MikroTik

rviteri

Hello, have you seen this from cloudflare https://developers.cloudflare.com/cloud ... connector/ ? Maybe a warp connector can be implemented in ROS? This seems like it would save MK the need to setup relays around the world.

rviteri

I noticed something very strange. Area 1 breaks after installing ZeroTier Package on a core router where several OSPF areas concentrate with the backbone all other areas work just fine. On the router connecting to Area1 I can see all routes under LSA but the core neighbor router is not detected and ...

rviteri

A Script manager so an SD-WAN solution can be implemented. Web/Winbox interface.

rviteri

+1 +1 on this!

rviteri

Why not load an image of a cloud router on DigitalOcean or another VPS provider and configure your mikrotik cloud router to act as a vpn server?

rviteri

https://mum.mikrotik.com/presentations/US12/tomas.pdf

I followed this and it works like magic.

rviteri

Hello! I am running a script on boot that is an infinite loop. For some reason the script stops running after a while (it no long is listed as a job) - maybe around 30 minutes to an hour after being up. Can someone help me see what's going on? BTW this used to work great before. I am running version...

rviteri

The only workaround is to reboot the router. I have not seen any changes in the changelogs with regards to VPN connections.

rviteri

Hello, I have a set up where one router accepts a few pptp connections for site to site connectivity. Unfortunately, about 8 days or so of running the tunnels the server stops accepting connections. This is quite irritating as I have to restart the router. Regardless, L2TP works fine with everthing ...

rviteri

Hello all, I am trying to use netwatch to monitor a WAN connection. To accomplish this I had the following configuration that used to work but now it does not. 1. I created a static route to 8.8.4.4 (google dns) via WAN1 2. had a netwatch script that checks for 8.8.4.4 connectivity This worked like ...

rviteri

Will it automatically resolve the ip address upon reconnect??

rviteri

Hello,

I would like to have access to all the change logs of ROS since V5, anyone knows where I can find this?

rviteri

This is awesome!

rviteri

I just noticed that on my box v6.17 it supports a hostname for the connect-to option of a pptp interface.

Is this correct?

rviteri

Hi, I am running a WDS bridge between to MK, however, the connectioni is unsteady. Where should I start troubleshooting?

Thanks,

R

rviteri

Can one set /interface pptp-client connect-to= hostname in V6?

Thanks,

R

rviteri

My router is rebooting with this error message "router was rebooted without proper shutdown" --- What's the best way to debug?

I have an RB450G.

Thanks,

Ricardo

rviteri

Hi all, I'm getting these error messages: 03:58:20 wireless,debug wlan1: failed to set bridge port for wlan1, reason: device already added as bridge port (6) 03:58:40 wireless,info XX:XX:XX:XX:XX@wlan1: disconnected, received deauth: class 2 frame received (6) 03:58:40 wireless,info XX:XX:XX:XX:XX@w...

rviteri

I'm assuming there is no fix for this, right?

rviteri

I have a WDS network and I have set a watchdog timeout to reboot one of the mikrotik routers if a watchdog ping timesout. The RB751U-2HnD freezes after watchdog timeout - all LEDS end up green, and I have to manually unplug the power supply and plug it back in. This is driving me crazy. I have an RB...

rviteri

About a month ago I sent the support file -- I'm still waiting to hear from someone..

rviteri

My RB751U-2HnD crashes constantly. Sent support file to mikrotik, didn't hear back ever!

System rebooted because of kernel failure
router was rebooted without proper shutdown

all LEDs lit green

sigh....

rviteri

How do you use this script?

rviteri

Hi All, I run a network over vpns and I am routing across the vpn multiple networks. I want to keep a central MK (say 10.0.11.254) with static DNS entries for machines across the network, so I am wondering how can each remote router perform a DNS request to this router (10.0.11.254) only when resolv...

rviteri

Hi, thanks. I will git it a try. I thought everything had to do with the DHCP client options.

rviteri

Hello, How do I clone the mac address of another device? My provider wants me to use an AP that they give out with the service. The problem is that this AP assigns a private IP address instead of the public IP - I know this is nonsense. So I want to clone the MAC address of the AP onto the MK WAN in...

rviteri

Hi Thanks for the reply.

The tomato does have a broadcom chip. Anyway you would suggest a test that this would be in fact the case. I just want to discard that it is just not a configuration issue.

Thanks!

rviteri

Hello, I have a set up where I have 1 Tomato Router and 1 DD-WRT router are connected via WDS using WAP AES encryption. I want to add a MK router rb2011uas-2hnd, but no luck still. The current setup is like this Tomato ----- WDS ----- DDWRT, I want the following: rb2011uas-2hnd ----- WDS ---- Tomato...

rviteri

Hi try this script, this one works behind a NAT. Just modify the lines where you need to update to No-IP DNS # Set needed variables :local username "xxx" :local password "xxx" :local hostname "xxx.dyndns.info" :global dyndnsForce :global previousIP # print some debug in...

rviteri

I've had a bad experience with these units. They hang randomly, I've sent the support files but mikrotik can't find the issue.

rviteri

Doesn't look like it to me..

rviteri

Hello,

Is the RB750UP grounded at the ethernet ports?

Regards,

rviteri

I think you should set your variable using the $ before the name

:set $broadband = [value of some sort ] ;

Also, if you use an if statement it will either return true or false.

I think you should use a combination of a loop and if/else statements.

rviteri

Did this ever get solved? Or all is lost?

rviteri

Copy and paste this into terminal. you may have to alter your interface names in the queues, change the speeds to match your connection. /interface bridge settings set use-ip-firewall=yes / :put "These strings are taken from the L7 filter project and are licensed under GPL See: http://www.gnu....

rviteri

I tried to make a configuration based on your solution using a pfifo and a different method for packet marking and it seems to be working. I had to adjust the pfifo size to 10000 to let the router handle a larger traffic. Hi ToMikaa87, can you post your configuration? I want the same but for VoIP t...

rviteri

Hello, I am interested in a script that detects and keeps track of (in real time) RTP traffic is passing through the WAN interface. If so, issue the command to enable a queue, when RTP traffic ceases to pass (I.E, voice of video call has ended) then disable the QoS script. Is this doable? Any guidel...

rviteri

How is the lobe of irradiation of the RB751 2hnd? Is It omnidirectional? And the AP in the vertical position is it going to transmit omnidirectional or by sector? Or in the indoor use is not going to do difference in the AP position? I found this router to have a poor internal antenna - CCQ is very...

rviteri

I comment on NAT, because 100 calls have no audio 8 on one side, from what I read, would come to be a subject of Symmetric NAT, what do I know my provider, to implement NAT rules in the nat or filter ? As my VOIP provider uses large ranges of ports and ips, to implement the rule becomes non-functio...

rviteri

:delay 30; :local oldcount 0; :local newcount; :while (true) do={ :set newcount [/ip firewall nat get [find comment="MY_VNC"] packets]; :if ($oldcount != $newcount) do={ /tool wol interface=ether2-local mac=00000000000; :set oldcount $newcount; } :delay 60; } create a schedule task for it...

rviteri

I vote for higher gain detachable antennas. Ideally with rp-sma connectors. It'd be more versatile that way.. These type of antennas require 4 extra cost item. For each antenna, 1. Soldering (labor) of the 2. the pigtail from the circuit board to the 3. SMA connectors which would have 4. rubber duc...

rviteri

rb751g-2hnd would work well if it would have an external antenna and the endless random reboots were fixed. I've been looking all over the place for an MMCX connector. When I found it, guess what, it was a 90 angle one and it did not reach all the way in. Could you please clarify what rebooting iss...

rviteri

rb751g-2hnd would work well if it would have an external antenna and the endless random reboots were fixed.

I've been looking all over the place for an MMCX connector. When I found it, guess what, it was a 90 angle one and it did not reach all the way in.

rviteri

RB751U is more expensive, larger and has more output power. RB951-2n is smaller, less expensive and has less output power. Why RB951-2n naming? Is it a new CPU or completely new model? I would give it RB751L-2n or something like that. RB751U/G doesn't works stable for me. Its' wireless performance ...

rviteri

Is the 1.5dBi antenna gain on the RB951-2n enough? I think most SOHO routers have a 5 dBi gain. It works very good even in larger apartments/houses. The RB751U-2HnD says it has 2x2 MIMO PIF antennas, max gain 2.5dBi. It virtually has no gain in my setup and I used it in a SOHO environment. Is this ...

rviteri

Is the 1.5dBi antenna gain on the RB951-2n enough? I think most SOHO routers have a 5 dBi gain.

rviteri

Hello all,

I have the interest to monitor a host using netwatch and execute a script that would connect to another mikrotik and issue a command on that mikrotik.

Is this possible?

rviteri

@runic keep us posted on your results. I will update my device however I am not using it as part of my network anymore...

rviteri

Yes, I did it and I already sent a support file.

rviteri

Very uncool

rviteri

I was able to accomplish the task using the perl API and sending my IP this way.

rviteri

Yes, I have a set of Ip addresses that I want to load into the router as address lists but its over 4096 bytes.

rviteri

Normis, this thing doesn't work. Now it just reboots randomly. Who can fix this?

rviteri

Hello all I need to put the contents of a file which is over 4096 bytes into a variable. How can I do this?

rviteri

Alright, thanks. I'll give it a shot.

rviteri

I am trying to use the :len function. How can I resolve this using this function?

rviteri

Hi I am following this script to add routes to an address-list: http://www.mikrotik-routeros.com/2010/06/freebies-in-sa-or-how-to-download-ip-address-lists-to-a-mikrotik/ The script downloads a text fiel and then uses the function :len to count the characters in the file. I noticed that :len works u...

rviteri

Hello I have a RB751u-2HnD with version 5.14. The device always restarts after I initiate a Skype or FaceTime video call. Then when I reconnect it works fine. How can I fix this? This is extremely annoying.

Thanks,

rviteri

It's brand new... anyway this means to check it elsewhere or is it possible to check it from the router itself?

Regards,

rviteri

Hello all, Less than a week ago I installed an micro SDHC 8 GB on a RB450G for the Webproxy to cache onto. Is seemed to be working just fine. However, I just logged into the router and I see that the disk is no longer listed - it's gone. Anyone has had this happen before? Can anyone help me? Thanks!

rviteri

I added a SanDisk SDHC 8 GB card. It still feels slow.

Any ideas anyone?

rviteri

Hi all, I have noticed that after a few days of the transparent proxy activated internet browsing feels slower. I have a redirect rule that caches traffic from the local bridge and forwards it to the 8080 port of the MK router. I have an RB450G v5.14, I don't have a microSD card on it so everything ...

rviteri

Hi all, I am looking for a way for the router to connect and cache all content from a website down to four or five sub folders (tree) automatically. As if the router itself were to be browsing and caching content. For example: http://www.exampleweb.com loads index.html and within index.html there ar...

rviteri

cool will check it out

rviteri

Hi, did you change line 174 only?

:set vPingReturns [/ping $vPingDest interface=$vPrimaryInterface interval=$vPingInterval count=$vPingCount size=$vPingSize];

did you add interface=$vPrimaryInterface to force it through the gateway that is down?

rviteri

great, I'll check it out!

rviteri

Can the pings go out through certain interfaces?

I.e.
force ping to 208.67.222.222 via the interface of WAN1

Or do you have to select IP address that will only be routable via the interface of WAN1

rviteri

My needs: I have VPN connections from my main router over to several places around the world. I need to be able to route everything across the VPN. Easy to maintain (get rid of static routing). Ideal solution: Enable RIP over the EoIP tunnel. Redistribute networks The Catch: RIP would brake EoIP tun...

rviteri

facebook has 8 letters, twitter does not.

thank you, resolved!

rviteri

You need \x07twitter\x03com

strlen("facebook") = 8 => \x08
strlen("twitter") = 7 => \x07

Genius! Thank you very very much!

rviteri

Hi all, I am trying to route dns request to a specific server based on an L7 regex expession + packet mark + dst-nat This works: \x08facebook\x03com but this doesn't \x08twitter\x03com Ideally I would like to match either or so: \x08(facebook|twitter)\x03com This works /ip firewall layer7-protocol a...

rviteri

I can't find an antenna with the MMCX connector

rviteri

Great pics man! I did a windsurfer once!

rviteri

Hi all, I am trying to route dns request to a specific server based on an L7 regex expession + packet mark + dst-nat This works: \x08facebook\x03com but this doesn't \x08twitter\x03com Ideally I would like to match either or so: \x08(facebook|twitter)\x03com This works /ip firewall layer7-protocol a...

rviteri

No, only four active link and a regular on an Internet surfing. But even in this mode with 24V PSU uptime does not exceed several hours. "Native" 24V PSU tried two things - with both equally unstable. p.s. It is still checking PSU. Ahead - a study with an oscilloscope. )) Really, oscillos...

rviteri

Anyone knows of any external antennas with an MMCX connector?

rviteri

If you are in an apartment what other 2.4 ghz ap's are running nearby ? Use wireless snooper to help choose a channel. Also sometimes lower power is better. Perhaps changing channel will help. Also be sure under HTm both chains are enabled. I am getting pretty reliable access in a 100m2 building as...

rviteri

Thanks for the input. Do you have a pic of your creation?

rviteri

Hello all, I got an RB751u-2HnD to use as a home router. I have small apartment and everytime I move to the other room (thats about 7 meters away) I randomly get disconnected. The power output of the router is in default (its supposed to be a 1W power output which should be enough). Can someone plea...

rviteri

Yes, redirected port 80 to 8080.

rviteri

So will this ever be fixed at all?

rviteri

Hello all, I enabled my proxy for transparent use (port 80 to 8080 redirection) I have internet access but the status lists as everything as Zero. I have a RB450G and I have anabled up to 200 mbyte of ram to use as a cache as I don't have any usb drives connected. Thanks for the advise, Status Uptim...

rviteri

navidrasi, I am also looking for a script for a similar purpose can you please tell me how this script works?

Does it check every time a connection is made to a new website?

rviteri

Will openwrt meta router be stable on this device?

rviteri

Hi, is openwrt now stable in 450G? Or does it keep randomly rebooting in this version as well?

rviteri

rviteri

I am just using metarouter so I can load OpenVPN into OpenWRT to use UDP as the transport protocol. If MT could just add the UDP option for OpenVPN instead of only TCP I bet it would solve some problems out there.

Search found 87 matches