MikroTik

Bongo

Also I think the cpu start to be more utilised ? in profile the most cpu usage is "unclasified" is someone notice something simillar with 7.13 ? Yes, on a few Hex models, and RB5009UG, CPU is frozen on 350Mhz and doesnt change, i have also netinstalled it back with factory setting to test...

Bongo

hi, if im correct, you only want your router/ip to update to your host? if so, easiest is edit htaccess and deny all & allow yourself only ( your internet IP only ) and yes it will accept username & password also ####################### order deny,allow deny from all allow from <your ip> ###...

Bongo

hi export file=backup.rsc then on the new device reset it to factory with no default config ***Important: Use notepad++ and edit your backup and make sure the ports for example are labeled exactly the same ( example: ether1 )*** then use netinstall or winbox and attach the backup file and restore th...

Bongo

hi...your first router i will remove, then configure the RB4011iGS for everything
set lan in bridge, dhcp, nat and port forward the nas for public & local access

Bongo

Port forwarding Nat Rule chain = dstnat action = device internal port protocol = tcp in-interface = internet gateway dst-port = device external port you need to specify a port for your server or device and its ip and point it to that port and gateway on the router also 8.8.8.8 is google dns, use a d...

Bongo

Oops wrong snapshot pic
the correct one is below
it need to dial out both adsl internet & l2tp from mikrotik and set the l2tp as default route

the isp gives a adsl account and a l2tp ( static ip )

Bongo

best is create a queue & mangle rule & set the queue to its lowest you can also set limited packet size and sync flood eg: Mangle: action=mark-connection chain=prerouting comment="p2p mark" \ new-connection-mark=p2p_conn p2p=all-p2p action=mark-packet chain=prerouting connection-ma...

Bongo

if your mikrotik is connected to adsl with static ip then: 1) block all ports of your modem for safety except your mikrotik thats fully open 2) in mikrotik block all ports except what you need open ( winbox, telnet, etc...) 2) then open the vpn port for telnet in mikrotik with its ip ( port foward )...

Bongo

Does not matter if they will still exist or not in a few years time, its more on how long its gana last you, depending on your load of work & if something happens to it. you can use any router depending on your load & traffic the router has to do for it to work smooth & as long as both e...

Bongo

i had similar problem & solved it, but you need to give more info ( your setup & configuration )

Bongo

I would like to see support for l2tp static ip pppoe dialout with tunnel & ipsec, as mikrotik dont currently support it
the attached pic is from a billion 7402gx router that does support l2tp

Bongo

Hi can you add in new release v7 support for pppoe dialout adsl/vdsl static ip connection L2tp Server IP: 10.10.10.10/32 Username: Your DSL Username Password: Your DSL Password Authentication Type: PAP/CHAP/MSCHAP Tunnel Authentication: Yes/No Secret: 123456 Active as Default Route: Yes IPSec: Yes/No

Bongo

Use MS Frontpage its the easiest, you can drag & drop or do what you want to with your page till you happy

Bongo

use something nice like a R433UAH or RB600 for wireless if going outdoors, if indoors just use wireless card on x86
use a x86 pc for management control and for cable access & a x86 for proxy
extras are network auto switches,cable,power etc...
thats all

Bongo

Check your STORE option under system

should show usermanager active

if not set it active

Bongo

hi i need some help with proxy i want to setup squid but want it to do the same as mikrotik webproxy in mikrotk theres src proxy ip + port & parent ip + port where i want to use my isp's proxy as it speeds my network up alot as the src proxy and use my squid server as parent proxy of wich my cli...

Bongo

Simple:

servers: wan ip
allow-remote-requests: yes
max-udp-packet-size: 512
cache-size: 2048K
cache-max-ttl: 1w
cache-used: 44KiB

Masquerade WAN Network - chain=srcnat action=masquerade

Route wan ip - ADC 192.168.1.0/24 192.168.1.2 WAN

Bongo

check your service ports , i had same problem

eg: web access to router/hotspot

10.5.50.1:8081
www.hotspot.com:8081

also check firewall access rules

Bongo

My problems i havent reported cors most i sorted myself out, but for real try to sort them out eg: queue problems clash with new versions , not stable like in hotspot userman problems NB* pppoe usage limits dont work perfect like hotspot hotspot is the only thing that works smooth with queue & b...

Bongo

YES I AGREE..........!

fix the problems that's never been fixed

Bongo

Hi I would like to know if I downgrade from 5.10 to 4.17, do I still need to update the firmware also...(downgrading firmware)

Bongo

hi hope im on the right side here, im newbie but know abit of mikrotik, ive setup my router "433uah" adsl & "750g" my adsl is 1024k/512k my adsl links to ether2 on 433uah with static ip my poe & ether1 links to my 750g with static ip 433uah acts as firewall,mangle, routin...

Bongo

hi, im newbie in mikrotik but know most of basics etc... Reason for me posting this is i need some help just by someone who knows more than me i have a 433uah and a 750g router i need to connect 750g to my 433uah via lan and the 750g to work with all my rules eg: firewalll mangle proxy etc... thats ...

Bongo

im running a 4MB unshaped dsl line, but my isp has restrictions for example 1st & 2nd priority....meaning if im using torrent i get full speed unshaped but the rest on my network get 50% of the actual line speed thats why i want to set everything evenly..... my hotspot clients i just want to giv...

Bongo

Thanks but im still abit confuse...below is my details of hotspot if can just tell me where to make changes eg: 128k up/384k down 192k up/512k down to limit clients to a fix upload & download rate HOTPOT SERVER PROFILE: name="hsprof1" hotspot-address=172.16.69.1 dns-name="www.hots...

Bongo

Hi i need help with setting up bandwidth & queue. My router is 433uah L5 licence my firewall & basics are already setup & hotspots and working fine I just need help in setting the up & down speeds for each client on hotspot as im confuse with all the different limit options eg: under...

Bongo

Hi can you mail me the script please!!! johan1786@gmail.com

Thanks...!

Bongo

i use googles dns

ip/dns

8.8.8.8
8.8.4.4

or punch it in on your adsl router & in ip/dns in winbox user your adsl routers ip

Bongo

Hi MCT thanks for replying to virus question i asked i want to ask if you could help me out with some stuff i have 433uah bored, running adsl, my pc, my proxy, etc..... my proble is my proxy, firewall, mangle, queue rules etc... does not follow on my clients pc's all rules ive set out falls on my ma...

Bongo

easy just setup basic network settings for you & dsl on lan1
setup hotspot or pppoe for the rest thats it
if you stil want to set usage limits just add it by

if you dont no how just ask will direct you step by step

Bongo

hi like your rule for viruses just want to know, do i still have to keep my old viruses rule as shown below in blue or do i just leave as is & just add your rule by as shown in red add action=drop chain=virus comment="Drop Blaster Worm" disabled=no dst-port=135-139 protocol=tcp add act...

Bongo

hi , can anybody help me as im a begginner, i got some basic network & mikrotik skills i already setup a pppoe server , ip-pool, firewall, mangle etc... pppoe server works fine i just need advise on what extras are there or changes i can do to make my network more secure protecting my network &a...

Bongo

i came right with it:D exept 1 tiny problem is my client option on router where you set username & password...... :( it conflicts with usermanager...example if i setup username & password on router then it work but if i setup on usermanager it dont....... :? also another problem is user band...

Bongo

Sorry to reply again it did not work if its possible to direct me step by step in detail

Shukran

Bongo

Shukran ..........!

Bongo

im running a standard dual core p4 E5200 cpu, 2gb ram ddr2 800, 250gb sata with two gb-lan cards ( input/output)

running pppoe server , firewall, queue, L7

runs smooth, got +/- 250 clients

Bongo

i recommend full bandwith for your clients, limit your ethernet lan your clients are on eg:( 128k/128k) and create a basic queue for downloads of file types :

eg:

*.mp3
*.zip
*.rar
*.iso

what it is, is your clients will get full bandwith you set for them but drops when downloading

Bongo

hi, im newbie, i need help setting up PPPoe server... i want my client Pc's to connectvia PPPoE,Queue,Bandwith limit, & setup Local & internation dsl im running a 433uah routerboard .................................................................................................................

Search found 38 matches

Re: v7.13 [stable] is released!

Re: .htaccess input for DynDNS Update

Re: RSC backup restore failing on same model hardware and routerOS version

Re: how to connect NAS behing two routers

Re: Portforwarding Site2Site VPN

Re: Request for RouterOS v6 & 7

Re: Need a better method of stopping P2P on my network

Re: Cant telnet to remote device but I can ping it through P

Re: Routerboard Life expectancy

Re: Recommended Config for R52Hn 802.11 b/g/n AP

Request for RouterOS v6 & 7

Re: 6.9 released!

Re: Hotspot Login Page

Re: Please help me

Re: Usermanager on Version 5.11

Re: Web Proxy

Re: how i can do this plzz

Re: Need Help! PCC+Hotspot+LAN IP Network+PPPOE Server

Re: Serious request for the new year.....

Re: Serious request for the new year.....

Re: 750GL Downgrade problem

Re: share bandwidth among users

Re: how to disconnect pppoe link to isp

Re: Urgent Help With Queue & Bandwidth

Re: Urgent Help With Queue & Bandwidth

Urgent Help With Queue & Bandwidth

Re: How to convert a MT box in an Anti Spam server with v2.9

Re: Problem with ISP-DNS-Servers

Re: Virus Ports Block

Re: Firewall & Proxy by Profile

Re: Virus Ports Block

Re: PPPoE network design

Re: Help withh PPPoE

Re: Help withh PPPoE

Re: Help withh PPPoE

Re: Layer 7 and Qos, server HW requirements

Re: Queue Types What is the difference? and Which is better

Help withh PPPoE