When I read stuff like this I get a little mad with myself. Why oooo why did I not think of this! I will implement this on the main resolver at once.At the end the graph jumps down. Is that just disabling verification or a reboot? So would a scheduled disable and enable work around the issue?
No not this one but the previous one 6.48.1 fixed that issue if we are talking about issues that where added into 6.48 release.The new update fix the RB3011's port flapping?
What's new in 6.49beta22 (2021-Mar-08 09:07): Changes in this release: *) crs3xx - improved 1Gbps Ethernet port group traffic forwarding for CRS354 devices;
It's this oneWhat about RB3011 port flapping re-introduced in 6.48?
) switch - fixed interface toggling for devices with multiple QCA8337, Atheros8327 or RTL8367 switch chips (introduced in v6.48);
Either keep this blog up to date (which is not what is happening now) or shut it down.*) hotspot - fixed special character parsing in "target" variable (CVE-2021-3014);
*) switch - fixed interface toggling for devices with multiple QCA8337, Atheros8327 or RTL8367 switch chips (introduced in v6.48);
So it may be but we are not marwell customers but Mikrotik customers so we are affected how MT handle this.It's not the Mikrotik's fault.
The Marvell chip manufacturer is responsible for this.
Thanks for the clarification.Currently only the long-term version channel (v6.46.7) has all the necessary fixes for this CVE. We are working on getting them published in stable and testing channels as well. Sorry for any inconvenience.
I might be off here but my understanding is that this is a feature in the Linux kernel and version 6 will not upgrade the kernel without major overall I think this will be a V7 feature we have to wait for,MikroTik is there any chance to add wireguard in v6?
Well that sucks. Have you created a supout during the issues and sent to MT?Installed beta27
Worked for ~12 hours
Then the problem came again
It works more if there's only a few ports busy or traffic is low
Now all can test :)What's new in 6.48beta27 (2020-Aug-18 06:20):
Changes in this release:
*) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
E-mail support and you will get access to the version that way. I would never run anything I can download outside official channels.6.48beta12 I still have a problem! Please attach 6.48beta23
Tested this and I have no issues with this so this might be related to your setup.Great!
But Winbox CRASH DOWN, when Press + under System -> IPsec-> Policies.
Please fix that bug...
No I don't think you have to do that. You should try Netinstall and reinstall the OS on the router. Google around there are briliant guides out there how to use Netinstall.I guess i should Trash-Can it?
Don't forget to update the Security blog. During writing this the blog has not been updated.*) security - fixed vulnerability for routers with default password (limited to Wireless Wire), admin could login on startup with empty password before default configuration script was fully loaded;
Is that not like saying "The surgery went well but he died"?Update when smooth, but NAT rules no longer work.
You can download via the download page./system package update check-for-updates
status: System is already up to date
The 6.45.3 is not available yet!
No both of mine are just fine. Have you updated firmware and rebooted a second time?After upgrading my RB3011, one of the CPUs peeks at 100% all the time (switches back and forth between CPUs). Anyone else with the same problem?
I have dynamic IP on both sides and still use GRE. I have a script that checks every 5 min if my IP has changed and If so changes my IP on the GRE interface. Works like a charm.I have to add that only one side has a fixed IP, so GRE won't work. Thank you anyway...
But he said MB not MbitI do not have fast track on a 750Gr3 and are able to transfer 250Mbps. OP does only get 23Mbps,so its not only fast track.
So sorry but I could not just contain myself Not that I'm missing V7 I just follow the forumNo, major misunderstanding
Not "it will be fixed in v7", but "It can only be fixed in v7".
What's new in 6.40.8 (2018-Apr-23 11:34):
!) winbox - fixed vulnerability that allowed to gain access to an unsecured router;
You need Winbox 3.14Big problem...
Updated Mys CCR (to 6,43rc27) an now stucked outside! All is running but cant connect - wrong username or password??? A bit of PANIC!!!
Sorry! Had two winbox on my pc!! Just need new winbox! Sorry!
I have updated two 3011 without issues. My guess is netinstall for you.Install and upgrade via packages menu option crashed my 3011. Anyone else have issues. Now in constant boot loop. Cannot launch kernel. Any recommended next steps ?