MikroTik

bulat

Thank you for helping me to correct my firewall rules. I hope they sufficient for soho use.

I have one question about hardware. I use powerbox pro. Is it normal that system health showing temperature: 77 С?

bulat

Hello,
I have PowerBox Pro, when I check system health in winbox.
It shows voltage: 48.1 V and temperature 77 C.(cpu 3%)
77 C seems to be too high for idle operation.
Is this normal?

bulat

I am very new to networking(mikrotik), I don't really understand what I am doing. mostly copy and paste from the internet and this forum. Could you please edit my firewall rules or maybe suggest better ones. /ip firewall filter add action=fasttrack-connection chain=forward connection-state=\ establi...

bulat

Please help me to setup my home router. I have 500/500 connection. I use following firewall rules. ip firewall filter add action=accept chain=forward connection-state=established add action=accept chain=input connection-state=established add action=accept chain=forward connection-state=related add a...

bulat

Any luck ?
i have the same problem ...

I have sent it to my reseller.
Haven't heard from them yet.

bulat

just like it was always said, RB751G will come a few months after RB751U

I know that you don't have an exact release date, but do you mean it will be available in 2-3 or 5-8 month???

bulat

So, what is the best hardware for load balancing(PCC) job!

bulat

I want to meet you, If you are capable of getting a 100 Mb line with 2x20Mb and 1x30 Mb. Amazing. Are you insulting me? Not very nice. One of my ISP provides 30 Mbps during the day and 100Mbps at night. To make the load balancing, you can try the Chupaka's style. Can you give me a link? It works fi...

bulat

Hello everyone, I have a few questions about load balancing. 1) Is the PCC load balancing CPU intensive? What are the minimum hardware I need to balance and 2x20mbps 1x30mbps (100 Mbps at night) the connection? RB750GL is enough to make this work, or should I get a different RouterBOARD (e.g. rb450g...

bulat

the problem you are facing is hat you have to create pptp tunnel to your ISP. That is odd to say the least as they usually provide PPPoE tunnel, that is assigned on the interface (or inerfaces in MLPPP case) while PPTP uses IP address to connect. PPPoE is chosen since you do not need ethernet to be...

bulat

Can someone at least tell me if this is possible?
I could not find a way to specify the interface for the PPTP client.

bulat

Look - honest opinion here. Just mine, no one else's. I sincerely hope someone else picks you up and sees it through. You seem like a nice guy. You're asking for way too much. You want people to explain things to you bit by bit. Personally I don't do that. I'll only help people that have specific q...

bulat

It would be very nice to hear some thoughts from Mikrotik and the forum gurus.

bulat

How often does you gateway change?

I'm not sure about that. In any case, I have two uplink from the same ISP.

bulat

I have 3 WAN Ethernet ports and 3 PPTP clients, how PPTP client interface connect to the correct WAN-interface? How to configure PPTP-client to connect to a specific Ethernet port? PPTP-Client uses an address to connect back to the PPTP-Server. You could set in your routes to route traffic to a cer...

bulat

Hi, I think it does not matter what type of Connection to ISP you have... Follow this instractions: http://wiki.mikrotik.com/wiki/Manual:PCC Just modify them acording to your PPTP Client interfaces.. Remeber to Mark packets.. I have done such setups on DSL and fiber connections and it works like a ...

bulat

but still, that will be one unit, that mostly sits idle, when at the same time you probably have 5 other cellphones with 2000W each, your neighbor phones, radio phones, TV transmissions etc. oh.... that's **it.. i should order a good shield material to well covered my whole body.. any introduce? 8)...

bulat

anybody?

bulat

your mobile phone transmit power is much much higher. worry about that first. The radio waves emitted by a GSM handset can have a peak power of 2 watts, and a US analogue phone had a maximum transmit power of 3.6 watts. wireless router in your home usually trasmits at 200-300mW (up to 0.3W at it's ...

bulat

You can look through firewall examples and adopt good ideas.

Can you help me with pptp-cleint configuration.

Can you look at my thread http://forum.mikrotik.com/viewtopic.php?f=2&t=55182.

I couldn't find any example.

bulat

I was wondering about the impact of powerful wireless router on health?
I have a big apartment, one of my cat 5e cable is in the room of my son. I thought that two wireless AP can cover my apartment. But I am afraid that I might be dangerous to the health of my child.

What do you think?

bulat

un-bricking usually is done by resetting configuration or trying to access router through mac-telnet/mac-winbox or serial console (if router has one and board has console enabled on serial port). Other method - use netinstall tool to reinstall your router. Could you tell me more about mac-telnet. M...

bulat

Hello, I am trying to configure my router with Multi WAN PCC Load Balancing . My ISP connections requires PPTP authentication. I know how to configure the PPTP-client connection in Winbox, but I do not know how to do this for three WAN connections. How to link wan1-PPTP-client to WAN1 and how to con...

bulat

So I assume that my RB just passed away.

bulat

Net install to 5.7. Start net install on your PC, and hold the button on 750 while plugging it into power until the light goes off, then release the button and it will start the process. http://www.routerboard.com/pricelist/download_file.php?file_id=191 How long do I have to hold it? I tried holdin...

bulat

Net install to 5.7. Start net install on your PC, and hold the button on 750 while plugging it into power until the light goes off, then release the button and it will start the process. http://www.routerboard.com/pricelist/download_file.php?file_id=191 How long do I have to hold it? I tried holdin...

bulat

Fewi's setup guide linked above is very extensive and effectively a CLI tutorial. There are also quite a number of other setup guides and even wizard type setup scripts on the wiki. For example: http://wiki.mikrotik.com/wiki/A_script_to_set_up_WAN/LAN/WLAN_to_get_you_started Thank you, but first i ...

bulat

It's in your other thread. It's part of the tutorial I posted. That's pretty much all I can contribute to your request for detailed explanations. Are you talking about this post? http://wiki.mikrotik.com/wiki/How_to_configure_a_home_router And then this covers load balancing for multi-WAN: http://w...

bulat

I have updated RB750Gl to 5.7 and have managed to update firmware to 2.36. I only configured interfaces and setup PPTP client to connect to my ISP. My router become unresponsive, after that I checked cpu http://i53.tinypic.com/2v8n34i.jpg so i have decided to downgrade again, after few attemts RB st...

bulat

[removing post]

I didn't have time to copy your firewall example. Could you post it again?

bulat

Actually I'm far from setting firewall rules.

Could you explain how to link WAN1-pptp interface to WAN1 and WAN2-potp to WAN2 so on.

How should I configure NAT?

What other things should I think about?

bulat

yes, if ports are switched, then only master port have configuration in RouterOS. SO if you set ether2 master-port=ether1 and assign IP address on ether1, then both ports will have that. Traffic from either of ports will count as ether1 traffic (f that goes through the router or to router) What abo...

bulat

in your case, if you set for ether2 attribute master-port=ether1 then these 2 ports will be swtiched. Traffic that go between the ports will be be visible by the router. So, if I leave the LAN1 in configuration example below, will it work for both LAN ports? In the example below, only one LAN port ...

bulat

under '/interface ethernet' you can set one port as salve port of other one by setting master-port. when you fill master-port field you will make this port a slave port of one you set in master-port field. you will only see traffic in router that is going through the router not through switched por...

bulat

yes. that is correct. That is example you should follow. However you will get near maximum output through these lines. As max is only available if you are using bonding, but for that you have to control both ends of the link. You mean the other end of my internet line (end of the cable which goes t...

bulat

Other end is, if at all that can be called that way - is PPPoE server for LAN1 and static/dynamic config for LAN2 that should be straight forward from manual. Why do I need PPPoE-server? Can you tell me how to make eth1-master, eth2-slave switch? I know it should be easy, but then you do not know t...

bulat

non-bonded - means you have several links but they work as separate connections. And all the balancing is done on one router. PCC you need because of IPv4 NAT problem - to make connections persist on the link they where created on. Very important for ssl/tls sessions. You can look up one end of the...

bulat

Hello, everyone! I will pay (with help of PayPal) $50 to the person who firsts will solve my problem and explained how s/he has done it. If everything will work as it should we shall upload this guide to Mikrotik wiki. I have RB750GL router, but I don’t know much about networking. I would like to ut...

bulat

I also had this problem on my RB750GL. Then I uploaded 5.7 OS via FTP to router, and type into terminal

/system routerboard settings set force-backup-booter=no

/system routerboard upgrade

Then reboot

everything updated nicely

bulat

CPU load?.. I already went back to v5.2. I have used ftp method to update and probably it does work properly. As my firmware didn't change. I will update again but with terminal method. [admin@MikroTik] > system routerboard print routerboard: yes model: 750GL serial-number: xxxxxxxxx current-firmwa...

bulat

I upgraded my new RB750GL to v5.7 and it seems less stable now :( . what does it mean "less stable"? are you serious? After update I have configured interfaces and dhcp client for WAN and dhcp server for LAN, after that my rb750gl was constantly rebooting itself. Boot time has increased a...

bulat

I upgraded my new RB750GL to v5.7 and it seems less stable now

.
Where can I download the old version? I think it was shipped with RouterOS V.5.2.

bulat

English is not my native language, so please be patient with me. It would be nice if someone could guide me through the installation. I am willing to reward you through Paypal :D . Step-1 I'll reset the router configuration. Then rename the interfaces, Eth1 to LAN1, Eth2 to LAN2, Eth3 to WAN1, Eth4 ...

bulat

Hello, I'm just a simple home user, and I do not know much about networking. However, I am willing to learn. I bought RB750GL, but I do not know what to do and where to start. My goal is to increase the overall speed of the Internet. Can someone point in the right direction, or be so kind and write ...

Search found 44 matches