Community discussions

Search found 200 matches

by TonyJr
Fri Sep 27, 2019 10:00 am
Forum: General
Topic: Ability to Use Development Branch for v7 Betas [SOLVED]
Replies: 3
Views: 496

Re: Ability to Use Development Branch for v7 Betas [SOLVED]

To answer your question.

We will use the development branch when all of the architectures and packages will become available. So far, only ARM and CHR are available.
Thank you, normis.
by TonyJr
Thu Sep 26, 2019 9:14 pm
Forum: General
Topic: Ability to Use Development Branch for v7 Betas [SOLVED]
Replies: 3
Views: 496

Ability to Use Development Branch for v7 Betas [SOLVED]

Hello,

With the recently released public betas of v7, will we be able to use the system-packages menu, and set it to development branch now, or is this still only for internal testing?

TonyJr
by TonyJr
Wed Sep 12, 2018 3:44 am
Forum: Announcements
Topic: Newsletter #84
Replies: 47
Views: 12846

Re: Newsletter #84

The exponential growth of MikroTik is always suprising me. You are all doing an excellent job there and I am very excited to see these products launch. I wonder what else is in the works...

Huge thanks to you all at MikroTik!
by TonyJr
Sun Nov 19, 2017 4:10 pm
Forum: General
Topic: UK 5.8GHz Spectrum
Replies: 2
Views: 435

UK 5.8GHz Spectrum

Hello,

Has RouterOS been updated to align with being able to use 5.8GHz in the UK? https://www.ofcom.org.uk/__data/assets/ ... ations.pdf

Tony
by TonyJr
Tue May 23, 2017 8:53 pm
Forum: Wireless Networking
Topic: CAPsMAN wireless network issues
Replies: 6
Views: 3567

Re: CAPsMAN wireless network issues

I currently have a ticket open related to the group key timeout problem. I am only experiencing the problem with Cisco 7925g wireless ip phones. I will post the outcome wether it is solved or not here. They used to work fine a few versions ago, but cannot remember which version exactly. What problem...
by TonyJr
Wed May 17, 2017 7:26 pm
Forum: General
Topic: How to isolate wireless multicasts? Any Ideas?
Replies: 3
Views: 456

Re: How to isolate wireless multicasts? Any Ideas?

For this you will require a proprietary wireless video link from cameramen to base station, and from the video outputs there, you can have the encoders convert to multicast to a wired network. I use encoders/decoders that work exactly as you describe using multicast requiring separate vlans. They wi...
by TonyJr
Tue Apr 25, 2017 6:38 pm
Forum: General
Topic: Provisioning hundreds of devices, what's the best approach?
Replies: 2
Views: 1102

Re: Provisioning hundreds of devices, what's the best approach?

Have you looked into TR-069? The client was recently added to RouterOS and there is a good thread on the Forum somewhere with a tutorial.

TonyJr
by TonyJr
Fri Dec 23, 2016 3:22 am
Forum: General
Topic: taking notes inside winbox
Replies: 8
Views: 1144

Re: taking notes inside winbox

I see where you are coming from. Rather than being able to make individual notes in different locations, how about a general 'notepad'?
by TonyJr
Fri Dec 23, 2016 3:19 am
Forum: Wireless Networking
Topic: Why metal 2shpn interrupt signal when the top of the tower height ?
Replies: 4
Views: 729

Re: Why metal 2shpn interrupt signal when the top of the tower height ?

What are the results of a spectrum scan at the top height? There are too many factors to list that could cause this - what do you know about the site and any neighbouring sites? That may be a start.
by TonyJr
Fri Dec 23, 2016 3:16 am
Forum: General
Topic: Cannot Paste
Replies: 3
Views: 1575

Re: Cannot Paste

It would better to paste using a terminal client ssh or telnet by recommendation.
by TonyJr
Wed Sep 14, 2016 7:23 am
Forum: General
Topic: IPv6 - Two prefixes on one network
Replies: 1
Views: 367

IPv6 - Two prefixes on one network

Hello, I currently have a a 6in4 he.net tunnel with a /48 prefix for IPv6 connectivity. I shall be given native IPv6 connectivity from my ISP soon, with a /56 via DHCPv6 PD. On each network I use a /64 via slaac RAs. My question is - can I use both the he.net tunnel-based /64 and the native ISP-base...
by TonyJr
Tue Aug 16, 2016 6:20 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57190

Re: v6.37rc [release candidate] is released, only one wireless package!

*) sstp - fixed disconnects on transmit for multicore systems; Thank you for this fix - site-to-site VPN is now stable between a CCR1009-8G-1S-1S+-PC and a CRS109-8G-1S-2HnD with 6.37rc16. I had thought the problem was with my configuration, until I saw the changelog. The connection would previously...
by TonyJr
Wed Jul 27, 2016 8:29 pm
Forum: Announcements
Topic: v6.37rc [release candidate] is released, only one wireless package!
Replies: 321
Views: 57190

Re: v6.37rc [release candidate] is released, only one wireless package!

Hello, I have just performed an upgrade from 6.36 to 6.37rc5, original packages were the routeros bundle with combined wireless-cm2 disabled, and the separate wireless-rep package installed and enabled. The process works fine, however it takes approximately four times longer to complete. I was wonde...
by TonyJr
Mon Jul 04, 2016 12:38 am
Forum: Wireless Networking
Topic: 160M Cable run in beautiful South Island Alps of New Zealand
Replies: 1
Views: 564

Re: 160M Cable run in beautiful South Island Alps of New Zealand

Good video. I also like the go-kart with the gopro and wireless repeater. If I still raced, I would have to make myself one of those!
by TonyJr
Wed Jun 01, 2016 1:50 am
Forum: General
Topic: Forum: Option to report post as spam seems to be missing
Replies: 2
Views: 566

Re: Forum: Option to report post as spam seems to be missing

x.jpg
Thanks - it looks like I do need some glasses after all.

TonyJr
by TonyJr
Tue May 31, 2016 12:41 am
Forum: General
Topic: Deep Packet Inspection (DPI)
Replies: 22
Views: 13409

Re: Deep Packet Inspection (DPI)

There are many posts on the forum regarding facebook and youtube filtering. However they now mainly use HTTPS which leads you to a dead end. Please however keep this topic active and search for more as it would be beneficial for many providers to be able to shape this kind of traffic (even if the co...
by TonyJr
Mon May 30, 2016 7:44 pm
Forum: General
Topic: Fasttrack and QOS
Replies: 4
Views: 1984

Re: Fasttrack and QOS

by TonyJr
Mon May 30, 2016 7:43 pm
Forum: General
Topic: Fasttrack and QOS
Replies: 4
Views: 1984

Re: Fasttrack and QOS

http://wiki.mikrotik.com/wiki/Manual:Packet_Flow_v6 I can't find the fasttrack diagram, but the explanation which will show differences is here: http://www.mikrotik.com/download/share/FastTrack.pdf http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description I suppose it is easier to say that you...
by TonyJr
Mon May 30, 2016 7:39 pm
Forum: General
Topic: Fasttrack and QOS
Replies: 4
Views: 1984

Re: Fasttrack and QOS

If you have a look at the packet flow diagrams and the fast track packet flow diagrams, you will see the difference. I will find them now and post a reply.

TonyJr
by TonyJr
Mon May 30, 2016 7:38 pm
Forum: General
Topic: Forum: Option to report post as spam seems to be missing
Replies: 2
Views: 566

Forum: Option to report post as spam seems to be missing

Hello,

I hope that I am not becoming visually impaired and need glasses, but I cannot find the link to report a post as spam. Is it still there or has it actually disappeared?

TonyJr
by TonyJr
Mon May 30, 2016 7:29 pm
Forum: General
Topic: Tag untagged traffic on trunk
Replies: 2
Views: 457

Re: Tag untagged traffic on trunk

On the physical port that connects to the TP-link devices, add to a bridge that also contains the vlan101 from the same port. You should only need to do this once/on one device. Be careful, because all untagged traffic on this port, will be accessible through vlan101 and vice-versa, unless you do so...
by TonyJr
Mon May 30, 2016 7:20 pm
Forum: General
Topic: Deep Packet Inspection (DPI)
Replies: 22
Views: 13409

Re: Deep Packet Inspection (DPI)

RouterOS can perform Layer 7 inspection of packets.

TonyJr
by TonyJr
Mon May 30, 2016 7:15 pm
Forum: RouterBOARD hardware
Topic: Need SFP for long link compatable with Mikrotik CCR
Replies: 2
Views: 771

Re: Need SFP for long link compatable with Mikrotik CCR

I don't know if this of use to you, but there is a compatibility list here: http://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table A quick google brings this Finsair SFP - https://www.finisar.com/optical-transceivers/fwlf16197dxx From reading, Finsair seem to work with a lot of device...
by TonyJr
Mon May 30, 2016 7:10 pm
Forum: General
Topic: Hotspot - Login by: MAC
Replies: 1
Views: 1064

Re: Hotspot - Login by: MAC

http://wiki.mikrotik.com/wiki/User_Mana ... entication

This is all I could find, but requires user manager. Also note the second code snipped should begin with /tool and not /too .

TonyJr
by TonyJr
Mon May 30, 2016 7:04 pm
Forum: General
Topic: Which router should I buy?
Replies: 3
Views: 696

Re: Which router should I buy?

The one with the two SFP+ ports. For future expansion and to be able to use the full potential of the device. I also believe that the SFP+ ports can be used with standard SFPs in the meantime - does anyone know if this is true?

TonyJr
by TonyJr
Mon May 30, 2016 7:01 pm
Forum: Wireless Networking
Topic: "Management frame protection" - 802.11w compatibility
Replies: 10
Views: 3553

Re: "Management frame protection" - 802.11w compatibility

Good post - i'd like to find out more about the implementation of management frame protection too.

TonyJr
by TonyJr
Mon May 30, 2016 6:59 pm
Forum: General
Topic: wAP compatible with CAPSMan
Replies: 1
Views: 501

Re: wAP compatible with CAPSMan

Yes, they work fine with CAPsMAN. I got two of the new wAP ACs late last week and used the 'reset' button method to enable CAPs on them. It worked, but here's a heads-up - The 2.4GHz radio does not get added to the list of interfaces in CAPs that are available to be configured by CAPsMAN. You have t...
by TonyJr
Mon May 30, 2016 6:52 pm
Forum: General
Topic: VPN LAN Gaming
Replies: 2
Views: 477

Re: VPN LAN Gaming

You could try setting the VPN to be on the same subnet as your LAN.

TonyJr
by TonyJr
Mon May 30, 2016 6:49 pm
Forum: Beginner Basics
Topic: CCR 1009-8g-15 as Captive Portal
Replies: 2
Views: 557

Re: CCR 1009-8g-15 as Captive Portal

Are you authenticating via radius or you already have another captive portal on VLAN 105? You can configure Hotspot to use RADIUS. You can also remove the DHCP server as long as you use a new one or DHCP Relay, but it may break Hotspot, if the configuration for Hotspot does not reflect the IP subnet...
by TonyJr
Mon May 30, 2016 6:43 pm
Forum: Wireless Networking
Topic: Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2
Replies: 2
Views: 927

Re: Having trouble setting up capstan v2 with new wAP ac / ros 6.35.2

Hmm. Have you tried clearing the CAPs and CAPsMAN configuration and starting from scratch, then slowly add each configuration until you get the error? If you have upgraded, sometimes the previous configuration is not liked by the newer packages etc.. Also, try using the new wireless-rep packages on ...
by TonyJr
Mon May 30, 2016 6:32 pm
Forum: Wireless Networking
Topic: how to isolate bridge ports to talk to each other to prevent ARP scanning on hotspot
Replies: 1
Views: 873

Re: how to isolate bridge ports to talk to each other to prevent ARP scanning on hotspot

Off of the top of my head - bridge port horizon is the setting you need. You either have to have the ports on the bridge have the same horizon number, or all different (I am not sure which one - it is a while since I read that part of the manual). Please correct me if I am wrong.

TonyJr
by TonyJr
Mon May 30, 2016 6:25 pm
Forum: Wireless Networking
Topic: WiFi beacon
Replies: 3
Views: 955

Re: WiFi beacon

Leave it as BGN - there may be a wireless device that struggles with N only mode.

TonyJr
by TonyJr
Mon May 30, 2016 6:21 pm
Forum: Wireless Networking
Topic: How do you weather proof your feed horn cables?
Replies: 5
Views: 1146

Re: How do you weather proof your feed horn cables?

Self amalgamating tape is also used within aircraft to seal bayonet and screw type electrical connectors from all types of fluid ingress, extremes of temperature and as a mechanical protection from vibration. It works very well there, you don't need more than one layer, but it does not cause harm if...
by TonyJr
Fri Apr 08, 2016 7:31 pm
Forum: General
Topic: Issue with ACLs on this forum ?
Replies: 7
Views: 1100

Re: Issue with ACLs on this forum ?

I was just going to report this too - I wondered why there were topics popping up in global announcements asking for help. Surprisingly it did not get abused.

TonyJr
by TonyJr
Mon Dec 14, 2015 1:07 am
Forum: The Dude
Topic: The Dude is back! v6.34rc test build released
Replies: 269
Views: 74244

Re: The Dude is back! v6.34rc test build released

Hello, here are a few observations and thoughts for Dude: Fix request: DIsplay and monitoring of 10 GBit interfaces - interface maximum speed is limited at about 4 GBit in Dude at the moment. Please increase this limit. Also a link profile for 10 GBit links added by default. Feature request: Update ...
by TonyJr
Sat Sep 12, 2015 10:24 am
Forum: Announcements
Topic: v6.32.1 released
Replies: 76
Views: 19016

Re: v6.32.1 released

Has anything to do with PIM been fixed? After upgrading all of my devices from 6.2 to 6.2.1 I notice that for the first time, BLF buttons are working on my local IP phones, for phones that are at a site connected by a SSTP tunnel with PIM setup. Also group paging works to that site now, which uses m...
by TonyJr
Wed Sep 09, 2015 5:33 pm
Forum: Wireless Networking
Topic: CAPsMAN and 4 CAP devices
Replies: 13
Views: 2269

Re: CAPsMAN and 4 CAP devices

On the capsman device, try setting the IP address to interface vlan10br instead of VLAN10. This can cause issues.
by TonyJr
Wed Sep 09, 2015 5:52 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

Can you draw a diagram at all?
Image
http://im85.gulfup.com/902W3C.jpg
where is the gameserver?
edit: thank you
by TonyJr
Wed Sep 09, 2015 5:31 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

Can you draw a diagram at all?
by TonyJr
Wed Sep 09, 2015 5:29 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

no, only on the router setup with hotspot. the other device should have no firewall or filters ideally.
by TonyJr
Wed Sep 09, 2015 5:10 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

To allow hotspot authenticated users access to your game server, add the following rule(s) under ip->firewall->filter rules: chain=forward in-interface="hotspot WiFi interface" dst-address="ip of game server" protocol=tcp/udp dst-port="game ports separated by comma" action=accept Don't forget you a...
by TonyJr
Wed Sep 09, 2015 4:35 am
Forum: General
Topic: winbox + windows 7 i can't detect ipv6
Replies: 1
Views: 366

Re: winbox + windows 7 i can't detect ipv6

I have windows 7 64bit i can't detect ipv6 on winbox 2.2.18 and 3.0rc12

i have linux and it detects ipv6

what to check ?
what to do ?
check windows has a valid ipv6 address via ipconfig on windows

tonyjr
by TonyJr
Wed Sep 09, 2015 4:33 am
Forum: General
Topic: how to forward ports ?
Replies: 2
Views: 480

Re: how to forward ports ?

Hi everybody how are you i want to setup a game server for call of duty 2 on my routerboard so the users connected to it can play together anybody has an idea how to do that ? these are the ports and the protocols 28960 tcp,udp Call of Duty 2 Common Call of Duty 2 (PC Version) (unofficial) 20500,20...
by TonyJr
Wed Sep 09, 2015 4:31 am
Forum: General
Topic: Cannot acces reuter settings.
Replies: 1
Views: 279

Re: Cannot acces reuter settings.

Hi, I used my reuter 951 for the first time since i got to new appartment and logged in with no problem to ip 192.168.88.1. After configuring few setting few times I cant acees it anymore. When I put 192.168.88.1 into browser I get massege error connection timed out. What ip should I try? Hold dowe...
by TonyJr
Wed Sep 09, 2015 4:27 am
Forum: Wireless Networking
Topic: CAPsMAN and 4 CAP devices
Replies: 13
Views: 2269

Re: CAPsMAN and 4 CAP devices

have you enabled cm2 package and rebooted all devices?
by TonyJr
Wed Sep 09, 2015 4:25 am
Forum: General
Topic: ipsec road warrior android
Replies: 3
Views: 676

Re: ipsec road warrior android

Hello Everyone, Having issue where I created profile with IPsec Road Warrior connection for android clients, but can't access any resources on LAN or Server Subnet. Clients connects without any issues. I created ipsec chain and ESP with NAT-T marking connection in mangle table to make sure allow on...
by TonyJr
Wed Sep 09, 2015 4:19 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

To allow hotspot authenticated users access to your game server, add the following rule(s) under ip->firewall->filter rules: chain=forward in-interface="hotspot WiFi interface" dst-address="ip of game server" protocol=tcp/udp dst-port="game ports separated by comma" action=accept Don't forget you al...
by TonyJr
Wed Sep 09, 2015 4:12 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

OK in IP->hotspot->walled garden click add, then add your game server ip ad dst address. add the required ports, separated by comma in the dst port box. I think that will work.

But this will be for unauthenticated users. If you want only authenticated users to use it, let me know.

tony
by TonyJr
Wed Sep 09, 2015 4:11 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

OK in IP->hotspot->walled garden click add, then add your game server ip ad dst address. add the required ports, separated by comma in the dst port box. I think that will work.
by TonyJr
Wed Sep 09, 2015 4:03 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

Thanx Tony but how can i do that !!!
I have not tried myself. I will have a look after having a smoke and report back.
by TonyJr
Wed Sep 09, 2015 4:01 am
Forum: Beginner Basics
Topic: Port Forwarding Woes
Replies: 8
Views: 1423

Re: Port Forwarding Woes

Good evening, I recently purchased my first routerboard, an RB2011UiAS-RM, and am _very_ pleased with it except for one challenge that I haven't been able to resolve. Please forgive me if I've overlooked something obvious. I'm replacing a router running DD-WRT that performs very poorly, but as I'm ...
by TonyJr
Wed Sep 09, 2015 3:53 am
Forum: Beginner Basics
Topic: Expert Advice Needed
Replies: 1
Views: 600

Re: Expert Advice Needed

Dear All, I'm studying MT forum for approximate 1 and half a year. Now I've start my WISP project that's why I need Expert Advice. Please help me the regarding issues... I want to use RB1100AHX2 as my principal router to manage approximately 100 PPPoE and 200 Hotspot client both are using Mikrotik ...
by TonyJr
Wed Sep 09, 2015 3:41 am
Forum: Beginner Basics
Topic: 802.3ad between crs109-8g-1s-2hnd-in and esxi 6
Replies: 1
Views: 594

Re: 802.3ad between crs109-8g-1s-2hnd-in and esxi 6

Dear all, I have a vmware lab with 2 esxi 6 connected to a crs109-8g-1s-2hnd-in, have some trunks and vlan working (i dont know if the config is correct but is working) :D But my bounding (802.3ad is not working), the speed is from 1 link, and when 1 link i down i lost connectivity This is my confi...
by TonyJr
Wed Sep 09, 2015 3:37 am
Forum: Beginner Basics
Topic: Mikrotik hAP lite SOS
Replies: 2
Views: 611

Re: Mikrotik hAP lite SOS

Good evening, I want a help. I have a hAP lite and I want the following ! Becoming simply "switch" over having pptp server! What I mean! Comes an Ethernet to the Internet interface ! 192.168.2.100 the other ports become simple switch on this subnet without the mikrotik be a dhcp server! subnet: 192...
by TonyJr
Wed Sep 09, 2015 3:35 am
Forum: Beginner Basics
Topic: Mikrotik cloud core router CCR-1009-8G-15-15+
Replies: 1
Views: 2096

Re: Mikrotik cloud core router CCR-1009-8G-15-15+

I have mikrotik cloud core router CCR-1009-8G-15-15+, internet connection 6megabit and around 100 to 120 users. How to limit YouTube download to all user. How to logout everyone in 4hour and need to login back manually. How to setup hotspot gateway, I meant login page I’m new to mikrotik. Please he...
by TonyJr
Wed Sep 09, 2015 3:31 am
Forum: Beginner Basics
Topic: hide ip address in hotspot
Replies: 2
Views: 514

Re: hide ip address in hotspot

For the wireless interface, un-tick default-forward. I THINK this is the option that stops client-to-client communication. Please try and feedback. Hope this helps.

Tony
by TonyJr
Wed Sep 09, 2015 3:28 am
Forum: Beginner Basics
Topic: Game server on mikrotik
Replies: 15
Views: 1694

Re: Game server on mikrotik

The reason why it does not work is that by default, users on Hotspot will have access only to the internet interface. You need to either create walled garden rules (I think that is the correct name), or create manual rules to allow specific access to your game server. This is assuming your game serv...
by TonyJr
Wed Sep 09, 2015 3:20 am
Forum: Beginner Basics
Topic: IPTV multicast routing question
Replies: 2
Views: 929

Re: IPTV multicast routing question

Between Routerboard and STB, add a switch which allows IGMP snooping and enable for all ports. Connect Routerboard and new switch together with Gigabit and it will only peak max 150mbit/sec as 3x 50mbit. the switch backplane and cpu handles the distribution so less worry. If you need to expand, use ...
by TonyJr
Wed Sep 09, 2015 3:07 am
Forum: Beginner Basics
Topic: Marking SSTP traffic
Replies: 0
Views: 495

Marking SSTP traffic

Hello, I would like to mark SSTP traffic, outgoing on interface 'isp' in ip firewall mangle. Do I just setup the rule for tcp dst port 443 on outgoing interface 'isp', then mark with 'my_mark'? The dst is a dynamic IP. Here is the situation: I have a site-to-site sstp vpn link which goes out over th...
by TonyJr
Wed Sep 09, 2015 2:39 am
Forum: General
Topic: CCR1009 - Multicast traffic capacity on bridged vlan trunk
Replies: 0
Views: 355

CCR1009 - Multicast traffic capacity on bridged vlan trunk

Hello, I wish to configure my CCR-1009 for an extra configuration - Just Add Power HDMI-over-IP transmitters and receivers. Usually with these devices, traffic is kept within a dedicated switch or switch stack, but I am going to be spanning traffic between two separate switches - one has the transmi...
by TonyJr
Fri Apr 17, 2015 6:39 pm
Forum: Wireless Networking
Topic: WISP Network Design Ready, help me finalize everything!
Replies: 3
Views: 663

Images are not displaying :/
by TonyJr
Thu Mar 05, 2015 11:58 pm
Forum: General
Topic: Force "Sign-in to WiFi network"
Replies: 20
Views: 21681

Re: Force "Sign-in to WiFi network"

Hi, I have several routers running with hotspot but I noticed that only some devices are displaying to the user the message about the "Sign-in to WiFi network" and then opening the browser so my question is: can I force all devices to show this message doing something on the router side? I guess th...
by TonyJr
Tue Feb 03, 2015 11:46 pm
Forum: General
Topic: SOLVED: L2TP IPSec VPN from WP8.1 to MikroTik NAT Router
Replies: 1
Views: 1603

Re: L2TP IPSec VPN from WP8.1 to MikroTik NAT Router

I managed to get this working from using a backup configuration to restore the settings. The problem I had with my Nokia Lumia, was related to upgrading from WP8 to WP8.1. The Operator image had different Access Point settings: WP8 image used APN that assigned public IP and the WP8.1 image used APN ...
by TonyJr
Thu Jan 29, 2015 3:03 am
Forum: General
Topic: traffic used by whatsapp
Replies: 2
Views: 637

Re: traffic used by whatsapp

According to Wikipedia:

this.[27]

Multimedia messages are sent by uploading the image, audio or video to be sent to an HTTP server and then sending a link to the content along with its Base64 encoded thumbnail (if applicable).
by TonyJr
Mon Jan 26, 2015 12:15 am
Forum: Wireless Networking
Topic: Radiating Coaxial Cable
Replies: 1
Views: 616

Radiating Coaxial Cable

Hello, Has anyone ever tried using Radiating Coaxial Cable to provide 2.4ghz coverage indoors - in corridors such as in hotels, tunnels etc? I have just found out about this kind of cable, which is mainly used along train lines and tunnels. It seems like it would be a good solution for the hotel ind...
by TonyJr
Mon Nov 17, 2014 3:19 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101958

Re: CAPsMAN v2 ready for testing

I have a recommendation for the next release - check provisioning configuration for corrupt or invalid settings and advise user when upgrading. I had to remove and add a provisioning rule which became corrupt, but it looked normal from the cli and winbox. If not for upgrade, maybe a button to check...
by TonyJr
Sun Nov 09, 2014 9:44 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101958

Re: CAPsMAN v2 ready for testing

Hello, I would like to propose the following; An option in radio and an option in provisioning profile which can over-ride the main cap upgrade rule. Two reasons for this: - Having capsman2 and cap on the same routerboard, to prevent reboot of the controller when new software is uploaded. - More gra...
by TonyJr
Sun Nov 09, 2014 12:18 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101958

Re: CAPsMAN v2 ready for testing

I am able to finally install capsman2 on a rb493g and enable cap on it and set capsman option to 127.0.0.1 . (use capsman2 on a cap itself)

One bug I can see is that registered clients show TX of -1 in winbox.



Would it be possible to see CCQ in winbox for registered clients?



Tony
by TonyJr
Sun Nov 09, 2014 12:13 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101958

Re: CAPsMAN v2 ready for testing

I have a recommendation for the next release - check provisioning configuration for corrupt or invalid settings and advise user when upgrading. I had to remove and add a provisioning rule which became corrupt, but it looked normal from the cli and winbox. If not for upgrade, maybe a button to check ...
by TonyJr
Wed Oct 15, 2014 2:36 am
Forum: General
Topic: SOLVED: L2TP IPSec VPN from WP8.1 to MikroTik NAT Router
Replies: 1
Views: 1603

SOLVED: L2TP IPSec VPN from WP8.1 to MikroTik NAT Router

Hello, I was wondering if anyone could post the /ppp, /ip IPsec and /ip firewall settings that work for a MikroTik router setup for basic cpe Nat, and a windows phone 8.1 client connecting to it via L2TP + IPsec VPN? I followed a simple guide on a website previously, but I am unable to find it as I ...
by TonyJr
Tue Sep 30, 2014 2:53 am
Forum: General
Topic: WMM over WiFi
Replies: 7
Views: 2315

Re: WMM over WiFi

The reason I say to ignore WMM is that it works good for e.g. iPhone to AP connection, but for bridge, you would have to configure the bridge to set wmm parameters for which packets it is forwarding. I don't even think you can set the wmm queue for packet/connection in routeros. Best to stick with D...
by TonyJr
Tue Sep 30, 2014 2:50 am
Forum: General
Topic: WMM over WiFi
Replies: 7
Views: 2315

Re: WMM over WiFi

As it is a bridge, ignore wmm. Use mangle rules to mark VoIP traffic with a custom mark or set the required DSCP values, and mark other traffic too. Then use queue tree to add two queues, one for VoIP and one for unmarked traffic and set the priorities to your requirements. I am tired, and cannot re...
by TonyJr
Sat Sep 06, 2014 4:51 am
Forum: Wireless Networking
Topic: Common installation mistakes to avoid
Replies: 0
Views: 597

Common installation mistakes to avoid

Hello, I would like to propose a pinned post in the wireless section that contains the most common mistakes that are made when doing an installation of wireless equipment. My aim is to help to keep high standards for wireless installations, and to educate the best practices to newcomers. My first th...
by TonyJr
Sat Sep 06, 2014 4:22 am
Forum: Wireless Networking
Topic: CAPsMAN multiple virtual ssid
Replies: 7
Views: 12195

Re: CAPsMAN multiple virtual ssid

Yes you can, as tinka said with slave configurations. The wiki has all the information requires to configure this.
by TonyJr
Sat Sep 06, 2014 4:19 am
Forum: Wireless Networking
Topic: How to read antenna patterns
Replies: 0
Views: 450

How to read antenna patterns

Hello, Could anybody write a wiki article to show how to read Antenna Pattern diagrams please? I can read them for one axis, bit struggle for reading diagrams for horizontal and vertical polarization - when they are side by side my mind grinds to a halt. An example would be looking at the diagram fo...
by TonyJr
Sat Sep 06, 2014 4:10 am
Forum: Wireless Networking
Topic: 300 meter linktest with trees as obstruction
Replies: 19
Views: 2700

Re: 300 meter linktest with trees as obstruction

Great article. Would you be able to translate your other articles to English, too please? I also agree with the other posts - it would be good if you could provide the wireless config or full config exports of each device used in the articles too.



Tony
by TonyJr
Wed Jul 09, 2014 4:10 am
Forum: General
Topic: Intruder on my Network
Replies: 10
Views: 1372

Re: Intruder on my Network

physical security? lock down unused hot ports?

Sent from my Surface 2 using Tapatalk
by TonyJr
Wed Jul 09, 2014 4:09 am
Forum: General
Topic: New here
Replies: 7
Views: 1091

Re: New here

That will be fine. MikroTik are working a lot on the switch chip functions, from what I have read and also a lot for the new processor, so make sure you keep the software up to date. good luck!


Sent from my Surface 2 using Tapatalk
by TonyJr
Wed Jul 09, 2014 3:52 am
Forum: General
Topic: When will we have 802.11ac Support?
Replies: 33
Views: 10044

Re: When will we have 802.11ac Support?

if you have access to development version, check the portal

Sent from my Surface 2 using Tapatalk
by TonyJr
Sat Jun 07, 2014 1:57 am
Forum: General
Topic: IPv6 support for L2TP/PPTP/SSTP etc.
Replies: 12
Views: 6416

Re: IPv6 support for L2TP/PPTP/SSTP etc.

Oh I see having ipv6 addressed endpoints. Ignore my previous post as the endpoints are ipv4, but ipv6 still flows through the tunnel. Tony.
by TonyJr
Sat Jun 07, 2014 1:54 am
Forum: General
Topic: IPv6 support for L2TP/PPTP/SSTP etc.
Replies: 12
Views: 6416

Re: IPv6 support for L2TP/PPTP/SSTP etc.

I have ipv6 working over pptp, and have had it working for over a year. Also with ospfv3. I use it for a site to site VPN. Would you like an overview of the configuration? Is it ipsec that does not support ipv6? I have not used ipsec yet, but I am planning to. I will follow this thread. Tony.
by TonyJr
Tue Jun 03, 2014 1:45 am
Forum: General
Topic: Firewall rule not activating once PPTP connects
Replies: 8
Views: 1181

Re: Firewall rule not activating once PPTP connects

It is fixed :).
by TonyJr
Tue Jun 03, 2014 1:42 am
Forum: General
Topic: Facebook Wifi
Replies: 38
Views: 16360

Re: Facebook Wifi

Any news on this, MikroTik, now that it is open to other vendors? It looks like it would be good for businesses.
by TonyJr
Sun May 04, 2014 3:18 am
Forum: Wireless Networking
Topic: Massive MIMO for Next Generation Wireless Systems
Replies: 3
Views: 1113

Re: Massive MIMO for Next Generation Wireless Systems

Thank you I will have a read

Sent from my RM-875_eu_euro1_260 using Tapatalk
by TonyJr
Sun May 04, 2014 1:56 am
Forum: Wireless Networking
Topic: Receive from one SSID and broadcast another?
Replies: 2
Views: 689

Re: Receive from one SSID and broadcast another?

You cannot use the same wireless interface to connect to an AP and also use it as an AP at the same time. You can add another wireless card to the MikroTik device and use that as your own AP, while using the other one to connect to the Internet if your hardware has a spare slot. There other option i...
by TonyJr
Sun May 04, 2014 1:42 am
Forum: Wireless Networking
Topic: Massive MIMO for Next Generation Wireless Systems
Replies: 3
Views: 1113

Re: Massive MIMO for Next Generation Wireless Systems

Any link to more information available?

Sent from my RM-875_eu_euro1_260 using Tapatalk
by TonyJr
Sat Apr 05, 2014 4:54 am
Forum: General
Topic: Winbox + Windows RT
Replies: 12
Views: 4015

Re: Winbox + Windows RT

I would also like to request a WinBox version for Windows RT.
by TonyJr
Tue Mar 25, 2014 12:17 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 79928

Re: v6.11 released

Why 99% of users just simple complain without simpliest help to developers? 1) make all config backup 2) update 3) if have some problems - make supout.rif - reset router - restore config - if (fail restore/or same problem) -> make second supout.rif 4) revert for working 5.xx 6.xx and restore config...
by TonyJr
Sun Mar 23, 2014 5:52 pm
Forum: General
Topic: RB2011UAS-RM PXE setup not working
Replies: 2
Views: 1616

Re: RB2011UAS-RM PXE setup not working

You need to specify boot server in dhcp options.
Option 66 is TFTP server address
Option 67 is bootfile
Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Mon Mar 10, 2014 10:25 pm
Forum: General
Topic: company page Open as home page
Replies: 4
Views: 1052

Re: company page Open as home page

Edit hotspot login.html to redirect to your company webpage.
by TonyJr
Mon Mar 10, 2014 10:23 pm
Forum: Wireless Networking
Topic: omnitik maximum distance
Replies: 4
Views: 1654

Re: omnitik maximum distance

by TonyJr
Sun Mar 09, 2014 12:30 am
Forum: Beginner Basics
Topic: QoS & LAN Party
Replies: 10
Views: 1792

Re: QoS & LAN Party

It may be a good idea to contact www.multiplay.com . I have been to one of their meetings and their knowledge is exceptional on this subject, as this is their speciality. Also great knowledge for calculating power requirements.

Hope this helps.

Tony
by TonyJr
Mon Mar 03, 2014 2:53 am
Forum: Beginner Basics
Topic: IP Route with VLAN and Bridge
Replies: 2
Views: 6265

Re: IP Route with VLAN and Bridge

Hi All, I'm new with Mikrotik and It has been serving in many awesome ways. In my house setup I've managed to extend my network to my Hall and Room for media streaming and IPTV. I've attached the diagram below. The problem I'm facing are: 1.192.168.88.1 router unable to ping to 192.168.88.2 router ...
by TonyJr
Mon Mar 03, 2014 2:49 am
Forum: General
Topic: Four 10Gb NICs KVM and RouterOS
Replies: 3
Views: 1777

Re: Four 10Gb NICs KVM and RouterOS

Hi guys! I need an advice, and will appretitate any. Here is some background: For a project there was purchased SuperMicro server with 6 Network interfaces, 24 CPUs, 128GB RAM. The network interfaces are 2x1Gb and 4x10GB the two 1GB will be only for service and internal connections, the others will...
by TonyJr
Mon Mar 03, 2014 2:46 am
Forum: Beginner Basics
Topic: Problems Port Forwarding
Replies: 1
Views: 556

Re: Problems Port Forwarding

I have tried several different tutorials but I am having a hard time getting port 80 and 5445 forwarded to my camera dvr. I have a dynamic WAN ip and the dvr has a dhcp reservation of 192.168.0.142 however nothing I do seems to actually open the ports. Maybe this will help: I have an ip camera with...
by TonyJr
Mon Mar 03, 2014 2:32 am
Forum: Beginner Basics
Topic: user manger
Replies: 1
Views: 499

Re: user manger

im using usermanger

mikrotik 5.18

i wont users work in two device in the same time ?

how can i do that ? please help me :?
http://wiki.mikrotik.com/wiki/User_Mana ... ss_Example
by TonyJr
Mon Mar 03, 2014 2:30 am
Forum: Beginner Basics
Topic: Help with firewall rules
Replies: 1
Views: 673

Re: Help with firewall rules

Hello, I need some help for create the firewall rules. I have a RB2011UiAS-RM configured: - ether1 WAN - from ether2 to ether5 LAN1 Office (192.168.2.1) - from ether6 to ether10 LAN2 Hotspot (192.168.3.1) all it's working fine and guests authenticate trought Captive Portal correctly. I have two que...
by TonyJr
Mon Mar 03, 2014 2:27 am
Forum: The User Manager
Topic: Help me on my school
Replies: 2
Views: 935

Re: Help me on my school

I have Rb-450 on my school, i need to put my students browse 5 websits only Configraion is ready but open any websites ,how to make rule for my students to open 5 websits . Thanks :( Use HTTP Proxy http://wiki.mikrotik.com/wiki/Manual:IP/Proxy /ip proxy access add dst-host=* action=deny /ip proxy a...
by TonyJr
Mon Mar 03, 2014 1:50 am
Forum: Beginner Basics
Topic: Configuring VLAN Encapsulation
Replies: 3
Views: 824

Re: Configuring VLAN Encapsulation

No problem :)
by TonyJr
Mon Mar 03, 2014 1:48 am
Forum: Beginner Basics
Topic: Very slow LAN
Replies: 5
Views: 2264

Re: Very slow LAN

I guys, i'm completely new to this. So I apologies advance. The thing is, I only used my Time Capsule 4th gen in the past. But i've I setup a MikroTik RB951G-2HnD as router. I just used the Quick Set configuration. And I haven't changed anything. I've connected the Time Capsule to the RB951G-2HnD a...
by TonyJr
Mon Mar 03, 2014 1:43 am
Forum: General
Topic: uTorrent - can't connect Remote
Replies: 1
Views: 619

Re: uTorrent - can't connect Remote

Maybe this will help: I have an ip camera with a port forwarded. These are the rules needed to make it work: firewall rule 32 ;;; P1304 CCTV chain=forward action=accept protocol=tcp dst-address=192.168.32.5 in-interface=ether9 dst-port=80 firewall rule: dst-port is the internal port. in interface is...
by TonyJr
Mon Mar 03, 2014 1:39 am
Forum: Beginner Basics
Topic: disable dynamic routing - VLAN Subnet isolation
Replies: 2
Views: 2298

Re: disable dynamic routing - VLAN Subnet isolation

We want to use an RB1100AHx2 as router between an DSL router and a Cisco switch with 5 VLANs. The VLANs should be striclty seperated. But all need access to the Internet. One VLAN contains printers which should be accessable from two other VLANs. The Cisco switch is only doing level 2 stuff and we ...
by TonyJr
Mon Mar 03, 2014 1:35 am
Forum: Beginner Basics
Topic: Configuring VLAN Encapsulation
Replies: 3
Views: 824

Re: Configuring VLAN Encapsulation

Hey guys, Pretty new to Mikrotik's. I have an RB951G-2HnD and have set a few of them up no problems to connect to fibre networks. We have a new customer that's on a different ISP and we can't get it to connect. The ISP have advised that we need to change the setting on any 3rd party router to: vlan...
by TonyJr
Mon Mar 03, 2014 1:29 am
Forum: General
Topic: Fast Path on a Bridge with wlan?
Replies: 1
Views: 754

Re: Fast Path on a Bridge with wlan?

Hello, I am running two Omnitiks as bridging APs. On each one of them, there is a bridge interface, bridging the wlan with one of the ethernets. Fast path appears disabled on both these bridge interfaces (/interface print detail), even though they use no ip firewall, no rules or any queues other th...
by TonyJr
Mon Mar 03, 2014 1:26 am
Forum: RouterBOARD hardware
Topic: RB750UP hardware switch problem
Replies: 2
Views: 849

Re: RB750UP hardware switch problem

Network configuration x86 -- LAN switch--- SxLite <<<400m nv2>>>> Sxlite--eth2 750UP eth3 RH433AH(eth1) R52nM <<1km>>> x86 RB750UP eht2 master port 3,4,5 slaves Running bandwidth test UDP from one to another x86 when reach more that 90Mbps eth3 on RB750 where is 433 connected go down test of course...
by TonyJr
Mon Mar 03, 2014 1:19 am
Forum: Beginner Basics
Topic: Understand firewall filter rules
Replies: 3
Views: 2805

Re: Understand firewall filter rules

Hi Tony, thanks for your answer, so I changed my filter rule. By the NAT rule I posted accidentally two versions, so the #1 was only for testing, I have a dialup connection with changing IP every 24 hours, is the a possibility to get the current dialup IP in the rule? Regards Markus I don't think t...
by TonyJr
Sun Mar 02, 2014 7:51 pm
Forum: General
Topic: Correct setup for second public IP address
Replies: 1
Views: 884

Re: Correct setup for second public IP address

Maybe this will help: I have an ip camera with a port forwarded. These are the rules needed to make it work: firewall rule 32 ;;; P1304 CCTV chain=forward action=accept protocol=tcp dst-address=192.168.32.5 in-interface=ether9 dst-port=80 firewall rule: dst-port is the internal port. in interface is...
by TonyJr
Sun Mar 02, 2014 7:25 pm
Forum: Beginner Basics
Topic: when i'm trying to login by my mobile,,,, the mikrotik disco
Replies: 1
Views: 478

Re: when i'm trying to login by my mobile,,,, the mikrotik d

I'm login in by my laptop, when i'm trying to login by my mobile,,,, the mikrotik disconnect my laptop!!! this is the log ps: I'm connected to RouterBoard by Access Point errr.png According to the log, you have set somewhere in hotspot or hotspot user to limit access to 1 mac address. When trying t...
by TonyJr
Sun Mar 02, 2014 7:18 pm
Forum: General
Topic: Who runs the internet
Replies: 1
Views: 499

Re: Who runs the internet

Good post.
by TonyJr
Sun Mar 02, 2014 7:14 pm
Forum: Beginner Basics
Topic: Understand firewall filter rules
Replies: 3
Views: 2805

Re: Understand firewall filter rules

IP Firewall Filter #9 should read:

9 X ;;; filter rule for OpenVPN connection to Diskstation
chain=forward action=accept protocol=udp dst-address=10.0.0.113 in-interface=pppoe-ether1 dst-port=1194

And rule #2 in NAT should be removed. Rule #1 is fine.

Hope this works,

Tony
by TonyJr
Sun Mar 02, 2014 7:04 pm
Forum: General
Topic: SNMP receive trap
Replies: 1
Views: 478

Re: SNMP receive trap

Hello,

This is not currently possible with RouterOS. It would be a nice little feature to have, though.

Tony
by TonyJr
Thu Feb 27, 2014 3:05 am
Forum: Wireless Networking
Topic: Suggest Me how much tower height need
Replies: 3
Views: 1748

Re: Suggest Me how much tower height need

Image

One Gazillion Meters
by TonyJr
Thu Feb 27, 2014 3:02 am
Forum: Wireless Networking
Topic: registered to other device in network
Replies: 4
Views: 2513

Re: registered to other device in network

The client sends a message to the AP stating that it is finished and is connecting to a new device. I get this message, when a client roams from one AP to another, under the same SSID but different channel. It is perfectly normal.
by TonyJr
Thu Feb 27, 2014 12:31 am
Forum: Beginner Basics
Topic: Mikrotik + AdBlock Plus
Replies: 20
Views: 24689

Re: Mikrotik + AdBlock Plus

There's a fancy dream of all web users to make it safer and faster. One of a relly good tools for that is AdBlockPlus Service. This service supplys regex filter rules of a harmfull content, as such https://easylist-downloads.adblockplus.org/malwaredomains_full.txt Is it possible to apply AdBlockPlu...
by TonyJr
Mon Feb 24, 2014 2:39 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 59135

Re: MUM Europe 2014 - Italy, Venice, February 20-21

I am wondering:

Can wireless interface(s) on the caps manager RB also be added to the caps manager system on that same RB?

Tony
by TonyJr
Mon Feb 24, 2014 2:19 am
Forum: General
Topic: Poor mans config sync: vrrp
Replies: 7
Views: 3448

Re: Poor mans config sync: vrrp

Hello! I would like to ask the advice and tips of all you gurus out there. We have two ccr routers in VRRP setup. The config is fairly static except for firewall rules which we work on quite a bit. My thoughts, and I am asking you guys if I am mad / wasting my time to try this, is to built a script...
by TonyJr
Sat Feb 22, 2014 1:35 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 59135

Re: MUM Europe 2014 - Italy, Venice, February 20-21


Thanks :)

ccr 1072...smartcard...what will it be used for? console (physical router access) authentication ?

Storing certificates.
by TonyJr
Fri Feb 21, 2014 2:41 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 59135

Re: MUM Europe 2014 - Italy, Venice, February 20-21

I wonder if the mAP has a built in connector for an antenna, similar to the little white MikroTik SOHO routers. I like the fact that it can take af and at based PoE and PoE+ and also offer Passive PoE output. This is my assumption, by looking at the slides. I hope it does it when released. inside of...
by TonyJr
Thu Feb 20, 2014 10:20 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 59135

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Hey

Where is the PDF with those nice slides and the imaginary release dates ? :)
+1 :)
by TonyJr
Sun Feb 16, 2014 4:49 am
Forum: General
Topic: v6.10 released
Replies: 248
Views: 82333

Re: v6.10 released

Now my sstp connections with 6.7 clients don't work, Nice. Reverted to 6.7... Mikrotik, you should really hire some test engineers. Maybe start reading about Lint, QAC, Rational Test Realtime, automated functional regression testing... Email support, please. They know what they are doing. Very hard...
by TonyJr
Sun Feb 09, 2014 10:31 pm
Forum: General
Topic: Automatic resize on double click column header seperator
Replies: 1
Views: 1411

Automatic resize on double click column header seperator

Hello, It would be nice to be able to double-click between column-headers in lists, within Winbox, to auto-size the column width just like in Excel. The annotated screenshot below shows this. http://0.tqn.com/d/spreadsheets/1/5/s/1/-/-/col_width2.gif I think this will come in handy for when IPv6 add...
by TonyJr
Sun Feb 09, 2014 10:20 pm
Forum: Forwarding Protocols
Topic: IPv6 mangle action: SET PRIORITY
Replies: 4
Views: 2257

Re: IPv6 mangle action: SET PRIORITY

Hmm I also see this difference in mangle rules between v4 and v6. It may cause problems with QoS on IPv6 packets when they are forwarded on in the network, if the other devices do not use DSCP, but only CoS.

Maybe it is on the 'drawing board', but not implemented entirely yet.

Tony
by TonyJr
Sun Feb 09, 2014 7:02 pm
Forum: General
Topic: Allow choice of binding interface for NTP and DNS servers
Replies: 2
Views: 2145

Allow choice of binding interface for NTP and DNS servers

Hello, I would like to propose allowing to choose the interface that the NTP and DNS servers built into RouterOS bind to, rather than having to set a separate firewall rule to specify access rules for them. Example: Letter from ISP: 'you have open DNS resolver, you may be susceptible to DDoS'. Me: :...
by TonyJr
Sun Feb 09, 2014 4:16 am
Forum: General
Topic: Vodafone Sure Signal Booster
Replies: 7
Views: 2006

Re: Vodafone Sure Signal Booster

It depends on your firewall rules - use the wiki for IPSEC tunnels to find what type of traffic is used, and create rules that allow that kind of traffic to be forwarded to the local network or device. It should work under normal firewall rules, but who is to say what is normal, eh? Have a fiddle ar...
by TonyJr
Thu Feb 06, 2014 1:14 pm
Forum: General
Topic: What fiber optic and Mikrotik SFP
Replies: 4
Views: 1398

Re: What fiber optic and Mikrotik SFP

According to the specification supplied, that cable will work with the S-35/53LC20D pair of transceivers over one fiber. The spec says the cable is designed for the following wavelengths: 1310nm, 1383nm and 1550nm and is single-mode. S-35LC20D has T1310nm R1550nm for one end and the S-53LC20D has T1...
by TonyJr
Fri Jan 31, 2014 4:39 pm
Forum: General
Topic: 6.9 released!
Replies: 223
Views: 79581

Re: 6.9 released!

Working fine on RB493G, RB751U-2HnD and OmniTIK UPA-5HnD with latest included boot firmware.
by TonyJr
Wed Jan 29, 2014 8:02 pm
Forum: General
Topic: Wireless Controller?
Replies: 7
Views: 2540

Re: Wireless Controller?

Would be nice to have seamless AP roaming, auto power adjustment, rogue detection/isolation and GUI map.
by TonyJr
Mon Dec 23, 2013 2:11 am
Forum: General
Topic: IPv6 setup problem
Replies: 5
Views: 977

Re: IPv6 setup problem

Hi, since my ISP now provides IPv6 to my home, I am trying to setup IPv6 in my home network. So far I got everything working on the RB2011 but my Windows 7 clients seem not to get any response from the outside world. I can e.g. ping the RB fe80::* address though. I can see outgoing and incoming tra...
by TonyJr
Thu Dec 05, 2013 2:25 am
Forum: Forwarding Protocols
Topic: IPv6 work only after disable/enable address
Replies: 7
Views: 4478

Re: IPv6 work only after disable/enable address

I have a problem with IPv6 address on LAN interface when disable/enable or reconect wan (PPPoE client interface). I can ping IPv6 destination from router but not from PC. And problem persist on 6.7, you can see on video. http://youtu.be/6Mo1HN4y6ug Looks like the old problem I used to have. Router ...
by TonyJr
Thu Dec 05, 2013 2:03 am
Forum: Scripting
Topic: Siren alarm script
Replies: 18
Views: 12438

Re: Siren alarm script

more great sounds? :beep frequency=660 length=100ms; :delay 150ms; :beep frequency=660 length=100ms; :delay 300ms; :beep frequency=660 length=100ms; :delay 300ms; :beep frequency=510 length=100ms; :delay 100ms; :beep frequency=660 length=100ms; :delay 300ms; :beep frequency=770 length=100ms; :delay...
by TonyJr
Thu Dec 05, 2013 1:59 am
Forum: General
Topic: Static DNS entries
Replies: 3
Views: 757

Re: Static DNS entries

After a cut of energy i lost the static DNS entries. Is a bug? Does someone know because?

The hardware is RB1200 (ppc v5.20).

Could be memory corruption from cut of energy.
by TonyJr
Thu Dec 05, 2013 12:53 am
Forum: Forwarding Protocols
Topic: IPv6 work only after disable/enable address
Replies: 7
Views: 4478

Re: IPv6 work only after disable/enable address

I have a problem on all routers in my network. Sometime IPv6 address stop to work and after disable/enable IPv6 address everything work ok. I have this problem on all routers and on all versions ROS, does someone have solution for the problem? scenario: 1. add ip address to interface 2. ping gatewa...
by TonyJr
Thu Dec 05, 2013 12:46 am
Forum: General
Topic: Multicast routing
Replies: 6
Views: 1401

Re: Multicast routing

Hello, we bought MIKROTIK Cloud Core Router 1016-12G and try to use it for the multicast routing. Here are sources from the service provider: rp xx.xx.xx.xx permit 224.2.2.0 0.0.0.255 permit 239.255.12.0 0.0.1.255 rp yy.yy.yy.yy permit 233.136.41.0 0.0.0.255 rp zz.zz.zz.zz permit 233.83.164.1 permi...
by TonyJr
Thu Dec 05, 2013 12:37 am
Forum: General
Topic: How did you first find out about Mikrotik?
Replies: 3
Views: 605

Re: How did you first find out about Mikrotik?

100% Mikrotik (exept in hotspot setups, where mikrotik still anint good enough) How do u think Mikrotik is not good in hotspots. We are planning a big setup of almost 15 base station using mikrotik hotspots. Maybe this will be of good use for you, when it is released: http://wiki.mikrotik.com/wiki/...
by TonyJr
Thu Dec 05, 2013 12:35 am
Forum: General
Topic: v6.7 released
Replies: 225
Views: 109417

Re: v6.7 released

Upgraded RB493G, RB751U-2HnD and OmniTik UPA-5HnD. No problems to report.
by TonyJr
Wed Dec 04, 2013 2:59 am
Forum: General
Topic: How did you first find out about Mikrotik?
Replies: 3
Views: 605

How did you first find out about Mikrotik?

I was wondering how everyone first heard about Mikrotik. I was in Kandahar in 2011 and the welfare internet service was provided using the RouterOS hotspot and proxy services via access points in accommodation and a satellite link back to the UK. Paradigm was the provider. Painfully slow due to the ...
by TonyJr
Fri Nov 22, 2013 6:07 pm
Forum: General
Topic: Changelog RouterOS 6.7
Replies: 27
Views: 16411

Re: Changelog RouterOS 6.7

What's new in 6.7rc2 (2013-Nov-22 15:45): *) leds - inverted modem signal trigger, now it will trigger when the signal level rises above the treshold; *) ipsec - added sha256 and sha512 support; *) ipsec - proposal defaults changed to aes-128 and sha1 for both phase1 and phase2; *) certificate - sup...
by TonyJr
Thu Nov 14, 2013 12:21 am
Forum: General
Topic: Request: Add IPv6 firewall rules and access to demo routers
Replies: 0
Views: 318

Request: Add IPv6 firewall rules and access to demo routers

Hello,

Could you add IPv6 firewall rules and access via IPv6 to the 2x demo routerboards demo.mt.lv and demo2.mt.lv?

The existing IPv4 firewall rules come in handy for a starting point for reference when building a firewall, and I think this would be handy for IPv6 rules too.

Regards,

Tony
by TonyJr
Thu Oct 24, 2013 11:28 pm
Forum: General
Topic: 6.5 released!
Replies: 185
Views: 69440

Re: 6.5 released!

I maintain several RB750UP devices and I see some differences between the various units when opening the web interface. On some of them I see only a message saying that I'm connected to a router and below that several buttons for winbox, webfig, graphs etc. And some of them show a login possibiliti...
by TonyJr
Thu Oct 10, 2013 4:53 am
Forum: General
Topic: Login to Microtik automatic
Replies: 2
Views: 805

Re: Login to Microtik automatic

Ask building owner to add static entry for your mac address, and use mac address authentication in hotspot module. That is what I can think of off the top of my head.

Maybe there is an easier way - I am tired and need sleep!

Tony
by TonyJr
Wed Oct 09, 2013 1:57 am
Forum: General
Topic: changelog ROS 6.5
Replies: 32
Views: 14206

Re: changelog ROS 6.5

Hmm maybe we will find out on Friday...

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Sat Oct 05, 2013 5:44 pm
Forum: General
Topic: Ports Flapping Unusable Router :(
Replies: 11
Views: 2150

Re: Ports Flapping Unusable Router :(

Hmmm.

How about earthing the device?

I can't think of anything else other than a problem with the hardware itself.

Tony

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Fri Oct 04, 2013 4:41 am
Forum: General
Topic: Central hotspot
Replies: 5
Views: 1616

Re: Central hotspot

Hi, Setup each hotspot as if individual hotspot devices. Make one the 'master' and install userman Configure as per wiki article for userman with remote hosts. Then configure remote hosts to use 'master' for radius. So all have own routes to internet, but authenticate users from central userman/ 'se...
by TonyJr
Fri Oct 04, 2013 4:35 am
Forum: General
Topic: Simpel Queues
Replies: 16
Views: 2537

Re: Simpel Queues

/tool profile ?

Or

Firmware upgrade available I forget where the option is. I have seen this sometimes help. (Routerboot)

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Fri Oct 04, 2013 4:33 am
Forum: General
Topic: Ports Flapping Unusable Router :(
Replies: 5
Views: 1856

Re: Ports Flapping Unusable Router :(

Once I replaced the cable that provides poe to one of my rb with a shielded one, port flapping went away. The poe switch is grounded so that may be why. That was the first indicator of a solution to me. Maybe it is grounding issues/interference that is causing these port flaps? Let me know how you g...
by TonyJr
Thu Oct 03, 2013 12:09 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 85653

Re: New Ethernet port flap issue enquiery, PLS JOIN!

I have found that switching from normal UTP patch cables to shielded FTP CAT6 patch cables everywhere completely eliminates the port flapping issue. Note at least one of the devices need to be earthed for this to work properly.

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Wed Oct 02, 2013 3:44 am
Forum: General
Topic: Ports Flapping Unusable Router :(
Replies: 11
Views: 2150

Re: Ports Flapping Unusable Router :(

I usually stop port flapping by replacing unshielded cable on the malfunctioning port with shielded patch cable assy.

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Wed Jul 17, 2013 12:54 am
Forum: Forwarding Protocols
Topic: PIM, 2 routers linked by PPTP. Strange happenings. Anyone ex
Replies: 0
Views: 819

PIM, 2 routers linked by PPTP. Strange happenings. Anyone ex

Hello, I have 2 routers for 2 seperate LAN networks. They are interconnected over the internet by PPTP link. I have finally got PIM to work between the two networks. The solution was to set the RP on each router to e.g. Router B. Previous configuration had RP on both routers set for Router A. I am u...
by TonyJr
Sat Jun 29, 2013 7:28 pm
Forum: General
Topic: Any tips to consolidate mangle rules?
Replies: 0
Views: 672

Any tips to consolidate mangle rules?

Hello, With the release of v6, is there any way I can consolidate my mangle rules, or is there a better way to do the dscp marking? Thanks in advance for your help, Tony [admin@Home] /ip firewall mangle> expo # jun/29/2013 17:25:36 by RouterOS 6.1 # software id = 7GCC-UF6C # /ip firewall mangle add ...
by TonyJr
Sun Jun 16, 2013 12:34 pm
Forum: General
Topic: VLAN for dividing WLAN prv/guest
Replies: 5
Views: 5988

VLAN for dividing WLAN prv/guest

Glad you got it sorted. It might of helped if I read your original post more carefully about the only having a single wireless AP!

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Sat Jun 15, 2013 11:41 am
Forum: Beginner Basics
Topic: Ports and Web blocking in RB2011
Replies: 1
Views: 791

Ports and Web blocking in RB2011

try this - it may work I am not 100% sure: Replace last rule with the following 3 rules: Accept 'forward' from 'subnet' to 'address-list' using 'ports' protocol 'tcp'. Accept 'forward' from 'address-list' to 'subnet' using 'ports' protocol 'tcp' Drop 'forward' any other packets at end of firewall ru...
by TonyJr
Sat Jun 15, 2013 11:06 am
Forum: General
Topic: VLAN for dividing WLAN prv/guest
Replies: 5
Views: 5988

VLAN for dividing WLAN prv/guest

Hotspot for public wifi vlan and seperate vlan for private wifi, which is connected to existing lan bridge at MT1 Example: Vlan 8 public wifi. MT1: Create bridge. Add no ports to it yet. Maybe called br-publicwifi. Assign IP. On interface connected to MT2 - add Vlan 8 and add to br-publicwifi Create...
by TonyJr
Sat Jun 15, 2013 10:49 am
Forum: The Dude
Topic: DUDE Package For CCR
Replies: 2
Views: 1440

DUDE Package For CCR

The Dude development has been halted for a few years now, I think I read other products have higher priority still, so no, not at the moment.

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Sat Jun 15, 2013 12:40 am
Forum: Beginner Basics
Topic: RB2011 + RB951 for Home WIFI With Public/Private VLAN
Replies: 6
Views: 2242

RB2011 + RB951 for Home WIFI With Public/Private VLAN

Sorry, yes - vlan 8 = public wifi only. Everything else is untagged/no vlan.

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Sat Jun 15, 2013 12:39 am
Forum: Beginner Basics
Topic: RB2011 + RB951 for Home WIFI With Public/Private VLAN
Replies: 6
Views: 2242

RB2011 + RB951 for Home WIFI With Public/Private VLAN

You can do that at a later time if you want - I first started with just the public wifi on it's own vlan, then moved the private wifi and private lan to their own vlans. But I found it a bit more fidlly, because I had to modify all the firewall rules/NAT that I'd previously setup to use the bridge f...
by TonyJr
Sat Jun 15, 2013 12:08 am
Forum: Beginner Basics
Topic: RB2011 + RB951 for Home WIFI With Public/Private VLAN
Replies: 6
Views: 2242

RB2011 + RB951 for Home WIFI With Public/Private VLAN

Also wireless channels should be different, possibly opposite ends of available channel list. E.g. 1 and 11 on 2.4Ghz

Sent from my BlackBerry 9900 using Tapatalk
by TonyJr
Sat Jun 15, 2013 12:06 am
Forum: Beginner Basics
Topic: RB2011 + RB951 for Home WIFI With Public/Private VLAN
Replies: 6
Views: 2242

RB2011 + RB951 for Home WIFI With Public/Private VLAN

Example: Vlan 8 public wifi. Main rb: Create bridge. Add no ports to it yet. Maybe called br-publicwifi. Assign IP. On interface connected to other ap - add Vlan 8 and add to br-publicwifi Create open VirtualAP called e.g. Publicwifi and add to br-publicwifi Run hotspot setup, but use br-publicwifi ...
by TonyJr
Mon Jun 10, 2013 3:22 pm
Forum: General
Topic: New Ethernet port flap issue enquiery, PLS JOIN!
Replies: 247
Views: 85653

Re: New Ethernet port flap issue enquiery, PLS JOIN!

Had ether1 on my RB493G start doing this on Friday. Power is supplied by a POE switch via ubiquiti instant 802.3af outdoor adapter to ether1. I installed a second wifi card to the 493G Thursday evening, so this could be the cause of the problem. Anyway to cut a long story short, I managed to solve t...
by TonyJr
Sat Feb 16, 2013 4:36 am
Forum: General
Topic: HP Printer - won't send pckts to other subnet. nat rule?
Replies: 1
Views: 582

HP Printer - won't send pckts to other subnet. nat rule?

Hello, I have a home version HP printer. I use 2 subnets. One for wireless and one for wired, both with different IP ranges. The printer won't send packets to a different subnet to the one it is on. It receives them OK though. This is through design in the firmware. Is there any way I can use a NAT ...
by TonyJr
Sat Feb 16, 2013 3:50 am
Forum: General
Topic: HotSpot login redir to specific URL/access to one srv + port
Replies: 0
Views: 829

HotSpot login redir to specific URL/access to one srv + port

Hello, I'd like to setup another hotspot instance, which will redirect users to a specific URL when authenticated. This URL would be for a local web server - the only ip address and port that the clients are allowed access to. Can anyone give me a quick heads up on what i need to alter on the new ho...
by TonyJr
Wed Jan 30, 2013 10:16 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 230
Views: 136670

Re: Sample Installations - Sticky Please

Lego has it's uses... As does old coving.
by TonyJr
Sat Jan 19, 2013 4:21 am
Forum: General
Topic: v6 rc7 released
Replies: 88
Views: 24063

Re: V6 RC 7.0 released

it is weekend wait for the official forum post on monday, otherwise this thread will be ignored. they have done a good job this time :) please. patience!
by TonyJr
Sat Jan 19, 2013 4:13 am
Forum: General
Topic: SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs
Replies: 6
Views: 1704

Re: rc6 - Anyone having DHCP Relay and hotspot DHCP problems

Since the public release of v6RC7, these problems no longer exist. I shall therefore mark this as solved.
by TonyJr
Thu Jan 17, 2013 2:22 am
Forum: General
Topic: SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs
Replies: 6
Views: 1704

Re: rc6 - Anyone having DHCP Relay and hotspot DHCP problems

I sent a support request about the DHCP Relay problem to mikrotik the other day, and got a response today. 'Hello, thank you for report. We can confirm that your observations are correct, dhcp- relay feature is broken, we will fix this problem as soon as possible.' I have not had time yet to do the ...
by TonyJr
Thu Jan 17, 2013 2:18 am
Forum: General
Topic: SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs
Replies: 6
Views: 1704

Re: rc6 - Anyone having DHCP Relay and hotspot DHCP problems

ok, and you have not a problem with freeze in any time with RB1100AHx2
I do not have any RB1100AHx2 but I have 493G and 751U-2HnD. No freezing at all on them.
by TonyJr
Fri Jan 11, 2013 9:17 am
Forum: General
Topic: SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs
Replies: 6
Views: 1704

Re: rc6 - Anyone having DHCP Relay and hotspot DHCP problems

hello i have the same problem ROS 6.06 forget it downgrade to 5.22
I'm just using the built in DHCP Server and disabled the Hotspot AP temporarily until it works again in the future.
by TonyJr
Thu Jan 03, 2013 5:46 pm
Forum: General
Topic: SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs
Replies: 6
Views: 1704

SOLVED rc6 - Anyone having DHCP Relay and hotspot DHCP probs

Just wondering if anyone is having problems with: DHCP Relay issuing responses to clients? In stats, they show Requests received, but no responses issued. Hotspot DHCP not responding to clients? I have removed and re-added the DHCP Relays to all interfaces, with no luck. I have also completely remov...
by TonyJr
Mon Mar 12, 2012 11:49 pm
Forum: Beginner Basics
Topic: Virgin Media(uk) and rb751u-2hnd
Replies: 3
Views: 1805

Re: Virgin Media(uk) and rb751u-2hnd

Good News, I got it working, thank you for all the help. i had not rebooted the virgin media modem, even though the modem was supplying an ip address from the isp and all the correct subnet, DNS details etc. I'm guessing the modem does something internally with the mac address of the connected rout...
by TonyJr
Mon Feb 27, 2012 7:41 pm
Forum: Wireless Networking
Topic: Setting DTIM for Multicast
Replies: 5
Views: 1838

Setting DTIM for Multicast

Hello,

Does anyone know where I would find the setting for DTIM for wireless? Maybe it is called something else in Mikrotik? I am trying to change it to optimise for Multicast from the AP.

Many thanks,

Tony
by TonyJr
Wed Feb 22, 2012 7:09 pm
Forum: Forwarding Protocols
Topic: Multicast routing between subnets, single router.
Replies: 3
Views: 1759

Re: Multicast routing between subnets, single router.

what RP, u configured on Router ??
RP is configured to the IP of the multicast source (e.g. 192.168.1.10) with 224.0.0.0/4 as alternate-subnets. All other settings left as default.
by TonyJr
Wed Feb 22, 2012 7:11 am
Forum: Forwarding Protocols
Topic: Multicast routing between subnets, single router.
Replies: 3
Views: 1759

Multicast routing between subnets, single router.

Hello, How would I go about configuring multicast routing between different interfaces on a single router? I have tried PIM without success as it seems to require at least two routers to function. Current setup: Multicast source --> eth2 --> eth3 --> multicast client (192.168.1.10 --> 192.168.1.1 --...
by TonyJr
Mon Jan 30, 2012 4:52 pm
Forum: General
Topic: secure remote administration best practices
Replies: 4
Views: 936

Re: secure remote administration best practices

i use pptp with a dynamic ip. i wrote a script to make a tune when the pptp fails and also when it connects. its only been 3 days and it hasn't dropped ( I'm visiting parents and fitted RB there as pptp client - rb493g at home and it only beeped/dropped when i purposely disabled connection to get it...
by TonyJr
Mon Jan 30, 2012 4:46 pm
Forum: General
Topic: secure remote administration best practices
Replies: 4
Views: 936

Re: secure remote administration best practices

I've done a basic pptp tunnel to my mum and dads rb. and added routes accordingly. its just for apple remote desktop when they have problems. i don't see why people say pptp is insecure though. unless you are a company doing vpn i guess it'll be alright. works for me :).
by TonyJr
Mon Jan 30, 2012 4:42 pm
Forum: General
Topic: Apple Mac - Netstat without the crap
Replies: 1
Views: 625

Apple Mac - Netstat without the crap

Hello, How do you use netstat on a mac with grep or alike to remove the UNIX bit at the end (the shit bit at the end of the print out) - I want it to be like the Windows netstat output. It's bloody annoying having to scroll up all the time when it could be filtered. Drives me nuts. Thanks in advance...
by TonyJr
Mon Jan 23, 2012 5:32 pm
Forum: General
Topic: IPv6 firewall with Tunnelbroker
Replies: 2
Views: 2496

Re: IPv6 firewall with Tunnelbroker

You need rules for the forward chain. Here is my current v6 firewall: /ipv6 firewall filter add action=accept chain=input comment="RB-FW: Allow ICMPv6" disabled=no \ protocol=icmpv6 add action=accept chain=input comment="RB-FW: Accept established connections" \ connection-state=established disabled=...
by TonyJr
Sat Jan 14, 2012 3:45 am
Forum: General
Topic: Difference between backup and export-how to monitor changes
Replies: 6
Views: 6984

Re: Difference between backup and export - how to expect cha

My experience of backup function Is that disabled interfaces become written as 'unknown' in the config script. Therefore I would always recommend an export as a backup. Further to that, - would backup each section individually incase of problems when restoring. Only if you are running it at home -if...
by TonyJr
Fri Jan 13, 2012 6:11 am
Forum: Scripting
Topic: No-IP and HE Tunnel Scripts for v5.11
Replies: 1
Views: 1511

Re: No-IP and HE Tunnel Scripts for v5.11

The HE-NET script does not completely restore IPv6 connectivity upon IP address change of the WAN interface. I have just found out that all IPv6 addresses need to be disabled and then re-enabled. This immediately restores IPv6 connectivity. I will amend the script when I have time and post another r...
by TonyJr
Thu Jan 12, 2012 6:45 am
Forum: Wireless Networking
Topic: Data from known "unknown" device
Replies: 3
Views: 1122

Re: Data from known "unknown" device

From the AP log: 08:51:57 wireless,info Kenepuru: data from unknown device 00:02:6F:48:23:A0, sent deauth 08:51:57 wireless,info Kenepuru: data from unknown device 00:02:6F:48:23:A0, sent deauth 08:51:57 wireless,info Kenepuru: data from unknown device 00:02:6F:5E:16:4D, sent deauth 08:51:57 wirele...
by TonyJr
Thu Jan 12, 2012 6:43 am
Forum: RouterBOARD hardware
Topic: how to install a new software for RouterBOARD SXT 5HnD
Replies: 1
Views: 566

Re: how to install a new software for RouterBOARD SXT 5HnD

hi every one..
any one have an idea ..how to install a new software for RouterBOARD SXT 5HnD?
my friend have one.its proplem is with operating software..
with thank
Search NetInstall
by TonyJr
Thu Jan 12, 2012 6:39 am
Forum: Beginner Basics
Topic: can not access internet
Replies: 11
Views: 1387

Re: can not access internet

Hi, This is my first application on routerboard. The Ips are as bellow: Laptob 192.168.88.2 Station : ether1: 192.168.88.254 wlan : 192.168.1.2 AP bridge : wlan: 192.168.1.1 ether1 : 192.168.1.253 I can ping from labtop all the above IPs. I can access internet from IPAD and another labtop by using ...
by TonyJr
Thu Jan 12, 2012 6:36 am
Forum: Beginner Basics
Topic: Another bricked RB751U-2HnD?
Replies: 2
Views: 1833

Re: Another bricked RB751U-2HnD?

I have the same exact symptoms as the forum member listed below where his RB751U-2HnD bricked on him after very small usuage: http://forum.mikrotik.com/viewtopic.php?t=55429 I just bought (10) RB751U-2HnD units from StreakWave, setup one of them and have been using it since last weekend. I initiall...
by TonyJr
Thu Jan 12, 2012 6:34 am
Forum: General
Topic: Solution for bandwith control with traffic usage
Replies: 1
Views: 356

Re: Solution for bandwith control with traffic usage

Hello, I need to reduce the bandwidth of the customers after some bandwidth usage, for example, the user have a 2mbps internet link but if he download 10GB the bandwidth goes down to 500kbps. The customer just will have the full bandwidth again on the next month. Someone knows how to do this? Thank...
by TonyJr
Wed Jan 11, 2012 7:30 pm
Forum: Scripting
Topic: No-IP and HE Tunnel Scripts for v5.11
Replies: 1
Views: 1511

No-IP and HE Tunnel Scripts for v5.11

Had a lot of trouble getting existing scripts working, so I have put bits and pieces from the Forum and Wiki together to make scripts that work. These work for definate on v5.11 . I have kept them seperate incase you don't need one or the other. Finished them now. I have them setup so the DDNS one i...
by TonyJr
Wed Jan 11, 2012 8:15 am
Forum: Forwarding Protocols
Topic: Need help assigning public IP segments to customers
Replies: 5
Views: 1600

Re: Need help assigning public IP segments to customers

Hello Mikrtoik Community, I need your help. I already have Mikrotik experience, but this is the first time I face this configuration, and so far, I’ve been unsuccessful. Connection Diagram: ISP->RB1200->Switch->N Customers What I want to do: I want to give each of my customers a /29. My ISP gives m...
by TonyJr
Wed Jan 11, 2012 8:00 am
Forum: Scripting
Topic: Fetch command - What can and can't it do?
Replies: 6
Views: 8437

Re: Fetch command - What can and can't it do?

Hi RabbitAtNet,

Are you able to share your two (DNS and HE.net) update scripts at all, please? I'm struggling quite a bit to get the scripts already posted in the Forum and Wiki going.

Thanks,

Tony
by TonyJr
Wed Dec 21, 2011 2:16 pm
Forum: Wireless Networking
Topic: R52Hn + Blackberry Devices - Strange Behaviour
Replies: 0
Views: 703

R52Hn + Blackberry Devices - Strange Behaviour

Hello, I am having some strange behaviour occurring with Blackberry devices and a R52Hn wireless card. After a Blackberry device connects wirelessly, a certain amount of time elapses, then a deauth is sent many times and eventually the device re-registers wirelessly. This occurs in an infinite loop,...
by TonyJr
Thu Dec 15, 2011 10:52 pm
Forum: General
Topic: Add something to Wiki
Replies: 0
Views: 303

Add something to Wiki

Hi,

I would like to add a 3G modem to the compatible hardware section of the Wiki. How can I do this as I see now signup button?

Reference Thread: http://forum.mikrotik.com/viewtopic.php ... 67#p295054

Tony
by TonyJr
Thu Dec 15, 2011 11:58 am
Forum: General
Topic: SOLVED: Huawei E122 and RB493G
Replies: 4
Views: 3406

Re: SOLVED: Huawei E122 and RB493G

Hello, The correct PPP settings for Huawei E122 on 3 UK Network are default settings when adding a new PPP Client, but press advanced and add these also: port=usb2 <---change accordingly data-channel=0 info-channel=2 apn="3internet" dial-command="ATDT" dial-on-demand=yes <---change accordingly add-d...
by TonyJr
Thu Dec 15, 2011 1:58 am
Forum: General
Topic: Orange UK UMA and Ports/Protocols
Replies: 0
Views: 329

Orange UK UMA and Ports/Protocols

Hello, I have a Blackberry handset on Orange UK, which when connected to wireless, routes all calls over the internet by using UMA. On my old router, no settings needed to be changed for it work. Call quality was great and there were no delays. I have been trying to get it to work with a Mikrotik ro...
by TonyJr
Sat Dec 03, 2011 6:31 pm
Forum: General
Topic: SOLVED: Huawei E122 and RB493G
Replies: 4
Views: 3406

Re: Huawei E122 and RB493G

Anyone have any ideas on this?

Many thanks!
by TonyJr
Fri Dec 02, 2011 7:00 pm
Forum: General
Topic: SOLVED: Huawei E122 and RB493G
Replies: 4
Views: 3406

Re: Huawei E122 and RB493G

try to enable async,debug logs and check what does it say.Maybe one of your init sting values is causing that problem with the connection. I enabled async,debug log and this is the result: 16:52:07 async,ppp,info 3g-modem: initializing... 16:52:07 async,ppp,info 3g-modem: reseting link... 16:52:07 ...
by TonyJr
Fri Dec 02, 2011 2:25 pm
Forum: General
Topic: SOLVED: Huawei E122 and RB493G
Replies: 4
Views: 3406

SOLVED: Huawei E122 and RB493G

Scroll further down for the solution Hi, I have connected and powered a Huawei E122 to a RB493G. It is showing under resources/usb, and I can get PPP info from it. I have been able to run AT commands on the device. When I set the PPP interface to connect, it gets stuck on dialing out status. I have...
by TonyJr
Wed Nov 30, 2011 11:42 pm
Forum: General
Topic: RouterOS v5.9 released
Replies: 166
Views: 42026

Re: RouterOS v5.9 released

R52Hn - Upgrade has improved signal strength from 54% to 75-76% compared to v5.8
by TonyJr
Thu Nov 24, 2011 4:48 pm
Forum: General
Topic: Connecting two sites over internet and hardware selection Qs
Replies: 5
Views: 962

Re: Connecting two sites over internet and hardware selectio

Thanks Alex - I am going to go with the 751U-2HnD.

Tony
by TonyJr
Fri Nov 18, 2011 11:24 pm
Forum: General
Topic: Connecting two sites over internet and hardware selection Qs
Replies: 5
Views: 962

Re: Connecting two sites over internet and hardware selectio

Thanks Alex. I will watch the video tomorrow when I have spare time.

Any ideas about recommended RB hardware for the other end?

Tony
by TonyJr
Fri Nov 18, 2011 11:13 pm
Forum: RouterBOARD hardware
Topic: 5VUSB UK Stockist
Replies: 2
Views: 784

Re: 5VUSB UK Stockist

Excellent - Thank you very much!
by TonyJr
Fri Nov 18, 2011 1:41 pm
Forum: RouterBOARD hardware
Topic: 5VUSB UK Stockist
Replies: 2
Views: 784

5VUSB UK Stockist

Hello,

Does anyone know of a company in the UK who hold the 5VUSB cable in stock, or in europe who will ship to the UK?

I have just had a refund from 4Gon.co.uk saying that they don't stock the product any more.

Thanks for your help,

Tony
by TonyJr
Fri Nov 18, 2011 3:55 am
Forum: General
Topic: Connecting two sites over internet and hardware selection Qs
Replies: 5
Views: 962

Connecting two sites over internet and hardware selection Qs

Hello, I have a RB493G connected to BT Broadband 7.6m/44k (Three 3G Backup). My parents have Virgin Media 20m/76k but no RB yet. My aim is to have both sites linked by a tunnel over the internet (always connected), which would allow routing between the two LANs (remote support/upgrades, sending file...
by TonyJr
Sat Nov 12, 2011 1:37 am
Forum: Beginner Basics
Topic: Xbox LAN connection between 3 networks with RB750GL
Replies: 28
Views: 2610

Re: Xbox LAN connection between 3 networks with RB750GL

How about.... If the switches were L2 Managed (cheap ones), you could configure them to tag the traffic on the ports for the xboxes to be VLAN'd , then configure the port connecting them to the router board as a vlan trunk, setup a vlan on the RB. Then they will all be on their own VLAN and can talk...