Generating certificates in ROS v6.23 still fails for me.... Following the guides: http://wiki.mikrotik.com/wiki/Manual:Create_Certificates#Generate_certificates_on_RouterOS I am trying to get MikroTik OVPN server/client to work, I've done it before but now it seems to be broken. On the Client side, ...

Hi everyone. I've been trying to figure out what approach I should take to have a loadbalance and failover between MT-A and MT-B. Assume both links are wireless PTP (none is mikrotik), one is 50Mbps and the other 280Mbps - so what I would love to be able to distribute the traffic over both links, wh...

@trn76: using the same tutorial I have discovered that the access ports are still receiving tagged traffic from the trunk port. You can verify that for yourself by running a tcpdump -n e i enX on the "access" port, you will be able to see the VLAN IDs affected as well. I think that the ap...

If I follow the example here: http://wiki.mikrotik.com/wiki/Manual:CRS_examples (Port Based VLAN) and trunk the two CRS, then on VLAN400 i connect a computer with WinBox, and after a while I can see the RB750 pop up in WinBox... - I cannot connect, but I can see it. If I disconnect the trunk, and co...

Did you reset to defaults after upgrade to 6.10 or 6.11? ... -Eric upgraded firmware, and i always "system reset-configuration no-default=yes" so by following: http://wiki.mikrotik.com/wiki/Manual:CRS_examples Port Based VLAN, If I connect to eth6 using wireshark, and connect another comp...

Oh thank God it's not only me seeing that "leak"! Using CRS ROS 6.11 - I'm not able to ping, but I can gladly see other MT on other VLAN's with WinBox, also sniffing traffic with Wireshark and I see it leaks traffic. Seriously.... fucking great! ... I now have (yet again) 8 CRS that are us...

Allright... Thanks everyone - and especially thanks to efaden for helping me out with this. It's almost a shame that MikroTik does not support this...and confusing to say the least! :? I've called the provider and asked for L2TP, IPIP or GRE, they gonne call me back and hopefully they can provide th...

So I am trying to setup an IPSec connection to a third party that is providing secure access to some networks. The network is setup as follows: Local MikroTik: WAN IP - 1.1.1.1/24 Local Side of IPSec - 192.168.1.1/24 LAN - 172.16.0.1/24 Remote IPSec Concentrator WAN IP - 2.2.2.2/24 Remote Side of IP...

I can help. Drop me an email.

Check you email

I need help setting up an IPSec Tunnel, where I've got all info regarding setting it up. There are several routes(IP addresses) that need to go throu the tunnel, the rest shall use the default gateway. I've done 90% of the job, what is missing is last part of IPSec Phase2 - I can see both Installed ...

Hi. This is just a humble request to the MikroTik team, to please consider making the Script List editor font monospaced in WinBox. It's a bitch :? to read and edit in the script-editor (and yeah I use an external editor too). I don't think I have to explain why any further... Thank you, see you at ...

Hi everyone. I've been working with ROS for a year now, and love it...and still learn new things almost every day. But one issue I still haven't quite grasped yet is SNMP and oid in ROS.... Is it possible to make custom oid so I can pull those values? If not, any other ideas how I can get custom val...

Hi everyone, I got the same problem occuring several places. RB1100 v5.6 firm 2.30 was flipping ether1-5. We tried various auto-negotiate on/off and speed settings, but we didnt notice any difference(no, we did not try 10Mbps, as its just wont carry the traffic). Next, we replaced the RB1100 with a ...