Community discussions

MikroTik App

Search found 31 matches

by gio
Sun Apr 26, 2020 1:34 pm
Forum: Wireless Networking
Topic: BT Bandwith Test fails
Replies: 3
Views: 1393

Re: BT Bandwith Test fails

some other suggestions or answers? Why my TX is so less? Tx/Rx 10s Average 12.0 kbps/19.2 Mbps } on which it depends ? Why my PTP Bridge AP is not connected to my PTP Bridge CPE in the Bandwith Test Tab ? ... I want to check if my connection has really a poor upload or not. Are they other methods to...
by gio
Thu Apr 23, 2020 4:23 pm
Forum: Wireless Networking
Topic: BT Bandwith Test fails
Replies: 3
Views: 1393

Re: BT Bandwith Test fails

Could be firewall blocking BT, add input rule accept with port 2000 for BT on both devices, disbale rule once tests are complete Thank you for the answer! My firewall rules are: a) On the AP side: ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration cha...
by gio
Fri Apr 17, 2020 4:10 pm
Forum: Wireless Networking
Topic: BT Bandwith Test fails
Replies: 3
Views: 1393

BT Bandwith Test fails

Hi! I bought a brand new RB SXT 5HPnd to replace my older one RB SXT 5HnD which was my AP on my wireless connection. Onthe client side I have a other RB SXT 5HnD. I made the wireless connection, but however the BT fails. Also the wireless connection is poor! When I am on the clients side and try a B...
by gio
Mon Apr 13, 2020 12:00 am
Forum: Wireless Networking
Topic: Difference's and Compatibility
Replies: 3
Views: 1286

Re: Difference's and Compatibility

thank you for the link! the question, If it is compatible with my older one "RB SXT 5hnD" remains. But i think it should be! right? Looking around i found another option that i have on a price very close to the, in the first post mentioned, RB SXT 5HPnD. It's the "RBSXTG-5HPnD-HGr2" I figured out -f...
by gio
Sun Apr 12, 2020 5:04 pm
Forum: Wireless Networking
Topic: Difference's and Compatibility
Replies: 3
Views: 1286

Difference's and Compatibility

Hi! a long time ago i setup a link with 2 RB SXT 5HnD. Now i think the "sender" is damaged because when i connect a ethernet-cable direct to a pc the connection appears and disappears in a endless loop. So i want to buy a new one. But exactly the same are not exists in the Market here where i am. Th...
by gio
Sat Mar 21, 2020 7:42 am
Forum: Beginner Basics
Topic: ERROR: could not connect to "Mac adrress" (port 20561)
Replies: 2
Views: 2053

Re: ERROR: could not connect to "Mac adrress" (port 20561)

Hi there! ~ 2 years later still with the same issue! I connect my RB SXT 5HnD directly with a ethernet cable to my Laptop running Windows 10. I try to Connect to the RB SXT 5HnD (wich is in ver 5.5 but still running), with all for me possible Versions of Winbox 2.2.16, 2.2.18, ..., 3.11, 3.22 unfort...
by gio
Fri May 25, 2018 12:21 pm
Forum: Beginner Basics
Topic: ERROR: could not connect to "Mac adrress" (port 20561)
Replies: 2
Views: 2053

ERROR: could not connect to "Mac adrress" (port 20561)

Hallo! I try to connect to a RB SXT 5HnD using winbox (the last and a older version) on Windows 8 and I get the ERROR: could not connect to "Mac adrress" (port 20561)! The RB OS version is an older one 5.5! Even via Browser it is not possible to connect on it! If I cant connect it is also not possib...
by gio
Fri May 18, 2018 7:06 pm
Forum: General
Topic: Could not connect to 00:42:0C:XX:XX(port 20561) - timed out!
Replies: 3
Views: 3605

Re: Could not connect to 00:42:0C:XX:XX(port 20561) - timed out!

Hallo! The same problem here! I try to connect to a RB SXT 5HnD using winbox (the last and a older version) on Windows 8 and I get the ERROR: could not connect to "Mac adrress" (port 20561)! The RB OS version is an older one 5.5! Even via Browser it is not possible to connect on it! If I cant connec...
by gio
Thu May 17, 2018 8:59 am
Forum: Wireless Networking
Topic: Are the New RB SXT (5 LITE) still working with...
Replies: 3
Views: 477

Re: Are the New RB SXT (5 LITE) still working with...

Thank you for the answer!

however i would prefer to buy the same type. Do you know if the RB SXT 5HnD are no longer available?
by gio
Wed May 16, 2018 9:07 pm
Forum: Wireless Networking
Topic: Are the New RB SXT (5 LITE) still working with...
Replies: 3
Views: 477

Are the New RB SXT (5 LITE) still working with...

Hallo, I have the following case: Over aprox. 5 years I have a link with 2 RB SXT 5HnD. The link was working fine until few days ago where after a very big Storm the one of them are destroyed. Looking at the market from where I bought them, there isn't now exactly the same type. Now they are offer o...
by gio
Fri Oct 05, 2012 12:49 pm
Forum: Beginner Basics
Topic: OmniTik share's IP-adresses
Replies: 1
Views: 684

OmniTik share's IP-adresses

OK the Title may are not the best but i have following issue. I have a OmniTik in my Roof for bridging with 2 SXT's My Router a other device (ZTE) should share the IP-adresses to the connected devices but however the OMNITIK does it at first. The OmniTik has a type 192.168. 88 .XXX address so someti...
by gio
Fri Jun 08, 2012 11:27 am
Forum: Wireless Networking
Topic: Omnitik and SXT low speed
Replies: 18
Views: 4186

Re: Omnitik and SXT low speed

many thanx for the Answer! After upgrade RouterOS and Firmware to 5.17 in the Section (via browser) from the left Menu Tools --> Bandwith Test after choosing one of the connected SXT's and setting user as admin and press the START Button i can't se anything in the Graph (like before upgrade) but the...
by gio
Thu Jun 07, 2012 11:42 am
Forum: Wireless Networking
Topic: Omnitik and SXT low speed
Replies: 18
Views: 4186

Re: Omnitik and SXT low speed

Hmm... thanx for the reply! and i thought it was something else, i have choosen NV2 protocol but at this time very bad connection bzw.(german) very low speed under 200 Kbps. I will try to update / upgrade my installation (2 SXT & 1 OmniTIK). I have a Question about it (to everyone). Can i upgrade Ro...
by gio
Wed Jun 06, 2012 1:59 pm
Forum: Beginner Basics
Topic: How to check if my connection is in bridge mode?
Replies: 4
Views: 765

Re: How to check if my connection is in bridge mode?

http://cl.ly/1c0j1N2Q0Z262s0E3f1D this is the "/export file=config" from the OmniTIK. Do you need also thisone from the SXT? I want to add that my speed is very very low under 1Mbps and from time to time the Connection lost totally. What is the prefered Channel width? / What is the difference betwee...
by gio
Tue Jun 05, 2012 10:24 pm
Forum: Beginner Basics
Topic: How to check if my connection is in bridge mode?
Replies: 4
Views: 765

Re: How to check if my connection is in bridge mode?

i don't know! but i can access the interface of my OmniTIK from here ( left side menu IP--> DHCP Server i have this )
by gio
Tue Jun 05, 2012 9:19 pm
Forum: Beginner Basics
Topic: How to check if my connection is in bridge mode?
Replies: 4
Views: 765

How to check if my connection is in bridge mode?

Hi i achieve a connection with one of my two sxt's with the OmniTIK but i am not sure if i am really in bridge mode.

Is there a way to check if my connection is in bridge mode?

Many thanx in advance!
-gio-
by gio
Tue Jun 05, 2012 8:56 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

I have following Question: Do i need for connecting 2 SXT's to the OmniTIK 2 wlan entries in the Wireless menu? or is one enough for booth SXT's? even if there are in bridge mode? thanx in advance for response! [ Now i have move the one SXT in the further away building approx. 2390 meters distance. ...
by gio
Tue Jun 05, 2012 1:31 pm
Forum: Wireless Networking
Topic: Omnitik and SXT low speed
Replies: 18
Views: 4186

Re: Omnitik and SXT low speed

solved my problem, i had to force NV2 protocol. Hi brosky, please can you explain to me ( i have the same installation 1 OmniTIK 2 SXT) what you mean force NV2 protocol where i will find this? and must i do the same to the SXT's or only on the omniTIK? (hope you understood, because of my bad englis...
by gio
Tue Jun 05, 2012 12:03 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

just leaving on theOmnitik Mode: Ap-bridge.
Actually i changed it to "bridge", exactly like the link above say's!
by gio
Mon Jun 04, 2012 6:23 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

i solve it in another way... but i don't know really how...

i just followed this how to just leaving on theOmnitik Mode: Ap-bridge.

But i can only access it via the Browser not via WinBox!?!
by gio
Mon Jun 04, 2012 6:13 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

This will remove your firewall and your problem. Now be sure to create your own firewall to protect your router. /ip firewall filter remove [/ip firewall filter find] Isn't there a way to just remove my problem without removing my firewall??? Isn't there a way to just have access from the PoE-Ether...
by gio
Mon Jun 04, 2012 5:19 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

A. [admin@MikroTik] > /ip firewall export # jan/02/1970 00:04:13 by RouterOS 5.4 # software id = JUHQ-1KHI # /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=10s ...
by gio
Mon Jun 04, 2012 5:10 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

I can acces to the Omnitik only via Ethernet port 2 ( maybe also 3 and 4..) but i can't access it from the PoE-Ethernet-Port 1. i checked "ip firewall filter Rules" and "ip service list" but i can't see something that is understandable for me. Can i send a picture? I need to have access from the PoE...
by gio
Mon Jun 04, 2012 4:51 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

i think "station" will be OK for my SXT.

But i have another issue.

I can't acces to my Omnitik using Ethernet-1 only.
How can i do this? Do i need another Configuration?
by gio
Mon Jun 04, 2012 4:06 pm
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Re: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5Hn

Thanx for the reply! at the moment i am with the following configuration on the Devices: a. OmniTIK U-5HnD Wireless--> Interfaces --> Interface <wlan1> Mode: ap bridge ... b. SXT 5HnD Wireless--> Interfaces --> Interface <wlan1> Mode: station ... The 1st Question is: is this right? The 2nd Question ...
by gio
Mon Jun 04, 2012 10:30 am
Forum: Beginner Basics
Topic: Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"
Replies: 17
Views: 11700

Manual for Connecting a Omnitik "U-5HnD" with a "SXT 5HnD"

I am looking for a step-by-step how to, to connect a OmniTIK 5-HnD with a (one for the beginning) SXT 5HnD. 1 Year ago i connected 2 SXT 5HnD together via Bridge-Mode as PtP. But i can't remember anything! Because the connection of the 2 SXT's are very good i bought a omniTIK and 2 more SXT's to try...
by gio
Wed Nov 02, 2011 10:33 am
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1851

Re: Wich RB is ideal for small Distance (0.401 mil or 0.646

however i have the Connection!

Is there someone who know :
how can i check the velocity?
how can i increase security?

many thanks in advance!
by gio
Tue Nov 01, 2011 11:44 am
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1851

Re: Wich RB is ideal for small Distance (0.401 mil or 0.646

Do you have tcp port 8291 open in your firewall? Do you have static IP 192.168.88.2 on youre NIC? -i have tried with firewall disabled completely some -NIC ? what you mean exactly? anyway i have interface via the Browser from both SXT's and i have go STEP-by-STEP like that link but the STEP: { Clie...
by gio
Mon Oct 31, 2011 5:22 pm
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1851

Re: Wich RB is ideal for small Distance (0.401 mil or 0.646

Hi there again! after some days of searching, reading, comparing, etc. i decided to buy 2 RB/ SXT's At my Office i try to make the STEP-by-STEP configuration from this site. But in the first Step after the connecting both with the router/switch i get an empty "Connect To:"-Window on clicking at the ...
by gio
Thu Oct 06, 2011 2:15 pm
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1851

Re: Wich RB is ideal for small Distance (0.401 mil or 0.646

Some days ago, i set up a line of sight PTP SXT link, distance was 100 - 150 meters.
TX power is 6 dBm and RX signal at both ends is around -64dBm.

No problems, fast, easy and low cost. (cant wait to see how it survives winther here in the arctic:)

Good luck:)
What bandwith did you achieved?
by gio
Thu Sep 29, 2011 8:18 pm
Forum: Beginner Basics
Topic: Wich RB is ideal for small Distance (0.401 mil or 0.646 km)
Replies: 9
Views: 1851

Wich RB is ideal for small Distance (0.401 mil or 0.646 km)

Hi i want to connect 2 Points together but the distance is quite small with the googlemaps-distance-calculator i have 0.401 mile or 0.646 km. Is for such a small distance a system like the following OK or should i try something else ? Sender/(Uploader) RB/711-5Hn Receiver RB/711-5Hn (same like Sende...