Community discussions

Search found 75 matches

by tamilmaran
Sat May 07, 2016 9:41 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 64680

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

why wireless FP is discontinued..?
any specific reason
by tamilmaran
Thu Oct 15, 2015 6:43 pm
Forum: General
Topic: How to limit PPPoE connection request attack?
Replies: 34
Views: 9749

Re: How to limit PPPoE connection request attack?

Whatever the spec you had in mikrotik... when PPPOE request attack happen from multiple devices , it definitely slow the authentication for all other PPPOE clients . :( even you got less than 20% of cpu usage. :? ISP People who told all are fine in Mikrotik PPPOE server means the reason behind it is...
by tamilmaran
Wed Mar 25, 2015 8:52 am
Forum: Wireless Networking
Topic: SXT lite or SXT G-2hnd for 6-8 kms p2p
Replies: 16
Views: 4621

Re: SXT lite or SXT G-2hnd for 6-8 kms p2p

hi normis
i wana crete a p2p link with sextant 5hpnd over 8.5 Klm
is it posible to get 100m tx rx trafic load ( mean browsing or downloading load a to z)
plz repply me
no way...
by tamilmaran
Tue Sep 23, 2014 1:26 pm
Forum: General
Topic: Multiple PPPoE Client for DSL over vLAN on single modem
Replies: 2
Views: 1210

Re: Multiple PPPoE Client for DSL over vLAN on single modem

is it is possible with vlan
by tamilmaran
Tue Sep 23, 2014 8:07 am
Forum: General
Topic: PPPoE Multiple Users - Same Mac Address
Replies: 12
Views: 4677

Re: PPPoE Multiple Users - Same Mac Address

that will definitely work, becuase for different mac address , but we are looking to add ppoe profile in router itself & deliver dhcp to clients of different ranges
by tamilmaran
Mon Sep 22, 2014 8:54 pm
Forum: General
Topic: PPPoE Multiple Users - Same Mac Address
Replies: 12
Views: 4677

Re: PPPoE Multiple Users - Same Mac Address

im also caught in same situation, I required to configure the Multiple PPOE connections on single wan link & Deliver the DHCP ip delivery to multiple users via different pools. I tried but even after i mark packet of source ip pool, i cant use more than one user at a same time , but at different tim...
by tamilmaran
Mon Sep 22, 2014 8:53 pm
Forum: The User Manager
Topic: Multiple PPPoE connections, one MAC address
Replies: 4
Views: 3236

Re: Multiple PPPoE connections, one MAC address

im also caught in same situation, I required to configure the Multiple PPOE connections on single wan link & Deliver the DHCP ip delivery to multiple users via different pools. I tried but even after i mark packet of source ip pool, i cant use more than one user at a same time , but at different tim...
by tamilmaran
Sun Aug 03, 2014 6:57 pm
Forum: Wireless Networking
Topic: SXT lite or SXT G-2hnd for 6-8 kms p2p
Replies: 16
Views: 4621

Re: SXT lite or SXT G-2hnd for 6-8 kms p2p

Upgrade your routeros to latest version & choose frequency= auto.
by tamilmaran
Thu Nov 21, 2013 4:36 pm
Forum: General
Topic: How to change proxy error page in 3.28?
Replies: 10
Views: 10076

Re: How to change proxy error page in 3.28?

I want to display only the image place in the web proxy folder named error.png alone. how could i do it. pls share the html code you can add CSS directly into HTML, using <style> tag inserting images: <div style="height: 24px; background: no-repeat url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAA...
by tamilmaran
Thu Nov 14, 2013 8:35 pm
Forum: Beginner Basics
Topic: RB 750U suppoted USB Drive Size
Replies: 6
Views: 3155

Re: RB 750U suppoted USB Drive Size

Usb 3.0 will support...?
by tamilmaran
Sun Sep 29, 2013 10:49 am
Forum: General
Topic: More information in wireless registration table?
Replies: 7
Views: 1789

Re: More information in wireless registration table?

how to get print of comments which i marked for wireless clients along with wireless signal & ccq
by tamilmaran
Thu Aug 15, 2013 5:24 am
Forum: Beginner Basics
Topic: what is best mikrotik router board that have hotspot facilty
Replies: 10
Views: 5651

Re: what is best mikrotik router board that have hotspot fac

ya i know it depends on hidden node issue & near n far effect. but when ever client get high latency. i don't see any big usage in cpu & mostly free ram is 16 mb n more. when compared to 411 ah , 433 ah is had extra ethernet port & ram. cpu are same as 411 ah. so there is no performance hike in 433a...
by tamilmaran
Wed Aug 14, 2013 3:48 pm
Forum: Beginner Basics
Topic: what is best mikrotik router board that have hotspot facilty
Replies: 10
Views: 5651

Re: what is best mikrotik router board that have hotspot fac

many guys told the performance depends on cpu speed instead of ram memory,
may i know which is powerful ap to run max no. of online clients with high latest & fastest cpu.
by tamilmaran
Wed Aug 14, 2013 7:57 am
Forum: Beginner Basics
Topic: what is best mikrotik router board that have hotspot facilty
Replies: 10
Views: 5651

Re: what is best mikrotik router board that have hotspot fac

suggest me best routerboard models for ap with 50 online client & 30 clients.
& what is the preferrable free ram usage for proper working as ap, right now im getting 47mb for 64 mb ram...
by tamilmaran
Wed Jul 24, 2013 7:38 am
Forum: General
Topic: mikrotik configuration manager
Replies: 4
Views: 1273

Re: mikrotik configuration manager

any update
by tamilmaran
Sun May 05, 2013 12:39 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136409

Re: Sample Installations - Sticky Please

Dbii boards are very sensitive to earthing issues. This is the F20 2.4GHz unit. Here you can see the Dbii board is earthed to the RB411, which is in turn earthed to the radio antenna. The radio antenna is then earthed to a copper water pipe via an earth strap. IMG_1316 (Medium).JPG IMG_1317 (Medium...
by tamilmaran
Sat Apr 27, 2013 11:03 pm
Forum: Wireless Networking
Topic: antenna tower
Replies: 12
Views: 2035

Re: antenna tower

I read his post, but there is no wirelles device stronger then grove (metal)

If you need single chain, you can use METAL GROOVE with sector antena
SAM_1971.JPG
how much distance you achieve, what cpe are you using..?
by tamilmaran
Sat Apr 27, 2013 10:59 pm
Forum: Wireless Networking
Topic: Omnitek with SXT
Replies: 11
Views: 1716

Re: Omnitek with SXT

Hi, I am not sure about your environment but in my environment i am running Omnitek with 5KM , 3KM , 1KM , 10KM also & all are working but CCQ for 1KM & 10KM ( Client side RB411AH with 25dbi Aentena) almost same not much diffidence I am not sure but i made some mistake in configuration. Can any one...
by tamilmaran
Sat Apr 27, 2013 10:44 pm
Forum: General
Topic: Webfig Enhancement
Replies: 6
Views: 1629

Re: Webfig Enhancement

it is pretty useful when maintain the access list by commenting the client names in comments field & monitor over registration table with inline comments
by tamilmaran
Sat Apr 27, 2013 10:40 pm
Forum: General
Topic: Webfig skins (tutorial)
Replies: 100
Views: 93336

Re: Webfig skins (tutorial)

me too need the option for add & remove columns.
Any plan for this in future...?
by tamilmaran
Fri Apr 26, 2013 6:01 am
Forum: Wireless Networking
Topic: SXT lite or SXT G-2hnd for 6-8 kms p2p
Replies: 16
Views: 4621

Re: SXT lite or SXT G-2hnd for 6-8 kms p2p

sxt lite only gave me 12 Mbps throughtput for 1.5 kms under signal -60.
i even tried with recommended config, in bridge & station bridge mode.
compare to airgrid m5 25 dbm gave me 80 Mbps throughput.
by tamilmaran
Fri Mar 08, 2013 7:45 pm
Forum: General
Topic: Feature Request - Centralised sync Acess list
Replies: 2
Views: 800

Feature Request - Centralised sync Acess list

add option to manage the access & connect list on group of router.
it is really good feature , we allow the specified mk router & maintain the access list via sync method, it is useful for roaming client.
consider it...
by tamilmaran
Tue Jan 15, 2013 8:46 pm
Forum: The Dude
Topic: Dude 3rc2 - Import Background Image Error - File Invalid
Replies: 17
Views: 7050

Re: Dude 3rc2 - Import Background Image Error - File Invalid

change the jpg file to png.
just change the extension , it works for me great..
by tamilmaran
Sun Dec 16, 2012 5:09 pm
Forum: Wireless Networking
Topic: Grounding Issue / Prevent Equipment Damaged from Lightning
Replies: 5
Views: 1981

Re: Grounding Issue / Prevent Equipment Damaged from Lightni

what you meant by outdoor & indoor poe connector..
by tamilmaran
Sat Nov 03, 2012 7:52 pm
Forum: General
Topic: [HELP] P2P Traffic Limiting
Replies: 4
Views: 1671

Re: [HELP] P2P Traffic Limiting

Well postrouting is going after prerouting, use prerouting chain. However if you are not familiar with chaings and mangle, one queue simple entry is enough, 'queue simple add target-address=x.x.x.x/xx p2p=all-p2p' and required limits. i searched over the forum nobody had proper solution to limit P2...
by tamilmaran
Wed Aug 15, 2012 9:53 pm
Forum: Scripting
Topic: how to limit 5-session(5-connection) for each client
Replies: 19
Views: 3999

Re: how to limit 5-session(5-connection) for each client

norack, what movie is your signature from :) ? I dont know, normis. I got that by randomly search the web. I admit it so distractive, lol. you could look at queues with burst for that - if user is downloading a lot, speed will be limited to some lower value, when just opening the pages customer wil...
by tamilmaran
Wed Aug 15, 2012 9:46 pm
Forum: RouterBOARD hardware
Topic: Rb411AH NIC Failure
Replies: 12
Views: 3631

Re: Rb411AH NIC Failure

You need to think about proper grounding for them in the future. Reset the configuration, upgrade MikroTik RouterOS to 4.5 and RouterBOARD firmware by /system routerboard upgrade and /system reboot. If it does not help, return boards to your supplier. So are you saying that Mikrotik will replace li...
by tamilmaran
Fri Aug 10, 2012 1:17 pm
Forum: Wireless Networking
Topic: Question: Default Forward and Default Authenticate
Replies: 11
Views: 24735

Re: Question: Default Forward and Default Authenticate

even i disable the default forward , i can able to ping my neighbour cpe. i disabled in Default forward & also in access list when you unchecked the default forward your wireless clients unable to have layer 2 connectivity together...but you can connect to all of them...be careful when you unchecke...
by tamilmaran
Mon Aug 06, 2012 4:46 pm
Forum: Wireless Networking
Topic: Question: Default Forward and Default Authenticate
Replies: 11
Views: 24735

Re: Question: Default Forward and Default Authenticate

even i disable the default forward , i can able to ping my neighbour cpe.
i disabled in Default forward & also in access list
by tamilmaran
Mon Jul 30, 2012 4:18 pm
Forum: Scripting
Topic: PUtting the content of RSC file on the body of an email
Replies: 4
Views: 1188

Re: PUtting the content of RSC file on the body of an email

do you have any auto backup mail script using rsc format.
for New version Router OS
Thank in advance
by tamilmaran
Sun Jul 22, 2012 3:53 pm
Forum: Scripting
Topic: Automatic backup script
Replies: 5
Views: 4612

Re: Automatic backup script

Guys am trying to set this automatic backup script in my all routers running OS 4.17, but when I run the script it gives me a error msg attached to this log file here, someone please help me what is wrong with the script below, how do I work it out...Your assistance will be highly appreciated....Th...
by tamilmaran
Sun Jul 22, 2012 12:33 pm
Forum: General
Topic: Feature requests
Replies: 1159
Views: 204782

Re: Feature requests

provide sms gateway support for send sms ,in sms tool option
by tamilmaran
Wed Jul 18, 2012 6:53 am
Forum: The Dude
Topic: Question about dude agent
Replies: 4
Views: 1684

Re: Question about dude agent

i can able to view the connected client devices & signal strength with connected routeros devices.
then what is the use of install the dude server on agents .
what is the advantage of it....
by tamilmaran
Tue Jul 17, 2012 5:02 pm
Forum: General
Topic: Virus Ports Block
Replies: 24
Views: 20410

Re: Virus Ports Block

instead of blocking the specfic ports,
can we use to block the ips by packet per second.
is it is reliable method..
can anyone suggest me the best...
by tamilmaran
Tue Jul 17, 2012 7:49 am
Forum: Scripting
Topic: Run scripts from API
Replies: 11
Views: 6408

Re: Run scripts from API

is possible get details such as config and wireless info from one mikrotik to another mikrotik... by using scripts. actually i have one gsm modem connected with the router. im going to use sms receiving option to get mikrotik info to my mobile fone. it is not possible to connect all router to sepera...
by tamilmaran
Tue Jul 17, 2012 6:56 am
Forum: General
Topic: clear logs
Replies: 6
Views: 3322

Re: clear logs

normis can you tell script or method to clear script.
by tamilmaran
Sun Jul 15, 2012 6:44 pm
Forum: Scripting
Topic: Mikrotik remote controlling via SMS
Replies: 2
Views: 1687

Re: Mikrotik remote controlling via SMS

Share the scripts.. Hi guys, I'm working on a university project which idea is to think of, and provide as many exemaples (scripts) of Mikrotik RB (411U in my case) remote controlling via. SMS and USB 3g modem. Currently I have following scripts: - for rebooting the device - notification about power...
by tamilmaran
Sat Jul 07, 2012 10:09 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 46913

Re: Vote for new DUDE features!

dude in android app will be great...!!!
by tamilmaran
Mon Jul 02, 2012 6:41 am
Forum: General
Topic: How can i assign Public addresses to private clients ??
Replies: 10
Views: 1908

Re: How can i assign Public addresses to private clients ??

I want to input the wan link into eth0 and get the main and extra public ip in same eth 1 port via connecting switch.
I dont have idea how to configure. Particularly get two different subnets in same eth1 port.
by tamilmaran
Sun Jul 01, 2012 8:07 pm
Forum: General
Topic: Howto Public IP´s on LAN-Client
Replies: 7
Views: 1179

Re: Howto Public IP´s on LAN-Client

my isp gave the ip address as follow: Ip: 14.102.69.2 mask: 255.0.0.0 gateway:14.102.69.1 Extra Public IP pool : Ip series :14.102.69.33 - 64 subnet: :255.255.255.224 Gateway: 14.102.69.32 my expected config is given below: expected config.jpg i didnt configure my mikrotik in router mode, till now i...
by tamilmaran
Sun Jul 01, 2012 8:05 pm
Forum: General
Topic: How can i assign Public addresses to private clients ??
Replies: 10
Views: 1908

Re: How can i assign Public addresses to private clients ??

my isp gave the ip address as follow: Ip: 14.102.69.2 mask: 255.0.0.0 gateway:14.102.69.1 Extra Public IP pool : Ip series :14.102.69.33 - 64 subnet: :255.255.255.224 Gateway: 14.102.69.32 my expected config is given below: expected config.jpg i didnt configure my mikrotik in router mode, till now i...
by tamilmaran
Wed Jun 27, 2012 8:54 pm
Forum: Wireless Networking
Topic: Experimenting with AirMax Sectors
Replies: 16
Views: 3945

Re: Experimenting with AirMax Sectors

I used 2.4 airmax mimo antenna with R52hn card with 433 ah, from last month im getting latency issues, when i watched over winbox i found packet in TX frames only. by comparing Tx/ rx frames with Tx/Rx Hw. Frames. Now i changed with 711 UA 2hnd & Lmr 200 cable , then also im getting same problem her...
by tamilmaran
Mon Jun 25, 2012 9:14 pm
Forum: Wireless Networking
Topic: WDS performance and best practices
Replies: 11
Views: 6468

Re: WDS performance and best practices

If possible, use MPLS in place of WDS. WDS has an issue with one of the 802.11n packet packing mechanisms. It's a standard conflict, we can't fix it.
if issue will occur for ptmp links too...?
by tamilmaran
Mon Jun 25, 2012 8:50 am
Forum: RouterBOARD hardware
Topic: Documentation of faults
Replies: 7
Views: 1425

Re: Documentation of faults

xxxxx
by tamilmaran
Sun Jun 24, 2012 8:22 am
Forum: Beginner Basics
Topic: default forwarding-no, how do i change?
Replies: 8
Views: 3129

Re: default forwarding-no, how do i change?

The main advantage would be the privacy of the customers, because they don't have the luxury of a firewall between them. If forward is possible, they would see e.g. each others computer in the windows network pane. The second advantage would be that direct data transfer is not possible, so a massiv...
by tamilmaran
Sat Jun 23, 2012 6:00 pm
Forum: RouterBOARD hardware
Topic: Documentation of faults
Replies: 7
Views: 1425

Re: Documentation of faults

Yes such documents exist for most products. Distributrors have access to them. Which product do you have and what is the problem?
in india, the distributor, dont even give warranty for mikrotik, they simply said mikrotik dont give warranty for us.
by tamilmaran
Sat Jun 23, 2012 5:52 pm
Forum: General
Topic: Virus Ports Block
Replies: 24
Views: 20410

Re: Virus Ports Block

example screenshot is two posts above :)
how could i find extactly it is virus or some messenger & anything else..
any tips pls...
by tamilmaran
Sat Jun 23, 2012 5:15 pm
Forum: Beginner Basics
Topic: default forwarding-no, how do i change?
Replies: 8
Views: 3129

Re: default forwarding-no, how do i change?

what is the advantage of this setting "default forward"
is virus or ARP posining problem is overcome by this...?
by tamilmaran
Fri Jun 22, 2012 7:28 am
Forum: General
Topic: HOTSPOT + ARP POISONING
Replies: 4
Views: 2012

Re: HOTSPOT + ARP POISONING

Is there any tool available through which I can create a ready made PPPoE dialer setup for user. Like in VPN, we have CMAK option which creates custom dialer , users simply install it and enter user id passwd only,
how to find the ARP Poisining,
pls share your method to find it
by tamilmaran
Fri Jun 22, 2012 7:24 am
Forum: Beginner Basics
Topic: Suggestions Required For New Network !
Replies: 2
Views: 709

Re: Suggestions Required For New Network !

r u using cable modem technology or wireless ap.
by tamilmaran
Fri Jun 22, 2012 7:21 am
Forum: General
Topic: Virus Ports Block
Replies: 24
Views: 20410

Re: Virus Ports Block

can anyone can tell with example screen shot ,how to find the infected port by using torch tool...
waiting for valuable reply...
Thank in advance.
by tamilmaran
Thu Jun 21, 2012 9:47 pm
Forum: General
Topic: give some websites at different speeds to the user
Replies: 4
Views: 682

Re: give some websites at different speeds to the user

Yes its very easy. There are several ways to achieve your goal. One way is to mark packets for ip address of msn and include MSN website IP Address pool, you can find it by querying msn.com domain. then create simple queue which allows unlimited bandwidth for these marked packets. Move it on top of...
by tamilmaran
Sun Dec 11, 2011 8:47 pm
Forum: Wireless Networking
Topic: Dbii F52 pro is no more.
Replies: 5
Views: 1185

Re: Dbii F52 pro is no more.

f52 is totally stopped because of 2.4 performance issues, i bought it , finnaly got rma with f20 pro cards
by tamilmaran
Tue Nov 22, 2011 9:20 am
Forum: Wireless Networking
Topic: 433 AH real world Throughput in AP mode
Replies: 2
Views: 559

Re: 433 AH real world Throughput in AP mode

Same clients?

What is your signal, ROS version, radio cards, etc?
5.8 version , compex , r52 hn and extra...
by tamilmaran
Tue Nov 22, 2011 6:21 am
Forum: RouterBOARD hardware
Topic: Out of warranty rb433 with PHY error, repair?
Replies: 2
Views: 798

Re: Out of warranty rb433 with PHY error, repair?

Can anybody tell me if repair is possible and how?
Would this be a costly thing to have it done?
Who?

I have a whole series of boards up for repair. Anybody that wants to make some (economic) bugs?
email mikrotik support for service manuals with your s/n of routerboards.
by tamilmaran
Tue Nov 22, 2011 6:16 am
Forum: Wireless Networking
Topic: 433 AH real world Throughput in AP mode
Replies: 2
Views: 559

433 AH real world Throughput in AP mode

hi guyz.. i'm a wisp tried with many 433 ah with many mini pci cards but it will never crossed the 2 Mbps throughout after that i got congested with latency problems, even it handle 20+ clients. But in other modes it gives more throughput. i want know this is the limitation of throughput in AP mode....
by tamilmaran
Tue Nov 22, 2011 6:00 am
Forum: General
Topic: RB711UA-2HnD to Omni Antena
Replies: 5
Views: 1723

Re: RB711UA-2HnD to Omni Antena

Anybody suggest me the best setup.
im already having mimo antenna, i want high coverage and throughput
suggest me best setup for PTMP AP mode.
711 UA 2HND - 64 MB, 400 mhz
411 AH with R52 HN - 64MB, 680mhz
433AH with R52 HN - 128 MB ,680 MHZ.
by tamilmaran
Tue Nov 15, 2011 5:10 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28620

Re: NEW RB711

Hello.
We in Czech Republic have problems with the last delivery rb711-5Hn. It is very bad tx signal. About 20 db worse than it should be. Is it a manufacturing defect?
definetely
by tamilmaran
Sun Nov 13, 2011 5:33 am
Forum: Wireless Networking
Topic: Need Lightning Arrestor Advice for a project in rural Hondur
Replies: 15
Views: 3203

Re: Need Lightning Arrestor Advice for a project in rural Ho

Good day... Hi, if you interest on the POE Surge protector, I may able to help you. we have apply the POE surge protector in our network and for the pass 2 years, all of them is working fine compare the time we not use and cause a lot of hardware failure. suggest me a best poe surge protecter, on m...
by tamilmaran
Sun Nov 13, 2011 5:29 am
Forum: Wireless Networking
Topic: Need Lightning Arrestor Advice for a project in rural Hondur
Replies: 15
Views: 3203

Re: Need Lightning Arrestor Advice for a project in rural Ho

Good day... Hi, if you interest on the POE Surge protector, I may able to help you. we have apply the POE surge protector in our network and for the pass 2 years, all of them is working fine compare the time we not use and cause a lot of hardware failure. if i used i poe surge protector, seperated ...
by tamilmaran
Sun Nov 13, 2011 5:26 am
Forum: Beginner Basics
Topic: Hide ISP Provider
Replies: 5
Views: 2814

Re: Hide ISP Provider

is it is possible by using any proxy server??
by tamilmaran
Wed Nov 02, 2011 9:06 pm
Forum: Beginner Basics
Topic: Hide ISP Provider
Replies: 5
Views: 2814

Hide ISP Provider

hi, i want know to hide ISP provider name from last mile customers during Speed test websites.
Im already using squid proxy in my server.
Here is the example speed test:
ss.JPG
I want hide "bharathi Broadband" from last mile customers
help me
Thanks in advance
by tamilmaran
Tue Nov 01, 2011 8:13 pm
Forum: RouterBOARD hardware
Topic: Rb411AH NIC Failure
Replies: 12
Views: 3631

Re: Rb411AH NIC Failure

Grounding is an art that can be learned with experience. Just keep in mind that you want static electricity to discharge through the tower / ground rod / ground wire, instead of the electronics inside your equipment. So always make your grounding effort more inviting to electricity than the equipme...
by tamilmaran
Sun Oct 30, 2011 8:14 pm
Forum: RouterBOARD hardware
Topic: Ethernet problems caused probably by RFI/EMI
Replies: 11
Views: 2440

Re: Ethernet problems caused probably by RFI/EMI

Unshielded cable flatly not recommend use for any outdoor installation! That's reason for more then half all RB damages.
With stp cable what is the advantages,
how could it properly use it..
guide me
Thanks in advance
by tamilmaran
Sun Oct 30, 2011 8:11 pm
Forum: Wireless Networking
Topic: Wireless card recieve blows issue
Replies: 92
Views: 36185

Re: Wireless card recieve blows issue

Use :

- DC Grounded Omni
- Use Ethernet surge protector

- Ground your :
- board
- enclosure
- antenna mounting
- etc.


Thx
//Budi
may i want use sepearte earthing wire for all things or same ground is enough
by tamilmaran
Sun Oct 30, 2011 8:04 pm
Forum: RouterBOARD hardware
Topic: Rb411AH NIC Failure
Replies: 12
Views: 3631

Re: Rb411AH NIC Failure

You need to think about proper grounding for them in the future. Reset the configuration, upgrade MikroTik RouterOS to 4.5 and RouterBOARD firmware by /system routerboard upgrade and /system reboot. If it does not help, return boards to your supplier. So are you saying that Mikrotik will replace li...
by tamilmaran
Sun Oct 30, 2011 6:44 pm
Forum: RouterBOARD hardware
Topic: Router Board repair
Replies: 49
Views: 15468

Re: Router Board repair

please send service manual to my mail id tamilmaran@gmail.com
Thanks in advance
by tamilmaran
Sun Oct 30, 2011 6:32 pm
Forum: RouterBOARD hardware
Topic: NEW RB711
Replies: 110
Views: 28620

Re: NEW RB711

Vincent, if we would make something like that, it would not be for the most affordable device. Some people don't need many features. They need a cost effective device to make CPEs from. This is why we made RB711. i like mikrotik very much best of feautures and pricing, but none of the dealers & res...
by tamilmaran
Sat Oct 29, 2011 9:02 pm
Forum: Wireless Networking
Topic: Need Lightning Arrestor Advice for a project in rural Hondur
Replies: 15
Views: 3203

Re: Need Lightning Arrestor Advice for a project in rural Ho

Good day... Hi, if you interest on the POE Surge protector, I may able to help you. we have apply the POE surge protector in our network and for the pass 2 years, all of them is working fine compare the time we not use and cause a lot of hardware failure. suggest me a best poe surge protecter, on m...
by tamilmaran
Thu Oct 27, 2011 7:27 pm
Forum: General
Topic: Merge two lines
Replies: 14
Views: 4820

Re: Merge two lines

haha, how did you do that with Speedtest? it uses single connection, AFAIR =)
anybody tell gow to bonding to 2 wan line
first wan = 4 Mbps
second wan = 2 Mbps
i want 6 Mbps on my lan
im don't want loadbalacing using pcc
actually want to merge 2 wan link...
thanks in advance
by tamilmaran
Thu Oct 27, 2011 7:21 pm
Forum: Wireless Networking
Topic: Confused about rts/cts
Replies: 64
Views: 27317

Re: Confused about rts/cts

im caught in the hidden node problem,having 20+clients in coverage of 1.5 km using tplink 501g as cpe, got collision by some clients. sing 433 ah 5.6 router os in bts By last post in the forum, i came to know. 1.To enable rts/cts nothing to change ap end settings. 2.Enable rts setting on all Client...
by tamilmaran
Tue Oct 25, 2011 2:45 pm
Forum: Wireless Networking
Topic: Confused about rts/cts
Replies: 64
Views: 27317

Re: Confused about rts/cts

im caught in the hidden node problem,having 20+clients in coverage of 1.5 km using tplink 501g as cpe, got collision by some clients. sing 433 ah 5.6 router os in bts By last post in the forum, i came to know. 1.To enable rts/cts nothing to change ap end settings. 2.Enable rts setting on all Client ...
by tamilmaran
Mon Oct 17, 2011 7:07 am
Forum: Beginner Basics
Topic: Want to access MIKROTIK from Outside Network
Replies: 0
Views: 487

Want to access MIKROTIK from Outside Network

I want to use Public IP's in my Mikrotik Access Point 433 AH. I tried of add the public ip in ETH 1 (14.102.69.37/27) , but i cant access it.. How do add ip to make available even out of the network. network diagram1.JPG MAIPU ISP Router Ip: Ip: 14.102.69.1 Radius Server: Ip: 14.102.69.2 mask: 255.0...
by tamilmaran
Mon Oct 17, 2011 7:02 am
Forum: Beginner Basics
Topic: Forwarding privatnetwork requests from external IP to intern
Replies: 7
Views: 1249

Want to access MIKROTIK from Outside Network

I want to use Public IP's in my Mikrotik Access Point 433 AH. I tried of add the public ip in ETH 1 (14.102.69.37/27) , but i cant access it.. How do add ip to make available even out of the network. network diagram1.JPG MAIPU ISP Router Ip: Ip: 14.102.69.1 Radius Server: Ip: 14.102.69.2 mask: 255.0...
by tamilmaran
Mon Sep 05, 2011 9:44 pm
Forum: Wireless Networking
Topic: Experimenting with AirMax Sectors
Replies: 16
Views: 3945

Re: Experimenting with AirMax Sectors

im airmax sectors ,actually im having two airmax sector, one is working fine. but another one wont give RX on wlan when i check CH0 tx & CH0 rx is checked. But Ch1 has no problem, When CH0 is checked means mt router board ip also gives me request time out while pinging. able to open routerboard via ...