.0")/100] and it work...
by cicserver
Mon Sep 01, 2014 2:14 pm
Forum: Beginner Basics
Topic: Broadcast/Loop prevention
Replies: 3
Views: 1694

Re: Broadcast/Loop prevention

I dont want to configure BRIDGE for a 24 port mikrotik switch.
is there any native option option to enable rstp for all ports?
by cicserver
Mon Sep 01, 2014 11:12 am
Forum: General
Topic: Bridge for Link failover?
Replies: 1
Views: 708

Bridge for Link failover?

Greetings, Two buildings are connected with each other via Fiber link. I also have P2p2 wireless connectivity between both ends. now I want that if Fiber link goes down, the link should auto switch Wireless link and when revert back if fiber link restore. Some one told me that I can do it with creat...
by cicserver
Mon Sep 01, 2014 9:13 am
Forum: Beginner Basics
Topic: Broadcast/Loop prevention
Replies: 3
Views: 1694

Broadcast/Loop prevention

I have a small network with un managed switches. How can I prevent Broadcast storm ? or loop broadcast?
in cisco , it shutdown the effected port, how can it be done automatic on mikrotik switches? any link for it ?
by cicserver
Mon Aug 25, 2014 8:02 pm
Forum: Beginner Basics
Topic: download upgrade package file directly on Mikrotik
Replies: 2
Views: 1403

download upgrade package file directly on Mikrotik

I have few mikrotik boxes with old 5.x which dont have check upgrade option
Is there any way I can download the file on mikrotik directly by command ? (so that I dont have to manually upload the file on that box, because usually at my site, my UPLINK is very slow)
by cicserver
Mon Aug 25, 2014 8:00 pm
Forum: General
Topic: Load balancing DNS requests
Replies: 2
Views: 1323

Load balancing DNS requests

Can we load balance DNS server requests with other servers in Mikrotik? like in round robin style ?
by cicserver
Fri Aug 22, 2014 12:27 pm
Forum: General
Topic: Dual wan PCC using one wan only
Replies: 5
Views: 1393

Re: Dual wan PCC using one wan only

yes both wan rules packets are counting in mangle, but as i mentioned previous, WAN-1 is counting fine, but wan-2 mangle rule is counting very less packets ratio is something like
packets for wan1 = 100 ,
wan2 = 5 or 10
by cicserver
Fri Aug 22, 2014 10:15 am
Forum: General
Topic: Dual wan PCC using one wan only
Replies: 5
Views: 1393

Re: Dual wan PCC using one wan only

I am using both-addressess-and-ports classifier so it should auto load balance requests among both wan, I am testing by putting maximum load from LAN side, using IDM to download multiple big files, but still it downloads from WAN-1 only. and if power of wan-1 , then the wan-2 starts to utilize fully.
by cicserver
Fri Aug 22, 2014 7:32 am
Forum: General
Topic: Dual wan PCC using one wan only
Replies: 5
Views: 1393

Dual wan PCC using one wan only

Dear all, I am stucked in a situation and I need your help. I have a mikrotik RB acting as a PCC (gateway) load balancing two wan links. both links are of same quality. I have tested them separately and they work fine equally. Issue is that only one WAN-1 link is used and second WAN-2 remains idle, ...
by cicserver
Thu Aug 21, 2014 8:51 am
Forum: Beginner Basics
Topic: Username in web proxy Logs or squid logs
Replies: 3
Views: 881

Re: Username in web proxy Logs or squid logs

I just want to have proper logs of users browsing, either via Mikrotik web proxy, or route them to SQUID proxy.
by cicserver
Wed Aug 20, 2014 1:16 pm
Forum: General
Topic: Advertisement page for pppoe users
Replies: 1
Views: 534

Advertisement page for pppoe users

I have pppoe server, I want that when user login, he should be redirected to one of my ad page, after that he can continue browsing, like I can do it in hotspot using
$(link-orig)
code.
by cicserver
Wed Aug 20, 2014 1:14 pm
Forum: Beginner Basics
Topic: Username in web proxy Logs or squid logs
Replies: 3
Views: 881

Username in web proxy Logs or squid logs

How can I log users browsing with there user name ? (instead of ip address)
by cicserver
Sun Aug 03, 2014 2:06 pm
Forum: General
Topic: Users Browsing Logs with USER NAME
Replies: 0
Views: 346

Users Browsing Logs with USER NAME

How can I log users browsing with there user name ? (instead of ip address)
by cicserver
Wed Jul 30, 2014 1:15 pm
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

Hi, "Allowing less secure apps" on gmail don't assure that the mail will be sent. Sometimes it is sent and sometimes not, I don't know why. Are the people here COMPLETELY SURE that upgrading to 6 solves the problem and that this is the only solution? Anybody has had 100% success sending mails still...
by cicserver
Sat Jul 26, 2014 7:46 pm
Forum: General
Topic: User not active on NAS but active on Radius
Replies: 1
Views: 835

User not active on NAS but active on Radius

Hi, I am using DMASOFTLAB Radius Manager (freeradius backend) along with Mikrotik as hotspot and pppoe server. I have following two issues Issue # 1 Some time a user is shown active on PPPoE as well as on hotspot, mac address shows for both sessions are are different , which means a single user is u...
by cicserver
Sat Jul 26, 2014 7:31 pm
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

Is not one issue, gmail one day decide to mark as insecure all the clien who are not supporting some crypto protocols. 6.x as the new protocols, but on 5.x are not presents and for this are considered unsecure. Simply go on gmail and change the option as I write before. I have already checked this ...
by cicserver
Thu Jul 24, 2014 9:48 pm
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

in RouterOS v6.17 this command works fine: [admin@normis] > /tool e-mail send server=173.194.66.108 port=587 user=mygmailid password=mygmailpassword to=myinbox@hotmail.com subject=test body=test from=mygmailid@gmail.com start-tls=yes (I am using "start-tls" because syntax is different in v6.17) So ...
by cicserver
Thu Jul 24, 2014 9:32 pm
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

I have tried every one suggestions , but no results, I still get INVALID FROM ADDRESS. It seems its picking subject as a from address, strange. If I change subject, it gives this address as invalid from address.

As showed in the image below...
by cicserver
Thu Jul 24, 2014 11:23 am
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

Hmm then I must ask for the confirmation before upgrade, as there are so may RB's with 5.26.
Is Gmail mail send support not working with 5.26 ?
Can other members confirm this?
by cicserver
Thu Jul 24, 2014 11:07 am
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Re: Mikrotik with Gmail Stopped working

in RouterOS v6.17 this command works fine:
(I am using "start-tls" because syntax is different in v6.17)
So maybe time to upgrade?
So are you saying that now i cannot send email using gmail id in mikrotik 5.x ? Do I have to upgrade must ?
by cicserver
Thu Jul 24, 2014 10:32 am
Forum: General
Topic: Mikrotik with Gmail Stopped working
Replies: 21
Views: 4793

Mikrotik with Gmail Stopped working

I am using Mikrtoik 5.26 at various branches, and have configured gmail account which sends me mikrotik backup and other alerts daily. It was working fine from past few months BUT from 23rd July, it have stopped sending me emails, and seeing errors in logs like error sending e-mail <test>: invalid F...
by cicserver
Sat Jul 05, 2014 9:19 am
Forum: The User Manager
Topic: User Manager 3.x Migration to 5.26
Replies: 1
Views: 1261

User Manager 3.x Migration to 5.26

I have a old mikrotik 3.3x box running in a network with User Manager which have around 1500 users.
Now I want to upgrade, How can I migrate User Manager (MT) 3.x users to 5.x ?
by cicserver
Thu Jun 19, 2014 11:13 am
Forum: General
Topic: Redundancy for Fiber & Wireless Link with Same Single IP
Replies: 9
Views: 1358

Re: Redundancy for Fiber & Wireless Link with Same Single IP

If I disable the interface or ip address on fiber link, then how come script will know the main fiber link is up and it should switch back ?
by cicserver
Thu Jun 19, 2014 6:36 am
Forum: General
Topic: Redundancy for Fiber & Wireless Link with Same Single IP
Replies: 9
Views: 1358

Re: Redundancy for Fiber & Wireless Link with Same Single IP

Ok as a workaround I have made a script which check ISP gateway and internet host, if it found no response, it disables the fiber interface, and enable the wireless lin interface which have same ip configured as fiber link. It then sends me an alert email so that I get aware of link down, and when f...
by cicserver
Tue Jun 17, 2014 7:32 pm
Forum: General
Topic: Redundancy for Fiber & Wireless Link with Same Single IP
Replies: 9
Views: 1358

Re: Redundancy for Fiber & Wireless Link with Same Single IP

I would ask for a different subnet for the second link and use two default routes with cost 1 and cost 2.If they set you up with a wireless backup to your existing fiber one, I bet the both terminate in the same router, assigning a different subnet to a second interface won't be that painfull.cheer...
by cicserver
Tue Jun 17, 2014 7:31 pm
Forum: General
Topic: Redundancy for Fiber & Wireless Link with Same Single IP
Replies: 9
Views: 1358

Re: Redundancy for Fiber & Wireless Link with Same Single IP

I am afraid this would require some scripting. The way I am thinking about it, is assign the IP to the two interfaces, but leave the backup interface disabled like: /ip address add address=1.1.1.1/24 interface=wlan1 add address=1.1.1.1/24 interface=sfp1 /interfaces set wlan1 disabled=yes Then, if t...
by cicserver
Tue Jun 17, 2014 12:23 pm
Forum: General
Topic: Redundancy for Fiber & Wireless Link with Same Single IP
Replies: 9
Views: 1358

Redundancy for Fiber & Wireless Link with Same Single IP

I have main fiber link with one public IP address. Yesterday the ISP have provided me wireless backup link, it uses the same IP/GW , just the transmission medium is different that is Wireless. I want to put both cables in mikrotik RB and if Fiber goes down it should automatically use the wireless li...
by cicserver
Thu Jun 12, 2014 10:39 am
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd [SOLVED]

You can not ping http://www.google.com on script, you must resolve first the DNS to IP... Is strange: where you have put the script? I am not using google.com, I am using PUBLIC IP addresses for test purpose like isp gateway IP and 8.8.8.8. I add the script in SCRIPT section like I use to add other...
by cicserver
Thu Jun 12, 2014 9:43 am
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd

I am facing following issue.
After the script runs, it do logs, but no variable is displayed in VARIABLES section of the script.
The previous version of the script which check s only single host was making variables fine.
1.JPG
by cicserver
Wed Jun 11, 2014 8:27 am
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd

You are welcome, to add more hosts would be easy, how many would you like to check for how many repeats? Do you want to consider the link down only if all the attempts fail? As for the netwach functionality, i believe it pings just once and makes its decision upon the outcome. Ping at least 2 Hosts...
by cicserver
Wed Jun 11, 2014 7:11 am
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd

Man, try to read the reply after your previous post ! Dear mainTAP , I am really grateful to you for the script. It's working fine, But the issue is that it checks only single / one HOST. I want to check at least 2 hosts for cross verification. Is it possible to add? how? One question more, How man...
by cicserver
Mon Jun 09, 2014 2:00 pm
Forum: Beginner Basics
Topic: ICMP blockin for IN, but allow for outgoing
Replies: 3
Views: 2550

Re: ICMP blockin for IN, but allow for outgoing

Thank you for your reply Sir. When I apply only following rule. /ip firewall filter add action=drop chain=input comment="DROP PING ICMP N WAN INTERFACE" disabled=no in-interface=WAN protocol=icmp Then ping of mikrotik itself to outer world also stopped. and what I want is that mikrotik should be abl...
by cicserver
Mon Jun 09, 2014 1:37 pm
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd

Lolz everyone have forgotten the real question asked by me in this thread, and started there conversation :P Can any one please post a script which can check at least two or three wan hosts, and if found all of three dead, then its should change the route distance (or whatever action I would like i...
by cicserver
Sun Jun 08, 2014 12:48 pm
Forum: Beginner Basics
Topic: ICMP blockin for IN, but allow for outgoing
Replies: 3
Views: 2550

ICMP blockin for IN, but allow for outgoing

I want to block ICMP traffic on WAN interface (so no one from internet can ping my wan ip) but I want Mikrotik itself to ping any one. How is it possible. I am using following rule, but its also blocking ping of mikrotik itself to out world. 5 ;;; Allow Mikrotik itself (localhost) to PING OUTSIDE WO...
by cicserver
Thu May 29, 2014 6:30 am
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Re: Internet Connectivity Monitor Script requierd

I think I will not be able to understand the script coding :D as i m really dumb in this section.
I will be really thankful to you if you post an example code , Plzzz
by cicserver
Wed May 28, 2014 1:20 pm
Forum: Scripting
Topic: Internet Connectivity Monitor Script requierd [SOLVED]
Replies: 28
Views: 7498

Internet Connectivity Monitor Script requierd [SOLVED]

Currently I am using Internet monitoring script (actually NETWATCH) which check Google Dns IP 8.8.8.8 and if receive no ping reply , it switches to my backup link by changing route distance. working fine. But the issue is that sometime Google DNS ping timeout dueto my ISP issue and rest of internet ...
by cicserver
Thu May 15, 2014 9:05 am
Forum: Beginner Basics
Topic: log: excessive or late collision, link duplex mismatch ????
Replies: 24
Views: 47930

Re: log: excessive or late collision, link duplex mismatch

Hello, The logs are warning about a misconfiguration. There is a duplex mismatch on the link. RB411AH has disabled autonegotiation (100Mbit, full duplex), but the RB750G has autonegotiation enabled which leads to packet collisions on the link. More information: http://en.wikipedia.org/wiki/Autonego...
by cicserver
Mon May 12, 2014 2:29 pm
Forum: General
Topic: Customized WAN Load Balancing required
Replies: 1
Views: 519

Customized WAN Load Balancing required

I have RB1100ahx2 with 6 WAN links. eth1-eth2-eth3 = ISP.A eth4-eth5-eth6 = ISP.B eth7 = LAN What I want is that browsing (internet sites) should be routed to ISP.A , and download like mp3 zip exe rar should be routed to ISP.B Is there any possibility? If not possible, then is it possible that (supp...
by cicserver
Tue Apr 29, 2014 1:56 pm
Forum: Beginner Basics
Topic: PPOE Multiple Public IP Addresses & NAT / Port Forwarding
Replies: 2
Views: 735

Re: PPOE Multiple Public IP Addresses & NAT / Port Forwardin

I used this person guide from the Googling and was able to sort my /29 port forwarding issues.
http://aacable.wordpress.com/2013/11/13 ... orwarding/
by cicserver
Tue Apr 29, 2014 10:15 am
Forum: Beginner Basics
Topic: Providing Clients with /29 /30 Public IP Pool via Mikrotik
Replies: 1
Views: 777

Providing Clients with /29 /30 Public IP Pool via Mikrotik

I posted an topic on how can we provide public ip's to clients via pppoe using Mikrotik. http://forum.mikrotik.com/viewtopic.php?f=13&t=84263 Its successful , thanks to all members. Now I want to go a further step ahead. As my ISP is routing /24 public ip pool which is i m using to provide customers...
by cicserver
Fri Apr 25, 2014 2:10 pm
Forum: Beginner Basics
Topic: Beiginner question for User Public Ip Routing
Replies: 7
Views: 1535

Re: Beiginner question for User Public Ip Routing

It means I dont have to add any 2.2.2.x series ip on any of the interface manually, Right? Public IP users will work auto once they connected to pppoe via there dialer and get public from the pool (off course they will be excluded from the default nat rule) Sorry for asking silly questions, I know i...
by cicserver
Fri Apr 25, 2014 7:21 am
Forum: Beginner Basics
Topic: Beiginner question for User Public Ip Routing
Replies: 7
Views: 1535

Re: Beiginner question for User Public Ip Routing

Sorry I am Unable to understand :( Can you please explain it a little more? will there be any requirement to create route for 2.2.2.0/24 subnet to any where? any example? Or should i have to create src-nat rule ? like /ip firewall nat add chain=srcnat src-address=2.2.2.0/24 action=src-nat to-address...
by cicserver
Thu Apr 24, 2014 1:15 pm
Forum: Beginner Basics
Topic: Beiginner question for User Public Ip Routing
Replies: 7
Views: 1535

Re: Beiginner question for User Public Ip Routing

So your ISP needs to route 2.2.2.0/24 towards your router. e.g. by adding a route for it pointing to 1.1.1.2 ( the wan site of your router ) you just create a 2nd pool/profile for users with public IPs. Important is that you exclude the traffic from those users from the natting. to achieve that you...
by cicserver
Tue Apr 22, 2014 5:32 pm
Forum: Beginner Basics
Topic: Beiginner question for User Public Ip Routing
Replies: 7
Views: 1535

Beiginner question for User Public Ip Routing

I have a mikrotik base pppoe server with /29 (1.1.1.1/29) public pool for my WAN, example 1.1.1.1 is ISP gateway and 1.1.1.2 is on mikrotik wan interface. and users gets private Ip series (192.168.1.0/24) via pppoe server which then gets natted. everything ok. Now I want to provide public to some cl...
by cicserver
Wed Apr 16, 2014 2:05 pm
Forum: General
Topic: caller-id with two mac possible?
Replies: 1
Views: 491

caller-id with two mac possible?

I use caller-ID option from User Manager OR local Secrets Options, since many users have two computers at there home, and sometimes they want to connect laptop, and some times desktop pc, How can I allow allow two mac address in Caller-ID (so that only one session at a time can be connected from eit...
by cicserver
Wed Apr 16, 2014 2:01 pm
Forum: General
Topic: Upload from WAN1, Download from WAN2
Replies: 7
Views: 2986

Re: Upload from WAN1, Download from WAN2

Hmmm v.sad :( I over expected the Mikrotik can do any thing (except doing laundary and making tea) :lol: , however its my mistake to over expect thing that are not possible. but still i m looking for wan up/down routing.
Anyway thank you Mr. rextended for your quick response :)
by cicserver
Wed Apr 16, 2014 9:42 am
Forum: General
Topic: Upload from WAN1, Download from WAN2
Replies: 7
Views: 2986

Upload from WAN1, Download from WAN2

I have two WAN links of same speed.
I want to dedicate WAN2 for UPLOAD. How this can be done?
An article on WIKI doesn't work, browsing stopped after implementing it.
by cicserver
Thu Mar 27, 2014 12:00 pm
Forum: Scripting
Topic: PPTP Blocking attemps
Replies: 5
Views: 2739

Re: PPTP Blocking attemps

I am also interested to know ... :D
by cicserver
Thu Mar 27, 2014 11:57 am
Forum: Beginner Basics
Topic: User Management Question on a WISP
Replies: 8
Views: 2486

Re: User Management Question on a WISP

Radius Manger? Radius Manager from http://www.dmasoftlab.com/ DMASOFTLAB i an excellent radius billing system. just once time license (which is way too cheap as compared to its features) its brilliant piece of coding :). I used few guides from Google and was able to setup complete billing system in...
by cicserver
Sun Mar 09, 2014 7:42 am
Forum: General
Topic: SKYPE Queue Priority
Replies: 3
Views: 1996

Re: SKYPE Queue Priority

I am also using 5.26 I tried following but it didn't worked as expected. I want to give full bandwidth sky VOICE/VIDEO. /ip firewall layer7-protocol add name=skypenack regexp="[\\\\|\\xd5]" /ip firewall mangle add action=add-src-to-address-list address-list=skype address-list-timeout=1h \ chain=forw...
by cicserver
Sat Mar 08, 2014 5:30 pm
Forum: General
Topic: SKYPE Queue Priority
Replies: 3
Views: 1996

SKYPE Queue Priority

I am using 5.26.
How can I mark traffic for SKYPE (to give full bandwidth to SKYPE VOICE/VIDEO via simple queue) ?
I have tried few scripts but didn't worked out.

Any one have any working updated method that can mark prioritize SKYPE traffic ?
by cicserver
Wed Mar 05, 2014 7:14 am
Forum: Scripting
Topic: Script to print Simultanous logged in user
Replies: 0
Views: 442

Script to print Simultanous logged in user

I have a pppoe and hotspot server configured in single server.
I want a script that can print hotspot users which are simultaneous logged in from multiple computers using same ID. (in LOG Window)
by cicserver
Mon Mar 03, 2014 9:13 am
Forum: Scripting
Topic: cloned mac
Replies: 1
Views: 800

cloned mac

I have a problem of MAC Clonning from client end in my HOTSPOT server. I have Simple Access points all over the area in simple bridge mode. Now I want a script that can check CLONNED mac address in Mikrotik hotspot , and then LOG it. How can I prevent such problem? I found one script for PPPoE but i...
by cicserver
Wed Feb 26, 2014 7:18 am
Forum: Scripting
Topic: Single User Simultanous login on pppoe+hotspot
Replies: 1
Views: 1460

Single User Simultanous login on pppoe+hotspot

I have a RB in which pppoe + hotspot with userman is configured. issue is that if a user is connected with pppoe on his PC, he can also use the same ID password to connect his mobile device via hotspot too. How can I prevent this? OR any script that can check active users on pppoe and hotspot and co...
by cicserver
Tue Feb 25, 2014 8:30 am
Forum: The User Manager
Topic: Mikrotik User Manager shared users badnwidth
Replies: 1
Views: 1459

Mikrotik User Manager shared users badnwidth

with reference to: http://forum.mikrotik.com/viewtopic.php?f=10&t=50847 I have a user (1mb profile) who wants to use 2 or 3 computers at there home, so I set shared users options for him, but the issue is that when he conencts 2 computers with the same ID , 2 queues are created in QUEUES section, so...
by cicserver
Tue Feb 25, 2014 7:48 am
Forum: Scripting
Topic: [SOLVED] Script to export users from PPP to Userman
Replies: 5
Views: 3289

Re: Script to export users from PPP to Userman

thanks mr.scot, problem solved,
by cicserver
Mon Feb 24, 2014 7:06 am
Forum: Scripting
Topic: [SOLVED] Script to export users from PPP to Userman
Replies: 5
Views: 3289

[SOLVED] Script to export users from PPP to Userman

I have around 500 users in PPP/Secret section (pppoe users)
I want to migrate these users to User manager (with fix profile of 512kb)

Is there any script which can read from ppp section and then create all users in Userman ??
by cicserver
Mon Feb 24, 2014 6:57 am
Forum: Beginner Basics
Topic: How to block and stop torrent download
Replies: 15
Views: 12285

Re: How to block and stop torrent download

I tried this [copied from http://aacable.wordpress.com blog and at last, it worked fine for me] /ip firewall layer7-protocol add comment="P2P WWW web base cnoetent Matching / Zaib" name=p2p_www regexp=\ "^.*(get|GET).+(torrent|thepiratebay|isohunt|entertane|demonoid|btjunkie|mininova|flixflux|vertor...
by cicserver
Mon Feb 24, 2014 6:54 am
Forum: Scripting
Topic: [SOLVED] FIND with WILDCARD syntax HELP required
Replies: 3
Views: 2827

Re: FIND with WILDCARD syntax HELP required [SOLVED]

Thanks Mr. Scot & mrz,

I tried Scot method and it worked like a charm :D
Solved !
by cicserver
Fri Feb 21, 2014 7:56 am
Forum: Scripting
Topic: [SOLVED] FIND with WILDCARD syntax HELP required
Replies: 3
Views: 2827

[SOLVED] FIND with WILDCARD syntax HELP required

Greetings, I wan to print (:log info) all hotspot users account who DO NOT have word "special" in comments. For example, Currently users have following comments: user1 = special library user2 = special xyz garden user3 = 123 special lobby user4 = ordinary single user5 = double ordinary Now I want to...
by cicserver
Sat Feb 08, 2014 2:09 pm
Forum: Scripting
Topic: Hotspot Password Change Form
Replies: 1
Views: 2095

Hotspot Password Change Form

I am trying to provide a simple password change option to hotspot users. After user is logged in to hotspot system using there credentials & when they try to access the password change page, they always get following error ... We're sorry, but we can't change your password right now. Please try agai...
by cicserver
Wed Dec 04, 2013 12:01 pm
Forum: Beginner Basics
Topic: PCC and Four PPTP clients
Replies: 0
Views: 4569

PCC and Four PPTP clients

I want to setup four wan PPTP base PCC load balancer. but the issue is that pptp doesn't let me choose the out-interface (as we have option i PPPoE client) , I have pptp wan connection but its MAC address binded.

So how can I define out-interface in each pptp client?
by cicserver
Fri Nov 22, 2013 8:11 am
Forum: General
Topic: PCC with Netwatch Style Script?
Replies: 6
Views: 1264

Re: PCC with Netwatch Style Script?

Hi cicserver. Did you ever find a working solution for this? Yes, I followed scenario no 2 described in thsi awesome guide. But i implemented it on two WAN links, and it works perfect. using this approach I get mroe control over the frequency, and it also sends an email if any specific Critical WAN...
by cicserver
Tue Nov 12, 2013 8:12 am
Forum: Beginner Basics
Topic: /29 public pool in one interface and port forwarding
Replies: 1
Views: 750

/29 public pool in one interface and port forwarding

Hi, I have RB750 , and have a /29 public ip pool. I have configured all 5 useable ips on ether1-wan now on lan side i have few servers and i want to do port forwarding for various services. For example. I have created a dst-nat rule that do port forward for 1.2.3.4:25 to local 192.168.1.1:25 1.2.3.5...
by cicserver
Thu Oct 31, 2013 11:58 am
Forum: Beginner Basics
Topic: Monitoring mikrotik Queue tree with linux base MRTG
Replies: 1
Views: 1601

Monitoring mikrotik Queue tree with linux base MRTG

I am monitoring mikrotik simple queues with linux base MRTG. but it have issues in QUEUE TREE in simple queue, i get bytes IN bytes OUT , BUT in queue tree, i get only following [admin@MikroTik] > /queue tree print oid Flags: X - disabled, I - invalid 0 X name=.1.3.6.1.4.1.14988.1.1.2.2.1.2.16777216...
by cicserver
Mon Sep 16, 2013 6:57 am
Forum: General
Topic: Mikrotik 6 and ZPH queue
Replies: 4
Views: 910

Mikrotik 6 and ZPH queue

I recently upgraded to ver 6.x and the ZPH queue tree no longer working.
How to get it running again? what rule?
by cicserver
Wed Jun 19, 2013 8:39 am
Forum: Beginner Basics
Topic: Mikrotik CCR & ZPH
Replies: 4
Views: 1220

Mikrotik CCR & ZPH

I recently bought CCR series which have ROS 6.x

Previously on mikrotik 5.20, I was using using mangle rule to mark cache_hit packets coming from the squid and via queue tree to deliver cached contents to client at lan speed, but in CCR, its not working.

Can any one help in this regard?
by cicserver
Thu Jun 13, 2013 1:08 pm
Forum: The User Manager
Topic: howto make HotSpot and User Manager on the same router
Replies: 3
Views: 6096

Re: howto make HotSpot and User Manager on the same router

I don't know much about hotspot, but recently I configured pppoe server with user manager on same mikrotik box. I followed below guide. http://aacable.wordpress.com/2011/08/09/mikrotik-pppoe-server-with-user-manager-pre-paid-billing-system/ http://www.wifitech.com.pk/mikrotik-user-manager-prepaid-bi...
by cicserver
Wed Jun 05, 2013 7:03 am
Forum: Beginner Basics
Topic: Memory Limit?
Replies: 1
Views: 472

Memory Limit?

What is the maximum memory limitation in x86 versions and routerboard versions?
by cicserver
Tue May 28, 2013 9:43 am
Forum: General
Topic: PCC with incoming VPN from intrenet
Replies: 1
Views: 599

PCC with incoming VPN from intrenet

I have following scenario. Internet >> >> Mikrotik VPN SERVER with PCC (2 WANs) << >> Office Network I want to connect to my network from home using VPN. but it does not work. If I disable PCC , the vpn connect fine from my home pc. What need to be done? Can any one please guide or post some example...
by cicserver
Mon May 13, 2013 11:12 am
Forum: Beginner Basics
Topic: Port Forward not working with PCC Load Balancing
Replies: 5
Views: 2983

Re: Port Forward not working with PCC Load Balancing

I am also using port forwarding with PCC and it works without any difficulty, I have dual wan PCC setup. its something like below . . . DSL1 | | >>>> RB750 as PCC >>>> RB450G as pppoe server >>> Users DSL2 | I wanted to access RB450g Web server (which is running on port 1234) First I created port fo...
by cicserver
Thu Apr 11, 2013 2:04 pm
Forum: General
Topic: PCC failover question
Replies: 1
Views: 413

PCC failover question

I have configured PCC to load balance two wan connections and its working fine. When WAN-1 failed, all load goes to WAN-2 , but when WAN-1 comes back, WAN-2 load doesn't shift back to WAN-1 . Only new connections get load balanced across both WAN's. Is there any way that after wan1 recovery, existin...
by cicserver
Tue Apr 02, 2013 2:03 pm
Forum: Beginner Basics
Topic: Mikrotik RB vs Cisco ASA
Replies: 3
Views: 4373

Re: Mikrotik RB vs Cisco ASA

Ok can you please guide me how I will configure /29 public pool on mikrotik? as currently the fiber (via media converter) connects to Ethernet 0 and lan is connected with ethernet 1 How I will od it in mikrotik? which interface and what ip should I confiure on mikrotik rb? sorry being novoice, but I...
by cicserver
Tue Apr 02, 2013 1:36 pm
Forum: Beginner Basics
Topic: Mikrotik RB vs Cisco ASA
Replies: 3
Views: 4373

Mikrotik RB vs Cisco ASA

Currently we are using cisco ASA firewall in our network. It was configured by an Cisco guy. It have /29 pool configured on it. it is currently doing port forward for mail traffic / web portal cameras etc via public ips. for example 1.1.1.1 public mail traffic is routed to internal mail server, and ...
by cicserver
Mon Mar 18, 2013 1:33 pm
Forum: Forwarding Protocols
Topic: Port forward with Target Server Status check
Replies: 2
Views: 1061

Re: Port forward with Target Server Status check

Is there any possibility with the CISCO ASA ?
by cicserver
Mon Mar 18, 2013 1:13 pm
Forum: Forwarding Protocols
Topic: Port forward with Target Server Status check
Replies: 2
Views: 1061

Port forward with Target Server Status check

Hello all, Currently I am using Cisco ASA firewall in my organization. I am using port forwarding smtp / pop3 TCP port 25/110 traffic from Cisco ASA to my internal mail server name mail01 . Now I have added another server for mail server clustering name mail02 . I want that if m ail01 pop3/smtp serv...
by cicserver
Fri Jan 11, 2013 7:10 am
Forum: Virtualization
Topic: MT 5.20 High CPU utilization on ESXi 5.x
Replies: 2
Views: 3549

MT 5.20 High CPU utilization on ESXi 5.x

I have installed Routeros 5.20 on Virtual server (Esxi 5.x with good hardware). Problem is that CPU utilization is high most of the time, at night it shoots upto 90-100 % with only 50-60 pppoe sessions. No extra firewall or heavy rules are apllied, just a plain setup. When I check the same settings ...
by cicserver
Tue Nov 20, 2012 8:25 am
Forum: General
Topic: Hotspot User Bandwidth change on the FLY not wrking [Solved
Replies: 3
Views: 895

Re: Hotspot User Bandwidth change on the FLY not working

never mind, I solved it using aacable guide.

Thank you