Just to be on the safe side, did you tried to netinstall it? Otherwise , RMA It and call it a day.

If i understand correctly your case, you should use the option "remote agent " , to ping a remote site by using a man in the middle (in your case,the 750). The agent must be a routeros device, with the proper credentials and routeros box checked. The wiki describe the case in a very detail...

Till v.6.35 if i recall correctly, i had similar issues *without* using capsman (which i recently discover and playing around) and combination of iDevices in power saving mode (or locked screen mode). I remember that i tweaked the parameters on the physical interface like multicast helper and wmm su...

Thank you so much for all of this info! , helped me a lot. I tried to resolve as much as I can, and by keeping monitoring everything is quite stable! I can't understand why DHCP keep doing this error as attached in the Pic It seems that something is misconfigured on the hotspot interface. Do you re...

Hi In your pcc rules you have missed the following parameter "dst-address-type=!local hotspot=auth" Also use winbox with safe mode enabled in case you get disconnected with mikrotik (it will not commit changes and it will revert back) Dont use both addresses and ports on your pcc classifie...

I said "not the answer i was hoping for" and maybe i didn't get it right away what jarda meant at first glance. You are right, DCHP served lan with lot of static entries and port forwards that are beyond my control, and of course non documented, unfortunately. I will try to be creative now...

Not exactly the answer i was hoping for, thanks anyway.
There's no chance to disable or re-configure the 192.168.1.0/24 due to number of devices (>120).

I will continue searching..

Hi all, This is my first technical post, so, bear with me. For sure it belongs to category "Can it be done?" I have an interesting installation in an NGO (Non Goverment Organisation) where i'm struggling for the past few days and i ran out of ideas. Any suggestion is more than welcomed. I'...

+$$$

For future reference, if somebody needs the info.

The spec's of RB600 capacitors are :

four 680uF 6.3V
three 100uF 63V

Hi to all, Does somebody has a full list with the capacitor specifications (voltage rating and capacity) ? My boards are still on the tower, have no spare, and i will try to repair them on site. (200 km away from here) I'll buy in advance the capacitors, so i'd be *GREATFUL* if this piece of informa...

Hi all, After beeing visitor in the forums for a long time (thank you! community for the tons of information!) i've decided to describe in detail my "adventure" with RB 600A's. Please bear with me to describe the current status: My network consists of several 433's, 411's and two RB 600A w...