It's probably useless to argue this. If you can't see it yourself, I can't make you.
Obviously any use of login credentials regardless of the network topology it is used in must always be encrypted.
As far as I have seen so far, there are no t-sfp+ modules.I'm not interested in 1G ports. Already have couple of such switches.TP-Link T1700G-28TQ?
I want to upgrade my network to 10G.
I was thinking about buying CRS317-1G-16S+RM but idea of having
so many copper SFP+ modules makes me cringe.
Full table doesn't fit in 1GB anymore.Just wait till you see some of the L3VPN/L2VPN NLRI on a service provider on a route reflector. It's far more than that.....1GB for just one BGP feed that's a lot.
PleaseI got it, so I must wait..bajodel - This is different fix for other issue.
Please.. answer.. when do you plan to make partitions work on RB3011/ARM ?
Yes and yes.Wait a second... you're saying whole OS is on the USB stick?!All of my ERL3's have suffered from faulty onboard USB storage.
It's ridiculous and unreliable
You can solve that only by dumping all configs and understanding your network.I agree partially. But my problem is the lack of documentation which leads to such problems. I cant find a way to overcome all these issues so far. I got problems like this and i cannot solve them
Now that's just marketing bs.we have something better than hardware NAT, it is called Fasttrack.
Same here, rebooting on 450g, stable on 850g.Not working on my 450g, it restarts every few minutes.
On second router 2011 works fine.
2nd that, it's very much fast enough.If you don't need many ports, I would buy the new version of the RB850Gx2.
All ports stay down. I sent a mail to Mikrotik support, no answer yet.Please describe "kills"Still kills my rb450g, last working os is 6.29.1.
My recommendation is RB850Gx2 as a minimum.CRS is quite slow as a router, it is intended to be mainly a switch.
This should be fairly easy. I'm not sure you have understood vlan trunking though. There is no intervlan trunking and the term suggests a misconception on your part.Bump!
I would really appreciate some feedback on this.
Regards,
Henry.
What in the world has this to do with vtp?This config is easy to solve with Cisco using VTP. Im curious about solving this issue on Mtik.
In that case you need to use the switch, with master/slave ports. Those need to be separate for the two switch chips and you can then bridge those.why you say it will be bad?
i realy expect to have Gbit on those 5x Gbit ports.
Iperf result was 950 MBit with one nat rule and 1500byte mtu.Barkas,
Do you think the 850g2 will do 1000mpbs wan to lan when it becomes available?
This one is about 20% faster than the 750gl,so, not fast enough.This router can be a better choice because includes wireless.
http://routerboard.com/RB951G-2HnD
It can reach 300mbps. It is also overclockable to 750Mhz, stable.
Currently metarouter does not seem multicore capable.Will the 850Gx2 have metarouter support or will it be similar to the RB1100AHx2, with no support?
has it?The RB850Gx2 have identical dimension, serial port, reset, jack, ethernet placement and characteristics of 450G except of:
Dual Core 500MHz PPC CPU (Single core 680MHz MIPS-BE CPU on 450G)
512MB RAM (256MB on 450G)
Only with stp or something similar. Without that, it's called a loop, which is bad.Yes, I would do a circle... this is not possible?
don't hold your breath.When we can expect IGMP snooping on CRS?
So disable voltage.ko when metarouter is enabled if they are worthless anyway and tend to cause unpredictable system behaviour.values reported can vary wildly if running metarouter guests. Just ignore readings given by '/system health' in this case.
Upgrading ate my default route, for some unfathomable reason. After replacing it, it did work again.openvpn issue should be something completely un-related to MetaROUTER.
Strangely, only the ones with higher voltage seem to cause the reboots, while my cheap 12V power supply works so far.and PSUs are ok too? If older PSU is used, then that also could cause some problems as under load voltage drops to lower voltage than expected. Just some thoughts.
I can't quite believe you.We use MetaROUTERs in our network, and it works fine without reboots. As well MetaROUTER are being used by many other users with success.