well it can't be radius problem.
negative values shows when Mikrotik passes reached limit.
if i set limits 0 for user he gets unlimited data transfer.

Hello all ;) Didn't know where to write such problem so I'm writening it here. Some time ago I havr set up hotspot for users. Hotspot authenticates users by radius. Service is being payed via sms. After user sends sms it gives him login and password. Limit of the data depends from price of the sms (...

The device doesn't have to support specific modules, it supports SFP specification. RB2011 supports any 1.25G SFP transceivers that is within the SFF Committee specifications for SFP Transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network) - this hardware support MUST ...

If you use in fact less than 30V it can work. Problem is i gave 48V summary to platform.

Hi all.

Accidentally I pluged in jack 24V power and Passive POE 24V together in to
routerboard. It has damaged.

Has anynoe have any elektricall service manual so i could check whats damaged?

I have made it running after modem firmware upgrade but only in 3G mode.
But modem can not scan for networks at all.
Desspite the fact that operator declares that LTE can work,
LTE mode does not connects to the network at all.

Ehm, your result table is completely off - i just run simple test Trough my RB493G - that have some configuration on it and with single TCp connection to my linux server i got more than 300Mbps throughput. I''m sure if i will clear up configuration and will make more TCp connections i will get even...

I have done downgrade.
But still modem is not workik as it shooud.
I'm sending support file to you. Thanks.

Hi all. I am trying to run MC7710 LTE card at RB411UAHR. At 5.15 router os i cant do scan. It shows info that modem did not respond. I have tried 6.0beta2 instead. Beta worked fine untill i plugged in modem at mpcie. After power on, all interfaces has gone. Only way to get in is by COM port. Help :)

Problem SOLVED. I accidentally turned off connection tracking at firewall.

UPD: it's been working for 2 hours since then... And now again - hung up...

What power supply do you use? Oryginal?

Well. I have tested E171 and E173 on RB751.
It worked well. Havent noticed such problems as yours.
I think there might be problem with power at USB port at this model.
So i'm just suggesting to test it on similar equipment.

Do you rally need PoE at eth ports of router?
Why dont you use RB751 instead : http://routerboard.com/RB751U-2HnD

Anyone? Any ideas?? ;>

Does DNS work at clients? If not, can they still go to hotspot page by IP?

They can't get by IP. Every request lands at firewalls filter input and jumps to hs-unauth and is being rejected.

Hi guys. I have got some nut to crack. Im happy user of RB450G. It is configured to work with linux ospf on port eth1 ( uplink ) network type broadcast, redistribute-static=as type 1. Routing table is generated automatically. There are added networks to redistribute ( core and pppoe ). Im also termi...

Last week, at inet-meeting Cyberbajt presented his new Mimo 3x3 products. Pretty impressive results, I think. With new Atheros AR93x0 chipsets, MikroTik becomes fastest WiFi solution, in this price segment. Nice alternative for high throughput p2p links. :D Does anyone had any experience with such e...