Community discussions

MikroTik App

Search found 65 matches

by e2346437
Mon Feb 09, 2009 5:00 pm
Forum: RouterBOARD hardware
Topic: RB493ah switch ports won't route
Replies: 6
Views: 1595

Re: RB493ah switch ports won't route

e2346437 - You are going to have to show us your config before anyone can help you... /ip address export /ip route export /ip route rule export /ip firewall nat, mangle, & filter export..... R/ Sure, if you insist, but there really isn't anything special in it. [admin@mikrotik] > ip address export ...
by e2346437
Mon Feb 09, 2009 4:13 pm
Forum: RouterBOARD hardware
Topic: RB493ah switch ports won't route
Replies: 6
Views: 1595

RB493ah switch ports won't route

Hi, Backpacked into a remote tower last week to replace the three-port MT router we had there with a larger 9-port RB493ah. Needed an additional port for a new backhaul. Ether1 was 10.0.8.5/24, and is where the tower gets it's bandwidth from. Ether 2-9 are on some type of switch chip, but I assumed ...
by e2346437
Thu May 15, 2008 3:12 am
Forum: General
Topic: Marking Packets in v2 versus v3
Replies: 3
Views: 962

Re: Marking Packets in v2 versus v3

Thanks, that worked! What is the nature of this command? Why is it there?
by e2346437
Thu May 15, 2008 12:20 am
Forum: General
Topic: Marking Packets in v2 versus v3
Replies: 3
Views: 962

Marking Packets in v2 versus v3

Hey Folks, I'm adding VOIP priority to all the Mikrotik routers between my customers and my head end. I've just deployed a version 3.0 RB333 as an access point on a tower. It is configured with a WLAN interface, an Ether1 interface, and is bridging traffic from the WLAN to Ether1. From there it goes...
by e2346437
Sat Jun 23, 2007 2:32 pm
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 7052

Re: A script to watch the battery voltage?

Some more explanation on this script please? Does it only have to be run once at startup or does it need to be run every 5 minutes or so? Any chance of an English translation?
by e2346437
Sun Feb 04, 2007 4:28 pm
Forum: General
Topic: Bad performance on new line
Replies: 6
Views: 1196

But what kind of hardware/configuration do you have for the firewall? What kind of latency do you have on your network? It's a 2Ghz P4 with 3 x RB44 (12 ports) running RouterOS 3Beta5. 256MB Ram. 3 ports active, 1 is WAN uplink, 1 holds a C Class public IPs and the last is the Natted interface. Whe...
by e2346437
Mon Dec 11, 2006 4:20 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16789

I don't have any more info. You should give them a call. They are very nice guys and will be very helpful.

Eric
by e2346437
Sun Dec 10, 2006 3:06 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16789

Yes. You can do simple scripts with the v1 unit, but they can only automatically be launched by schedule or by changing the input on one of the 5 available I/O pins. Once the event trigger is fired, you have the commands for Relay 1, 2, and 3 on/off, and the commands to wait 1, 2, 3, 4, or 5 seconds...
by e2346437
Sun Dec 10, 2006 1:26 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16789

Read this, it's just what you are looking for!

http://www.bndcom.com/rms/power_relay_project.htm

Eric
by e2346437
Fri Oct 20, 2006 3:42 am
Forum: Scripting
Topic: APC UPS Monitoring Script?
Replies: 5
Views: 1910

anyone have any code for this?
I dont have APC , i've got Liebert
Mikrotik will only work with the APC Smart-UPS signalling protocol. Nothing else will work, and you will find that Mikrotik is not interested in adding support for anything else.

Eric
by e2346437
Tue Oct 10, 2006 2:39 am
Forum: General
Topic: Where to purchase Portwell products?
Replies: 0
Views: 1939

Where to purchase Portwell products?

Sorry for the off topic post, but CMIT and others have spoken well of the Portwell products. I want to purchase a NAR-5060 but can't find any sources in the US. Can anybody suggest a reseller?

Thanks,
Eric
by e2346437
Sun Oct 01, 2006 6:19 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16789

how much are those units? Thier website gives no prices.
When we purchased version 1 about 2-3 years ago, it was around $400 shipped. You should contact them to find out for sure, they are very helpful and knowledgeable.

Eric
by e2346437
Tue Sep 12, 2006 2:44 am
Forum: Scripting
Topic: APC UPS Monitoring Script?
Replies: 5
Views: 1910

Upstairs in bed. Really!

I've got one somewhere in the field - I'll find and post...
"Thank you, Sloane".
- Economics Teacher
Ferris Bueller's Day Off
by e2346437
Mon Sep 11, 2006 5:01 pm
Forum: Scripting
Topic: APC UPS Monitoring Script?
Replies: 5
Views: 1910

Anyone? Anyone?

Bueller? Bueller?

:D
by e2346437
Sun Sep 03, 2006 4:38 am
Forum: Scripting
Topic: APC UPS Monitoring Script?
Replies: 5
Views: 1910

APC UPS Monitoring Script?

I've searched high and low for a decent APC UPS monitoring script for 2.9.29. The links I've found that point to a "#upsemail" section of the manual all seem to be broken. Is there anyone out their willing to share their scripts with me? I'd like to find a script that emails when UPS goes to battery...
by e2346437
Fri Sep 01, 2006 2:43 am
Forum: Wireless Networking
Topic: PtP 5.8 Bridge and MAS90
Replies: 3
Views: 1044

Re: PtP 5.8 Bridge and MAS90

Greetings I have a PtP 5.8 link that is solid at 36 Mbps. I have one program MAS90 that runs dog slow across the PtP bridge. Any help would be appreciated. Specs: CM9 Cards, Both set to bridge at 5805 and one -70 the other -80 signal. 2K AD connections for DHCP, DNS, File and Printer server just fi...
by e2346437
Thu Aug 31, 2006 3:45 am
Forum: Wireless Networking
Topic: no assocations when using sr9's
Replies: 10
Views: 1887

Re: no assocations when using sr9's

I've got two WRAP boards running 2.9.27 and two of the new Ubiquiti SR9 cards. One board is in ap bridge mode while the other is in station mode. They are both sharing the same SSID, Band and Frequency mode. I have even changed the band and frequencys to use every possible combination (the same on ...
by e2346437
Thu Aug 31, 2006 3:23 am
Forum: General
Topic: SRCNAT Masquerade Problem
Replies: 4
Views: 2038

Eric Apologies. I'm plainly talking rubbish here. As you're src-natting on the MT then there's no need for the PIX to need to know how to route to 192.168.0.0 Here's my src-nat rule for my internal LAN: chain=srcnat out-interface=Internet src-address=192.168.1.0/24 action=src-nat to-addresses=x.x.x...
by e2346437
Wed Aug 30, 2006 8:09 pm
Forum: General
Topic: SRCNAT Masquerade Problem
Replies: 4
Views: 2038

The PIX requires a route to the 192.168.0.0 network. Either manually configure one, or set the PIX and MT to use a routing protocol such as RIP. Regards Andrew Andrew, Thanks for the reply. I understand what you are saying, and appreciate your answer. However, my goal is to be able to deploy this r...
by e2346437
Wed Aug 30, 2006 2:43 am
Forum: General
Topic: SRCNAT Masquerade Problem
Replies: 4
Views: 2038

SRCNAT Masquerade Problem

Hello. I'm having a problem with srcnat masquerade, trying to make my MT act like a common home gateway to the Internet, but I can't seem to get it to work. Here is my network topology, starting with my ISP: Cisco PIX 10.0.0.1----->AP 10.0.0.2----->Dlink 802.11b Bridge 10.0.0.70-- --->Mikrotik RB532...
by e2346437
Tue Aug 29, 2006 12:46 am
Forum: Wireless Networking
Topic: Building a AP and CPE 900mhz
Replies: 5
Views: 1454

Re: Indoor cpe

I wouldn't count on an indoor rubber duckie going more than a few hundred yards - a mile is unrealistic in my opinion. I have marginal signal at my desk with trango 900 11 db ap to a su with 10db patch at 0.25 miles both with 26dbm output and -98 receive sensitivity. I'd scratch that idea :) Scott ...
by e2346437
Sun Aug 27, 2006 3:34 pm
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 3006

I can confirm that this problem exists. I have an RB532 that locked up with a UPS attached a couple of weeks ago. When the 532 boots the UPS beeps randomly which would indicate to me that the initial boot messages are confusing the system. In fact it took more than a simple reboot to recover the 53...
by e2346437
Sun Aug 27, 2006 6:37 am
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 3006

My buddy said that the upgrade from .27 to .28 left his UPS unusable, it would keep rebooting RouterOS every time it started... I asked him to send supouts for it - apc 1200 i think. Sam Thanks for the info. Can anybody else confirm this problem? As much as I like Mikrotik products, I'm getting rea...
by e2346437
Sun Aug 27, 2006 3:25 am
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 3006

2.9.29 with the matching 2.9.29 UPS package.

Thanks,
Eric
by e2346437
Sun Aug 27, 2006 3:05 am
Forum: RouterBOARD hardware
Topic: RB532 Locks up on boot with APC UPS Attached
Replies: 9
Views: 3006

RB532 Locks up on boot with APC UPS Attached

Hi, I've seen a few posts that seem to be related to the same bug I'm trying to get around. It's getting cold up her in Northern Maine, and today I replaced a PC with a IDE flash module running Mikrotik with an RB532/A with 6-port daughtercard. When I boot the unit with an APC SmartUPS 1500VA attach...
by e2346437
Sun Aug 27, 2006 2:46 am
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16789

This is the equipment that we use to monitor battery voltage via TCP/IP over a wireless link in Northern Maine. We have it plugged into Ether3 on an RB532: http://www.bndcom.com/products.html I use the version 1 product to monitor the voltage coming from my solar cells, windmill, and battery all at ...
by e2346437
Tue Jun 27, 2006 2:31 pm
Forum: General
Topic: Bridging w/Queue Tree Example for your enjoyment & audit
Replies: 7
Views: 2328

How about if I want to bridge between VLAN configuration? For example : Cisco router -- mikrotik bridging -- catalyst I have tried to confifgure traffix shape, but it's still not working. Any opinion? Look at the ip firewall mangle section of my config above. You have to use mangle to mark the conn...
by e2346437
Mon Jun 26, 2006 9:37 pm
Forum: General
Topic: Bridging w/Queue Tree Example for your enjoyment & audit
Replies: 7
Views: 2328

It is required for bridging. I couldn't get it to work any other way.

Eric
by e2346437
Mon Jun 26, 2006 2:12 pm
Forum: General
Topic: Bridging w/Queue Tree Example for your enjoyment & audit
Replies: 7
Views: 2328

Why simple queues over queue tree?
by e2346437
Sat Jun 24, 2006 4:07 am
Forum: General
Topic: Bridging w/Queue Tree Example for your enjoyment & audit
Replies: 7
Views: 2328

Bridging w/Queue Tree Example for your enjoyment & audit

Hi, After many months of struggling with Mikrotik and asking lots of questions and reading lots of documentation, I would like to share my configuration with the world. I want to do this for two reasons. One, to give back a little to the community, and maybe help someone else down the road. Two, bec...
by e2346437
Sat Jun 24, 2006 3:42 am
Forum: General
Topic: router bridge for traffic shapping
Replies: 8
Views: 1796

You can do it.
but try to read this

http://linuxmafia.com/faq/Essays/smart-questions.html

Then explain that you want to do

Maximiliano
I could not have said it better myself. Thanks Maximiliano!

Eric
by e2346437
Wed Jun 21, 2006 4:13 am
Forum: General
Topic: unhappy with RouterOS
Replies: 10
Views: 2210

Go to http://www.wisp-router.com and for $100 you *could* have purchased a Mikrotik Level 4 (WISP) software license on a 64MB Disk-on-module device that is solid state and connects directly to an IDE port on your router mainboard. This device can be moved from PC to PC with no issue and has NO movin...
by e2346437
Fri Jun 02, 2006 3:34 am
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

No NAT

Why do you need to mark the connection, then use that connection-mark to mark the packets? Why won't Mikrotik just let you mark the packets using packet-mark? Eric If you by any means NAT your connection (either DST-NAT; web-proxy redirect or SRC-NAT), then you must first mark the connections and t...
by e2346437
Thu Jun 01, 2006 10:27 pm
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

Template doesn't work

Guys, Here is a template that I use to create bandwidth management queues. First it creates the marking rules, then it creates the queues. I use this to manage a number of links from a datacentre, and it works fine with 2.9.17 and bridged interfaces. I also have one for 2.8.x as well. Let me know i...
by e2346437
Mon May 08, 2006 2:07 am
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

Guys, Here is a template that I use to create bandwidth management queues. First it creates the marking rules, then it creates the queues. I use this to manage a number of links from a datacentre, and it works fine with 2.9.17 and bridged interfaces. I also have one for 2.8.x as well. Let me know i...
by e2346437
Mon May 01, 2006 5:36 am
Forum: General
Topic: Who no Pay don´t Surf !
Replies: 11
Views: 2622

Re: Who no Pay don´t Surf !

This the config for redirect users to a specific web page that no pay the bil...it works fine. add chain=dst-nat n sr-address(the address of your client, in my case are static), protocol=tcp, src-port=0-65535, action=dst-nat, to address= 200.30.xxx.xx public Ip of webpage with the message, to ports...
by e2346437
Mon May 01, 2006 5:32 am
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

Interpretation

[valens@BM] interface> pr Flags: X - disabled, D - dynamic, R - running # NAME TYPE RX-RATE TX-RATE MTU 0 R ether1 ether 0 0 1500 1 R ether2 ether 0 0 1500 [valens@BM] interface bridge port> pr Flags: X - disabled, I - inactive, D - dynamic # INTERFACE BRIDGE PRIORITY PATH-COST 0 ether1 bridge1 128...
by e2346437
Sun Apr 30, 2006 5:04 pm
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3508

Cost?

we have throwen out all the d-link routers at our clients and changed to zyxel and have no problems any more with pppoe - is is really running smooth we changed to pppoe over 3 years ago and i am sure it was the right way to go - all the config and accounting is done in the radius database via web ...
by e2346437
Sat Apr 29, 2006 5:09 pm
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

Re: Post Config

valens, Would you post a smidgeon of your config so I can try it on my router? I posted my config, and if you run it through (changing your IP), it may not work for you. I have the exact config on a 2.8.28 router and it works. I have it on a 2.9.22 router and it does not. Same code, just different ...
by e2346437
Sat Apr 29, 2006 5:07 pm
Forum: Scripting
Topic: how to make a profile for users that did not pay´d the bill?
Replies: 18
Views: 5304

Redirect on transparent bridge

So I suppose that if I'm using Mikrotik as a transparent bridge and not as a router/NAT box, that this trick won't work?

Eric
by e2346437
Sat Apr 29, 2006 5:32 am
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3508

PPPoE

Ok, PPPoE has a learning curve, but what do you do about: Customers that need a routable IP? No problem, Cisco PIX static rule with conduits. Customers that want to run servers? No problem, Cisco PIX static rule with conduits. Customers that multi-home? i.e. Two ISP's? Never had a problem. Customers...
by e2346437
Fri Apr 28, 2006 7:16 pm
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3508

Inconsistency

Have to disagree with you there. PPPoE makes things alot simpler from managing a network standpoint. Set IP pools, let the router dish private IP's out to the people and assign a few publics. then you can walk away and let the router do the rest. The only downside I have run into is inconsistency o...
by e2346437
Fri Apr 28, 2006 5:43 am
Forum: General
Topic: transparent traffic shaper
Replies: 35
Views: 10292

2.9.22

I just upgraded to 2.9.22 on my transparent bridge, and I can't seem to get queue trees (pcq) to work at all. I've got it running on an RB500 that is doing routing, but I can't seem to get it working on bridge. To be more specific, the example in the Wiki seems to only work for upload on my bridge, ...
by e2346437
Fri Apr 28, 2006 5:25 am
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3508

Opinion on PPPoE

IMHO, PPPoE just confuses things. Our network is fully firewalled and NAT'td, with just simple static IP's assigned by the installer. If your CPE has the right IP and WEP key, you're on. MikroTik keeps it running smoothly with bandwidth control, and the ability to knock non-paying users offline. Eric
by e2346437
Sun Apr 23, 2006 5:22 am
Forum: General
Topic: MT *NOT* Dropping Bit-Torrent
Replies: 4
Views: 1138

Found Bridge Firewall

Ok, found IP Bridge Filter, and added chain=forward packet-mark=all_p2p action=drop. It didn't solve my problem, the same customer has dozens of "established" bit-torrent connections still. I don't see any traffic hitting this rule at all through Winbox.
by e2346437
Sun Apr 23, 2006 5:17 am
Forum: General
Topic: MT *NOT* Dropping Bit-Torrent
Replies: 4
Views: 1138

Bridge Firewall

What is bridge firewall?
by e2346437
Sun Apr 23, 2006 5:14 am
Forum: General
Topic: MT *NOT* Dropping Bit-Torrent
Replies: 4
Views: 1138

MT *NOT* Dropping Bit-Torrent

Hi, I've created an IP Firewall Chain rule, action=drop, for p2p=bit-torrent, in the PC-based Mikrotik that is acting as a transparent traffic shaper (bridge) for my WISP network. I'm currently using version 2.9.22. Even after a reboot of the system, there is still one customer listed in IP Firewall...
by e2346437
Fri Apr 14, 2006 4:19 am
Forum: General
Topic: Bittorrent and MT
Replies: 16
Views: 3963

How to block

Can you give an example of the mangle rule and firewall rule to block this new encrypted bittorrent protocol Normunds?
by e2346437
Thu Apr 13, 2006 6:58 pm
Forum: General
Topic: High Performance ATX Motherboard to Counter CPU Load
Replies: 9
Views: 1839

Traffic

I didn't understand why you are pushing 150 Megabits, but now I understand that you are pushing 20. Still, that's a lot of traffic in my mind. I run a large wireless ISP and am pushing less than 8 megabits most of the time.
by e2346437
Thu Apr 13, 2006 5:53 pm
Forum: General
Topic: High Performance ATX Motherboard to Counter CPU Load
Replies: 9
Views: 1839

what sort of traffic you want to push hci? It's funny that a P4 2,6 is not enough for you? I can post you a nice jpeg from a live System that i have access to with 10 CM9 running at 802.11a with minimum 24/7 traffic forward at 17-20Mbit. Top mark seen forwarding was about 150Mbit ... still i think ...
by e2346437
Thu Apr 13, 2006 3:12 am
Forum: General
Topic: High Performance ATX Motherboard to Counter CPU Load
Replies: 9
Views: 1839

Suggestion

I just threw together a system today that works great! I was going to use an RB532/A with the 6-port daughter card, but seeing as NO ONE in the USA seems to have them (AHEM! MT are you listening?!?), I was forced to use a PC. I used an ASUS A8V Deluxe board with an AMD Socket 939 3700+ processor. It...
by e2346437
Fri Apr 07, 2006 1:34 am
Forum: General
Topic: MT firewall vs Cisco Pix
Replies: 1
Views: 1511

Re: MT firewall vs Cisco Pix

Hello Mikrotonians! I am redisigning my network. I am no longer happy with my erratic ping times, and inconsistant service. So I am thinking of reducing the number of devices traffic passes through. Currently: 3xT1-->Tasman 1004 router--> Cisco PIX 506 --> Mirotik 2.9.18 used for bandwidth shaping ...
by e2346437
Fri Mar 31, 2006 6:22 pm
Forum: General
Topic: Complex Routing Setup
Replies: 3
Views: 1078

Bridge Placement

It also seems to me that the bridges need to be placed in front of the Mikrotik boxes?
by e2346437
Fri Mar 31, 2006 3:17 pm
Forum: General
Topic: Complex Routing Setup
Replies: 3
Views: 1078

is there a BGP feed from the ISP? BGP is (only) for exterior routing between ASes, OSPF will be the right choice for this scenario. How is the green wireless link created, between the APs or between the MTs? The green wireless link is a pair of Tranzeo 5.8Ghz wireless bridges. Only Town 1 currently...
by e2346437
Fri Mar 31, 2006 3:49 am
Forum: General
Topic: Complex Routing Setup
Replies: 3
Views: 1078

Complex Routing Setup

Anyone have a suggestion on how to use BGP or OSPF to handle the following situation? http://www.ainop.com/diagram.JPG Normally, each Town will be fed via it's own T1. However, if a T1 should go down in either Town, I want the Mikrotik to re-route traffic through the wireless link to the T1 in the o...
by e2346437
Mon Mar 27, 2006 3:49 am
Forum: General
Topic: Winbox makes CPU go to 100%
Replies: 9
Views: 2429

CPU Frequency

I don't know if it matters but my RouterBoard500 with 2.9.18 on it has a CPU Frequency of 264. I can't imagine why yours is faster at 333, or that it would be causing the problem, but I thought I'd point it out.

Eric
by e2346437
Sun Mar 26, 2006 11:44 pm
Forum: General
Topic: Queueing problem
Replies: 1
Views: 779

Queueing problem

Ok, so digging further reveals that my queue trees accept the traffic first and override my simple queues. It looks like other people have had the same issue, but no fixes posted. Surely someone knows how to do this? I need a max-limit pcq queue to enforce the limits of my T1, and a very restrictive...
by e2346437
Sun Mar 26, 2006 8:58 am
Forum: General
Topic: Queueing problem
Replies: 1
Views: 779

Queueing problem

Hi, I am having a queueing problem. I'm using nat on src with masquerading. I've setup firewall mangle to mark "all" packets and "p2p" packets. I have two queue trees, both pcq, one applied to global-in and one applied to global-out. They are limited to 1.544Mb each to reflect the fact that they are...
by e2346437
Sat Mar 25, 2006 1:28 am
Forum: General
Topic: SFQ, PCQ, RED
Replies: 0
Views: 838

SFQ, PCQ, RED

Hi,
I've read the manual and understand (almost) what SFQ, PCQ, and RED are, but could someone describe for me simply when and where you would use these different queuing mechanisims?

Thanks
by e2346437
Tue Mar 21, 2006 5:20 pm
Forum: General
Topic: Hardware recomendation for head end
Replies: 3
Views: 869

Can't Upgrade

My boss requires us to have the correct level of hardware to start out with, even if we have to spend more to get it, rather than upgrade right away.

Can someone else give me a difinitive answer please?

Eric
by e2346437
Tue Mar 21, 2006 5:18 pm
Forum: General
Topic: Hardware recomendation for new tower
Replies: 3
Views: 865

Heat/Cold

I'm more than willing to provide some heating and cooling to the equipment, but I guess I'm more concerned whether or not the equipment can pass that much traffic.

Eric
by e2346437
Tue Mar 21, 2006 2:53 pm
Forum: General
Topic: Hardware recomendation for new tower
Replies: 3
Views: 865

Hardware recomendation for new tower

Hi, I'm replacing one of my old towers with a brand new one, going from routed Orinoco equipment to non-routed Tranzeo backhaul and AP equipment. I plan to use a Mikrotik unit of some kind, but need a hardware recommendation. The tower will have 54 megabits incoming, and three outgoing 54 megabit li...
by e2346437
Tue Mar 21, 2006 2:27 pm
Forum: General
Topic: Hardware recomendation for head end
Replies: 3
Views: 869

Hardware recomendation for head end

Hi, I need a hardware recomendation for our head end. We will be processing traffic from 32 Class C subnets, although not all of them will be in use. Some Class C's are used just for a 2 radio backhaul, but some are used to service 60 customers or slightly more. Each Class C will have a simple queue...
by e2346437
Tue Mar 21, 2006 4:52 am
Forum: RouterBOARD hardware
Topic: nO ROUTER boards in USA
Replies: 4
Views: 1899

Not out of stock

Look harder...http://www.nwcis.com has the 32mb routerboard in stock.
by e2346437
Sun Mar 19, 2006 2:28 pm
Forum: General
Topic: Determine - "Who is using the bandwidth?"
Replies: 5
Views: 1562

Bandwidth monitoring

How about the free NTOP for Linux?

http://www.ntop.org

Eric