MikroTik

szastan

Feel free to suggest other protocols and features that should be supported.

would be awesome if you could include S3-compatible client (linux s3cmd maybe?) for auto backup with versioning and recovery

szastan

bumping up, can someone check please? For now I don't have clue if this is problem in my config or ROSv7 bug. Ticket is already submitted but no response yet.

szastan

Hi all

did anybody manage to run hotspot on ROSv7? I'm struggling to make it work with same config as on ROSv6 but despite the firewall filter and nat rules being correctly created I'm not pushed to login page. Can anyone check on that?

szastan

Hey MikroTik,

did you consider adding LTE modem and SIM slot to one of your business/home router lines? It would be great as all in one solution and would solve many compatibility issues with modems.

szastan

if set how you write, should /ip/settings/arp-timeout be equal to ip/dhcp-server/leases/lease-time or is dhcp-server setting proper arp timeout into router? ARP timeout is the same as the lease expiration timeout in this case. Thank you for clarifying this. One last question, maybe you know this to...

szastan

If you enabled this option, and set the interface ARP setting to "reply-only", it will mean that only DHCP clients will be able to access your network, statically configured IP addresses will not be allowed, except if the admin adds their MAC address to the ARP menu if set how you write, ...

szastan

Hex should be written in following format 0xFFFFFF /ipv6 dhcp-server binding> add server=aa iaid=1 duid="0xffffff" Hi, if you require this format in DHCPv6 server, it would be great if you also provide it in DHCPv6 client, next to full DUID. Also, as you require IAID, there should be prov...

szastan

Update from 5.26 to 6.24 loses the wireless settings in Omnitik / SXT. AGAIN! like older v6.xx versions... Please ... do some minimal testing .... I update version because I am bound by problems with nv2 ... maybe a good idea to freeze a version and not develop more new functions (only fix bugs) Pl...

szastan

One thing that made me unsuspicious was fact that every other CCR I have in network works with no issues (at least hardware part). What irritates me most is that I can see that people had exact same issues as far as in August, yet Mikrotik didn't withdraw this model (or send any announcment about br...

szastan

Hi everybody, just wanted to warn you from buying device from topic. Just installed one on wednesday. After one day of work, device is dead. No reaction to providing power, in either of two sockets, device is dead. During it's short life, device was instantly putting it's only connected RJ45 interfa...

szastan

Glad to hear I made right choice :) but I'm experiencing different problem now, that is drops in multicast vlan. They are shown on graphs below (Straty), second graph is showing out of order packets (OOO). Does anyone have experience with such triple play setup? There aren't many drops, but they can...

szastan

I have experienced this issue on a few models of RouterBoard and it is has always been related to the L2 MTU in the path not being high enough.

Looks like that was the problem, thanks for the prompt

szastan

So, tell me somebody please, should PIM works on CCR, or it will be better to buy DGS-3620 (it works fine with it)? I have PIM on DGS-3627, the model before 3620 series, which is maintaining IPTV vlan for about 100 STB's and two other ISPs with about 500 STBs each, TV is working smoothly. I'll say ...

szastan

I used more than one area for learning pursposes. Also tried backbone area, and the same happened, couldn't reach router with LDP interface enabled through www and partially telnet, with ssh everything was fine. The rest of config was as you wrote (just different subnets). Funny is that this problem...

szastan

Hello, I'm trying to prepare for network migration from raw L2 to L3 using VPLS. I set up two CCR's, consulting with http://wiki.mikrotik.com/wiki/Manual:MPLSVPLS . Tunnels are connecting correctly, I can ping everything, but as soon as I add LDP interface between R1 and R2, I cannot access R2 via w...

szastan

BGP option like Juniper " advertise-inactive ". At the moment it is not possible to advertise learned BGP routes to other BGP neighbors if that particular route is not in the active routing table because it is overriden by OSPF with better administrative distance. Other bgp impementations...

szastan

assuming your routers are within one ASN, did you check route reflection on their peering session on both routers? Also, did you enable IGP protocol such as OSPF?

szastan

I'm also waiting for BGP routing functions to work on every core. Had to reboot router few times already because of stuck routes / long table rebuilding time. I even started searching if anyone already put clean Linux on CCR...

szastan

sure, use OSPF, redistribute what you need on 'core', and routes will propagate to your clients

szastan

Is anyone successfully monitoring a CCR with SNMP ?

We have been holding back on this on our production units as I recall there were wide spread issues with this causing performance issues previously.

I'm gathering all interfaces bps, cpu, ram usage without any performance degradation

szastan

Hello I have the same performance problem. Two BGP connection and a very long time rebuilding routing configuration. One of the core loaded to 100 percent. There is a some solution? currently I'm using version 6.4 of the software. Unfortunately, yes. In my case (config above didn't change, only tra...

szastan

the version 6.6 not working vlan on the bridge . if disable enable starts to work. After rebooting everything is repeated the same thing happened to me today on RB2011. This is unacceptable. I was trying to move to RB as device for business client, but I can't take the risk of loosing my clients. M...

szastan

do you redistribute default route in your OSPF instance?

Redistribute Default Route = always (as type 1)

szastan

I don't see any peer configuration on Mikrotik

you have to configure at least one peer so BGP can do anything

szastan

szastan, thank you for reply! no problem Does one core full utilization makes influence on traffic flow? No, this is not a problem since traffic is ~equally divided between cores What is the latency to nexthop via your bgp router? It depends as some of nexthops are in same city, some are in totally...

szastan

I'll give my vote, this is most common used tool by me, and having it on CCR sitting in core would be more than appreciated.

szastan

Do you also experience one core almost always at 100% load? How much does it take a route state-change to be applied? On my CCR (3 IPv4 full views and 3 IPv6 full views) it takes almost 20 minutes. Yes, in fact above CPU graph is showing cores reaching 80% in a daily view, here they are averaged. F...

szastan

So far everything works as intended, made during this time few reboots at the beginning, at the moment CCR uptime is almost 11 days. Below are some screenshots: Zrzut ekranu 2013-07-1 o 12.47.53.png Zrzut ekranu 2013-07-1 o 12.47.23.png Zrzut ekranu 2013-07-1 o 12.47.00.png 3 IPv4 and 3 IPv6 full ta...

szastan

what? ibgp <> ospf.

quess he meant IGP

OSPF and OSPFv3 handle IPv4 and IPv6 so whats the comparison here?

with IS-IS you have one protocol daemon instead of two, the less complicity the better

szastan

hey, try to set local preference in your out filters (higher is preferable) and see if your outgoing traffic pass with primary connection

szastan

Hi, I've managed to set up transit of few ASN's. Keeping long story short: - set up peering session with your ISP / out routing filters (in my case I filter only by my and my client prefixes), deny everything else - set up peering session with ASN you have to set up transit as above / in filter pref...

szastan

Hello guys! I just wonder if it's possible to run 2xBGP Full View with 100 Mbit each on RB1100AHx2? I have routing and NAT. For current 100M load cpu utilization is about 30%. Does full view increase CPU utilization and make impact for latency? I need time until CCR became suitable for BGP producti...

szastan

Hello, yesterday I received first CCR-1016-12G, and I've instantly saw one bug. Unit was configured with BGP (iBGP + OSPF) full mesh, two interfaces (eth1, eth2) connected. After performing reboot, unit is constantly rebooting, what I can see is that interfaces on switch it's connected to are turnin...

szastan

Thank you for this clarification. Do you have any possible term when you want to implement new version of SMB ?

szastan

Hello, I'm trying to connect to my USB drive connected to RB 751 using SMB. From Windows everything works fine, but trying to connect from Mac (OSX 10.8.2) I get info: Server version you are trying to connect is not supported, but then connecting to Windows PC, everything works fine. Is this possibl...

Search found 35 matches

Re: 7.8beta2 adds new package ROSE-storage

Re: Hotspot

Hotspot

RB2011 / 3011 + LTE modem/SIM slot

Re: Add ARP for leases, what does it do?

Re: Add ARP for leases, what does it do?

Re: DUID for IPV6 Server needed

Re: 6.24 released

Re: Beware of CCR1009-8G-1S-1S+

Beware of CCR1009-8G-1S-1S+

Re: MPLS/VPLS with OSPF problem

Re: MPLS/VPLS with OSPF problem

Re: Multicast routing

Re: MPLS/VPLS with OSPF problem

MPLS/VPLS with OSPF problem

Re: Feature request for v7.x BGP advertise-inactive

Re: BGP is working - can't ping out

Re: Routing Engine Multicore for BGP

Re: Routing table distribution between clients

Re: CLOUD CORE ROUTER

Re: CCR - BGP performance

Re: RouterOS v6.6 released

Re: CCR BGP Full Route Problem

Re: BGP problems

Re: CCR - BGP performance

Re: Feature Request: MTR

Re: CCR - BGP performance

Re: CCR - BGP performance

Re: IS-IS

Re: BGP with 2 Peer

Re: ASN transit

Re: CCR - BGP performance

Re: CLOUD CORE ROUTER

Re: RB 751G-2HnD, SMB

RB 751G-2HnD, SMB