Thank you for all the responses. It did work. Just start with a complete untouched "factory" default and follow the printed instructions carefully. Once that is done, the "fine" tuning can be done. I have installed them and is using a 200Mbps up and down fibre line to the net. I ...
I will certainly try again, and report back. It is 3.10pm South African time now and I have been at it since early (no success so far), so my brain is jelly at the moment. It should not be as hard as you seem to be experiencing. Can you describe how the chain of gear you are using is connected? I.e...
I have been using Mikrotik since V3. I do know a lot, but there is more I do NOT know. I got 3 Audience devices to do a job, since the write up about them fit my application. I have spent days to get them to mesh (still no success) The insert that came in the box describe amongst others the led's an...
I have been using a licenced version of this program for a number of years now with great success. I am very satisfied with it and would recommend it without reservations. The reason I am writing here is because of a frustration I experience with MS Windows 10. In error I allowed an update from Wind...
Thank you for the reply. You are right that is a certain place to look!! I did find a solution to the problem -- elsewhere -- but still do NOT know what caused it. I will explain briefly: My xDSL modems are all setup in Bridge as well as PPPoE mode. And it functions (functioned) fine. Some clients c...
I use xDSL to connect to the Internet. All work fine on all my MT routers EXCEPT http://www.aol.com and aol mail CANNOT be accessed through any device connected to the MT. There my be more sites but so far aol is the one causing this head ache. Connecting directly to/through the XDSL modem/router to...
I use xDSL to connect to the Internet. All work fine on all my MT routers EXCEPT http://www.aol.com and aol mail CANNOT be accessed through any device connected to the MT. There my be more sites but so far aol is the one causing this head ache. Connecting directly to/through the XDSL modem/router to...
Hi, how is your system ? the normal voltage is 24.6Volt at me and when decrease to 22V and system sent me notifactions I understand that main power gone. Thanks, yes I can see your reasoning and it is good. On the 750 however there is no voltage variable so I can not use that script. I use the scri...
Hi all~ I have a question. I found a great script and plan on the web for utility monitoring on the cheap by Greg Sowell. The idea is fantastic. I have implemented this script and hardware on 4 routers. Three of the routers are RB450's or 493's running 6.10, and the 4th is a ccr1009 running 6.17. I...
I also think it is a great idea, and implemented it. With limited success. I am now back in the "lab" running tests, on a 750 (ROS v 6.19). When the power fail all goes well and the script notifies me. When the power comes back the port 'dies' and that the status stay at no-link. All I cou...
I have used UserManager for a number of years with success in a certain way that I have found to work that is stable, and I have learned to trust it and its behaviour. Now I am trying to do the following, and believe me I tried, obviously not enough because I just can not get it to work properly, co...
I am no expert but you need to add the profile to the user (click the "+" then check if the profile and any limitations has been added) when you add the user (if you have not done so already) This is in your step 6. Also the message you display in your step "last" is not from use...
Thanks mrz I am actually looking for the "variables" that are available for use in scripts for usermanager /tool user-manager user Some script published elsewhere on the forums use a variable "credit-till-time" I googled that :o and fould no useable results :? Variales like these...
If possible, can someone point me to a document listing the variables available for uesermanager. I have looked but can not find such list (if there is one) I see guys using variables in scripts but I do not know where they get them (variables) from. If they can get it I must also be able to get it....
In a process of learning and working I found this script. It runs all the way through ONLY when I remark (#) out this line: :local thisCredit [/tool user-manager user get $iterator credit-till-time] From this I think (guess) that the variable "credit-till-time" can not be found or does not...
I have the same question. I think it works like this (but I am NOT sure) My profiles are set for a certain amount of data transfer in a 14 day window. The profiles (I have check this) will expire after 14 days OR when the transfer limit is reached. And that works well. Now like you have said I have ...
Its been a long, hard, difficult struggle for me to get some functionality out of userman. I identify with your frustration. What I wish for the most, absolutly the MOST, it is for well written, and understandable, up to date manuals and documentation. If I can read it I can do it. I know this is a ...
How do I change the messages users get through the hotspot login page. For example <no valid profile found> This message and others are not in the editable lanuage file the determines the language the userman "speaks" to admin, custmers etc. In the hotspot errors file there are the options...
Hi There I am sorry this is not advice. :( I just need to be sure I understand your problem correctly. so I will re-phrase it. You want usernames to be generated in a secuential fasion when you create a user by just adding 1 user at a time. Do I understand you correctly? If so? you want a set-able &...
I am, confused, frustrated and naivly hopefull....... This forum "The User Manager" like has been said is quite active. The User Manager is included with updates of ROS. If MT has abandonded UM then why still distribute it? If the the last release of UM that was "stable" is still...
The more I learn about Mikrotik ROS the more things I find out I do not know........ I am using user manager with hotspots on RB750. It took a loooong time for me to figure out some things about User Manager, but I am getting there........ I am wondering what I am doing wrong. I give the users a set...
I am sure I am not the 1st one with this question. I did look over the forums and googled alot, but still cannot find the answer. So please point me to the right place or right answer. I hope there is a answer?? I have longer term users on my Hotspots (on RB750's) I limit them on total bandwidth (da...
Hi There I use RB750G with ROS 5.7 and UM 5.7 I can not find a comprehensive (and up to date) user manual for UM 5.7 User manager 5.7 that is installed now is not consequent, and the results with user, profiles and limitations are illogical and not predictable. I have also noticed that actual hotspo...
Thank you for all the help so far. I got it working....... I simply started on a clean slate (complete reset) and reconfig the RB. And the hotspots now work nicely (test environment and trail user) In the new cofig I followed your advice and removed the double address: [admin@XXXXX] > ip address pri...
I am doing a 'crash' course on CLI......... :) so please bear with me. I did however follow your suggestions: "Check the "Interface" section to insure the ports are removed from the switch." I use Winbox. On Switch: Port: all the ports are: Switch 1: to VLAN fallback I do not kno...
Hotspot issue..... I use the RB750. ether 1 is the gateway to the internet and is a DHCP client. ether 2 is the hotspot address and is a DHCP server This works (very well) because it is a very standard way of doing. I also use userman. I then set up another hotspot to work on ether 3. The user get t...