After a lot of attempts, I found disabling the bridge STP protocol improving the speed, from ~840 Mbps to ~900 Mbps. This is the only thing I found useful now, a lot closer to the max speed of 940 Mbps now. Are You testing the speed with a single connection? Try with more than one (torrent is an op...
So now my problem would be whether I need a better model. No, you don't need a better model. You need to configure FastTrack and you will able to reach 1Gbps. As you can see from my config in the first post. I already enabled Fasttrack. And don't forget the three location where FastPath is defined....
Hello, Based on your setup, you may get less than gig. If you look at the gr3 specs, you'll see that with filters and bridges, throughput goes down depending on packet size. Regards Sent from Tapatalk Is there anything I can do to get the full speed on RB750Gr3? I am keeping the minimum setting as ...
Hello, Based on your setup, you may get less than gig. If you look at the gr3 specs, you'll see that with filters and bridges, throughput goes down depending on packet size. Regards Sent from Tapatalk Is there anything I can do to get the full speed on RB750Gr3? I am keeping the minimum setting as ...
I have a gigabit connection from my ISP. When I connect the fiber modem to my iMac directly and make PPPoE connection on iMac, I can get 940 Mbps on speedtest.net. But when I go through RB750Gr3 as a router to do the PPPoE connection, the max speed I can get is only around 800 Mbps and sometimes muc...
My first WAN connection is a PPPoE over vLan connection bridged with a DSL modem, I tried to create second WAN connection with another PPPoE account over the same vLan but they are not able to stay connected simultaneously. When second PPPoE client is connected, the first one will be terminated and ...