Sent from my SM-G928C using Tapatalk
There is no problem.Well, current version is quite stable. If it's unstable for you - please write to firstname.lastname@example.org with detailed description of your problem.
It will be nice and useful , if you add two filed for height of towers and draw fresnel zone . some thing like this :
+1 great idea+1 for HA (msrp - mikrotik standby router protocol?)
+1because what ROS IPv6 DHCP does, is only prefix delegation, IMHO it is less confusing if ROS will change the name to DHCP PD Server.
Check this results in winbox 2.x to see difference.What do you mean ...wireless snooper result don't indented in winbox 3.x
It seams OK to me ...
+1Dear support and developers, could you please spend 10-15 min a month to post progress summaries for V7?
I'm not asking for huge detailed report, just very quick summary so we can see some progress going.
/ip firewall mangle add src-address=22.214.171.124/26 action=mark-routing new-routing-mark=lan2 /ip route add gateway=192.168.3.x add gateway=l2tp-out1 routing-mark=lan2
/system routerboard upgrade
+1 possibility to enable/disable functionalities, It is better idea.Sounds like a good idea. There are places, where we don't need quickset. Separate package would be sufficient, no need to have separate RouterOS versions, just possibility to enable/disable functionalities.
/routing filter add chain=connected-in prefix=192.168.88.0/24 prefix-length=24 set-pref-src=192.168.88.2
how to configure access to the socks proxy on my MIKROTIK for users from the Internet?
/ip socks set enabled=yes
If you use gigabit POE, You can benefit from its use. But if you use 100Mbit POE, So that interface run in 100Mbps speed.First injector is Gigabit. Sencond is 100Mbit
Sorry, there is no way to get rules via SNMP.I can use only SNMP protocol. It haven't to be used in DUDE. I can use else software, but only via SNMP.
Is possible to get firewall rules via SNMP? I tried SNMP walk in Dude but there is nothing about this. Any ideas?
I am new in this program..
I need to know how can I log clint's upload-download amount?
HiHi every one
Can any one help me out how to load balance 2Wans in mikrotik 450g
/ip hotspot ip-binding add address=192.168.88.1 type=bypassed
Because the route create dynamically when user connected to the router and disappear when user disconnected. And so the route will work flawlessly in all kinds of conditions, such as: changed vpn client ip address or any other changes.Why is it "better"?
If MTU is too large and next header is IPso if i keep the mtu 1500 the RB must fragment the packet, right?
/mpls ldp set use-explicit-null=yes
/ip firewall nat add chain=dstnat dst-address="public address" protocol=tcp dst-port=5555 action=dst-nat to-addresses=192.168.1.11 to-ports=4455
/routing ospf interface set 0 passive=yes /routing ospf interface enable 0
/ip firewall nat add chain=srcnat dst-address=10.10.10.17 action=masquerade
/ip firewall nat add chain=srcnat dst-address=192.168.100.4 action=masquerade
i have the same issue but i dont have hostspot.
how can it be solved?
But I thing you should use 1526 for mpls interface MTU when use vpls.mpls interface MTU is 1500 for all.
/mpls interface set 0 interface=all mpls-mtu=1526
/ppp secret add name="myvpn" service=pptp password="xxxxxxx" profile=pptp-in routes=192.168.1.0/24
You can implement WDS between APs and using HWMP+ for creating mesh network.future request
mesh protocol on mikrotik device support nv2 protocol.
yeahHow can I change the default winbox port in the DUDE?
yeahDid you try something like 192.168.88.1:8292
I know how I can change the winbox port!you can edit or view port number of winbox