Community discussions

MikroTik App

Search found 55 matches

by TDPsGM
Tue Apr 09, 2013 8:39 am
Forum: Beginner Basics
Topic: Exporting / Importing Addresses -- Winbox
Replies: 3
Views: 3394

Re: Exporting / Importing Addresses -- Winbox

This would export/import addresses as well as credentials for MikroTik boxes saved in your favorites list. It has nothing to do with configuration of any MikroTik box. Oh. That makes sense. Thanks. While we are at that particular screen, what does the "Clear Cache" do then? It is certainly not doin...
by TDPsGM
Mon Apr 08, 2013 10:38 pm
Forum: Beginner Basics
Topic: Exporting / Importing Addresses -- Winbox
Replies: 3
Views: 3394

Exporting / Importing Addresses -- Winbox

When using Winbox to login, there is a tools button.

What exactly is being Exported here?
export-import_addresses.png
Are these address for the DHCP server leases?
by TDPsGM
Sun Apr 07, 2013 6:23 pm
Forum: Beginner Basics
Topic: [Solved]Recover from "No Default Configuration" System Reset
Replies: 7
Views: 21793

Re: Recover from "No Default Configuration" System Reset???

get netinstall, enable net boot, set IP to same subnet as your PC, hold reset button until user light stops flashing, it will kick in etherboot, and you will be able to flash it with fresh ROS. Thanks dravnieks. This is Ultimately what I had to do. I followed these instructions here as they were ve...
by TDPsGM
Sun Apr 07, 2013 6:00 pm
Forum: Beginner Basics
Topic: [Solved]Recover from "No Default Configuration" System Reset
Replies: 7
Views: 21793

Re: Recover from "No Default Configuration" System Reset???

Hi TDPsGM, I have found that sometime MT hardware doesnt reset even if you reset it (?), try once again (couple of times!) to reset it with reset button (you have to hold it during the powerup, and release once ACT stops flashing - aprox 10s) Tomas Thanks for the response petrisimo. No, that didn't...
by TDPsGM
Sat Apr 06, 2013 10:55 pm
Forum: Beginner Basics
Topic: [Solved]Recover from "No Default Configuration" System Reset
Replies: 7
Views: 21793

[Solved]Recover from "No Default Configuration" System Reset

I was planning to start with a clean slate with an RB450G and version 5.24 and when I went to System>Reset Configuration in winbox ... I checked the box that said "No Default Configuration" and then clicked the "Reset Configuration" Button. No Default Configuration Reset.PNG Now winbox will not dete...
by TDPsGM
Sat Mar 23, 2013 9:25 am
Forum: Beginner Basics
Topic: Can I restrict Network Access using Que's?
Replies: 1
Views: 1027

Re: Can I restrict Network Access using Que's?

Does anyone have any suggestions on this that might help?
by TDPsGM
Sat Mar 23, 2013 9:22 am
Forum: Beginner Basics
Topic: [Solved] Hotspot Login Screen Not Appearing.
Replies: 2
Views: 1358

[Solverd] Hotspot Login Screen Not Appearing.

in files is there hotspot folder available ? .... Thanks samir494 for the response. Yes the files are there. It turns out that all I needed to do was under the IP>Hotspot>Server Tab was select my hotspot server and click on the "Reset HTML" button. I just never noticed that button before until now....
by TDPsGM
Wed Mar 13, 2013 6:26 am
Forum: Beginner Basics
Topic: [Solved] Hotspot Login Screen Not Appearing.
Replies: 2
Views: 1358

[Solved] Hotspot Login Screen Not Appearing.

I have a RB750GL running a hotspot while I tinkered with a RB450G. The RB450G I used the GUI System/Reset Configuration option, and then tried setting a simple Hotspot up using the wizard. Everything seems to be ok (I get assigned an IP address that I set for this MAC in the DHCP Lease). What I don'...
by TDPsGM
Wed Mar 13, 2013 6:08 am
Forum: Beginner Basics
Topic: Can I restrict Network Access using Que's?
Replies: 1
Views: 1027

Can I restrict Network Access using Que's?

Ok, I have set up a Hotspot and added users so they don't have to "Login" to the network to get on line. To be honest I preferred the data I was looking for when I had set people up in the que's but I wasn't sure how to restrict access to those that were NOT in the que list. Is there a way to restri...
by TDPsGM
Tue Mar 12, 2013 3:56 am
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Can I restrict Network Access using Que's?

Note the question has been MOVED to a new thread here:
http://forum.mikrotik.com/viewtopic.php ... 22#p359948

{EDIT} The question has been moved {/EDIT}
by TDPsGM
Sat Feb 16, 2013 2:02 am
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

Ok, because this thing is bugging the heck out of me, I grabbed a spare Hard Drive and did a quick "Fresh" windows install. I threw on the same AV and Firewall and Winbox logs in perfectly - just as you'd expect it too. :? So it is clearly it is a software conflict but I haven't the foggiest idea wh...
by TDPsGM
Sat Feb 16, 2013 1:57 am
Forum: Beginner Basics
Topic: Firmware upgrade question
Replies: 9
Views: 2355

Re: Firmware upgrade question

Ok, I found it on the http://tiktube.com/ website. There was a video there from a MUM conference that explained that the "Firmware" comes with the OS version updates. It also said that you have to do the OS version update FIRST. After that, you can apply the Firmware update. Maybe I am missing it, b...
by TDPsGM
Thu Feb 14, 2013 12:10 am
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Sorry, I am not sure what you mean by host file. What should I be looking for? Is it possible that The NIC on THIS computer is faulty? Has anyone ever heard of that? I have never had any other problems with this machine. Being that I have a 'Clean' Win7 pro OS on another partition that ALSO doesn't ...
by TDPsGM
Wed Feb 13, 2013 11:03 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

it's an idee, go to dos prompt type arp -d try again to connect the rb with winbox No sorry, no luck. The exact same thing happens. The only thing that I have different on THIS machine that I am having trouble connecting with is that there is a VPN installed. I don't see why THAT would make a diffe...
by TDPsGM
Wed Feb 13, 2013 9:39 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Thanks plisken for the help. I don't think it is a driver issue as I have 3 "Sager NP-8150" computers with identical configurations (Win7, Firewall, and AV). The other 2 connect perfectly and have the exact same drivers as this machine (also an NP-8150) and I am NOT able to connect with it. I did re...
by TDPsGM
Wed Feb 13, 2013 8:01 pm
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

Sorry plisken, The questions I have are beginning to get mixed up across posts I just answered your post here (where you are also commenting): http://forum.mikrotik.com/viewtopic.php?f=13&t=69766&p=355487#p355487 For ease of reference I have reposted the comment here: Ok, I think that we may be gett...
by TDPsGM
Wed Feb 13, 2013 7:55 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Ok, I think that we may be getting somewhere! I multi boot my machine and I have a perfectly clean installation of Win7 Pro on one of the partitions. When I thought that there was a possible conflict, I booted into THAT machine and tried to connect and had the same issues. It was suggested that I tr...
by TDPsGM
Wed Feb 13, 2013 6:37 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

It is normal, Winbox shows IP address assigned to specific Ethernet port. If address is not assigned Winbox shows '0.0.0.0'. MAC connection works over UDP, check your firewall settings. Also upgrade Win7 NIC drivers, from my experience, outdated drivers are usually main reason of problem. HTH, I ha...
by TDPsGM
Wed Feb 13, 2013 6:30 pm
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

Yes it is the current driver - I am usually pretty anal about that. It is a Jmicron PCI Express Gigabit Ethernet Adapter and I have re-downloaded the latest driver from here: ftp://driver.jmicron.com.tw/Ethernet/Windows/ I don't have an XP machine readily available, but I could create a Virtual Box ...
by TDPsGM
Tue Feb 12, 2013 10:18 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Yes, when I connect to etherport 1, and WHEN the MAC shows up (00:0C:42:54:E1:F2), the IP that is associated with it is 0.0.0.0 Winbox Loader - finds eth1.png When I connect to any other port - for example port 2 - The mack that shows up is (00:0C:42:54:E1:F3), and the IP that appears is 192.168.1.1...
by TDPsGM
Tue Feb 12, 2013 7:35 pm
Forum: Beginner Basics
Topic: Firmware upgrade question
Replies: 9
Views: 2355

Re: Firmware upgrade question

Thanks for the reply honzam. Regarding the How to on this link: http://wiki.mikrotik.com/wiki/Manual:Bootloader_upgrade It says: This command shows the current RouterBOOT version of your device, and available upgrade which is either included in routerboard.npk package . . . . Does that mean it is AL...
by TDPsGM
Tue Feb 12, 2013 6:29 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Is there anyone who can answer these questions? My Questions: 1) How did the router "GET" the Firmware to be upgraded? Did the Router go out to the internet on it's own to get it, or did it come with the latest version of the OS that I installed (v5.23) ? 2) Does upgrading to the latest "BIOS" versi...
by TDPsGM
Tue Feb 12, 2013 6:20 pm
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

Thanks for the reply normis. It is very much appreciated. I multi boot my machine, and I have a perfectly clean version of Windows 7 with no other programs on it. I too thought that this might be the issue as the fellow who helped set it up the router to begin with never seemed to have an issue conn...
by TDPsGM
Mon Feb 11, 2013 8:05 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Thanks pleskin, but I have done that. I have followed the instructions here: http://wiki.mikrotik.com/wiki/Initial_MAC_Winbox_Connection .... I have even set the IP address in the computer and turned off/disabled every other network interface I have. The ability for it to SEE the MAC is very very in...
by TDPsGM
Mon Feb 11, 2013 6:45 pm
Forum: Beginner Basics
Topic: Firmware upgrade question
Replies: 9
Views: 2355

Re: Firmware upgrade question

Thanks plisken.

Where do I go to see if there IS ever a new firmware for the RB450G, and how do I install it if I find it?
by TDPsGM
Mon Feb 11, 2013 6:43 pm
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

I apologize for bumping this, but does anyone have any clue as to why this is 'timing out'?
by TDPsGM
Mon Feb 11, 2013 6:41 pm
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Thanks so much for the help plisken. It seems very hard to get help on this forum (much of the time) if you are new to RouterOS and MikroTik. I am reading online manuals, but they are NOT that helpful much of the time. The answer to your question about the firmware is in my other post here but I am ...
by TDPsGM
Mon Feb 11, 2013 12:32 am
Forum: Beginner Basics
Topic: Firmware upgrade question
Replies: 9
Views: 2355

Firmware upgrade question

Logging in via winbox under the routerboard selection I see this: Routerboard firmware upgrade.png Now I am running v5.23 What does Current version 2.27 mean? What will upgrading to version 3.02 do for me? If I click "Upgrade" will it do it automatically, or does the device have to be connected to t...
by TDPsGM
Mon Feb 11, 2013 12:26 am
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Re: Bios Reset v.s. ROS Reset RB450G v5.23

Is there anyone that can answer this as the manual is REALLY not very clear on it at all.

Assistance would be appreciated. Thanks
by TDPsGM
Sun Feb 10, 2013 3:27 am
Forum: Beginner Basics
Topic: Bios Reset v.s. ROS Reset RB450G v5.23
Replies: 20
Views: 6226

Bios Reset v.s. ROS Reset RB450G v5.23

The manual for the RB450G here: http://routerboard.com/pdf/326/rb450GugA.pdf . . . on page 9 says that the S301 button Loads the backup boot loader. I thought that I read somewhere that it was v3.x 1) Is there any way to confirm what VERSION it is that gets loaded? 2) Is this the button on the side ...
by TDPsGM
Sun Feb 10, 2013 3:13 am
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

I don't know if this is useful but this is what I have showing as being enabled:
MAC server enabled.png
by TDPsGM
Sun Feb 10, 2013 1:41 am
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Re: Winbox Ellipsis "Connects To" Field MAC Table Empty

Thanks for the replies. Just for clarification, I am following these instructions here: http://wiki.mikrotik.com/wiki/Initial_MAC_Winbox_Connection Those instructions suggest that it only works with ether 1 Port though I have been messing around with it and I am having limited , and very INCONSISTEN...
by TDPsGM
Sat Feb 09, 2013 11:43 pm
Forum: Beginner Basics
Topic: Winbox Ellipsis "Connects To" Field MAC Table Empty
Replies: 12
Views: 4733

Winbox Ellipsis "Connects To" Field MAC Table Empty

Using Mikro Tik Winbox Loader v2.2.18 RB450G running version 5.23 I can log in just fine using the IP address 192.168.1.1 in the "Connects To" field; but if I click on the ellipsis, the (MAC Address, IP Address, Identity, Version, Board Name) table is blank. Winbox Loader - no mac.png I have tried e...
by TDPsGM
Mon Jan 21, 2013 7:55 pm
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Re: Assigned Static IP's Not being bound.

I was able to get Bandwidth tracking set up. Whether this was the correct way to do it or not I have NO IDEA, but this seems to be working for now: For what it is worth, I have set the IP for each user in the DHCP Server>Leases, and then created a "Queue" list that has the MAC as the Name and the IP...
by TDPsGM
Sat Jan 19, 2013 7:37 pm
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Re: Assigned Static IP's Not being bound.

Ultimately I'd like to be able to: 1. Monitor Bandwidth usage per user (Sounds like I have to ID them via MAC address because somewhere in the manual or on the forum I had read that doing it via IP address (even if that IP was Statically set to THAT MAC) was not really the "right" way to do it. 2. B...
by TDPsGM
Sat Jan 19, 2013 7:25 pm
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Re: Assigned Static IP's Not being bound.

Wow, I can't believe it took me this long to get back to it. I finally have put the router back into the system to see if I can get it working properly. fewi: I hope you are still around to take a look at this. (I have upgraded to v5.22 by the way) /interface print detail Flags: D - dynamic, X - dis...
by TDPsGM
Fri Jan 18, 2013 6:52 pm
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

FYI - The caching issues that I was having seemed to have been fixed. Thanks for the fix guys! (running v5.22 now with this post).
by TDPsGM
Mon Oct 01, 2012 1:00 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

I sure hope they can get on this as I am starting to think about walking away. I don't want to, but I am tired of having to flush my DNS Cache every time I touch ANYTHING that has to do with information being streamed from Amazon S3 Storage. I basically have to leave Winbox open and minimized so tha...
by TDPsGM
Mon Oct 01, 2012 12:13 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

Have we made any headway on this issue?

It's been kinda quiet for a while, and I am regularly having to still clear the DNS cache to make it work.

Thanks.
by TDPsGM
Mon Sep 10, 2012 1:04 am
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

I am seeing it with OpenDNS right now too:
208.67.222.222
208.67.220.220
by TDPsGM
Sat Sep 08, 2012 9:16 pm
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

The above images were with regard to a specific bucket.

I don't know if this helps, but
this is just a couple of minutes later, and it can't resolve with my Amazon S3 Account as a whole now without clearing the DNS Cache:
amazonS3browserFailure2.png
amazonS3browserFailure_Diagnosics2.png
by TDPsGM
Sat Sep 08, 2012 8:58 pm
Forum: General
Topic: Mikrotik DNS server issues with Amazon S3 - low TTL 60sec
Replies: 118
Views: 46517

Re: Mikrotik DNS server issues with Amazon S3 - low TTL 60se

Another VERY consistent reoccurring issue is using the 'Amazons S3 Browser' to go directly to your 'Amazon S3 Storage Buckets' to manage your files! If I Flush My MicroTik Router DNS Cache Then we are off to the races . . . for a couple of minutes anyway. Close it and come back, and we are back to s...
by TDPsGM
Sun Nov 27, 2011 3:22 am
Forum: Beginner Basics
Topic: How can I see all the IP'c connected to the router
Replies: 8
Views: 28593

Re: How can I see all the IP'c connected to the router

No, I was not trying to troubleshoot anything (yet). All I wanted to do was to be able to see who is currently online on the network at this very moment. I do not (at this moment) care which DHCP leases have been handed out in the last couple of days as this does not tell me which computer is online...
by TDPsGM
Sun Nov 27, 2011 1:58 am
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11715

Re: Assigning Static IP's & Client ID's

Did you check Your Interface arp property?
Where would I do this exactly?

Thanks again for the help.
by TDPsGM
Sun Nov 27, 2011 1:55 am
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Re: Assigned Static IP's Not being bound.

Sorry for bumping this, but does anyone have any idea here?

Again thank you for help.
by TDPsGM
Sun Nov 27, 2011 1:53 am
Forum: Beginner Basics
Topic: How can I see all the IP'c connected to the router
Replies: 8
Views: 28593

Re: How can I see all the IP'c connected to the router

Thanks fewi. I was tinkering with the lease times. (This is under IP / DHCP Server / and the "Expires After" column ) I set them to 10 minutes just to see what would happen. Initially it looked like if a computer signed on to the network that the timer would start counting down from that 10 minute m...
by TDPsGM
Sun Nov 27, 2011 1:25 am
Forum: Beginner Basics
Topic: How can I see all the IP'c connected to the router
Replies: 8
Views: 28593

Re: How can I see all the IP'c connected to the router

you can check your arp list>> IP arp Or you can scan all IPs which in the same network of your router IP. Unless I am reading this wrong, does that not just show the leases that were handed out? If a certain machine connected and then left the network it would still show in this list ( at least tha...
by TDPsGM
Wed Nov 23, 2011 8:40 pm
Forum: Beginner Basics
Topic: Assigned Static IP's Not being bound.
Replies: 7
Views: 2877

Assigned Static IP's Not being bound.

As per the image that I have attached: The 2 lines that you see in the picture are for the same machine. Prior to this machine being connected to the network I knew what the MAC address was and wanted to assign it a STATIC IP. So I have preconfigured the router with what you see. When it was connect...
by TDPsGM
Thu Nov 03, 2011 2:09 pm
Forum: Beginner Basics
Topic: Firewall settings - Browser interface v.s. winbox interface
Replies: 6
Views: 1351

Re: Firewall settings - Browser interface v.s. winbox interf

Yep, I knew I needed to do that (as per my signature - which I need to change because practically the next day 5.8 came out). I am coming off of big box store routers and trying to get something with a little more capability. A friend set this up for me a number of months ago and I am just getting a...
by TDPsGM
Wed Nov 02, 2011 10:11 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11715

Re: Assigning Static IP's & Client ID's

I do, but the IP is being delivered by the Router Dynamically. Dynamic=yes
Try setting the the IP to an IP of 'your' choosing and tell me what happens.

Thanks for the reply!
by TDPsGM
Wed Nov 02, 2011 9:22 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11715

Re: Assigning Static IP's & Client ID's

Thanks for the response. I appreciate the help. Q1: Check your knowledge with http://wiki.mikrotik.com/wiki/Manual:IP/DHCP_Server Caller Id is not too important in basic setting. I sort of figured that the Client ID was not that important, but for some reason that I don't understand yet if I don't h...
by TDPsGM
Wed Nov 02, 2011 7:34 pm
Forum: Beginner Basics
Topic: Assigning Static IP's & Client ID's
Replies: 7
Views: 11715

Assigning Static IP's & Client ID's

I am trying convert all my settings from my old router to the new one (specifically the Static IP settings). The issue that I am having is that I don't really understand the Client ID part of it. Question 1: How does the Client ID get determined, and can I not manually edit it? It seems that if it i...
by TDPsGM
Wed Nov 02, 2011 7:25 pm
Forum: Beginner Basics
Topic: Firewall settings - Browser interface v.s. winbox interface
Replies: 6
Views: 1351

Firewall settings - Browser interface v.s. winbox interface

I a just going through the motions of learning to use my new router. I noticed that there are settings in the Firewall area of the browser interface (see attached image - router settings.gif). Where are these located in the winbox settings? I can't seem to find their equivalent. and could you clarif...
by TDPsGM
Wed Nov 02, 2011 7:06 pm
Forum: Beginner Basics
Topic: Current Setting Saved While updating the os
Replies: 3
Views: 541

Re: Current Setting Saved While updating the os

I just noticed that there is an option to do the upgrade as well via the browser interface. Does that work just as well or is it recommended to use the winbox interface?
by TDPsGM
Mon Oct 31, 2011 5:12 pm
Forum: Beginner Basics
Topic: Current Setting Saved While updating the os
Replies: 3
Views: 541

Current Setting Saved While updating the os

I received a Mikrotik RB450G a little while back that had the basics set up for me. If I am reading this right the current version is v4.11 and looks like I have a license key that is good to version 7.x (Please see the attached upgrading.gif) Is this where I put the v5.7 that is currently available...