Is there any solution for this problem? I have the same issue with 6.43.2 (I know it is a little bit old ROS version, but the last change with the dude was in the 6.43). I am using the dude with a x86 VM (under proxmox), the CPU usage is 0% until I start the dude. After that all CPUs are 100% loaded...

Hello! If you want to know whether you use hardware accelerated ipsec or not, just check: /ip ipsec installed-sa print If you see the H flag, it means the ipsec connection is hardware accelerated, otherwise the CPU handles it. A tip for the throughput problem: Try to disable fast-track rules in your...

I have the same problem with Capsman + cAP ac devices. The Capsman manager runs on an RB1100AHx4 dude edition. I have tried already 6.42.7, 6.43.2, 6.43.4 ROS versions, but the problem still exists. Do you have any solution or workaround, that can eliminate or at least decrease this annoying phenome...

Thank you for your advice! I have successfully upgraded POE fw. by your method. It shows the output currents already.

Have you tried this? or Maybe that will help...

Greetings, We have several RB750UPs in our system. Some of these devices show the output currents of POE capable ports (POE fw 2.13), while others don't show them (POE fw 2.1). The difference between these devices is the POE firmware only, because both types have RouterOS v6.27. Older ROS versions h...

Hi! I would like to try the multi-queue-ethernet-default queue type on my pppoe server (CCR1009 / ROS v6.25). If I set the queue type to multi-queue-ethernet-default, I have got these error messages in log: could not add queue: download-queue kind=mq-pfifo not allowed (6) Why? What's wrong with this...

Greetings!

I have a question about the capsman auto frequency feature. Does the capsman have the ability to change the AP's channel frequency when the conditions are changing, without disabling/enabling it? Or the capsman selects the best channel ONLY when an AP starts?

Hello,

Is there any solution for this issue? I have the same problem with a RB2011UAS-RM (ROS v5.25). The ip/proxy is disabled but the "/store print" lists an active web-proxy item, which is not removable.

I have tried the manual setting, to fine tuning the radio in each modulation type. It works well any other board except RB 911.

Hi all, We had changed some single polarized (Metal Groove) ptp links into dual polarized RB 911 links. We had used manual tx power settings on the Metal Grooves to decrease the tx power. It worked well, but since when we have been using the new RB 911's, we can't decrease the tx power. If I set the...

We have problem with our CCR1036 bridge function. It's slightly different issue than what has been already discussed here in this topic by sx10 or by midsizewisp. There is only one rstp bridge is defined in our router with 6 ports: ether1, ether3, ether10, ether11, sfp3, sfp4. Currently only the eth...

Hi all! The ROS 5.21 version doesn't show the sfp-rate, when I use the following command: / interface ethernet print detail This was the output in 5.20, with same command Flags: X - disabled, R - running, S - slave 0 ;;; RB (Zyxel duplex sfp modul) name="sfp1" mtu=1500 l2mtu=1598 mac-addre...

Hi! We are using many dozens of MikroTik RB based hotspots (100+) and few (but only FEW) of them has the same problem. There is another topic here in the forum, which has described similar sympthoms: http://forum.mikrotik.com/viewtopic.php?f=2&t=44943&p=226485&hilit=hotspot+stops#p226485...

Hi guys! I've experienced same problem with RB435G and RB493G. The problem occurs random times (sometimes 3 times in a day, sometimes 1 time in a week). There is no rx packets on one or more ethernet ports. It is totally random which ports are in trouble. First sight, all is well because the interfa...

One more thing what I noticed: when I was using the RB493G the eth port freezing concerned either the 1,6,7,8,9 ports, or 2,3,4,5 ports. RB493G has 2 switch chips, the switch1 handles, the 1,6,7,8,9 ports, and the switch2 handles the rest. It never occurred, that all make mistakes, always one or the...

Hello Wirelessrudy, I've read your posts for 2 or 3 weeks ago, but I think that my problem might be different than yours. If I remember correctly, you've described that your eth interfaces are flapping. Does it mean the data flow is interrupted and then continues on its own, doesn't it? But in my ca...

I'm not alone with this issue. I think, I've exactly the same problem like described here: http://forum.mikrotik.com/viewtopic.php?f=2&t=56502&p=289601#p289601 I've tried two RB493G's and two RB435G's and the ethernet port freezes always appearing. Currently the RB435G's are in use. Both of ...

Hi, also test the NV2 in version 5.9 and I see great improvement. As for stability, speed and response. When using longer NV2 does not reduce the signal. Which RouterBOARD you have a problem with Ethernet? RB435G, but if u look at my URL post in message u'll see many somekind similar problems of ma...

I have experienced this problem since when I changed the original set (RB411AH+Allied Telesyn AT8024 L2 switch) into these RB493G's.

I haven't found absolutely nothing in the log yet. But only the critical, error, info and warning topics had been switched on at the /system/logging. What topic(s) is(are) relevant in this case? Interface? I've just enabled it.

It's unbelievable! I've changed yesterday the original RB493G to another one and I've reconfigured this new board from default (empty) settings. The ethernet lockup problem still exist. What the hell is going on? I've no idea how can I solve this...

I've changed the power supply yet, but experiencing same symptoms unfortunately.
I'm using these packages on RB493G:
advanced-tools
routerboard
routing
security
system
wireless
All the others have disabled. I will change this board to another RB493G today afternoon.

Hi! I think it is one or more L2 switch(es) between your mikrotik based x86 router and /18 network subscribers, isn't it? If it's true, it may be a mac table overflowing on that L2 switch which is connecting to your mikrotik router. When you change the mac of your router's interface, you force the s...

Have you seen the /tool/profile? It shows the cpu usage of processes. You can check that which process use the most cpu time.

I have some trouble with my RB-493G's ethernet ports. The problem occurs random times (sometimes 3 times in a day, sometimes 1 time in a week). There is no rx packets on one or more ethernet ports. It is totally random which ports are in trouble. First sight, all is well because the interface has R ...