Community discussions

MUM Europe 2020

Search found 172 matches

by arjuneu
Mon Sep 16, 2019 6:31 pm
Forum: General
Topic: Different Latency between Ping and Traceroute
Replies: 0
Views: 429

Different Latency between Ping and Traceroute

Dear all,
I am having issues with my network. When I ping my gateway, I get reply ~1-2ms but when I traceroute I get ~100ms. What could be the problem?
by arjuneu
Sat Dec 30, 2017 1:35 pm
Forum: General
Topic: multiple NAS help
Replies: 2
Views: 374

Re: multiple NAS help

Radius Server is reachable from all of the mikrotiks. But radius authentication is not working.
by arjuneu
Thu Dec 28, 2017 6:14 am
Forum: General
Topic: multiple NAS help
Replies: 2
Views: 374

multiple NAS help

Hello forum members,
I have my network setup as follows. I want to all 3 routerboards to authenticate users from central radius server.
How can i accomplish that without bridging the interfaces.
by arjuneu
Fri Dec 22, 2017 6:41 pm
Forum: General
Topic: CCR 1016-12G CPU maxed out
Replies: 1
Views: 395

CCR 1016-12G CPU maxed out

Hello forum members, I am using CCR1016-12G as a PPPoE server with around 450 customers. There is ~350 mbps throughput having 500 simple queues, 12 queue tree, 2 filter rules, 13 NAT rules and 13 mangle rules. But when the traffic is ~200 mbps the CPU usage is CPU load is ~20-25% having same queues ...
by arjuneu
Sun Feb 12, 2017 12:39 pm
Forum: General
Topic: Is my RB1100ahx2 dead?
Replies: 8
Views: 1196

Re: RE: Re: Is my RB1100ahx2 dead?

Check bad blocks from system > resources Sent from my C6833 using Tapatalk The board doesn't even boot ... how to check for bad blocks. Again repair router with netinstall and check bad blocks. If you can access routerboot from serial console try formating nand Now, I can't access router via netins...
by arjuneu
Sat Feb 11, 2017 5:50 pm
Forum: General
Topic: Is my RB1100ahx2 dead?
Replies: 8
Views: 1196

Re: Is my RB1100ahx2 dead?

Check bad blocks from system > resources

Sent from my C6833 using Tapatalk
The board doesn't even boot ... how to check for bad blocks.
by arjuneu
Sat Feb 11, 2017 5:47 pm
Forum: General
Topic: Is my RB1100ahx2 dead?
Replies: 8
Views: 1196

Re: Is my RB1100ahx2 dead?

Connect serial port and see what is happening. But does not look good. Any broken capicitors on the circuit board?

Verstuurd vanaf mijn D5803 met Tapatalk
No broken capacitors, will get serial cable tomorrow n check what happens
by arjuneu
Sat Feb 11, 2017 5:07 pm
Forum: General
Topic: Is my RB1100ahx2 dead?
Replies: 8
Views: 1196

Re: Is my RB1100ahx2 dead?

Check powersuply with load. Stable Power is most important of all.

Verstuurd vanaf mijn D5803 met Tapatalk
I also tried giving power with PoE on ether13 .. but didn't help
by arjuneu
Sat Feb 11, 2017 3:49 pm
Forum: General
Topic: Is my RB1100ahx2 dead?
Replies: 8
Views: 1196

Is my RB1100ahx2 dead?

Suddenly, today my RB1100ahx2 stopped working. I recovered by netinstal. But after 2 hours of uptime, it again stopped working. But this time, only the power led is blinking, no user led blinking, no activity on ether port. This time, I am unable to do netinstall. Currently, I don't have console cab...
by arjuneu
Tue Jan 10, 2017 3:59 pm
Forum: General
Topic: Is my SXT dead?
Replies: 2
Views: 436

Re: Is my SXT dead?

Hi
It is possible some electric discharge could damage router os

If you have a backup you can try netinstall to have a fresh RouterOS.
I tried netinstall but the SXT doesn't power ups. So, no chance of netinstall.
by arjuneu
Tue Jan 10, 2017 10:53 am
Forum: General
Topic: Is my SXT dead?
Replies: 2
Views: 436

Is my SXT dead?

My RB SXT 2HnD is working fine till this morning. But suddenly it stopped working. When I checked, there is no power in the SXT. I tried changing the power adapter but no power. But I noticed that some times the power led blinks for 2 or 3 times.
by arjuneu
Sat Nov 12, 2016 4:25 pm
Forum: Beginner Basics
Topic: RB downloading something itself
Replies: 0
Views: 333

RB downloading something itself

Today I faced a problem that SXT is downloading something itself. I have attached the torch report. Please have a look at it.

I had setup this SXT as Home Router with Firewall on.
by arjuneu
Thu Nov 10, 2016 1:49 pm
Forum: General
Topic: Policy Routing Problem
Replies: 3
Views: 524

Re: Policy Routing Problem

Hello in Ip - route And Rule tab you can write a rule for drop this traffic Sent from my SM-G900FD using Tapatalk I think you misunderstood my problem. Currently only the clients having IPs 192.168.1.0/24 can access the server. The clients having IPs 192.168.2.0/24 also have to access the server. C...
by arjuneu
Wed Nov 09, 2016 3:51 pm
Forum: General
Topic: Policy Routing Problem
Replies: 3
Views: 524

Policy Routing Problem

I have setup the network as shown in the figure. 192.168.2.0/24 gets internet via WAN2 192.168.1.0/24 gets internet via WAN1 (Policy Routing) The problem is that, I have to get access to the Server having static IP 192.168.1.x/24 from the any of the clients. The clients having IPs 192.168.1.0/24 can...
by arjuneu
Mon Dec 28, 2015 12:57 pm
Forum: General
Topic: RB1100AHx2 uploading someting itself.
Replies: 4
Views: 659

Re: RB1100AHx2 uploading someting itself.

Check your DNS cache, and web-proxy aren't open to Internet.
A torch that includes ports will be more helpful.
Thanks,
It was DNS, I had set "allow-remote-requests" to yes.
by arjuneu
Mon Dec 28, 2015 12:29 pm
Forum: General
Topic: RB1100AHx2 uploading someting itself.
Replies: 4
Views: 659

RB1100AHx2 uploading someting itself.

Hello Forum Members,

I have noticed that after installing RB1100AHx2, it us uploading something up and consuming my whole upload bandwidth. Can anyone suggest me something.

The below pics are of two 1100AHx2.

The torch report is of 2nd rb.
Regards,
Arjun Neupane
by arjuneu
Thu May 07, 2015 9:18 am
Forum: General
Topic: View tx/rx without specific ip
Replies: 1
Views: 441

View tx/rx without specific ip

Hello All

In Nepal we provide unlimited bandwidth for some specific ips. But the problem is that I can't find the bandwidth excluding those ips. Is there any way to view the bandwidth excluding those ips.

Like in the attached picture. The RX from my WAN is with those unlimited ips.
by arjuneu
Wed Jan 21, 2015 4:35 am
Forum: General
Topic: Routing Public IP
Replies: 5
Views: 1172

Re: Routing Public IP

Solved my problem.
I talked to my ISP and they gave me a link IP address for WAN. I just added a /29 address in my LAN.

I gave clients the remaining ips with my LAN IP as gateway.
by arjuneu
Sun Jan 18, 2015 5:00 am
Forum: General
Topic: Routing Public IP
Replies: 5
Views: 1172

Routing Public IP

Hello forum members, My ISP gave me a /29 ip block i.e aa.bbb.cc.209/29. I used .210/29 in my mikrotik WAN and .209 as gateway. Now, I want to give my clients the remaining IPs i.e. .211, 212, 213, 214. I can't also bridge the LAN & WAN because I am already giving private IPs to the client. Now, som...
by arjuneu
Sat Dec 20, 2014 3:13 pm
Forum: General
Topic: Double NAT problem.....Any Suggestions.
Replies: 4
Views: 1105

Re: Double NAT problem.....Any Suggestions.

Ok, I'll have a try with openwrt or dd-wrt.
by arjuneu
Sat Dec 20, 2014 11:57 am
Forum: General
Topic: Double NAT problem.....Any Suggestions.
Replies: 4
Views: 1105

Re: Double NAT problem.....Any Suggestions.

Wouldn't be better to change the tplink by mikrotik device? Or install openwrt into it?
Can't I do anything from my mikrotik.. like routing without NAT.
by arjuneu
Sat Dec 20, 2014 9:01 am
Forum: General
Topic: Double NAT problem.....Any Suggestions.
Replies: 4
Views: 1105

Double NAT problem.....Any Suggestions.

Hello all, I have a network as in the picture. I want to remove NAT from my mikrotik. I know NAT in the TP-LINK router cannot be removed. Is there is an way to remove NAT from my mikrotik? If yes, how, please explain with ros codes. The double NAT is causing problems in the apps like viber and so on...
by arjuneu
Sat Dec 20, 2014 7:12 am
Forum: Forwarding Protocols
Topic: Routing without NAT...
Replies: 3
Views: 1721

Re: Routing without NAT...

Yes. Routing without nat is the main feature of router.
How to accomplish that?
Can you please send me the codes.
by arjuneu
Fri Dec 19, 2014 9:59 am
Forum: Forwarding Protocols
Topic: Routing without NAT...
Replies: 3
Views: 1721

Routing without NAT...

Hello all, I am newbie to the mikrotik routing. I want to route through mikrotik without nat. Can I accomplish it? I am currently connecting to my ISP via PPPoE. Also, I am providing my users via PPPoE server. Due to two PPPoE connections, I am facing double NAT in my network. If there is an anyway ...
by arjuneu
Fri Dec 12, 2014 6:37 am
Forum: General
Topic: force users to use youtube in https
Replies: 2
Views: 790

Re: force users to use youtube in https

proxy redirect.
can you please provide me the script.
by arjuneu
Tue Dec 09, 2014 5:56 am
Forum: General
Topic: force users to use youtube in https
Replies: 2
Views: 790

force users to use youtube in https

I want my users to use youtube only via port 443 not 80.

How can I do this?
by arjuneu
Wed Nov 26, 2014 12:53 pm
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Re: Double NAT in my network

Waiting for reply...........
by arjuneu
Sun Nov 23, 2014 5:08 am
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Re: Double NAT in my network

And is the tplink able to route without natting? If not, you have to deliver public ip on its wan port. I guess you would have not enough public ips to do that. Maybe the tplink supports bridge mode... This router is a low cost router, so It doesn't supports bridge mode and not able to route withou...
by arjuneu
Sat Nov 22, 2014 6:52 am
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Re: Double NAT in my network

I understand that the second device is not at your possession because it belongs to your client. Is this right?
Yes, it belongs to the clients but I have full access to the client's router. They are all TP-LINK TL-WR470N.
by arjuneu
Fri Nov 21, 2014 1:50 pm
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Re: Double NAT in my network

What is wrong on nat at clients device? He has also full right to protect his network.
Can you suggest me something to remove double NAT?
by arjuneu
Fri Nov 21, 2014 4:31 am
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Re: Double NAT in my network

The best way to solve it is routing your network. You can route creating static routes in your router and client router or maybe you can active dynamic routing protocols like OSPF. Adding NAT in every routers it's not necessary inside your network. Only it's necessary on your service provider inter...
by arjuneu
Thu Nov 20, 2014 3:04 pm
Forum: General
Topic: Double NAT in my network
Replies: 12
Views: 2770

Double NAT in my network

Hello all,

I am facing double NAT in my network. Is there any way to remedy it?

I get public ip from my ISP,

1st NAT in my mikrotik.
2nd NAT in my client's router.

I am using PPPoE for clients.

Waiting for answers.............
by arjuneu
Sat Nov 01, 2014 8:05 am
Forum: General
Topic: PPPoE not showing RX in simple queue
Replies: 0
Views: 505

PPPoE not showing RX in simple queue

I am serving a PPPoE server.
My config...
PPPoE server over Bridge (LAN-B)
ip pool: 45.19.5.2-45.19.5.254
by arjuneu
Mon Oct 06, 2014 8:37 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Re: Can't access CPE from PC.

In this case you need to MASQUERADE to the WAN interface IP. Your CPE is probably accepting only connections in the proper IP range.

Thanks for the help. Its working now......
by arjuneu
Mon Oct 06, 2014 8:33 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Re: Can't access CPE from PC.

Try add a reverse rule, too:
chain=forward action=accept protocol=tcp src-address=172.18.34.153 dst-address=10.55.0.1

Or to start with, open complete forwarding from WAN to LAN and back for all protocols and ports. Filter later more precise...

Its not working..
by arjuneu
Mon Oct 06, 2014 8:28 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Re: Can't access CPE from PC.

Can you ping, or telnet/ssh to the CPE from your router?
Yes, I can ping CPE from Mikrotik.
by arjuneu
Mon Oct 06, 2014 8:23 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Re: Can't access CPE from PC.

The route is there, since the WAN port is in the same subnet as the CPE. What is probably missing are the forward rules allowing traffic from 10.55.0.1 to 172.18.34.xx and back. I have added the forward rule and its counting packets but can't access the cpe. chain=forward action=accept protocol=tcp...
by arjuneu
Mon Oct 06, 2014 8:16 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Re: Can't access CPE from PC.

Route is missing. Is cpe yours or does it belong to the provider? Maybe it has rule that disables access from wrong ways.

CPE belongs to me. I have configured the CPE myself. Can you please post me the route??
by arjuneu
Mon Oct 06, 2014 7:46 am
Forum: General
Topic: Can't access CPE from PC.
Replies: 11
Views: 1814

Can't access CPE from PC.

My network is as following.

I can't access CPE from my PC.

Any suggestion.
by arjuneu
Mon Sep 29, 2014 5:27 pm
Forum: General
Topic: Viber not connecting behind router
Replies: 4
Views: 1358

Re: Viber not connecting behind router

My NAT config add action=redirect chain=dstnat disabled=no dst-address-list=!Server dst-address-type="" \ dst-port=80 hotspot="" protocol=tcp src-address=20.55.0.0/16 to-ports=9090 add action=accept chain=pre-hotspot disabled=no dst-address-type=!local hotspot=auth \ in-interface=LAN add action=masq...
by arjuneu
Mon Sep 29, 2014 2:22 pm
Forum: General
Topic: Viber not connecting behind router
Replies: 4
Views: 1358

Re: Viber not connecting behind router

My network is like as in the fig.
by arjuneu
Sun Sep 28, 2014 9:06 am
Forum: General
Topic: Viber not connecting behind router
Replies: 4
Views: 1358

Viber not connecting behind router

Hello All, I have a situation here. In my network, internet is fine all working but viber is not connecting only behind router. When client connects to my AP it's working fine. but when connected behind router it doesn't work. Also, I get public ip from my ISP through PPPoE. Waiting for suggestions!...
by arjuneu
Wed Sep 24, 2014 6:21 am
Forum: General
Topic: Viber not working??
Replies: 3
Views: 1909

Re: Viber not working??

I don't know Viber, but Triple NAT is certainly not helping. Maybe you need port-forwarding on all these routers for Viber to work. Can you please send me the script. I have two WAN. Both are PPPoE client. I have set the following config.. add action=dst-nat chain=dstnat comment=PPP disabled=no dst...
by arjuneu
Tue Sep 23, 2014 4:29 pm
Forum: General
Topic: Viber not working??
Replies: 3
Views: 1909

Re: Viber not working??

No answer till now... Is there no one having this problem?

Is this due to triple nat?.
by arjuneu
Sun Sep 21, 2014 9:26 am
Forum: General
Topic: Viber not working??
Replies: 3
Views: 1909

Viber not working??

Hello All,

I have a network problem with viber only. All are working fine (skype, facebook and other). But viber is not connecting to the internet. When registering the phone, it says "Internet Connection required for registration". My network is as on the figure.
by arjuneu
Tue Sep 16, 2014 6:01 am
Forum: General
Topic: "errors" edit for Radius...
Replies: 3
Views: 814

Re: "errors" edit for Radius...

Thanks arjuneu, If you want to put me at the first road of freeradius, where do you advice to start?
Freeradius as backend and Daloradius as frontend with mysql. Search google, you will find install instructions.
by arjuneu
Mon Sep 15, 2014 6:27 am
Forum: General
Topic: "errors" edit for Radius...
Replies: 3
Views: 814

Re: "errors" edit for Radius...

errors.txt is only for hotspot local users. You have to change the radius server error message. I don't think userman supports this feature. I suggest to use freeradius.
by arjuneu
Wed Sep 10, 2014 3:21 pm
Forum: Wireless Networking
Topic: SXT G-2HnD Repeater
Replies: 6
Views: 2079

Re: SXT G-2HnD Repeater

It works with AirMax enabled in UBNT and Nstreme enabled in Mikrotik.
by arjuneu
Thu Aug 28, 2014 4:31 am
Forum: Wireless Networking
Topic: Low cost WISP system
Replies: 15
Views: 2998

Re: Low cost WISP system

Everyone is saying that 2.4ghz causes interference.
If AP and CPE is set to superchannel like 2312, 2732, Does it causes interference?
5ghz devices are more expensive than 2.4ghz.
by arjuneu
Wed Aug 27, 2014 2:41 pm
Forum: General
Topic: Load balance PCC with ppoe problem
Replies: 9
Views: 2323

Re: Load balance PCC with ppoe problem

You have a wrong setup in the mangle rule. Change in interface in the pcc rule to in interface your lan network
The posted configuration is working for me.
by arjuneu
Wed Aug 27, 2014 8:06 am
Forum: General
Topic: Load balance PCC with ppoe problem
Replies: 9
Views: 2323

Re: Load balance PCC with ppoe problem

by arjuneu
Tue Aug 26, 2014 11:15 am
Forum: Wireless Networking
Topic: Low cost WISP system
Replies: 15
Views: 2998

Re: Low cost WISP system

How much speed do you want to provide to the customers ? 2 Mbps max. You can use Metal-2SHPn as AP and SXT Lite2 as WISP client. I think the coverage with both devices will be around 3km. If clear LOS 5-6 km. Which type of antenna for this device ? It just a router board. What is the expected price...
by arjuneu
Mon Aug 25, 2014 2:34 pm
Forum: Wireless Networking
Topic: Low cost WISP system
Replies: 15
Views: 2998

Re: Low cost WISP system

You can use Metal-2SHPn as AP and SXT Lite2 as WISP client. I think the coverage with both devices will be around 3km. If clear LOS 5-6 km.
by arjuneu
Sun Aug 17, 2014 1:40 pm
Forum: General
Topic: RADIUS Opinions
Replies: 13
Views: 3186

Re: RADIUS Opinions

I use DMA Softlab Radius Manager. Its a good radius server.
by arjuneu
Fri Aug 15, 2014 1:16 pm
Forum: General
Topic: Two PPPoE Client
Replies: 0
Views: 374

Two PPPoE Client

Hello All, I got two username and password from my ISP. But my ISP don't allows multiple login from same MAC. I am connecting one via Bridge. Other don't connect with ethernet interface. Is there anyway to login two PPPoE clients at same time. Like VLAN or other. Any suggestions? MY Interfaces; LAN ...
by arjuneu
Thu Aug 14, 2014 4:32 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

Arjun Dost... do you work for an ISP????
Nope. I'm a freelancer.
by arjuneu
Wed Aug 13, 2014 9:31 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

wow Arjun Dost its working.....
give karma if it helps.
by arjuneu
Tue Aug 12, 2014 9:51 am
Forum: General
Topic: Mikrotik PPPoE client disconnect with radius.
Replies: 2
Views: 1318

Re: Mikrotik PPPoE client disconnect with radius.

Use disconnection method to remote in DMA. ALSO, use api.
by arjuneu
Tue Aug 12, 2014 9:48 am
Forum: General
Topic: pppoe and consumer wifi
Replies: 1
Views: 756

Re: pppoe and consumer wifi

Hello, we have a client who is running a pppoe server on a ccr 1016 on 6.18. his pppoe clients connect fine but those using a wifi router cannot connect. mtu set to 1488 and on client wifi, mtu is set to auto; they have tried with 1480 as well. pppoe server authentication protocol is pap one sessio...
by arjuneu
Tue Aug 12, 2014 9:39 am
Forum: Beginner Basics
Topic: Simple Queue does not work with Hotpspot
Replies: 11
Views: 2769

Re: Simple Queue does not work with Hotpspot

i'm sorry to inform you that it is not working. I have hotspot activated so I want to give unlimit bandwidth to cache contents. your one is only for simple queue clients. Limitation on hotspot also uses the simple queue. I'm currently running Hotspot and PPPoE on same interface. This script works f...
by arjuneu
Tue Aug 12, 2014 9:35 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

Your mangle rule should be in forward chain, not output.
Its working for me with output chain.

I'm using IP 10.55.0.1
by arjuneu
Tue Aug 12, 2014 6:05 am
Forum: Beginner Basics
Topic: Simple Queue does not work with Hotpspot
Replies: 11
Views: 2769

Re: Simple Queue does not work with Hotpspot

it works thank you so much. now how i can give them unlimited bandwidth to cache contents ? i already configured below but i think it is not working name="unlimitcache" parent=global packet-mark=cache-hits limit-at=0 queue=default priority=8 max-limit=0 burst-limit=0 burst-threshold=0 burst-time=0s...
by arjuneu
Tue Aug 12, 2014 5:42 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

Ummm everything seems fine but still i could not get it....... am i missing something????????? Where is the "mark-connection" rule in mangle? Try the below code removing your existing rule. add action=mark-connection chain=prerouting comment="Youtube" \ disabled=no layer7-protocol=streaming new-con...
by arjuneu
Mon Aug 11, 2014 5:31 pm
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

First i have created hotspot and users with 64k internet speed and unlimited data. Then i have added these code and after that i have tested the hotspot in my laptop. While using internet it works fine according to the limit but not good for youtube. /ip firewall layer7-protocol add name=streaming ...
by arjuneu
Sat Aug 09, 2014 10:01 am
Forum: Wireless Networking
Topic: Metal 2SHPn with TP-LINK Antenna
Replies: 2
Views: 1026

Re: Metal 2SHPn with TP-LINK Antenna

If frequency and connectors fit, it's compatible.
Thank you for your reply. I now know it's compatible.
by arjuneu
Sat Aug 09, 2014 6:57 am
Forum: Wireless Networking
Topic: Metal 2SHPn with TP-LINK Antenna
Replies: 2
Views: 1026

Metal 2SHPn with TP-LINK Antenna

Hello Forum,

I am intending to use TP-LINK Omni Antenna (TL-ANT2415D) with Metal 2SHPn. Is Metal compatible with TP-LINK Antenna.
by arjuneu
Sat Aug 09, 2014 6:36 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

Arjun dost can you give me your mobile number........ i am also from Nepal...... Lekhnath,Kaski Nepal...... ummmm i need to ask you something more........
9845369090
by arjuneu
Fri Aug 08, 2014 4:32 pm
Forum: General
Topic: Queue Tree
Replies: 1
Views: 493

Re: Queue Tree

Hi, I have R.B 1100 and I have 20M bandwidth and I use simple queue in bandwidth limit . I want Separation of bandwidth between youtube and other web . for example : I limit 1M for other web and limit 2M for youtube. can I use this idea and it is work with simple queue .I think it is in queue tree ...
by arjuneu
Fri Aug 08, 2014 4:25 pm
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

How did you do that arjuneu ...... i mean i have created hotspot and everything works according to the limit except youtube...... first i have created hotspot and then added the script then i created users but youtube still has problem....... Please post your config. I'll have a look at it. Which R...
by arjuneu
Thu Aug 07, 2014 5:38 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

didn't worked in hotspot.... have you tested it in hotspot? It's working for me. I am currently running Hotspot, PPPoE and Static IP Network on same interface. Try to modify the mangle rule adding src-address-list /ip firewall address-list add address=x.x.x.x/x disabled=no list=LAN (your LAN IP or ...
by arjuneu
Wed Aug 06, 2014 6:45 pm
Forum: General
Topic: How to manage bandwidth youtube with Layer 7?
Replies: 7
Views: 6852

Re: How to manage bandwidth youtube with Layer 7?

Hi, what is the speed will clients will get for youtube? sorry I am beginner in Mikrotik. thank you, Ven ip firewall layer7-protocol add name=streaming regexp=videoplayback|video /ip firewall mangle add action=mark-connection chain=prerouting comment="Youtube_ Client" \ disabled=no layer7-protocol=...
by arjuneu
Tue Aug 05, 2014 10:04 am
Forum: Beginner Basics
Topic: RB750 hotspot setup problem
Replies: 11
Views: 3482

Re: RB750 hotspot setup problem

Hi, It's working when I configure get DHCP from Mikrotik.

But when can i disable multiple login?

http://i1song.com/mikrotik/6.jpg
Using a wifi router is causing your problem. Switch to AP from router. I recommend UBNT NSM2 or Mikrotik SXT G-2HnD.
by arjuneu
Tue Aug 05, 2014 8:23 am
Forum: General
Topic: How to manage bandwidth youtube with Layer 7?
Replies: 7
Views: 6852

Re: How to manage bandwidth youtube with Layer 7?

Have a look at it. Its just only for youtube.

http://radiusm.blogspot.com/2014/08/you ... rotik.html
by arjuneu
Tue Aug 05, 2014 8:18 am
Forum: Beginner Basics
Topic: RB750 hotspot setup problem
Replies: 11
Views: 3482

Re: RB750 hotspot setup problem

Cabletech, Please find below setup: http://i1song.com/mikrotik/1.jpg http://i1song.com/mikrotik/2.jpg http://i1song.com/mikrotik/3.jpg http://i1song.com/mikrotik/4.jpg http://i1song.com/mikrotik/5.jpg I try many time, still can not fix the problem. if have one user login the after user no need logi...
by arjuneu
Tue Aug 05, 2014 8:07 am
Forum: Scripting
Topic: Userman Youtube Help
Replies: 24
Views: 5717

Re: Userman Youtube Help

does any one have any solution to this porblem.... or how can we solve this?????????
This might help you.

http://radiusm.blogspot.com/2014/08/you ... rotik.html
by arjuneu
Mon Aug 04, 2014 9:47 am
Forum: Beginner Basics
Topic: merge two ADSL
Replies: 2
Views: 676

Re: merge two ADSL

by arjuneu
Wed Jul 09, 2014 6:15 am
Forum: Wireless Networking
Topic: SXT G-2HnD Repeater
Replies: 6
Views: 2079

Re: SXT G-2HnD Repeater

Yes, it is possible. http://wiki.mikrotik.com/wiki/Wireless_repeater

Your SXT have License level - 4 :) http://routerboard.com/RBSXTG2HnD

In the script it says that we need two WLAN, but my SXT have only one WLAN.
by arjuneu
Tue Jul 08, 2014 5:28 pm
Forum: Wireless Networking
Topic: SXT G-2HnD Repeater
Replies: 6
Views: 2079

SXT G-2HnD Repeater

Hello all,

Is there any way to setup SXT G-2HnD as repeater. I am intending to repeat from UBNT NSM2. Is it possible?

If possible, please provide me the script.
by arjuneu
Tue Jun 03, 2014 4:47 am
Forum: General
Topic: PPP and Hotspot.... Same IP Range
Replies: 4
Views: 974

Re: PPP and Hotspot.... Same IP Range

Do you have a bridge configured for the PPP interfaces?

No, PPP and Hotspot are in same interface.
by arjuneu
Sun Jun 01, 2014 7:33 am
Forum: General
Topic: PPP and Hotspot.... Same IP Range
Replies: 4
Views: 974

Re: PPP and Hotspot.... Same IP Range

Are you setting the rate limit in the profile of the PPP connection? No, I have set ppp profile unlimited. I am using DMA Softlab RM for user authentication and accounting as well as bandwidth management. And the queues are there with bandwidth limit. But they aren't working. No transfer from the q...
by arjuneu
Sat May 31, 2014 6:15 am
Forum: General
Topic: PPP and Hotspot.... Same IP Range
Replies: 4
Views: 974

PPP and Hotspot.... Same IP Range

Hello all,

I am trying to setup PPP and hotspot in same ip range. All is working fine. But PPP queues aren't working. That means PPP clients are getting bandwidth without speed limit.


My setup;

Server IP Hotspot and PPP: 10.55.15.1

IP Pool:
10.55.15.1/16

Is there anyway to manage it?
by arjuneu
Thu Oct 10, 2013 7:05 am
Forum: General
Topic: Scheduler Question
Replies: 2
Views: 637

Scheduler Question

Hello,
Is there an option to run a scrip only 6 days a week?

I need this soon.
by arjuneu
Fri Oct 04, 2013 1:34 pm
Forum: General
Topic: Good Wireless Connectivity but Crapy Internet
Replies: 1
Views: 571

Good Wireless Connectivity but Crapy Internet

Hello there, I have a good wireless connection about 50mbps. with singal -66~-70, signal to noise 30~40 and CCQ ~85%. When I ping to the mikrotik (x86) ping is 4~6ms and 1~2 packet loss in 40~50 packets. But When I try to ping google or facebook. ping is ~2000ms and 5-7 packets loss in ~15 packets. ...
by arjuneu
Wed Oct 02, 2013 6:28 am
Forum: Wireless Networking
Topic: Mikrotik with TP-LINK
Replies: 3
Views: 2625

Re: Mikrotik with TP-LINK

Yes, I tried that and it worked.

But, I have set 3 TP-LINK as repeater to extend the wireless coverage and it's not working.

Log says, connected, is AP, wants WDS.

I can't have connection.
What I have to do for it?
by arjuneu
Mon Sep 30, 2013 4:36 pm
Forum: Wireless Networking
Topic: Mikrotik with TP-LINK
Replies: 3
Views: 2625

Mikrotik with TP-LINK

hello,
I am intending to use RB SXT G-2HnD as AP and TP-LINK TL-WA5210G as CPE. Does it supports WDS??
by arjuneu
Mon Sep 30, 2013 2:23 pm
Forum: Wireless Networking
Topic: TX Power of SXT G-2HnD
Replies: 3
Views: 1273

TX Power of SXT G-2HnD

Hello,

Is there any way to change the TX power of SXT G-2HnD. I am using as AP with ROS 5.25
by arjuneu
Thu Aug 15, 2013 5:49 am
Forum: General
Topic: Queue Tree Help Needed......
Replies: 2
Views: 530

Re: Queue Tree Help Needed......

Thanks for the help.
by arjuneu
Fri Aug 09, 2013 6:40 am
Forum: General
Topic: Queue Tree Help Needed......
Replies: 2
Views: 530

Queue Tree Help Needed......

Hello all, I have set my users to have unlimited bandwidth for youtube. Mangle action=mark-connection chain=postrouting comment=Youtube content=flv disabled=no new-connection-mark=youtube passthrough=yes protocol=tcp action=mark-packet chain=postrouting connection-mark=youtube disabled=no new-packet...
by arjuneu
Wed Jul 17, 2013 5:38 am
Forum: The User Manager
Topic: UM Generates the report for just first 20 users.............
Replies: 2
Views: 1478

UM Generates the report for just first 20 users.............

Hello all,

I am currently using ROS v5.18 (x86) with UM.

When I generate the report. It generates the report of first 20 users. It doesn't generate the report for users more than 20.

What is the problem. Is is a bug or something.
by arjuneu
Sun Jul 14, 2013 8:47 am
Forum: Beginner Basics
Topic: PC routeros... How many users?
Replies: 1
Views: 520

PC routeros... How many users?

I am intending to install ROS in old pc. How many users can it handle or how much bandwidth? Motherboard: Intel 845HV CPU: Intel Pentium 4 2GHz RAM: 512 MB SD HDD: MDT 80 GB PATA I am willing to run PPPoE and Hotspot with mikrotik Web proxy, userman and around 20 filter rules, 30 nat rules, 20 mangl...
by arjuneu
Thu Jul 11, 2013 9:53 am
Forum: The User Manager
Topic: Activate Hotspot Local user after UM user is expired???
Replies: 2
Views: 1667

Re: Activate Hotspot Local user after UM user is expired???

Not possible, via UM. Once the user account is expired, there is no mechanism in UM that can enable the local user. Perhaps with some scripting , maybe its possible. But I am not sure. What is the goal exactly behind this idea? If you share it , maybe someone will give you any workaround. The goal ...
by arjuneu
Tue Jul 09, 2013 10:20 am
Forum: The User Manager
Topic: Activate Hotspot Local user after UM user is expired???
Replies: 2
Views: 1667

Activate Hotspot Local user after UM user is expired???

hello all, I want to activate the user in local hotspot after the user is expired in UM. Like: I have user "test" in the UM for 30 days. After 30 days the user "test" will be expired. I also have created the same user "test" in local hotspot but disabled. After the user is expired, I want to enable ...
by arjuneu
Sat Jul 06, 2013 10:29 am
Forum: The Dude
Topic: admin password protection
Replies: 3
Views: 1368

Re: admin password protection

ya i tried it but entirely they cant log in i ask like read permission
Create a group with read permission in groups n assign that group for that user.
by arjuneu
Fri Jul 05, 2013 2:05 pm
Forum: Scripting
Topic: IP Address list logging
Replies: 5
Views: 1340

Re: IP Address list logging

I suppose you are adding those addresses to the address list using script? Nope, I have firewall filters that add src addresses to address lists automatically, for example.. chain=input action=add-src-to-address-list protocol=tcp psd=21,3s,3,1 address-list=ps03 address-list-timeout=2w But there are...
by arjuneu
Fri Jul 05, 2013 2:01 pm
Forum: The Dude
Topic: admin password protection
Replies: 3
Views: 1368

Re: admin password protection

hi friends i m using rb750 in this i m control the bandwidth every time i monitor the bandwidth other then me three of us know the admin password i like to lock the admin password so give me some ideas like access denied r protected message the admin password should given to them so i need your hel...
by arjuneu
Fri Jul 05, 2013 4:54 am
Forum: General
Topic: Dual WAN ... HELP Needed!!!!
Replies: 2
Views: 776

Re: Dual WAN ... HELP Needed!!!!

Post /export compact so everyone can see what you have done. ip firewall mangle add action=mark-routing chain=prerouting comment="Youtube via WS" dst-address-list=\ youtube_ips dst-port=80 new-routing-mark=youtube_route protocol=tcp system script add name=youtube-script policy=ftp,reboot,read,write...
by arjuneu
Sun Jun 30, 2013 8:52 am
Forum: General
Topic: Dual WAN ... HELP Needed!!!!
Replies: 2
Views: 776

Dual WAN ... HELP Needed!!!!

I have two WAN connections.

1. PPPoE (2mbps)
2. Static IP (1mbps) (Unlimited Bandwidth for Youtube)

I want to route youtube via the second WAN (static IP), but i can't.

Please somebody help me out.

I have tried this...
http://adminsline.wordpress.com/2012/08 ... k-youtube/
by arjuneu
Thu Apr 04, 2013 4:17 pm
Forum: General
Topic: youtube in multiple WAN
Replies: 2
Views: 2075

Re: youtube in multiple WAN

Thanks, But this is not working,..... The mangle rule is working well. but the routing is done by the default WAN link. [admin@greenTIK]/ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=x.y.z.w routing-mark= YOUTUBE_RT scope=255 target-scope=10 in gateway I don't have ip address... ...
by arjuneu
Fri Sep 07, 2012 8:10 am
Forum: The User Manager
Topic: Logging UM login
Replies: 5
Views: 1783

Re: Logging UM login

do you wann to configure um with hotspot
I have set access to UM before hotspot login. So I want to log what username is typed in the um. Just like the logs in UM. but it can be shown in MT log.
I have already configured UM with hotspot. Now, I want to log UM logins before hotspot login.
by arjuneu
Wed Sep 05, 2012 4:42 am
Forum: The User Manager
Topic: Logging UM login
Replies: 5
Views: 1783

Re: Logging UM login

I have set access to UM before hotspot login. So I want to log what username is typed in the um. Just like the logs in UM. but it can be shown in MT log.
by arjuneu
Thu Aug 30, 2012 9:31 am
Forum: The User Manager
Topic: Logging UM login
Replies: 5
Views: 1783

Logging UM login

Hello
I want to log usermanager login by users... or login attempt into the usermanger
Is it possible.
by arjuneu
Fri Aug 24, 2012 3:31 pm
Forum: General
Topic: UM before hotspot login URGENT
Replies: 4
Views: 682

Re: UM before hotspot login URGENT

Put the UM router ip address in the walled garden
/ip hotspot walled-garden ip
add dst-address=xx.xx.xx.xx action=accept

It doesn't work. It says "404 error not found."

My UM IP is 10.55.15.1:8080/userman

webproxy running in port 9090
by arjuneu
Fri Aug 24, 2012 3:15 pm
Forum: General
Topic: UM before hotspot login URGENT
Replies: 4
Views: 682

UM before hotspot login URGENT

Hello

I want to allow the users to access usermanager before hotspot login to check their account status.

If it is possible. I need it urgently.
by arjuneu
Fri Aug 24, 2012 6:39 am
Forum: General
Topic: youtube in multiple WAN
Replies: 2
Views: 2075

youtube in multiple WAN

hello all

I have two WAN connections. One is providing me unlimited bandwidth for youtube. so I want to redirect all traffic to youtube via the that connection.

Both wan connections are PPPoE Client.

is it possible?
by arjuneu
Wed Jul 25, 2012 10:12 am
Forum: General
Topic: squid proxy!!! need help..
Replies: 9
Views: 1910

Re: squid proxy!!! need help..

when you visit whatismyip.com is it showing you actual local ip?? and may i know for client billing what application are you using?? we have developed a billing software for mikrotik it's raduis based and uses squid to accelerate web browsing you can view connection log of users, sites visited, set...
by arjuneu
Wed Jul 25, 2012 10:09 am
Forum: General
Topic: squid proxy!!! need help..
Replies: 9
Views: 1910

Re: squid proxy!!! need help..

thanks.. it works!!! HI Arjune Would you mine if you share your mikrotik config and script config in squid please send to my email myron@iwantlemonjuice.com Thank You I am just using the squid for testing purpose. Currently I am using mikrotik built in web-proxy server... you can find the squid con...
by arjuneu
Sun Jul 22, 2012 4:08 am
Forum: General
Topic: Webfig skins (tutorial)
Replies: 100
Views: 97092

Re: Webfig skins (tutorial)

Is there anyway to remove or add the columns... like in winbox.
by arjuneu
Sun Jul 22, 2012 3:59 am
Forum: General
Topic: squid proxy!!! need help..
Replies: 9
Views: 1910

Re: squid proxy!!! need help..

thanks.. it works!!!
by arjuneu
Wed Jul 18, 2012 4:16 pm
Forum: General
Topic: squid proxy!!! need help..
Replies: 9
Views: 1910

squid proxy!!! need help..

Can anyone help me....
by arjuneu
Fri Jun 08, 2012 5:13 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 438
Views: 311850

Re: Sample Hotspot Page - Sticky Please

This is my simple one........
by arjuneu
Tue May 22, 2012 5:46 pm
Forum: General
Topic: Hotspot Error Message
Replies: 6
Views: 4022

Re: Hotspot Error Message

I just want to change the error message in hotspot error message sent by UM. Like "no valid profile found" to "your account has expired" and so on. Not the interface language of UM.
by arjuneu
Sat May 19, 2012 5:34 am
Forum: General
Topic: Notify users about their expiry date....
Replies: 2
Views: 787

Notify users about their expiry date....

Hello all, Is there anyway to notify hotspot users that their account will expire in 5 days, 4 days, 3 days, 2 days and 1 day. If it is possible, please send me the script for alogin.html. I use UM as radius server. I have users only in UM not in local hotspot server. and other thing is it possible ...
by arjuneu
Sat May 05, 2012 5:11 pm
Forum: The User Manager
Topic: Voucher with Serial Numbers !
Replies: 62
Views: 38090

Re: Voucher with Serial Numbers !

This is mine. <html> <head> <meta http-equiv="Content-Language" content="en-us"> <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"> <title>Voucher</title> <meta name="description" content="Voucher"> <meta name="Microsoft Theme" content="none, default"> </head> <table style="c...
by arjuneu
Sat Apr 28, 2012 8:29 am
Forum: The User Manager
Topic: Need Help with UM voucher template
Replies: 0
Views: 974

Need Help with UM voucher template

I am creating the voucher template with transfer limit. But the given constant doesn't work.
%u_limit_transfer_f% - Nicely formatted transfer limit (introduced in v3.1);
=not working

Can anyone suggest me something.
by arjuneu
Tue Feb 14, 2012 9:15 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

hi
I have same problem so would you please send the script to solve my problem
http://forum.mikrotik.com/viewtopic.php ... e+disabled


try this
by arjuneu
Fri Jan 13, 2012 6:12 pm
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Re: Radius Problem

[admin@ACE] > ip hotspot export # jan/13/2012 21:56:42 by RouterOS 5.11 # /ip hotspot profile set default dns-name="" hotspot-address=0.0.0.0 html-directory=ACE http-proxy=0.0.0.0:9090 login-by=http-chap,http-pap \ name=default nas-port-type=ethernet radius-accounting=yes radius-default-domain="" ra...
by arjuneu
Fri Jan 13, 2012 6:10 pm
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Re: Radius Problem

post a copy of your hotspot config so i can take a look /ip hotspot export [admin@ACE] > ip hotspot export # jan/13/2012 21:51:31 by RouterOS 5.11 # /ip hotspot profile s et default dns-name="" hotspot-address=0.0.0.0 html-directory=ACE http-proxy=0.0.0.0:9090 login-by=http-chap,http-pap name=\ def...
by arjuneu
Thu Jan 12, 2012 6:11 pm
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Re: Radius Problem

how is your radius configured between router and radius server?Are you using NAT or does the router authenticate to the radius server directly?

If using NAT make sure your router is forwarding Accounting packets to the radius server UDP 1813

I am using Usermanager. That means I'm not using NAT.
by arjuneu
Thu Jan 12, 2012 6:10 pm
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Re: Radius Problem

Try increasing the radius timeout value. It helped me.
/radius
print detail
set 0 timeout=2s
This doesn't work for me...
by arjuneu
Thu Jan 12, 2012 2:16 pm
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Re: Radius Problem

will try that...thanks.
by arjuneu
Thu Jan 12, 2012 7:34 am
Forum: General
Topic: Radius Problem
Replies: 8
Views: 1239

Radius Problem

I have having the radius accounting problem. I have attached the file. Please someone suggest me something.
by arjuneu
Tue Jan 10, 2012 5:19 pm
Forum: General
Topic: Solved!!! PCC+Hotspot+LAN IP Network+PPPoE
Replies: 1
Views: 1753

Re: Solved!!! PCC+Hotspot+LAN IP Network+PPPoE

Little Change: For Hospot: Add: 0 chain=dstnat action=redirect to-ports=9090 protocol=tcp dst-address-type="" src-address-list=LAN hotspot=auth in-interface=LAN dst-port=80 Place the rule a it first and for the rule for other networks, place it at the last. i.e. 8 chain=dstnat action=redirect to-por...
by arjuneu
Tue Jan 10, 2012 4:26 pm
Forum: General
Topic: Solved!!! PCC+Hotspot+LAN IP Network+PPPoE
Replies: 1
Views: 1753

Solved!!! PCC+Hotspot+LAN IP Network+PPPoE

This configuration is working for me. I have 2 WAN and 1 LAN running ROS v5.11 on x86. [admin@ACE] > ip address print detail Flags: X - disabled, I - invalid, D - dynamic 0 ;;; ADSL address=192.168.1.15/24 network=192.168.1.0 interface=ADSL actual-interface=ADSL 1 ;;; HOTSPOT address=70.55.15.1/16 n...
by arjuneu
Sun Jan 08, 2012 6:13 am
Forum: General
Topic: Need Help! PCC+Hotspot+LAN IP Network+PPPOE Server
Replies: 2
Views: 735

Re: Need Help! PCC+Hotspot+LAN IP Network+PPPOE Server

I have service port

Http: 8080

10.5.50.1:8080

What about filter rules.


Please send me full code.
by arjuneu
Sat Jan 07, 2012 2:40 pm
Forum: General
Topic: Need Help! PCC+Hotspot+LAN IP Network+PPPOE Server
Replies: 2
Views: 735

Need Help! PCC+Hotspot+LAN IP Network+PPPOE Server

I have following configuration. ADSL: 192.168.1.5 (wan1) WLINK: 192.168.2.5 (wan2) LAN: 70.55.15.1 (Hotspot) 10.5.50.1 (LAN IP Network) 45.19.254.1 (PPPoE Server) I have having problem that when PCC works for Hotspot, it doesn't work for LAN IP Network and PPPoE server. When it is configured to work...
by arjuneu
Fri Jan 06, 2012 7:05 pm
Forum: General
Topic: Need Help!!PCC Not Working
Replies: 1
Views: 371

Re: Need Help!!PCC Not Working

I configured it again and now it works. But the hotspot login page doesn't appear. I have set hotspot server in the LAN. What can i do?? Any suggestions.
by arjuneu
Fri Jan 06, 2012 1:42 pm
Forum: General
Topic: Need Help!!PCC Not Working
Replies: 1
Views: 371

Need Help!!PCC Not Working

This is my PCC configuration. Can anyone suggest anything. ROUTES 0 A S dst-address=0.0.0.0/0 gateway=192.168.1.1 gateway-status=192.168.1.1 reachable ADSL check-gateway=ping distance=1 scope=30 target-scope=10 routing-mark=to_ADSL 1 A S dst-address=0.0.0.0/0 gateway=192.168.0.1 gateway-status=192.1...
by arjuneu
Wed Jan 04, 2012 8:35 am
Forum: General
Topic: Dual WAN
Replies: 0
Views: 382

Dual WAN

I have two WAN connection. Can I use one for Download and other for Upload.
by arjuneu
Mon Nov 28, 2011 12:25 pm
Forum: The User Manager
Topic: UM via hotspot
Replies: 2
Views: 930

Re: UM via hotspot

change the webpage address port from 80 (http) to 808(or any port) then: http://internalip:808/userman

its under: ip>services
Thanks....
by arjuneu
Mon Nov 28, 2011 12:23 pm
Forum: General
Topic: Hotspot Error Message
Replies: 6
Views: 4022

Hotspot Error Message

Hello all,

I want to know that is there any way to change the error messages for hotspot users. I have users only in the UM. By changing the errors.txt, it only displays the error message for users created in hotspot. Is there a way to change the error message for users who are in UM.
by arjuneu
Sat Nov 26, 2011 8:51 am
Forum: General
Topic: Hotspot Trial User Removed
Replies: 0
Views: 347

Hotspot Trial User Removed

Hello there,
I have set trial users to login. But when I reboot the router the users are gone and already logged in user can login again. Is there any solution or I can't reboot my router. I am using ROS v5.8 x86.
by arjuneu
Thu Nov 17, 2011 10:19 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

Solved....

Disabling the CoA doesn't solve my problem.

But, I made a script to logout active session of hotspot user and schedule it to run before the UM does.
by arjuneu
Thu Nov 17, 2011 8:33 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

If you use the CoA, the user will be logged out at 9:00:00, but using CoA, you can't find the time left of user in the hotspot user page, if you had it there. No, I have tried 3 days ago with enable CoA. my user still not logout, not just that actual profile my user gone. Than I config with time 0:...
by arjuneu
Thu Nov 17, 2011 6:54 am
Forum: The User Manager
Topic: UM via hotspot
Replies: 2
Views: 930

UM via hotspot

Is there anyway to browse UM behind the Hotspot network. I am using ROS 5.8 x86 with UM in same router.
by arjuneu
Thu Nov 17, 2011 6:25 am
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3646

Re: Users to PPPoE and Hotspot

I have figured it out.. Add radius clients with two ip address 1) 127.0.0.1 ----- service - hotspot shared sectet--xxxx (as you like) 2) Your Mikrotik Router IP (aaa.bbb.ccc.ddd)----- service --ppp shared secret-yyyy (as you like) Then, login to UM Go to customers Create two customers One for hotspo...
by arjuneu
Wed Nov 16, 2011 11:17 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

I also tired with starts: At First Logon But it doesn't works. ok, you don't have problem with time zone limitation time just 0:00:00-8:13:59, why you enable CoA support? I got problem with CoA support because nothing time left user in winbox. If your choice starts:now, accountime begin after you c...
by arjuneu
Wed Nov 16, 2011 5:07 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

I also tired with

starts: At First Logon


But it doesn't works.
by arjuneu
Wed Nov 16, 2011 4:57 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

/system clock> print
time: 08:33:28
date: nov/16/2011
time-zone-name: Asia/Kathmandu
gmt-offset: +05:45


/system ntp client> print
enabled: yes
mode: unicast
primary-ntp: 65.55.21.22
secondary-ntp: 0.0.0.0
status: synchronized
by arjuneu
Tue Nov 15, 2011 9:18 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Re: Somebody Help Me Out... UM is really depressing

C'mon your validity=1d your uptime=2h your limitation time=0:00:00-8:13:59 the time 0:00:00-8:13:59 in just 1 day, in other day username test1 can't login if username test1 login at 1:00:00, user test1 session timeout at 3:00:00. try to your validity=1w your limitation uptime=5d time same with conf...
by arjuneu
Tue Nov 15, 2011 4:47 am
Forum: General
Topic: Hotspot Status Page!!! Help me...
Replies: 1
Views: 401

Re: Hotspot Status Page!!! Help me...

I also have noticed that when disabling the CoA in Routers, it shows the remaining time, but doing this the UM doesn't disconnect the user when time is finished.
by arjuneu
Tue Nov 15, 2011 4:46 am
Forum: General
Topic: Hotspot Status Page!!! Help me...
Replies: 1
Views: 401

Hotspot Status Page!!! Help me...

In the hotspot status page, it is not showing the time-left for users created via UM, but when I create the users in local it shows the remaining time.
by arjuneu
Tue Nov 15, 2011 4:42 am
Forum: The User Manager
Topic: Somebody Help Me Out... UM is really depressing
Replies: 15
Views: 3454

Somebody Help Me Out... UM is really depressing

I have the following problem. When radius server (UM) disconnects the user the profile assigned to the user is also removed from the user but not from the profiles.

Is there anybody to help me out???
by arjuneu
Mon Nov 14, 2011 3:37 pm
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1215

Re: UM! Problem

What do you mean with the profile gone? you mean removed?

http://forum.mikrotik.com/viewtopic.php?f=10&t=56467

See Here. I have uploaded my problem. And please suggest me something. What should I do?
by arjuneu
Mon Nov 14, 2011 10:55 am
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1215

Re: UM! Problem

Sure it's more stable but about your issue, not sure.
Try it maybe useful.

I tried doing it but still the same problem..
by arjuneu
Mon Nov 14, 2011 10:53 am
Forum: Beginner Basics
Topic: ROS Version
Replies: 1
Views: 431

ROS Version

Which ROS version is good.

ROS 4.17 (Legacy) or ROS 5.8 (Stable)
by arjuneu
Sun Nov 13, 2011 3:03 pm
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3646

Re: Users to PPPoE and Hotspot

You are able to specify the services in radius. But the point is what ever you specify for each radius server and you can separate services in the user manager easily. Radius.png When you are creating a user you can specify the services by choose the correct profile UM.png How can I specify the ser...
by arjuneu
Sun Nov 13, 2011 2:52 pm
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1215

Re: UM! Problem

Does UM 4.17 doesn't have the problem. I will downgrade UM to 4.17.
by arjuneu
Sun Nov 13, 2011 11:53 am
Forum: The User Manager
Topic: UM! Problem
Replies: 6
Views: 1215

UM! Problem

I have set night users to log on at 6PM to 8AM. When users are logged out at 8AM, their assigned profile is also gone. Why is this happening, can anyone suggest anything. Note: I have tried this with ROS 5.2, 5.5, 5.7 and currently I am using 5.8. I also tried resetting the router and clearing the d...
by arjuneu
Sun Nov 13, 2011 6:37 am
Forum: Beginner Basics
Topic: Mikrotik Install
Replies: 2
Views: 517

Mikrotik Install

Hello,

I want to know that does Mikrotik supports partition or not? I mean I have 4 partitions in my hard drive. When installing ROS it formats only drive C: or all partitions. And what about the drivers for LAN card, Graphics and others..
by arjuneu
Sun Nov 13, 2011 4:55 am
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3646

Re: Users to PPPoE and Hotspot

Hello, How can I make users to login into PPPoe and Hotspot only. All the users are via Usermanager. I mean, is there anyway to allow a user to log into only via PPPoE not in hotspot. And the other user via hotspot not in PPPoE. You should be able to specify what servcies their username can access....
by arjuneu
Sat Nov 12, 2011 5:32 pm
Forum: The User Manager
Topic: Users to PPPoE and Hotspot
Replies: 8
Views: 3646

Users to PPPoE and Hotspot

Hello,

How can I make users to login into PPPoe and Hotspot only. All the users are via Usermanager. I mean, is there anyway to allow a user to log into only via PPPoE not in hotspot. And the other user via hotspot not in PPPoE.
by arjuneu
Sat Nov 12, 2011 5:10 pm
Forum: General
Topic: Multiple WAN!!
Replies: 4
Views: 787

Re: Multiple WAN!!

What do you mean by other end??? ISP....
by arjuneu
Sat Nov 12, 2011 4:54 pm
Forum: General
Topic: Multiple WAN!!
Replies: 4
Views: 787

Multiple WAN!!

Hello all,

I have 3 ADSL connection each 1Mbps. Can anyone tell me that can I make
1+1+1=3Mbps

Is that so, please reply with code.

Also, I read about PCQ, please explain PCQ in simple words.

Thanks,
by arjuneu
Sat Nov 12, 2011 1:35 pm
Forum: General
Topic: usermanager for 5.8 download
Replies: 2
Views: 1748

Re: usermanager for 5.8 download

good evening evrybody, in a dark moment of weakness i decided to upgrade a ros 4.12 to 5.8. so far so good. not so good: - radius turn off during the upgrade - all premade vouchers are gone since the usertable came up empty - usermanager is gone completly and i cant find a place to d/l that package...
by arjuneu
Sat Nov 12, 2011 1:29 pm
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

I tried everything. Resetting ROS and UM. Also tried with only one limitation. But the same problem. I also tried it in ROS 5.2, 5.5, 5.7. Now, I am using v5.8. I am having same problem in all versions.

Somebody help me out.
by arjuneu
Fri Nov 11, 2011 6:57 am
Forum: The User Manager
Topic: COA Problem
Replies: 0
Views: 634

COA Problem

When I enable the COA in Routers of UM. It doesn't display the time-left in hotspot status page. But disabling the COA it shows the time-left. Is there anyway to show the time-left enabling COA.
by arjuneu
Thu Nov 10, 2011 8:21 pm
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

I allow night users to surf Internet from 6 pm to 8 am. Miktorik doesn't support 18:00:00-8:00:00 limitation. So, I have make it two limitation. And the users doesn't automatically logged out at 00:00:00. The session will continue to 00:8:00. After 8:00:00 radius will disconnect the user who are log...
by arjuneu
Thu Nov 10, 2011 1:53 pm
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

this is not happening to user keshar only. It is happening to all users who are disconnected by radius.
by arjuneu
Thu Nov 10, 2011 1:50 pm
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

I am using x86 version of ROS. And the multiple limitation in a profile,, that works. I can't find the solution for my problem.
by arjuneu
Thu Nov 10, 2011 8:52 am
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

Here is my profile and limitation. Can anyone suggest anything????
by arjuneu
Thu Nov 10, 2011 5:45 am
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Re: Usermanager! Profile Problem

I'm currently using ROS 5.7.
by arjuneu
Mon Nov 07, 2011 6:18 am
Forum: The User Manager
Topic: Usermanager! Profile Problem
Replies: 13
Views: 2745

Usermanager! Profile Problem

I have set Night users to logout at 8 AM through usermanager profile. It disconnects the user at 8 AM. But, after disconnecting the Profile of the user is also removed. Can anyone help???
by arjuneu
Sat Oct 15, 2011 4:05 pm
Forum: General
Topic: Need Help! Hotspot page customizing
Replies: 5
Views: 902

Re: Need Help! Hotspot page customizing

I want to add Started and Expiry Date in Hotspot Status page. Can anyone know the script for the Started and Expiry Date in Hotspot Status page. My users are claiming about that. I am using Usermanager as Radius server.
by arjuneu
Sat Oct 15, 2011 12:55 pm
Forum: General
Topic: Need Help! Hotspot page customizing
Replies: 5
Views: 902

Re: Need Help! Hotspot page customizing

I exported the full info but all details are displayed except the Assigned Profile. I'm using ROS 5.7. Why is this happening?
by arjuneu
Wed Oct 12, 2011 6:44 am
Forum: General
Topic: Need Help! Hotspot page customizing
Replies: 5
Views: 902

Re: Need Help! Hotspot page customizing

Currently, it doesn't show anything. I can't create hospot user via winbox because it doesn't have validity period, User and MAC binding, Pricing, etc. features. And sessions i have authenticating has 20 hours of uptime. When creating user via winbox it shows the left time. Any suggestions ...........
by arjuneu
Sun Oct 09, 2011 7:58 am
Forum: General
Topic: Need Help! Hotspot page customizing
Replies: 5
Views: 902

Need Help! Hotspot page customizing

html> <head> <title>.:: ACE HomeNet ::.</title> $(if refresh-timeout) <meta http-equiv="refresh" content="$(refresh-timeout-secs)"> $(endif) <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <meta http-equiv="pragma" content="no-cache"> <meta http-equiv="expires" content="-1"...
by arjuneu
Sat Oct 08, 2011 2:31 pm
Forum: General
Topic: Hotspsot Page Customizing
Replies: 6
Views: 1148

Re: Hotspsot Page Customizing

< html> <head> <title>.:: ACE HomeNet ::.</title> $(if refresh-timeout) <meta http-equiv="refresh" content="$(refresh-timeout-secs)"> $(endif) <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <meta http-equiv="pragma" content="no-cache"> <meta http-equiv="expires" content="-...
by arjuneu
Sat Oct 08, 2011 8:03 am
Forum: General
Topic: Hotspsot Page Customizing
Replies: 6
Views: 1148

Re: Hotspsot Page Customizing

Please post the script to show Started Date and Expiry Date in Hotspot Status Page. I am using Usermanager as Radius Server. I only manage users via Usermanager.
by arjuneu
Sat Oct 08, 2011 6:46 am
Forum: General
Topic: Hotspsot Page Customizing
Replies: 6
Views: 1148

Re: Hotspsot Page Customizing

Hello,
Is there anyway to show Usermanagaer Database in Hotspot Staus Page. If there is a way please reply.
by arjuneu
Fri Oct 07, 2011 2:55 pm
Forum: General
Topic: Hotspsot Page Customizing
Replies: 6
Views: 1148

Re: Hotspsot Page Customizing

Hi there,
I need help. I wanna know how to add Started Date and Expiry date of users in Hotspot Status Page.
by arjuneu
Fri Oct 07, 2011 10:42 am
Forum: General
Topic: Hotspsot Page Customizing
Replies: 6
Views: 1148

Hotspsot Page Customizing

Hello,
I am using Mikrotik RouterOS v5.2. I am running PPPoE and Hotspot. All are working fine. But can anyone help me for Displaying Started Date and Expiry Date in the Hotspot Status Page through Usermanager Database.