Community discussions

MikroTik App

Search found 9 matches

by Nitin
Wed May 27, 2020 12:35 pm
Forum: Beginner Basics
Topic: Cap config - Repeater mode AND allow access on ethernet port
Replies: 0
Views: 349

Cap config - Repeater mode AND allow access on ethernet port

Hello Is this configuration possible (and if yes - Please post how to) RouterBoard acts as all of them together- 1)CAP client (no physical wire to CAP manager, it connects and obtains the config purely by CAP). 2)Becomes a repeater of the network it connected to. 3)Provides access to other clients o...
by Nitin
Sun Jan 12, 2020 7:05 pm
Forum: RouterBOARD hardware
Topic: Map2nd - Ethernet 1 dead
Replies: 0
Views: 2772

Map2nd - Ethernet 1 dead

Hello I had been using Map2nD in a sheltered area, but outside - and it didnot survive more than 2 months. Now, after cleaning all the dust, I have the following working - a) Wireless works b) Ethernet PoE1 works, but NOT the ethernet. c) The system volts is always 0,7v (in system health) If I conne...
by Nitin
Sun Jul 07, 2019 9:24 pm
Forum: General
Topic: Groove A-52HPn r2 - Capsman error
Replies: 0
Views: 633

Groove A-52HPn r2 - Capsman error

Hello I have a Groove A-52HPn r2 which I just cannot make it play with capsman. From memory, I had set up another Groove A-52HPn r2 long time back using capsman, so i am guessing some strange error is brought in by subsequent versions. The error - It just cannot be provisioned by capsman. I had trie...
by Nitin
Thu Mar 22, 2018 4:53 pm
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 38564

Re: v6.41.3 [current]

Why is it so difficult for Mikrotik to write proper DHCP server? I have been using Mikrotiks since 2010s, and this has been a consistent pain in the wrong place. If you google, most of the senior forum members will deny this problem existence and will blame faulty hardware and or cables. But serious...
by Nitin
Tue Feb 20, 2018 1:06 pm
Forum: Beginner Basics
Topic: Capsman+Userman based Qos and authentication
Replies: 1
Views: 435

Re: Capsman+Userman based Qos and authentication

Nobody? To clarify, the problem is 1. Use single SSID (capsman) and few others. 2. Assign address from pool1 if MAC is present in trusted MACs. 3. Any new MAC is considered untrusted and is given dhcp from pool2. The other problem (Qos, communicating beyween each other) is trivial and can be easily ...
by Nitin
Mon Feb 19, 2018 6:13 pm
Forum: Beginner Basics
Topic: Capsman+Userman based Qos and authentication
Replies: 1
Views: 435

Capsman+Userman based Qos and authentication

Hello I have the following setup Capsman running on RB1200, which dials up into ISP as PPPoE. This main router needs to implement Qos and security. There is SINGLE wifi SSID which is published using Capsman. The idea is that certain known MACs are to be authenticated by Userman, and given IP address...
by Nitin
Thu Apr 06, 2017 3:51 pm
Forum: Wireless Networking
Topic: CapsMan with Repeater function
Replies: 0
Views: 1301

CapsMan with Repeater function

Hello After deploying a few caps clients, I cannot get away from the simplicity. I want to extend it in such a way that my repeaters radios are also controlled by capsman. So, I tried creating virtual APs(2 APs on my repeater) and tried to associate one AP with capsman and other AP - tried to as cli...
by Nitin
Fri Oct 07, 2011 10:49 am
Forum: General
Topic: Time shortage - Help required in setup RB1200 site to site a
Replies: 1
Views: 692

Time shortage - Help required in setup RB1200 site to site a

Hello Due to time shortage, I cannot go through wiki etc - So, asking for help in setting up this scenario - Facts - 3 sites(same city, same provider), each with RB1200(ver 5.7). 2 Sites overseas, using ISA server. Current setup is mesh VPN setup. All sites are connected to each other using PPTP. Th...
by Nitin
Sat Sep 24, 2011 8:23 pm
Forum: General
Topic: Help Needed for RouterBoard 1200 - DMZ
Replies: 1
Views: 585

Help Needed for RouterBoard 1200 - DMZ

Hello I need help in setup the following a) Make a new PPPoE connection, which dials into ISP and gets dynamic address(Eth1 goes to Fiber Optic Box) b) Make Eth2 as "pure" DMZ. This Eth2 will forward everything to our ISA server. Our ISA server handles everything (routing, natting, tunneling etc) In...