Community discussions

Search found 351 matches

  • 1
  • 2
by TheWiFiGuy
Tue Jan 26, 2016 1:07 am
Forum: Scripting
Topic: Hotspot with captive portal
Replies: 2
Views: 3446

Re: Hotspot with captive portal

Theres loads of ready to run solutions on the Made for Mikrotik page :

http://www.mikrotik.com/mfm?mfm_category=3
by TheWiFiGuy
Mon Jan 26, 2015 11:58 am
Forum: Wireless Networking
Topic: Wireless probe
Replies: 15
Views: 3611

Re: Wireless probe

@Jarda Its totally possible. You look in the frame of the wireless packet and you will see MAC addresses. Devices are constantly looking for known SSIDs to connect to and send out Probe requests to determine if those SSIDS are nearby. You can capture those and get the required information. You can a...
by TheWiFiGuy
Mon Jun 23, 2014 12:10 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

Re: 10min free access script only to complete voucher purcha

Yeah, I chose not to help based on your comments in the thread, and then on your private Karma email... I don't owe you a resolution to your problem -I chose to investigate and solve my own problems, and its comments like yours that cause those with experience in this industry to keep our knowledge ...
by TheWiFiGuy
Sun Jun 22, 2014 10:51 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

Re: 10min free access script only to complete voucher purcha

Ehman, Thanks for decreasing my Karma. We run circa 30,000 Access points in the UK and Europe, some 10,000+ are Mikrotik, with the remaining being Ruckus. We take around $xxx,000 per week in Credit Card payments using the same payment providers as T-Mobile and many of the largest WiFi HotSPot compan...
by TheWiFiGuy
Sat Jun 21, 2014 9:51 pm
Forum: General
Topic: 3D Secure + hotspot = no sale
Replies: 15
Views: 3355

Re: 3D Secure + hotspot = no sale

Use a payment processor that deals with the 3DS side of the transaction - they do exist and they host all the pages including the 3DS secure site of things on a single domain name.
by TheWiFiGuy
Sat Jun 21, 2014 9:46 pm
Forum: Scripting
Topic: 10min free access script only to complete voucher purchase
Replies: 6
Views: 1916

Re: 10min free access script only to complete voucher purcha

There are payment gateways that deal with the 3DS for you ( they host the 3DS validation stage). We use one ourselves for this very reason and can confirm it works fine.
by TheWiFiGuy
Mon Jun 02, 2014 10:50 am
Forum: General
Topic: Routerboard as DNS
Replies: 4
Views: 1213

Re: Routerboard as DNS

Its all very well to say you never had a problem, but uptime is 2days on that screenshot, and CPU is 7%. How many users, logins, DNS requests per day are you talking? On a hotspot with 2000+ logins per day, typically 1400 online at any one time, we do see DNS taking a huge battering - some of which ...
by TheWiFiGuy
Sun Jun 01, 2014 9:20 pm
Forum: General
Topic: Routerboard as DNS
Replies: 4
Views: 1213

Re: Routerboard as DNS

The only direction I can point you in is to not use Mikrotik as DNS server - it causes us no end of problems! In fact, had a DNS stop resolving today on a CCR 6.13 , resulting in 1000+ users on a hotel network not being able to browse the net.
by TheWiFiGuy
Thu May 15, 2014 6:50 pm
Forum: General
Topic: Supported X86 hardware
Replies: 2
Views: 1337

Supported X86 hardware

Hi

Im needing to build an X86 based RouterOS device but the supported X86 systems on the Wiki are pretty old.

Does anyone know if the Dell R210 works ( ideally with SSD drive). If not, can anyone please recommend an off the shelf X86 server?

Thanks
by TheWiFiGuy
Thu Apr 24, 2014 8:04 am
Forum: General
Topic: Local and remote DNS resolution for Hotspot
Replies: 4
Views: 1324

Re: Local and remote DNS resolution for Hotspot

What you are asking for exactly is not possible, although there are workarounds. Do you need to be able to provide users with the ability to log out, if not, once a user has logged in you can use SRC NAT rules to forward authenticated users traffic to a remote DNS server which will ease the load on ...
by TheWiFiGuy
Mon Apr 07, 2014 3:44 pm
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 1973

Re: How do I check if my Mikrotik is infected

Also check System -> History to see any previous logins and what commands / settings where changed.
by TheWiFiGuy
Mon Apr 07, 2014 3:42 pm
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 2581

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

Mikrotik cannot force Freeradius to delete entries from the radacct table. Freeradius handles the connection and accounting database records (nowhere is their a delete with regards to radaact) so it sounds like a problem with your Freeradius, or Database setups. Hello TheWifiGuy, Because, same mach...
by TheWiFiGuy
Mon Apr 07, 2014 10:31 am
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 2581

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

Mikrotik cannot force Freeradius to delete entries from the radacct table.

Freeradius handles the connection and accounting database records (nowhere is their a delete with regards to radaact) so it sounds like a problem with your Freeradius, or Database setups.
by TheWiFiGuy
Thu Apr 03, 2014 11:29 pm
Forum: Scripting
Topic: Check locked PPPOE, PPTP, L2TP, SSTP, OVPN* PPP* connections
Replies: 13
Views: 7563

Re: Check locked PPPOE, PPTP, L2TP, SSTP, OVPN* PPP* connect

Are you not seeing the PPP connection sometimes hang? Ive been using a very similar script on 500+ 411's with Huawei modems and whilst it works for the most count, at least once per day PPP totally freezes (watchdog may kick in and reboot). We also see the USB in /ports disapear and re-appear with a...
by TheWiFiGuy
Thu Mar 27, 2014 12:11 am
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 56595

Re: CAPs Manager

Roaming is NO1 thing which controller needs to provide. Without that it's pointless.
Thats not true. For you it may be pointless, for me, being able to set the SSID across 400+APs is a huge benefit. Of course, I still want the roaming feature too, but every step is a step in the right direction.
by TheWiFiGuy
Sat Mar 22, 2014 12:32 pm
Forum: General
Topic: 6.10 supout.rif and kernal panics
Replies: 9
Views: 1856

Re: 6.10 supout.rif and kernal panics

I get the same thing problem on RB750, RB450, RB1100. It also happens if the state of a ppp interface changes, 95% of the time it reboot and hangs on, you have to remove the power to get it working again We too are seeing this : Just rolled out 250 3G units for coaches, and have the system hang ran...
by TheWiFiGuy
Wed Mar 19, 2014 10:05 am
Forum: Wireless Networking
Topic: Hotspot clients can't connect: no more IPs assigned by DHCP
Replies: 4
Views: 1443

Re: Hotspot clients can't connect: no more IPs assigned by D

Hi

It sounds like you dont have the idle-timeout in /ip hotspot set low enough - typically 5m is fine and it clears down un-authenticated users nice and quickly. Note: This is not related to a users idle-timeout which logs them off.
by TheWiFiGuy
Wed Mar 05, 2014 5:32 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 56595

Re: CAPs Manager

At the MUM all screenshots showed 6.11RC1, however, our advanced release of the 6.11 DIDNT include it. I last checked when at the MUM, so it may of made it into the beta now.
by TheWiFiGuy
Wed Mar 05, 2014 12:32 am
Forum: RouterBOARD hardware
Topic: Heavy duty hotspot hardware,CCR1016-12 or RB1100AHx2 or x86?
Replies: 3
Views: 3531

Re: Heavy duty hotspot hardware,CCR1016-12 or RB1100AHx2 or

An 1100ah2 will handle this easily: Just logged onto one of ours, has 1135 active connections on a 100MB fibre, CPU is at 39%

This box often has 1800+ users, cpu maybe around the 50% mark.
by TheWiFiGuy
Tue Feb 25, 2014 9:41 pm
Forum: General
Topic: Blocking Slowloris DDoS
Replies: 1
Views: 880

Blocking Slowloris DDoS

Hi Ive recently had our web server farm decimated by someone carrying out a Slowloris attack against us. For information on slowloris see: http://ha.ckers.org/slowloris/ Has anyone got any firewall rules they would care to share that could help block such attempts (it may require L7 detection). I'll...
by TheWiFiGuy
Fri Feb 21, 2014 10:44 am
Forum: Virtualization
Topic: Pre Build Images for Webserver
Replies: 2
Views: 2508

Re: Pre Build Images for Webserver

I cant even get an image running. I import the image, RB keeps rebooting.

Im thinking this is not the way to go now...
by TheWiFiGuy
Tue Feb 18, 2014 12:33 am
Forum: Virtualization
Topic: Pre Build Images for Webserver
Replies: 2
Views: 2508

Pre Build Images for Webserver

Hi Im really stumped with this Metarouter stuff. It looks like it should be easy, but I just end up with rebooting 951s. I simply need to run webserver on my Mikrotiks so I can serve some local content, so OpenWRT with apache2 on fits the bill. Could someone please point me in the direction of a wor...
by TheWiFiGuy
Fri Feb 14, 2014 1:41 pm
Forum: General
Topic: Hotspot login without to open any browser?
Replies: 14
Views: 3594

Re: Hotspot login without to open any browser?

First options - no way this can be done.
For the second - how i can limit EACH device with PCC queue ???
Sorrry, Typo! PCQ as listed above.
by TheWiFiGuy
Fri Feb 14, 2014 1:41 am
Forum: General
Topic: https problem on hotspot
Replies: 97
Views: 90801

Re: https problem on hotspot

Hotspot does not redirect SSL 443 sites , unless you enable HTTPS redirection and run the hotspot on 443 on the Mikrotik.

You will then substitute the lack of redirects for an HTTPS certification error.
by TheWiFiGuy
Fri Feb 14, 2014 12:43 am
Forum: General
Topic: Hotspot login without to open any browser?
Replies: 14
Views: 3594

Re: Hotspot login without to open any browser?

Two options: 1) Educate clients using in room table cards telling them how to use the WiFi 2) Disable hotspot and instead use a PCC queue to limit each user to 1M/0.3MB Option 2 should work fine, but you will loose the ability to see who's 'online' , but a quick check of the Bridge Host table (assum...
by TheWiFiGuy
Thu Feb 06, 2014 9:09 pm
Forum: Scripting
Topic: Passing to Paramater to script via API
Replies: 2
Views: 1058

Re: Passing to Paramater to script via API

Hi

Thanks for taking the time to leave such a detailed post, i;ll be looking into it next week when the workload dies down a bit. If only Mikrotik would release a 'login user' API call.
by TheWiFiGuy
Wed Feb 05, 2014 11:54 pm
Forum: Scripting
Topic: Passing to Paramater to script via API
Replies: 2
Views: 1058

Passing to Paramater to script via API

Hi, Cant work out if this is possible..... We currently run an API connection to our HotSpots from our managment system allowing our support team to manually bypass a users mac address if for some reason they cant see the portal. Basically, the API does this: Adds a mangle rule to mark the bypased u...
by TheWiFiGuy
Wed Jan 29, 2014 1:03 am
Forum: Scripting
Topic: Resetting 3G connection (not PPP) when 3G signal is poor
Replies: 0
Views: 561

Resetting 3G connection (not PPP) when 3G signal is poor

Hi All Im playing around using a 3G modem and have found that that a Mikrotik doesnt work anywhere near as well as a MiFi device when using 3g (through no fault of its own). The modems need to be told to re-associate with the cells when the signal drops otherwise they just stick with a very low sign...
by TheWiFiGuy
Wed Jan 22, 2014 8:47 pm
Forum: Wireless Networking
Topic: Best Wireless Repeater protocol/method to use?
Replies: 2
Views: 985

Re: Best Wireless Repeater protocol/method to use?

As stated above, if you can wire them back to a switch, then simply set the units up to transmit the same SSID on different channels (1 and 11 say) and it will work fine.

If only one can be wired, then put them in AP-BRIDGE and use WDS. Mesh is not really applicable in this instance.
by TheWiFiGuy
Wed Jan 15, 2014 11:08 pm
Forum: General
Topic: Free MUM entry vouchers for everyone with positive Karma
Replies: 13
Views: 3414

Re: Free MUM entry vouchers for everyone with positive Karma

We have started to give free routers to every participant, so this kind of eliminates the need for any special ticket.
Nah, give us a free Lunch too ;-) Ive still emailed just in case, as you cant eat a router!
by TheWiFiGuy
Mon Jan 13, 2014 10:59 pm
Forum: Scripting
Topic: Colubris radius attributes
Replies: 0
Views: 636

Colubris radius attributes

Hi All . Sorry for off-topic post but really need to reach out and see if any of you can help me. I need to track down a radius attribute for the Colubris controllers to expire an account on a certain date time (similar to wispr-session-terminate-time ), however the Colubris uses a AVPAIR and not st...
by TheWiFiGuy
Thu Jan 02, 2014 1:24 pm
Forum: Wireless Networking
Topic: Maximum Hotspot Users Anyone
Replies: 4
Views: 4911

Re: Maximum Hotspot Users Anyone

Regularly have 200 users on rb2011 / rb951 with circa 45% CPU
Seen 2000+ on a RB1100AH peaking around 14% CPU

These are concurrent users, not total paying customers.

Thats using lots of VLANS, bridge firewall and software buffer on the interface (slower)
by TheWiFiGuy
Mon Dec 30, 2013 11:22 pm
Forum: Wireless Networking
Topic: Mikrotik vs Ubiquiti Unifi
Replies: 23
Views: 17540

Re: Mikrotik vs Ubiquiti Unifi

Uni-fi is a good solution but it has a flaw in design (atleast from my point of view). The flaw is that you need a Windows machine in order to run Uni-fi controller software which has to be in the same subnet as the AP's (it searches and communicates with AP's via layer2). This sets up price much h...
by TheWiFiGuy
Fri Dec 20, 2013 9:49 am
Forum: Wireless Networking
Topic: Mikrotik vs Ubiquiti Unifi
Replies: 23
Views: 17540

Re: Mikrotik vs Ubiquiti Unifi

+1 Mikrotik! We install millions of dollars of Ruckus kit each year and were now looking at UniFI in instances where Ruckus is too expensive. You mentioned the Wireless controller many, many months ago, but no updates since. If you could do an enterprise AP , Ie - Anything with 802.af for power , Du...
by TheWiFiGuy
Wed Dec 18, 2013 12:27 am
Forum: Scripting
Topic: Facebook - Allow login pages, but restrict root site
Replies: 1
Views: 866

Facebook - Allow login pages, but restrict root site

Hi All We have developed our own WiFi Management platform that allows login via FB, Twitter, LinkedIn, Google+ etc, and have had to add facebook.com and the assocaited domains into the ip walled garden settings. Unfortunatly, this allow unauthenticated users access to the sites without logging in, s...
by TheWiFiGuy
Tue Dec 17, 2013 9:55 am
Forum: Wireless Networking
Topic: howto connect mikrotik to other vendor access point device
Replies: 5
Views: 1437

Re: howto connect mikrotik to other vendor access point devi

Just connect it to the device using a CAT5 cable.

I'd give up the networking job and concentrate on your budding career as a top class technical document specialist, as the problem was laid out so well and made it so easy for us to understand your problem and provide you with help.
by TheWiFiGuy
Tue Dec 17, 2013 9:52 am
Forum: Wireless Networking
Topic: wireless network for a dormitory
Replies: 3
Views: 1068

Re: wireless network for a dormitory

Have you thought about using the Mikrotik as a controller, and combining it with something like the UniFI PRO (2.4/5G) dual band? It also supports fast roaming across APS, which is good for VOIP. Until Mikrotik give us some more news on their WLAN Controller, its hard to justifiy Mikrotik radios for...
by TheWiFiGuy
Wed Dec 11, 2013 11:46 pm
Forum: Wireless Networking
Topic: SSL connection error in my RB 751G
Replies: 8
Views: 2909

Re: SSL connection error in my RB 751G

set a static dns entry to force google to not be ssl - google non-ssl.
by TheWiFiGuy
Wed Dec 11, 2013 12:48 am
Forum: Wireless Networking
Topic: WDS Limits
Replies: 4
Views: 1723

Re: WDS Limits

We usually try and limit to around 4 , but have sites working very well with 7 units, all static-wds (no dynamic) and results are what we in the trade call excellent.

We have at least 150 sites with a minimum of the 4 wds repeaters off a single groove.
by TheWiFiGuy
Sun Nov 03, 2013 12:00 am
Forum: General
Topic: OpenWRT for Webserver functionality on Mikrotik
Replies: 1
Views: 811

OpenWRT for Webserver functionality on Mikrotik

Hi All I have a situation where I really need to provide a simple web server to my WiFi customers to host some local content (its a 3G network). I already have DNS catch-alls kick in when the 3G is down, so clients can resolve the DNS. I assume OpenWRT would be the best bet running on Metarouter? Th...
by TheWiFiGuy
Thu Oct 24, 2013 4:58 pm
Forum: Scripting
Topic: Setting Active Hotspt users to static IP
Replies: 0
Views: 1002

Setting Active Hotspt users to static IP

I am running into an issue which Mikrotik are now alluding to, but require a support.rif file , however, I keep forgetting to send it when resolving the issue. Basically, If an IP is active in /IP Hotspot Active, (but the user is idle for say 14 hours) then the DHCP server will remove and re-assing ...
by TheWiFiGuy
Tue Oct 22, 2013 10:19 pm
Forum: Wireless Networking
Topic: Mikrotik Wireless Controller
Replies: 54
Views: 17180

Re: Mikrotik Wireless Controller

Whatever happened to this?

You wet our interest, then pile on less needed functionality like SMB! Give us some update please....
by TheWiFiGuy
Fri Oct 11, 2013 7:01 pm
Forum: General
Topic: Mikrotik Hotspot and IOS7 CNA problems
Replies: 30
Views: 26754

Re: Mikrotik Hotspot and IOS7 CNA problems

We are actually making full use of the captive portal helpers built into as many of the different O/S as possible to fight the issue with Apple etc now using Google as the embedded search (and search being an SSL site now). Our support calls dropped by around 300 per month once we removed apple.com ...
by TheWiFiGuy
Wed Oct 09, 2013 1:01 am
Forum: Scripting
Topic: how to login from external server using api
Replies: 9
Views: 3747

Re: how to login from external server using api

@MikroTik How about either adding this ability, or explicitly clarifying it's not possible somewhere in the manual? This is becoming a very frequent question. +1 (again!) @Mikrotik: As your products get better, more of us will be migrating from enterprise (read Green Box) solutions and this is some...
by TheWiFiGuy
Fri Sep 27, 2013 7:13 am
Forum: General
Topic: DHCP and HOTSPOT ACTIVE lease issue
Replies: 7
Views: 6153

Re: DHCP and HOTSPOT ACTIVE lease issue

After 1 hour, if you are no longer active on the network, the DHCP server will re-assign the IP address to a new user, despite it already knowing its assigned (and active) on the hotspot. Am I doing this on ethernet or wireless? On the ethernet computer, it is sitting inactive logged in to the hots...
by TheWiFiGuy
Fri Sep 27, 2013 12:43 am
Forum: General
Topic: DHCP and HOTSPOT ACTIVE lease issue
Replies: 7
Views: 6153

Re: DHCP and HOTSPOT ACTIVE lease issue

Quote: THe problem is the user is on Idle-Timeout, no longer attached to the network, so DHCP reassigns the lease as it can no longer ping the client. Not true. It matters not if the client is connected or not. If the lease is for 24 hours, that client has that lease reserved for 24 hours. The dhcp...
by TheWiFiGuy
Thu Sep 26, 2013 1:00 pm
Forum: General
Topic: DHCP and HOTSPOT ACTIVE lease issue
Replies: 7
Views: 6153

Re: DHCP and HOTSPOT ACTIVE lease issue

THe problem is the user is on Idle-Timeout, no longer attached to the network, so DHCP reassigns the lease as it can no longer ping the client. But the IP/MAC combination doesn't get removed from the /IP HotSpot Active as I want the user to be able to come back into the hotel at the end of the day a...
by TheWiFiGuy
Wed Sep 25, 2013 11:25 pm
Forum: General
Topic: DHCP and HOTSPOT ACTIVE lease issue
Replies: 7
Views: 6153

DHCP and HOTSPOT ACTIVE lease issue

Hi Can anyone advise on the correct way to handle this situation: DHCP lease is set to say 1 hour. User gets and IP, logs in to hotspot and is assigned by radius a 24 hour Idle-Timeout. The hotspot create a rule with IP and MAC in HOTSPOT ACTIVE view. However, even though the hotspot knows the user ...
by TheWiFiGuy
Wed Sep 25, 2013 11:09 pm
Forum: Scripting
Topic: Add active users with session limit to HotSpot through API
Replies: 3
Views: 1457

Re: Add active users with session limit to HotSpot through A

Not possible at present. I too have asked for api access to authenticate a user as opposed to having to do a client side redirect.

Its also required to provide proper client support to log a user in usings a subscriber table , rather than having to bypass a user eith no bandwidth profile.
by TheWiFiGuy
Wed Sep 18, 2013 7:15 pm
Forum: Beginner Basics
Topic: Using a PPTP tunnel as the default gateway
Replies: 3
Views: 1165

Using a PPTP tunnel as the default gateway

Hi Hope someone can help me overcome this strange problem I am having. We have some (500) RB's with 3G cards in. We create a PPTP tunnel back to our core routers and set it as the default gateway. The 3G units have a wifi card, and run hotspot services. However, we have major problems with the traff...
by TheWiFiGuy
Fri Sep 06, 2013 5:12 pm
Forum: Scripting
Topic: Get Wireless Sniffing results via API
Replies: 7
Views: 2929

Re: Get Wireless Sniffing results via API

Hi Leeroy

Ive been working on such a system too, do you care to share your work (outside of forums if required) as ive also got quite a few working protoypes using different platforms and hardware. Would be good to compare results.

richedav@gmail.com
by TheWiFiGuy
Wed Sep 04, 2013 8:54 am
Forum: General
Topic: android devices are not working in Hotspot
Replies: 2
Views: 1959

Re: android devices are not working in Hotspot

Have you by any chance set the DHCP server to give out a /32 subnet mask?

If so, remove it as Android devices wont always work unless a its a /24 or lower.
by TheWiFiGuy
Wed Sep 04, 2013 8:48 am
Forum: General
Topic: RB1100 hotspot hangs every 3 days
Replies: 13
Views: 2616

Re: RB1100 hotspot hangs every 3 days

Without more information , I cant really impart any help, however, I can say that we have many RB1100 units in such situations with uptime running into the hundreds of days, using significant AP and VLAN deployments. Some off the cuff questions: Are you running out of DHCP leases? IS the IP Pool big...
by TheWiFiGuy
Wed Sep 04, 2013 8:14 am
Forum: Scripting
Topic: Scripting - FIND with Wildcard
Replies: 9
Views: 8565

Re: Scripting - FIND with Wildcard

Thank you guys, I can now run this fine from the terminal, but when pasting my code into a script , I have a problem with the Tilde character directly after the where statement causing problems. comment~"^BP\:.*$"] ^-This character gets flagged up when running /sys scr print as being bad and stops t...
by TheWiFiGuy
Mon Sep 02, 2013 3:37 pm
Forum: Scripting
Topic: Scripting - FIND with Wildcard
Replies: 9
Views: 8565

Scripting - FIND with Wildcard

Hi Im trying (unsuccessfully) to find some comments based on using a wildcard: I have some hotspot ip-binding(s) that have a comment such as 'BP:9' I simply need a way to find the comments that start 'BP:' , so that I can decrease the number after BP: and when it reaches 0, i'll remove the entry. I ...
by TheWiFiGuy
Thu Aug 22, 2013 11:03 pm
Forum: Wireless Networking
Topic: Please can we have a version 6.x that actually works!
Replies: 2
Views: 824

Re: Please can we have a version 6.x that actually works!

We're another UK WiFi provider, with well over 5,000 Mikrotik Wireless devices running various versions of 6.x Were seeing stable performance, good network links and very limited support calls - most of which are user error logging into system etc, not hardware related. Have you checked your configu...
by TheWiFiGuy
Thu Aug 15, 2013 9:30 pm
Forum: Wireless Networking
Topic: Smartphone detector?
Replies: 6
Views: 1826

Re: Smartphone detector?

Pretty limited functionality until Mikrotik make the snooper API better - you cant detect client mac using API as its an interactive CLI command. They have been asked.

You could also look into airmon-ng on OpenWRT too.
by TheWiFiGuy
Tue Jul 09, 2013 1:17 am
Forum: General
Topic: Virtual AP's
Replies: 1
Views: 407

Virtual AP's

Just set a bridge horizon. Setting the horizon to the same value on ports stops them communicating.
by TheWiFiGuy
Thu Jul 04, 2013 12:07 am
Forum: General
Topic: Add VLAN to Bridge Ports Crashes
Replies: 11
Views: 2307

Re: Add VLAN to Bridge Ports Crashes

Your not suppose to put vlans on an interface in a bridge. Instead put them on the bridge interface. Ive not heard this before, and there are many articles contradicting this. That being said, after reading your post, ive also found articles suggesting this is the correct way. Normis: Can we have a...
by TheWiFiGuy
Wed Jun 26, 2013 6:53 pm
Forum: General
Topic: Hotspot Walled Garden https problem
Replies: 23
Views: 24033

Re: Hotspot Walled Garden https problem

By the way, in my case the list of dynamic rules in WG/firewall and NAT is growing continuously. By the moment I can see about 1000 entries! I wonder if it will make a "flush" in any moment or it will fill all the memory of the router... Dont worry, we have over 10,000 entries for some sites with l...
by TheWiFiGuy
Wed Jun 26, 2013 6:43 pm
Forum: General
Topic: Hotspot Walled Garden https problem
Replies: 23
Views: 24033

Re: Hotspot Walled Garden https problem

Of course, you could just do i the way I posted twice. Using DNS HOSTNAMES in /IP walled-garden-ip results in ROuterOS resolving ALL ips against a domain, every few seconds. We use for 1000's of sites using Paypal, Facebook and other social media connectors. We deal with 5,000,000+ logins per month,...
by TheWiFiGuy
Thu Jun 20, 2013 5:17 am
Forum: General
Topic: Mesh network - how to set up?
Replies: 2
Views: 977

Mesh network - how to set up?

If you only have 2 devices, why use mesh and not simple WDS?
by TheWiFiGuy
Wed Jun 19, 2013 6:01 pm
Forum: General
Topic: assign domain to hotspot users
Replies: 8
Views: 1270

Re: assign domain to hotspot users

Are you not using the Mikrotik as the hotspot server then? How / what is assigning IP to your customers?

Hotspot uses the DHCP server. If your not using Hotspot / DHCP on the TIK, I'd guess your out of luck.
by TheWiFiGuy
Wed Jun 19, 2013 2:57 am
Forum: General
Topic: assign domain to hotspot users
Replies: 8
Views: 1270

Re: assign domain to hotspot users

In IP/DHCP/NETWORK , edit the network and you will see a domain option....

Not tried it, but looks like it should set the domain.
by TheWiFiGuy
Tue Jun 18, 2013 11:01 am
Forum: General
Topic: Failover - NAT with Routed IP
Replies: 1
Views: 560

Failover - NAT with Routed IP

Hi All I need to install a failover on a network that uses routed IP, and cant quite work out where to put my masquare/nat rule. [IPTV SERVER] 176.226.x.3 (Default GW is the CCR) | | [CCR1036] 176.226.x.2 ----------> NEW ISP ---------> 195.109.x2 | | [ISP1] 176.226.x.1 So, Cloud Core router has 3 et...
by TheWiFiGuy
Mon Jun 10, 2013 12:55 am
Forum: General
Topic: Hotspot Rediret
Replies: 1
Views: 712

Re: Hotspot Rediret

Simples.

There is a radius attribute you can pass to force a redirect, but the simples method is to modify the login.html file and set the dst variable in the form to the URL you want the user redirected to.
by TheWiFiGuy
Sun Jun 02, 2013 10:47 pm
Forum: Beginner Basics
Topic: bypass redirect for one user
Replies: 2
Views: 580

Re: bypass redirect for one user

You'll need to set a MAC binding and set it to bypassed in /ip hotspot ip-binding
by TheWiFiGuy
Thu May 30, 2013 1:02 am
Forum: General
Topic: Hotspot Walled Garden https problem
Replies: 23
Views: 24033

Re: Hotspot Walled Garden https problem

You can post the URL in the walled-garden-ip - it accepts an IP or a Hostname.

If you add the hostname, the Mikrotik will go off and resolve all the associated IPs.
by TheWiFiGuy
Thu May 23, 2013 2:21 am
Forum: General
Topic: issue with hotspot in lastest versions of ros6rc and ros6
Replies: 6
Views: 981

Re: issue with hotspot in lastest versions of ros6rc and ros

Use a directory other than 'default' when creating the hotspot and it works (or just change and switch back).

Still, really needs sorting , has been evident in the last few versions.
by TheWiFiGuy
Wed May 22, 2013 9:13 am
Forum: General
Topic: VLAN Trunk Port
Replies: 9
Views: 3234

Re: VLAN Trunk Port

Use a Nomadix gateway, apparently they are 802.1q aware. :D
by TheWiFiGuy
Mon May 20, 2013 12:06 am
Forum: Scripting
Topic: Delete Queue based on Date in comment field
Replies: 2
Views: 851

Re: Delete Queue based on Date in comment field

Cheers Boen_Robot

THe queues are actually added with an API - and we write to a DB when we add the queue, so its a simple process to write a crontab to remove the queues - was just trying to simplify the process by removing an API call from the equation.
by TheWiFiGuy
Sun May 19, 2013 9:39 pm
Forum: Scripting
Topic: failover script
Replies: 3
Views: 1163

Re: failover script

he means, keep this in: # ------------------- header ------------------- # Script by Tomas Kirnak, version 1.0.7 # If you use this script, or edit and # re-use it, please keep the header intact. # # For more information and details about # this script please visit the wiki page at # http://wiki.mikr...
by TheWiFiGuy
Sun May 19, 2013 9:38 pm
Forum: Scripting
Topic: Delete Queue based on Date in comment field
Replies: 2
Views: 851

Delete Queue based on Date in comment field

Hi Every week we are required to bypass a few users in the hotspot , but as there is no rate limting on bypassed users, we create a queue, and place place that users mac i the queue. However, we quite often forget to remove the queue once its no longer needed. Im wondering if there is a way to set t...
by TheWiFiGuy
Fri May 17, 2013 2:49 pm
Forum: RouterBOARD hardware
Topic: Groove-5Hn, SXT, others --> Availability
Replies: 18
Views: 4016

Re: Groove-5Hn --> Availability

Tell us about it,

Were trying to order 360 Groove 2.4's - no stock anywhere from the UK and European providers we've chased.

Apparently they are waiting for the Groove 52's, but this lack of communication is a real pain.
by TheWiFiGuy
Wed May 15, 2013 10:34 pm
Forum: General
Topic: CPE Badge / Logo where to get them
Replies: 11
Views: 1582

Re: CPE Badge / Logo where to get them

We use vinyl stickers on all out external equipment. Any good printer should be able to offer a vinyl, external sticker on self adhesive backing.

This is who we used in the UK : http://www.harrisscreenprint.co.uk/
by TheWiFiGuy
Mon May 13, 2013 1:46 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12373

Re: Water Sxt

I would agree if you changed the product description "SXT is a low cost, high speed 2GHz outdoor wireless device". Maybe add: its not waterproof so its not really suitable for outdoor. Agreed: Why dont they just make a higher cost external, waterproof CPE device: I dont care if it costs more, I nev...
by TheWiFiGuy
Mon May 13, 2013 1:44 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12373

Re: Water Sxt

TheWiFiGuy , this device doesn't have an IPxx certificate, so it is not advertised as submersible. You can see that it does have holes, but if installed according to instructions, 99% of users don't have any problems with water. Just look one post above at what n21roadie said. If you have some spec...
by TheWiFiGuy
Mon May 13, 2013 1:34 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12373

Re: Water Sxt

Interesting that Mikrotik deny any problems, and then make design improvements in the very areas we've all been complaining about. Glad to see the changes, but agree the door still concerns me. For the record, I also saw problems in exactly the same place on the boards. According to this logic, eac...
by TheWiFiGuy
Sat May 11, 2013 4:39 pm
Forum: RouterBOARD hardware
Topic: Routerboard for Gigabit Enabled Access Point?
Replies: 2
Views: 966

Re: Routerboard for Gigabit Enabled Access Point?

What about using the RB751G with the new indoor stationbox InSpot, although it only has the one external antenna option. 600mw - 1000mw for indoor APs though a bit overkill - plan for capacity, not coverage!

http://www.rfelements.com/en/products/e ... ox-inspot/
by TheWiFiGuy
Fri May 10, 2013 7:28 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12373

Re: Water Sxt

Interesting that Mikrotik deny any problems, and then make design improvements in the very areas we've all been complaining about. Glad to see the changes, but agree the door still concerns me.

For the record, I also saw problems in exactly the same place on the boards.
by TheWiFiGuy
Thu May 02, 2013 8:39 pm
Forum: Wireless Networking
Topic: HotSpot [RESOLVED]
Replies: 3
Views: 943

Re: HotSpot [RESOLVED]

Nothing you can do there, thats expected behaviour.

Educate clients to browse to some other domain to bring up the browser.
by TheWiFiGuy
Thu May 02, 2013 10:08 am
Forum: Beginner Basics
Topic: With the Groove A-2Hn I can connect only one station
Replies: 2
Views: 1039

With the Groove A-2Hn I can connect only one station

Its in the wrong mode.

Should be in AP mode , not bridge. Check you also have the L4 license if you cant switch to AP
by TheWiFiGuy
Wed May 01, 2013 6:43 pm
Forum: General
Topic: Hotspot Walled Garden https problem
Replies: 23
Views: 24033

Re: Hotspot Walled Garden https problem

Try inserting the entry into [/ip hotspot walled-garden ip]under dst-host rather than directly into [/ip hotspot walled-garden]
by TheWiFiGuy
Tue Apr 30, 2013 6:17 pm
Forum: Wireless Networking
Topic: PPTP connection for hotspot users
Replies: 6
Views: 1143

Re: PPTP connection for hotspot users

Hotspot is a L2 service, you'll need to run a L2 protocol such as EOIP to have Hotspot working over PPTP.
by TheWiFiGuy
Thu Apr 25, 2013 11:47 pm
Forum: General
Topic: PPTP routing problem
Replies: 4
Views: 857

Re: PPTP routing problem

You dont have a route back to the Mikrotik from the Ubuntu machine do you?
by TheWiFiGuy
Thu Apr 25, 2013 11:33 pm
Forum: Wireless Networking
Topic: HotSpot [RESOLVED]
Replies: 3
Views: 943

Re: HotSpot

Sounds like the hotspot files havent been installed.

Check Files (/files from CLI) and make sure there's a hotspot directory, with lots of files in it.
by TheWiFiGuy
Wed Apr 24, 2013 1:00 am
Forum: General
Topic: Install a custom made encryption software
Replies: 2
Views: 485

Install a custom made encryption software

None.

You cant install 3rd party packages on routeros
by TheWiFiGuy
Mon Apr 22, 2013 3:53 pm
Forum: Beginner Basics
Topic: Everyone can see my webpage except me.
Replies: 11
Views: 1419

Re: Everyone can see my webpage except me.

Or just stick yourself in a queue with the same bandwidth settings as your ISP connection.
by TheWiFiGuy
Sun Apr 21, 2013 11:07 pm
Forum: General
Topic: Deployment Guideliness 400+ suscribers at tech conference
Replies: 4
Views: 853

Re: Deployment Guideliness 400+ suscribers at tech conferenc

There was some 3rd party testing of APs recently, Ubiquity UniFi broke down with the least number of clients first. A single Ruckus AP could actually handle that if you believe their specs, but a couple of Ruckus units if you want to do it well, or even 10 or so 751's running low power. Clearly, kee...
by TheWiFiGuy
Sun Apr 21, 2013 11:00 pm
Forum: Beginner Basics
Topic: DNS does not cache in 5.24
Replies: 9
Views: 1114

Re: DNS does not cache in 5.24

Have you told it to accept remote connections?

DNS Cache works fine in 5.24 - maybe you can post your setup config ?
by TheWiFiGuy
Sat Apr 20, 2013 11:41 pm
Forum: Wireless Networking
Topic: divide clients on 2 AP
Replies: 4
Views: 880

Re: divide clients on 2 AP

You set it on the AP in /wireless. Theres an access list and a connection list - connect list is for other APS, Access List for client devices and you can limit signal there.
by TheWiFiGuy
Thu Apr 18, 2013 12:15 pm
Forum: Beginner Basics
Topic: Everyone can see my webpage except me.
Replies: 11
Views: 1419

Re: Everyone can see my webpage except me.

Are you trying to access that URL from inside your network? If so, its a NAT loopback issue.

How is your internet provided, ADSL, Wireless etc?
by TheWiFiGuy
Mon Apr 15, 2013 1:28 pm
Forum: Wireless Networking
Topic: hotspot dosn't work on IP binding.
Replies: 1
Views: 931

Re: hotspot dosn't work on IP binding.

Hotspot user profile does not apply to IP bound users, they are bound and therefore exempt from the profile.

If you need to limit bound IP addresses, create a simple queue and limit them that way, not idea i know. I would like to see a upload/download limit for bound IP addresses
by TheWiFiGuy
Thu Mar 28, 2013 2:43 pm
Forum: Wireless Networking
Topic: Grooves connecting to wrong Channels
Replies: 2
Views: 496

Re: Grooves connecting to wrong Channels

All units are actually in AP-BRIDGE mode running static-WDS - Does the same rule apply?

Note: There is a single, shared SSID across all units.
by TheWiFiGuy
Thu Mar 28, 2013 11:14 am
Forum: Wireless Networking
Topic: Grooves connecting to wrong Channels
Replies: 2
Views: 496

Grooves connecting to wrong Channels

Hi Seen this a few times now, and cant work out how to resolve. Install 4 Grooves at a site , all on channel 2412 Install another 4 grooves at same site, in channel 2447 Some of the grooves on channel 2447 will actualy appear in the registration table of the 2412 AP-Bridge device, but with screwed u...
by TheWiFiGuy
Mon Mar 25, 2013 5:35 pm
Forum: General
Topic: IPASS / BOINGO
Replies: 0
Views: 905

IPASS / BOINGO

Hi All Im trying to set up Mikrotik to work with IPASS / BOINGO using the Smart Clients, but im not having much luck. I have this in my local mikrotik login.html file, and the 302 redirect to our hosted pages is working $(if http-status == 302)Hotspot login required$(endif) $(if http-header == "Loca...
by TheWiFiGuy
Wed Mar 20, 2013 6:38 pm
Forum: Beginner Basics
Topic: hotspot: bypass authentication for specific user
Replies: 7
Views: 11193

Re: hotspot: bypass authentication for specific user

Use MAC authentication via radius.
by TheWiFiGuy
Sat Mar 16, 2013 1:22 pm
Forum: General
Topic: DHCP/Hotspot question
Replies: 3
Views: 741

Re: DHCP/Hotspot question

why not allow 2 IPS per Mac Address?

We run 2 address-per-mac, plus allow a higher port-limit (concurrent user) - we find the resulting drop in support calls across the estate offsets any loss in revenue and also leaves clients happer that the system just works.
by TheWiFiGuy
Fri Mar 15, 2013 11:54 am
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 3235

Re: Roaming in 2AP diferent network

It's not so simple, if I go from one area to another client will not switch to better network if first is still exist, so voip client will disconnect the call It is so simple. WHat you are trying to achieve is seamless handoff - go get a Ruckus access point and WLAN controller. The client device is...
by TheWiFiGuy
Fri Mar 15, 2013 10:46 am
Forum: Wireless Networking
Topic: Roaming in 2AP diferent network
Replies: 12
Views: 3235

Re: Roaming in 2AP diferent network

Its simple.

Set up both APS. Set them on the same SSID, but on different non-overlapping channels. (2 and 8 for example)

Thats assuming you can feed them all from the same DHCP server.
by TheWiFiGuy
Thu Mar 14, 2013 5:07 pm
Forum: General
Topic: Verified By Visa and other Walled Garden Nightmares
Replies: 2
Views: 767

Verified By Visa and other Walled Garden Nightmares

Hi All How are you all handling the Verified By Visa and other payment verification systems? Ive had a few idea, but no concrete fix. I could Somehow use a L7 filter to add HTTPS:// requests from users I know are on my payment page Enable all SSL sites, and then block good ones in walled garden (Wil...
by TheWiFiGuy
Wed Mar 13, 2013 10:10 pm
Forum: Scripting
Topic: API - SNOOPER
Replies: 6
Views: 2316

Re: API - SNOOPER

@boen_robot : Thanks for the info. That is a real shame, command is totally pointless now and totally f***s up a business idea I was working on. It can clearly be accomplished, as Winbox has access to the data, so why hide it behind interactive commands. Mikrotik, please add this feature , and other...
by TheWiFiGuy
Wed Mar 13, 2013 6:47 pm
Forum: Scripting
Topic: API - SNOOPER
Replies: 6
Views: 2316

Re: API - SNOOPER

Ok, got that working, it times out after 10 seconds or so automatically.

However, it defaults to showing networks, and I need it to provide client stations. On the CLI you press 'S' whilst its running to get that display, any idea how you would do that via API?

Thanks
by TheWiFiGuy
Wed Mar 13, 2013 4:51 pm
Forum: Scripting
Topic: API - SNOOPER
Replies: 6
Views: 2316

Re: API - SNOOPER

Anyone ?

As snoop does not have a duration variable, i cant seem to make use of the API to read the results.

Has anyone ever got snoop working via API?
by TheWiFiGuy
Tue Mar 12, 2013 10:54 pm
Forum: General
Topic: 951G Simple Router Config Issues
Replies: 2
Views: 698

Re: 951G Simple Router Config Issues

It sounds like you either dont have a route or nat rule setup. Web proxy doesn't proxy HTTPS , so its falling back to the default route / nat which doesn't work (hence why you enabled web proxy)

Can you post your config?
by TheWiFiGuy
Tue Mar 12, 2013 10:51 pm
Forum: General
Topic: Hotspot redirect does not work when initiating a "HTTPS" URL
Replies: 7
Views: 5328

Re: Hotspot redirect does not work when initiating a "HTTPS"

Not really, no. If you intercepted the HTTPS response, the users browser would throw up SSL error messages which really scare the users off. IPhones and some newer versions of Android have captive portal helpers which provide a solution, as does Windows 8 and OSX later version , but its still a real...
by TheWiFiGuy
Fri Mar 01, 2013 12:09 pm
Forum: Scripting
Topic: API - SNOOPER
Replies: 6
Views: 2316

API - SNOOPER

Hi All

Im trying to use the Snooper functionality to see MAC addresses of clients (like you see if you snoop in Winbox)

However, the API or Command Line only appears to show each channel, not the devices on each channel. Any idea how to print the actional stations?
by TheWiFiGuy
Fri Mar 01, 2013 11:31 am
Forum: General
Topic: hotspot bypass user + QoS
Replies: 1
Views: 589

Re: hotspot bypass user + QoS

It is a problem isnt it - Feature request: bandwidth limiting on bypassed users like there is for eth ports etc.

Create a queue, stick that user in it.
by TheWiFiGuy
Tue Feb 26, 2013 8:28 pm
Forum: General
Topic: Commercial Traffic Shaping script
Replies: 4
Views: 988

Re: Commercial Traffic Shaping script

Thats the puppy, thank you.
by TheWiFiGuy
Mon Feb 25, 2013 10:06 pm
Forum: General
Topic: Commercial Traffic Shaping script
Replies: 4
Views: 988

Commercial Traffic Shaping script

Hi All

Ive read somewhere about a commercial (paid) traffic shaping script written by a Mikrotik trainer - but never managed to work out who. I really need a ready to go (tested) script to save a bit of time. Does anyone know who it may be?

Cheers
by TheWiFiGuy
Mon Feb 25, 2013 9:00 pm
Forum: Wireless Networking
Topic: Mikrotik Wireless Controller
Replies: 54
Views: 17180

Re: Mikrotik Wireless Controller

As would we! I was very disheartened to download 6.12 pre-release and find it not in there after my email from Sergejs it will work on any licensed RouterOS, follow documentation for the new features. Regards, Sergejs I suppose I should of checked first before wooping round the office that its launc...
by TheWiFiGuy
Mon Feb 25, 2013 1:14 pm
Forum: Wireless Networking
Topic: hotspots with 2 radius how to config pls ?
Replies: 14
Views: 2514

Re: hotspots with 2 radius how to config pls ?

Same solution...

Append a domain name onto the entered vouchercode before posting using javascript.
by TheWiFiGuy
Sun Feb 24, 2013 10:29 pm
Forum: Beginner Basics
Topic: rb2011 - poor performance with uk bt infinity
Replies: 42
Views: 14904

Re: rb2011 - poor performance with uk bt infinity

You wont normally get an official responce from Mikrotik in these forums as they are user forums - may be work emailing support@mikrotik.com if you beleive the error is with the Mikrotik (highly probable!)
by TheWiFiGuy
Sun Feb 24, 2013 10:17 pm
Forum: Wireless Networking
Topic: Virtual AP (VAP) - help Setup
Replies: 5
Views: 1933

Re: Virtual AP (VAP) - help Setup

Have you set correct masquerade rules?

Can you paste your config, as its pretty hard to guess where your going wrong without seeing exactly what you have done.
by TheWiFiGuy
Sun Feb 24, 2013 5:19 pm
Forum: Wireless Networking
Topic: SXT questions
Replies: 7
Views: 1635

Re: SXT questions

And we have tested around 100 in the UK and have had around 10% fail rate due to water ingress - only the ones we silicone extensively survived. In my view, (we have around 2,000 Mikrotik radios in the field) use a different solution: Maybe the OmniTIK as distances are not that great, or a 5ghz exte...
by TheWiFiGuy
Sat Feb 23, 2013 12:19 pm
Forum: General
Topic: Accounting software that integrates with Hotspot
Replies: 2
Views: 1251

Re: Accounting software that integrates with Hotspot

If you wanted to build your own solution, then Kashflow is a web based accounts package with an excellent API that allows you to raise invoices and send them via API.
by TheWiFiGuy
Thu Feb 21, 2013 6:02 pm
Forum: Wireless Networking
Topic: Mikrotik Wireless Controller
Replies: 54
Views: 17180

Re: Mikrotik Wireless Controller

Had to stop a little bit of man wee then.

Wow, where did this come from? Anyone have any ideas when this will be available?
by TheWiFiGuy
Thu Feb 21, 2013 12:09 am
Forum: General
Topic: AAA with Mikrotik - local user database and Windows 2008 AD
Replies: 7
Views: 3225

Re: AAA with Mikrotik - local user database and Windows 2008

as dtoffo says:

Freeradius can be set up to authenticate/proxy requests against an Active Directory server.
by TheWiFiGuy
Thu Feb 21, 2013 12:01 am
Forum: Scripting
Topic: find command
Replies: 3
Views: 1308

Re: find command

Worked a treat - thank you.
by TheWiFiGuy
Wed Feb 20, 2013 6:14 pm
Forum: Scripting
Topic: find command
Replies: 3
Views: 1308

find command

Hi All

Trying to use a wildcard on find such as:
:put [/ip hotspot ip-binding find comment=check*] 
I need to find out any items with the word check in the comment field (check_1) for example

Can it be done? Thanks
by TheWiFiGuy
Fri Feb 15, 2013 12:45 am
Forum: Scripting
Topic: Please Help...HTTP Request (With QueryString)
Replies: 3
Views: 1338

Re: Please Help...HTTP Request (With QueryString)

It does work, you may need to use a php file on the remote server to act as a proxy. I have /tool fetch sending commands to our dashboard via a php file , maybe you could modify this approach? example: /tool fetch urtl=http://www.server.com/msg.php?command=test php: <?PHP $command=$_GET['command']; ...
by TheWiFiGuy
Wed Feb 13, 2013 1:30 pm
Forum: General
Topic: Default behaviour: visibility between hotspot clients.
Replies: 3
Views: 749

Re: Default behaviour: visibility between hotspot clients.

How is your infrastructure set up? Are the any switches in between the clients and hotspot gateway?
by TheWiFiGuy
Tue Feb 12, 2013 10:09 pm
Forum: Scripting
Topic: Please Help...HTTP Request (With QueryString)
Replies: 3
Views: 1338

Re: Please Help...HTTP Request (With QueryString)

what about
 /tool fetch url=
paste the full command, and the mikrotik will attempt to connect to that url, passing the in the parameters you supply.
by TheWiFiGuy
Tue Feb 12, 2013 9:57 pm
Forum: Wireless Networking
Topic: Hotspot issues with Skype and torrents
Replies: 1
Views: 823

Re: Hotspot issues with Skype and torrents

Its a configuration problem, can you post your configs ?

Im guessing one of more of the APS are not in transparent mode, so once one user is authenticated , its authenticating the mac address of a wireless node and then passing all traffic from that point.
by TheWiFiGuy
Tue Feb 12, 2013 9:54 pm
Forum: Wireless Networking
Topic: WDS Mesh performing poorly
Replies: 8
Views: 3814

Re: WDS Mesh performing poorly

Thanks Uldis, will give the manual wds cost a go.
by TheWiFiGuy
Sat Feb 09, 2013 6:43 pm
Forum: Wireless Networking
Topic: WDS Mesh performing poorly
Replies: 8
Views: 3814

Re: WDS Mesh performing poorly

HWMP+ Mesh does not work properly, Static WDS is the best way, as soon as you use dynamic WDS or WDS MESH or HWMP+ all sorts of bridge loops occur. WDS was supposedly fixed in 5.18 , but not HWMP+ , when I rasied a ticket I was told it 'may get fixed' but no change logs show .
by TheWiFiGuy
Mon Feb 04, 2013 1:32 am
Forum: General
Topic: Automatically send RADIUS request
Replies: 1
Views: 347

Automatically send RADIUS request

Anyone would think you had a CCR turning up tomorrow :)
by TheWiFiGuy
Mon Feb 04, 2013 1:30 am
Forum: General
Topic: use Microtik as print server as well
Replies: 42
Views: 22489

use Microtik as print server as well

With regards to removing wireless, hell yes. The most reliabe routerboards are those without embedded wireless. Our 1100 and 1200s, rb450 etc all have much longer uptimes and less issues than those with wireless. You make no sense at all! Mikrotik is a WISP product provider. Their biggest customer ...
by TheWiFiGuy
Sun Feb 03, 2013 1:06 pm
Forum: General
Topic: use Microtik as print server as well
Replies: 42
Views: 22489

use Microtik as print server as well

Printing is not a routing feature. Smb is not a routing feature. Hotspot is. These are routers after all. Drop usermanager, theres 3rd party tools for that in free radius. Stop packing the mikrotiks full of other home router crap, if you want that , get a tp link. If there were less frivolent featur...
by TheWiFiGuy
Sun Feb 03, 2013 1:03 pm
Forum: General
Topic: HOTSPOT configuring on RB750, MYHOTSPOT page not found
Replies: 2
Views: 744

HOTSPOT configuring on RB750, MYHOTSPOT page not found

You need the internal mikrotik dns to be working (with internet access). If not, create a catch all static dns entry on the Tik using a regexp.

Pasting your hotspot settings if you want usefull advice not just guessess.
by TheWiFiGuy
Sun Feb 03, 2013 12:53 pm
Forum: RouterBOARD hardware
Topic: CLOUD CORE ROUTER
Replies: 1374
Views: 1015815

CLOUD CORE ROUTER

Just paste that line in cli and see which item goes red - something will not be recognized nd you can ammend the script.
by TheWiFiGuy
Sat Feb 02, 2013 10:40 pm
Forum: General
Topic: use Microtik as print server as well
Replies: 42
Views: 22489

use Microtik as print server as well

-1 from me.

Its bad enough that we have smb in a router, let alome print sharing. Strip out all the crap and get ROS back to a lean mean routing machine!
by TheWiFiGuy
Wed Jan 30, 2013 10:54 pm
Forum: General
Topic: Customers By-pass hotspot logging page
Replies: 3
Views: 800

Re: Customers By-pass hotspot logging page

Your network is not correctly configured, using the web proxy is not possible unless authenticated when using hotspot.

Can you please post configs?
by TheWiFiGuy
Wed Jan 30, 2013 10:51 pm
Forum: General
Topic: Hotspot Scale...
Replies: 14
Views: 1613

Re: Hotspot Scale...

How many concurrent logins?
by TheWiFiGuy
Wed Jan 30, 2013 8:32 pm
Forum: General
Topic: Mikrotik and Radius - Nas-Port / Nas-Port-ID
Replies: 1
Views: 928

Mikrotik and Radius - Nas-Port / Nas-Port-ID

Hi All Can anyone with Freeradius help with this? I have an estate of both Nomadix and Mikrotik. We're gradually switching to Mikrotik, but have a problem with different formats of radius accounting. Nomadix passes the interface VLAN in Nas-Port Mikrotik Passes the VLAN in Nas-Port-ID, and a random ...
by TheWiFiGuy
Tue Jan 29, 2013 10:37 pm
Forum: Scripting
Topic: Reading/Writing Encrypted Scripts
Replies: 19
Views: 6654

Re: Reading/Writing Encrypted Scripts

+1 for this

We have many scripts that we've spent many hundreds of hours developing and need to protect .
by TheWiFiGuy
Mon Jan 28, 2013 8:59 pm
Forum: RouterBOARD hardware
Topic: Water Sxt
Replies: 74
Views: 12373

Re: Water Sxt

Ive also posted threads about this, there clearly is a problem, but no one admits it. We were lucky enough to be able to switch the SXT's out with OmniTIKS and have send the SXT back to our distributor as not fit for purpose. Had hundreds of Engenious units in the field and never a problem, but fail...
by TheWiFiGuy
Sun Jan 20, 2013 6:19 pm
Forum: The User Manager
Topic: UserManager - Hotspot binding client to AP's MAC address
Replies: 6
Views: 9021

UserManager - Hotspot binding client to AP's MAC address

Sounds more like the aps are not in transparrent mode.
by TheWiFiGuy
Sat Jan 19, 2013 4:06 pm
Forum: Scripting
Topic: mikrotik + Opera PMS Paying for who can help
Replies: 4
Views: 2107

Re: mikrotik + Opera PMS Paying for who can help

Most PMS use a standard Micros FIAS interface. Even getting the API documents from Micros is circa $8000 , and then you need to have the application certified and signed off by Micros. Unless you are prepared to spend big $$$ this is not going to happen. Even Radiator is not certified by Micros ( it...
by TheWiFiGuy
Sat Jan 19, 2013 4:03 pm
Forum: General
Topic: Logging a hotspot user on manually
Replies: 4
Views: 824

Re: Logging a hotspot user on manually

Hello! It's quite simple. Modify your ip/hotspot/server and mark MAC autentication. I think you have chap or cookies or something like that. ADD MAC autentication with the V Then you'll be able to add a "normal" user with a profile asignated. This user is name=00:0C....... and password="nothing" pr...
by TheWiFiGuy
Sat Jan 19, 2013 4:02 pm
Forum: General
Topic: Logging a hotspot user on manually
Replies: 4
Views: 824

Re: Logging a hotspot user on manually

Hello! It's quite simple. Modify your ip/hotspot/server and mark MAC autentication. I think you have chap or cookies or something like that. ADD MAC autentication with the V Then you'll be able to add a "normal" user with a profile asignated. This user is name=00:0C....... and password="nothing" pr...
by TheWiFiGuy
Wed Jan 16, 2013 11:33 pm
Forum: Wireless Networking
Topic: Water Damaged SXT's
Replies: 4
Views: 1056

Re: Water Damaged SXT's

Thanks Guys But I assure you they are not as waterproof as they should be. We have Mikrotik equipment at approx 200 external sites, with maybe between 10-40 units per site (2000-4000 units) in the field. Only a couple of the SXTs have failed, and these were all purchased at the same time. Possibly a...
by TheWiFiGuy
Tue Jan 15, 2013 7:45 pm
Forum: Scripting
Topic: Packet Marking based on Ip-Binding Comment field
Replies: 0
Views: 446

Packet Marking based on Ip-Binding Comment field

Hi All Not so much a direct scripting question, but Im sure scripting can solve my problem. I have a few mac addresses bypassed in /ip hotspot ip-binding and they all have the comment 'bypassed' I need to find a way to assign those bypassed mac addresses to a simple queue to stop them having unlimit...
by TheWiFiGuy
Tue Jan 15, 2013 5:24 pm
Forum: RouterBOARD hardware
Topic: 450G update CPU+RAM+Solid Capicitors
Replies: 6
Views: 2313

Re: 450G update CPU+RAM+Solid Capicitors

Hi,

I too would like to see an upgraded version of the 450 or such - Whilst the new 951 looks great, its still badged and sold as SOHO equipment which is not the impression we wish to give our customers.
by TheWiFiGuy
Sun Jan 13, 2013 9:25 pm
Forum: Wireless Networking
Topic: Water Damaged SXT's
Replies: 4
Views: 1056

Water Damaged SXT's

Back in August we installed 31 SXT units. In december - January, 5 have failed (wireless stopped working). Ive sent replacement units to site, and now have the failed units back. They ALL have signs of water ingress, despite being installed as per specification. All covers clipped back into place. F...
by TheWiFiGuy
Sun Jan 13, 2013 2:33 pm
Forum: General
Topic: Logging a hotspot user on manually
Replies: 4
Views: 824

Logging a hotspot user on manually

Hi All We currently use a lot of Nomadix equipment, and one of the features we use on our 24/7 helpdesk is to log a user on manually if they are having problems. What we basically do, is send the Nomadix device the MAC/IP and the username/password and it logs the user on. Means users that are unable...
by TheWiFiGuy
Sun Jan 13, 2013 12:35 pm
Forum: General
Topic: how to bloc users intercommunication
Replies: 4
Views: 1182

how to bloc users intercommunication

Yes it is possible, but only depending on your setup. If you are using wiresless, set client isolation (disable default forwarding on mikrotik wireless). If you are using the inbuilt mikrotik ethernet ports, use bridge horizons or firewall rules. If you are expanond the wired network, use managed L2...
by TheWiFiGuy
Sun Jan 13, 2013 12:32 pm
Forum: General
Topic: Hotspot Redirect Problems with Macbook Pro and Windows 7
Replies: 19
Views: 12677

Hotspot Redirect Problems with Macbook Pro and Windows 7

I kinda solve it ( i mean, i didn't see it in a few months now) what was changed: - added hotspot name (users auth at hotspot.local) - hotspot radius - cookies synchronized (1d hotspot/dhcp) .local is a reserved dns domain by the apple os and should not be used if you expect apple devices to work a...
by TheWiFiGuy
Tue Jan 08, 2013 3:56 pm
Forum: General
Topic: how to bloc users intercommunication
Replies: 4
Views: 1182

Re: how to bloc users intercommunication

Two options:

Create a firewall rule to drop all traffic not routed to gateway ip address or 0.0.0.0 (make sure bridge firewall is on)

Add Ethernet ports to bridge (not switch slave) and assign bridge Horizon all the same.
by TheWiFiGuy
Fri Jan 04, 2013 2:11 pm
Forum: Scripting
Topic: How to Block utorrent!!
Replies: 8
Views: 6669

Re: How to Block utorrent!!

Ditto!

If anyone can point me in the right direction to the fabled script it would be great. I would rather not spend time developing and testing a solution if one can be purchased for a reasonable fee.
by TheWiFiGuy
Fri Dec 28, 2012 9:11 pm
Forum: General
Topic: XBOX 360 group connection issues
Replies: 13
Views: 2705

Re: XBOX 360 group connection issues

No real answer for you, but I have 3 Xbox 360 in our house and have the same problem. Two of them will always be on moderate NAT and we can never play black ops together (for long). It must be a NAT issue, and a quick google throws up lots of solutions - but none ever worked for me.
by TheWiFiGuy
Fri Dec 21, 2012 12:45 pm
Forum: General
Topic: Hotspot Login
Replies: 3
Views: 764

Re: Hotspot Login

Set a long idle-timeout and session-timeout.
by TheWiFiGuy
Thu Dec 20, 2012 5:45 pm
Forum: General
Topic: Limit speed to facebook.com for unauth hotspot users
Replies: 1
Views: 1133

Limit speed to facebook.com for unauth hotspot users

Hi

Were building facebook login to our Hotspot, so need to have facebook.com in the walled garden.

I'd like to limit speed to the facebook.com domains though for users that have not logged in yet,whats the best option to achieve this?

thanks
by TheWiFiGuy
Mon Dec 17, 2012 8:42 am
Forum: RouterBOARD hardware
Topic: How to force DNS requests using tcp protocol!
Replies: 7
Views: 2573

How to force DNS requests using tcp protocol!

Is your isp not doing a nat redirect to force you to use theirs despite your settongs?
by TheWiFiGuy
Sat Dec 15, 2012 2:55 pm
Forum: Wireless Networking
Topic: Need help for this scenario (wireless roaming)
Replies: 3
Views: 1337

Need help for this scenario (wireless roaming)

This has been covered many times. It all depends on your requirements If you can wire each ap to a central switch, simply set the ssid the same on all devices, but change the channels so that neighboring aps are at least 5 channels apart. Your device will switch aps as you move around the building. ...
by TheWiFiGuy
Thu Nov 29, 2012 11:23 am
Forum: Wireless Networking
Topic: Wall Jack APs
Replies: 18
Views: 3544

Re: Wall Jack APs

Agreed! And what wireless issues have you been having with Mikrotik? If you know how to configure them properly, they are some of the most reliable access points you can buy. Of course! I must of assumed the 2,000+ Mikrotik radio's we've installed, combined with our complete lack of knowledge of Mi...
by TheWiFiGuy
Sat Nov 24, 2012 11:39 am
Forum: General
Topic: Data Retention Directive
Replies: 6
Views: 1546

Data Retention Directive

Ccsdias : just google wifi laws , pick a wifi provider from list and youll see all the laws you need to contend with.
by TheWiFiGuy
Sat Nov 24, 2012 1:36 am
Forum: General
Topic: Data Retention Directive
Replies: 6
Views: 1546

Data Retention Directive

Theres more laws than that to contend with, and if you think storing that data on a server in your office is the way to go you may be in for a shock. Sorry, cant help you with this one - conflict of interest.
by TheWiFiGuy
Thu Nov 22, 2012 9:42 am
Forum: Scripting
Topic: Find strongest signal from all connected clients
Replies: 2
Views: 864

Find strongest signal from all connected clients

Thanls, worked a treat.
by TheWiFiGuy
Wed Nov 21, 2012 1:01 am
Forum: Scripting
Topic: Find strongest signal from all connected clients
Replies: 2
Views: 864

Find strongest signal from all connected clients

Hi All

Im looking for advice on the best way to achieve my goal.

I want to enumerate the /int wireless registration-table to find the strongest signal-strength.

Can anyone advise the most efficient way to achieve this?
by TheWiFiGuy
Mon Nov 19, 2012 9:26 pm
Forum: General
Topic: PCC - Question on per-connection-classifier=both-addresses
Replies: 2
Views: 1722

Re: PCC - Question on per-connection-classifier=both-address

Many thanks for taking the time to explain.
by TheWiFiGuy
Mon Nov 19, 2012 2:51 pm
Forum: General
Topic: PCC - Question on per-connection-classifier=both-addresses
Replies: 2
Views: 1722

PCC - Question on per-connection-classifier=both-addresses

Hi I have a question regarding per-connection-classifier=both-addresses: If I am spreading load over 2 Lines I would expect to see something like the below. add chain=prerouting in-interface=LAN connection-mark=no-mark dst-address-type=!local \ per-connection-classifier=both-addresses:2/0 action=mar...
by TheWiFiGuy
Sun Nov 18, 2012 4:37 pm
Forum: General
Topic: how to send ads to users infected with pseudo-random domain
Replies: 2
Views: 673

how to send ads to users infected with pseudo-random domain

Just set up a redirect on the web proxy to a page on one of your servers
by TheWiFiGuy
Sat Nov 17, 2012 10:21 am
Forum: Wireless Networking
Topic: Wall Jack APs
Replies: 18
Views: 3544

Re: Wall Jack APs

We use the Ruckus faceplate AP's. Brilliant bits of kit. Surely Mikrotik can make a product like this based on the 751/951 platform. It just needs an internal ether1/PoE jack, or some other way to route a cable around to the front of the board, and a backing plate that fastens to a standard wall pl...
by TheWiFiGuy
Thu Nov 15, 2012 11:34 pm
Forum: Wireless Networking
Topic: Wall Jack APs
Replies: 18
Views: 3544

Re: Wall Jack APs

We use the Ruckus faceplate AP's. Brilliant bits of kit.
by TheWiFiGuy
Thu Nov 15, 2012 11:30 pm
Forum: Wireless Networking
Topic: Mikrotik band steering
Replies: 5
Views: 3232

Re: Mikrotik band steering

Yes, it doesn't.
by TheWiFiGuy
Thu Nov 15, 2012 1:35 am
Forum: General
Topic: MUM 2013 - The British Contingent
Replies: 15
Views: 3509

MUM 2013 - The British Contingent

Ill be there!
by TheWiFiGuy
Wed Nov 14, 2012 3:51 pm
Forum: General
Topic: Hotspot variable - interface-name
Replies: 0
Views: 361

Hotspot variable - interface-name

Hi I need to pass the interface that a hotspot customer comes in from, which should be achieved with interface-name. However, this simply returns the name of the bridge that the port is in, not the port name. As an example. lets say I have VLAN101,VLAN102,VLAN103 in a bridge. When they get directed ...
by TheWiFiGuy
Mon Nov 12, 2012 12:15 am
Forum: General
Topic: Mixed firewall and proxy log
Replies: 0
Views: 360

Mixed firewall and proxy log

Hi all I would like to use the web proxy to log NEW connections to a domain to cut down all the surpluss logging. I can log new ip connections and log ip etc, but is it possible to combine the new ip connections but log the domain from the web proxy? If not, it would be a cool feature to implement i...
by TheWiFiGuy
Mon Nov 12, 2012 12:15 am
Forum: General
Topic: Mixed firewall and proxy log
Replies: 0
Views: 286

Mixed firewall and proxy log

Hi all I would like to use the web proxy to log NEW connections to a domain to cut down all the surpluss logging. I can log new ip connections and log ip etc, but is it possible to combine the new ip connections but log the domain from the web proxy? If not, it would be a cool feature to implement i...
by TheWiFiGuy
Sat Nov 10, 2012 7:21 pm
Forum: Wireless Networking
Topic: rb2011uas-2hnd-in access point problem
Replies: 14
Views: 4240

Re: rb2011uas-2hnd-in access point problem

No particular problem, but lets face it, WDS Mesh and HWMP Mesh all suffer from various Loop issues (some not fixed in 5.18) so its always good to have all the ideas to optimise a wireless network for best results.

Thanks for taking the time to reply.
by TheWiFiGuy
Sat Nov 10, 2012 11:48 am
Forum: Wireless Networking
Topic: rb2011uas-2hnd-in access point problem
Replies: 14
Views: 4240

rb2011uas-2hnd-in access point problem

Hey Uldis

I assume you are refering to an email sent to the OP but could you share the recomendation so we can all try?
by TheWiFiGuy
Thu Nov 08, 2012 10:08 pm
Forum: General
Topic: Hotspot not redirecting https traffic
Replies: 2
Views: 794

Hotspot not redirecting https traffic

If you mean its not forcing the portal page to load, thats correct and expected behavior.
by TheWiFiGuy
Mon Nov 05, 2012 4:36 pm
Forum: Wireless Networking
Topic: Problems with mesh-interface and topology change
Replies: 2
Views: 857

Re: Problems with mesh-interface and topology change

Mesh is still broken and does not have the wds loop fix that were introduced to bridging in the 5.18 fix - or so I was told when I questioned this with support. They 'may' get around to fixing it.

Your simply getting a L2 loop which floods the network until it finally sorts itself out.
by TheWiFiGuy
Wed Oct 31, 2012 4:02 am
Forum: General
Topic: Mikrotik 1200 - Net Prohibited Issue ???
Replies: 9
Views: 4917

Mikrotik 1200 - Net Prohibited Issue ???

Add the repeaters ip address to /ip hotspot ip-binding as bypassed
by TheWiFiGuy
Tue Oct 23, 2012 1:57 am
Forum: General
Topic: Interface rate limiting while on bridge
Replies: 2
Views: 1258

Interface rate limiting while on bridge

Cant you just set the limit direct on theethernet port usising the bandwidth option in /interface ethernet ?
by TheWiFiGuy
Tue Oct 23, 2012 1:53 am
Forum: General
Topic: Block traffic between vlans in bridge
Replies: 2
Views: 719

Block traffic between vlans in bridge

You could set the horizon on the bridge for those two ports. Setting them both to the same value will stop traffic passing between them
by TheWiFiGuy
Thu Oct 11, 2012 1:41 am
Forum: RouterBOARD hardware
Topic: RB751U-2HnD does not work properly with hotspot
Replies: 3
Views: 755

RB751U-2HnD does not work properly with hotspot

Ive not seen this, and we have in excess of 1000 751s in the field. Can you replicate the issue every time?
by TheWiFiGuy
Wed Oct 03, 2012 8:27 pm
Forum: General
Topic: hotspot spash page issue when offline from net
Replies: 3
Views: 538

hotspot spash page issue when offline from net

Its because dns is no longer working. Create a catch all static dns entry using regex when the net is down and remove it when its back online using scripting.
by TheWiFiGuy
Fri Sep 28, 2012 10:41 pm
Forum: RouterBOARD hardware
Topic: RB 751 - is it really 2x2 MIMO?
Replies: 5
Views: 1899

RB 751 - is it really 2x2 MIMO?

I get 280mb on 40mhz so yes, its 2x2 mimo. Is your client device?
by TheWiFiGuy
Wed Sep 19, 2012 9:02 pm
Forum: General
Topic: Captive portal allowing ssl sites
Replies: 0
Views: 1062

Captive portal allowing ssl sites

Hi guys Im having problems using the walled garden in /ip hotspot to allow ssl sites I need to add the following ssl sites www.facebook.com/dialog Www.facebook.com/login.php However, when i try to access them i get an ssl error - connection reset which has been posted about before by me and others. ...
by TheWiFiGuy
Mon Aug 13, 2012 8:47 pm
Forum: General
Topic: Active user and its mac is not showing on Hotspot page
Replies: 4
Views: 803

Re: Active user and its mac is not showing on Hotspot page

The Linksys is not passing through the correct clients MAC address, its using the routers mac address.

Once the first user is authenticated (using the linksys mac) all subsequent users are passing straight through as they are presenting the same mac. Reconfigure the Linksys .
by TheWiFiGuy
Wed Aug 08, 2012 5:45 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

Thanks Peson Does that mean that we have to disable frame aggregation, or that it simply isn't used. I'll have a play around when I next have access to some test kit. I would of used NV2 over 802.11 , however, links don't seem to stay up that long compared to 802.11 even with clear LOS and good sig...
by TheWiFiGuy
Wed Aug 08, 2012 5:42 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

I have been using station bridge and Nv2 and wireless N. and PtMP and get superb through put at all sites. no latency problems no disconnects.radios stay up like forever unitl we do not reboot them. I was using 802.11, station-wds and N and it goes crazy , but settles down on 5Ghz-A. Whilst this ha...
by TheWiFiGuy
Wed Aug 08, 2012 2:31 pm
Forum: General
Topic: Freeradius/mysql multiple sessions for a 'demo' user.
Replies: 4
Views: 2577

Re: Freeradius/mysql multiple sessions for a 'demo' user.

The radius attribute on the Mikrotik for Simultaneous-Users is actually Port-Limit

Set a port limit reply in the radreply (not radcheck) and it will set the mikrotik correctly.
by TheWiFiGuy
Tue Aug 07, 2012 8:54 am
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

Thanks Peson Does that mean that we have to disable frame aggregation, or that it simply isn't used. I'll have a play around when I next have access to some test kit. I would of used NV2 over 802.11 , however, links don't seem to stay up that long compared to 802.11 even with clear LOS and good sign...
by TheWiFiGuy
Mon Aug 06, 2012 12:40 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

I disagree. If he needs layer 2 transparency station WDS works better than station pseudobridge. Thank you. Station-Bridge is recommended for those instances where station-wds does not fit. In my case , it fits. I am using 20mhz only. Its working perfectly in 5GHZ-A now, so will leave it alone as b...
by TheWiFiGuy
Sat Aug 04, 2012 10:42 pm
Forum: Wireless Networking
Topic: Question about Hotspot 120.000 account @ 200 concurrent user
Replies: 14
Views: 6408

Re: Question about Hotspot 120.000 account @ 200 concurrent

Thank you for the quick reply :) Same SSID different channel? Have you tried to build it with Mesh? I'm thinking about going this way. I don't know yet, whether we will use as well as 5G or just 2,4 for the clients. Steve. The controller is the least of your worries. We do some very large events, a...
by TheWiFiGuy
Sat Aug 04, 2012 10:35 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

Theres no issue with the network design, all clients are pulling the required 10MB , with pings across the network no more than 0.7ms. Hotspot requires a L2 transparent bridge, which is how its set up. It needs to be a central hotspot as were providing auth for the smart tvs and apple tvs, as well a...
by TheWiFiGuy
Fri Aug 03, 2012 10:17 pm
Forum: Wireless Networking
Topic: low speed - WDS not the root cause
Replies: 2
Views: 1335

Re: low speed - WDS not the root cause

Looks right to me.

Im installing a network of 23 x SXTs at the moment, and can easily pull 20MB per unit and then run out of bandwidth to the internet. Local bandwidth to a server on the same network runs into the 100+ MB. Out of

Can you post your full

/Interface wiress
by TheWiFiGuy
Fri Aug 03, 2012 9:36 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

Re: WDS and N

Thanks Oldman.

That thread is regarding WDS routing loops and was fixed in 5.18RC1. Im not using WDS repeating mode, which introduced those loops, simply station-wds to create 1 transparent L2 network.

Using 5.19 as well. This seems to be more a N/WDS issue
by TheWiFiGuy
Fri Aug 03, 2012 8:18 pm
Forum: Wireless Networking
Topic: WDS and N
Replies: 20
Views: 2630

WDS and N

Hi All Ive been pulling my hair out on a simply install, that was just not playing ball. So far : 23 SXT connected to 3 Access Points. SXT are running in station-wds mode and everthing was set to N only. Not using NV2 Every so often, pings would go crazy, radios freeze up. Ping would be 28000MS and ...
by TheWiFiGuy
Thu Aug 02, 2012 2:53 am
Forum: Wireless Networking
Topic: Bridge Filter on SXT to drop local traffic
Replies: 3
Views: 797

Re: Bridge Filter on SXT to drop local traffic

Im not looking to disable bridging. There's a pesky Apple TV in each lodge, connected to an RB751 in the lodge. Idea is that a holiday maker connects to the RB751 and can send stuff to the Apple TV to watch on the main TV. Problem is , its showing all Apple TVs on the network so im trying to block t...
by TheWiFiGuy
Wed Aug 01, 2012 4:45 pm
Forum: Wireless Networking
Topic: Bridge Filter on SXT to drop local traffic
Replies: 3
Views: 797

Bridge Filter on SXT to drop local traffic

Hi All Im running a L2 bridged Hotspot network at a site. Its a small site with 23 holiday lodges. Each lodge has an SXT outside, feeding an RB751 internally. Theres an APPLE TV also connected to the RB751. The SXT is connected in Station-wds mode to one of 3 access points using a connection list. I...
by TheWiFiGuy
Thu Jul 26, 2012 11:10 am
Forum: General
Topic: Wireless connection droppping on RB951-2n
Replies: 24
Views: 6952

Re: Wireless connection droppping on RB951-2n

Although 5.18 fixed the major WDS loop issue, im still having problems with WPA2 WDS links, and now with Virtual APS. I posted about the strange results a few days back, in my mind, Virtual APS are also broken, I hope we have a better response from Mikrotik though: When I contacted them to ask if th...
by TheWiFiGuy
Wed Jul 25, 2012 3:28 pm
Forum: Wireless Networking
Topic: Groove A-2Hn sufficient for my needs?
Replies: 4
Views: 862

Re: Groove A-2Hn sufficient for my needs?

Thats a good antenna, its what we use.

Are you looking to get signal into the buildings? If so, just ensure that there is no foil backed plasterboard, foil insulation or K-Glass.
by TheWiFiGuy
Wed Jul 25, 2012 3:21 pm
Forum: Wireless Networking
Topic: Problem with WDS and Virtual APS
Replies: 2
Views: 566

Re: Problem with WDS and Virtual APS

Yes, bridge is set with RSTP

Wiped the lot and just set up a single SSID with WDS and it works fine.

Seems to be a looping problem when bridging two VAPs and running WDS on one of them.
by TheWiFiGuy
Wed Jul 25, 2012 12:15 am
Forum: Wireless Networking
Topic: Problem with WDS and Virtual APS
Replies: 2
Views: 566

Problem with WDS and Virtual APS

Hi All Im running into a problem Ive never seen before, and could do with some advice. I have 5 x Grooves set up as follows: WLAN: Chanel, Frequency all set. No SSID. No Forwarding. No Authentication. APBRIDGE mode. Virtual AP1: SSID: LINK WDS Mode: Dynamic. Hidden SSID Virtual AP2: SSID: Clients. N...
by TheWiFiGuy
Mon Jul 23, 2012 6:26 pm
Forum: Wireless Networking
Topic: Hotspot bypass problems
Replies: 7
Views: 3016

Re: Hotspot bypass problems

Yes, it fixed the broadcast storm issue.
by TheWiFiGuy
Sun Jul 22, 2012 12:07 am
Forum: General
Topic: How to make hotspot active when internet connection is down?
Replies: 4
Views: 903

Re: How to make hotspot active when internet connection is d

write a script to check if the net is down. If it is, then create a catch all dns entry using regex, just remember to take it off once the internet comes back on.
by TheWiFiGuy
Sat Jul 21, 2012 11:32 am
Forum: Wireless Networking
Topic: Low signal from omni 2.4 antenna?
Replies: 3
Views: 815

Low signal from omni 2.4 antenna?

Sounds like bad design. You cant expect an ap on one building to provide decent cover into another building as foil backed plasterboard, foil insulation, bronzed or pilkington k glass all severely degrade the signal if not kill it outright. Have you taken readings from the first bulding to ensure th...
by TheWiFiGuy
Wed Jul 18, 2012 10:14 am
Forum: Wireless Networking
Topic: Howto synchronize time on transparent bridge routerboards
Replies: 6
Views: 3095

Re: Howto synchronize time on transparent bridge routerboard

You need to set an IP address on the bridge interface /IP ADDRESS ADD ADDRESS=X.X.X.X/X INTERFACE=BRIDGE_INTERFACE You then need to set a default route for the mikrotik to route its traffic to /IP ROUTE ADD DESTINATION ADDRESS=0.0.0.0/0 Gateway=YOUR GATEWAY If you need name resolution as well /IP DN...
by TheWiFiGuy
Wed Jul 18, 2012 1:13 am
Forum: Wireless Networking
Topic: Clarification request, WDS w/ Ethernet backhaul
Replies: 4
Views: 2808

Re: Clarification request, WDS w/ Ethernet backhaul

2 devices , on the same channel, in close proximity will/can cause interference. Slave/Master is only used if you run wds-slave mode, and it simply allows the slave wireless devices to follow the channel of the master, making changes easier. It has no bearing in what you want to achieve. Set all the...
by TheWiFiGuy
Tue Jul 17, 2012 10:19 pm
Forum: Wireless Networking
Topic: Clarification request, WDS w/ Ethernet backhaul
Replies: 4
Views: 2808

Re: Clarification request, WDS w/ Ethernet backhaul

You dont need WDS. As they are already on a L2 network via ethernet, I cant see what benefit you think WDS will add. You can run them all on the same channel, using the same ssid, with ethernet backhaul and without WDS. It will work fine, although you may find your access points are now interferring...
by TheWiFiGuy
Mon Jul 16, 2012 1:15 am
Forum: General
Topic: Prioritise http and ssh. Plus basic limiting
Replies: 0
Views: 344

Prioritise http and ssh. Plus basic limiting

Hi all I should really know to do this off the top of my head as it was covered in my exams, but ive not had a chance to play with it before and its become urgent whilst im away from the office. I have a site with circa 30 users online, downloading no more than 6 gb per day. Users are limited to 1mb...
by TheWiFiGuy
Thu Jul 12, 2012 5:34 pm
Forum: Wireless Networking
Topic: RB750 DHCP problems?
Replies: 4
Views: 819

Re: RB750 DHCP problems?

Two things to check:

/ip pool
/ip dhcp-server

check the dhcp server is assigning from the correct pool. Ive seen it assign from the default pool despite setting up hotspot pool

/ip hotspot

check hotspot profile, disable address-pool option.
by TheWiFiGuy
Mon Jul 09, 2012 4:55 pm
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34820

Re: WareHouse wireless network based on Mikrotik Mesh

The "whole" point of MESH is in this case is to be able to use 1 channel/ssid and have (as far as the clients is concerned) one big roaming network with good coverage all over. The kind of setup above that refer to different separate channels 1, 6, 11 would only be relevant if (as far as the client...
by TheWiFiGuy
Sun Jul 01, 2012 10:15 am
Forum: Wireless Networking
Topic: WareHouse wireless network based on Mikrotik Mesh
Replies: 36
Views: 34820

Re: WareHouse wireless network based on Mikrotik

In answer to your comment. 1. Clients see only one network with SSID Mikrotik-Mesh and they don't know anything about 4 AP. What are you expecting? Mesh is not some magic setting that turns a cheap access point into a Ruckus supporting seamless handoff. Firstly, you dont need mesh. Get rid of it. Se...
by TheWiFiGuy
Sat Jun 30, 2012 10:35 pm
Forum: Wireless Networking
Topic: Dropping wireless clients on RB751U-2HnD
Replies: 19
Views: 5303

Re: Dropping wireless clients on RB751U-2HnD

1km distance is the smallest distance the system can report based on the calculations it uses, and is nothing to worry about.

No ones still posted their signal strength and tx power outputs.
by TheWiFiGuy
Sat Jun 30, 2012 10:31 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3954

Re: 10 AP running mesh on ethernet

Only use mesh when the devices (access points) need multiple routes to work out the best way to get back the portal. When all wired, theres no need as they all have a direct route. Also, if using Mesh wirelessly (dynamic-mesh and wds) then dont use version 5.x. The WDS bridge loop fixed in 5.18 has ...
by TheWiFiGuy
Sat Jun 30, 2012 12:47 am
Forum: General
Topic: v5.18 released
Replies: 92
Views: 25931

v5.18 released

Unless you need wds in which case improvements in 5.18 really make a difference.
by TheWiFiGuy
Fri Jun 29, 2012 10:30 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3954

Re: 10 AP running mesh on ethernet

Thats correct. All units bridged, different channels. Nodes will drop and re-associate with a nearer node as you move, but should take no more than 1 second or so. Some clients roam better, and its down to the individual software/client device when it switches. If you need fast roaming you'll need s...
by TheWiFiGuy
Fri Jun 29, 2012 10:27 pm
Forum: Wireless Networking
Topic: Dropping wireless clients on RB751U-2HnD
Replies: 19
Views: 5303

Re: Dropping wireless clients on RB751U-2HnD

Try dropping the power down to circa 23db , by default its 30db which is way to high.

Also, just for a test, try without using WPA/WPA2 and see if the ping response stabilises.
by TheWiFiGuy
Fri Jun 29, 2012 5:42 pm
Forum: Wireless Networking
Topic: Dropping wireless clients on RB751U-2HnD
Replies: 19
Views: 5303

Re: Dropping wireless clients on RB751U-2HnD

Not enough info.

What revision firmare? Just a single AP, not routing or bridging loops? Clients signal strength?

Whats the Log saying?
by TheWiFiGuy
Fri Jun 29, 2012 5:38 pm
Forum: Wireless Networking
Topic: 10 AP running mesh on ethernet
Replies: 15
Views: 3954

Re: 10 AP running mesh on ethernet

Thats what it will do, its not seamless fast roaming.

If all your access points are wired (unclear in the post) then get rid of Mesh
by TheWiFiGuy
Thu Jun 28, 2012 6:28 pm
Forum: Scripting
Topic: enable / disable radio script
Replies: 27
Views: 34172

Re: enable / disable radio script

Surely disabling the interface disables the wireless?
by TheWiFiGuy
Wed Jun 27, 2012 9:47 pm
Forum: Scripting
Topic: Checking for something before adding it
Replies: 3
Views: 944

Re: Checking for something before adding it

Using the L7 script as an example, this works:
:if ([:len [/ip hotspot walled-garden find comment=www.apple.com]] > 0) do={ /log info "Entry already in walled garden" } else={ /ip hotspot walled-garden add dst-host=www.apple.com type=bypassed comment=www.apple.com }
Any better way?
by TheWiFiGuy
Wed Jun 27, 2012 9:26 pm
Forum: Scripting
Topic: Checking for something before adding it
Replies: 3
Views: 944

Checking for something before adding it

Hi All I need to send a script to some units ( they pick it up each reboot) to amend the walled garden but I dont want to run the command if the exception is already added to the node. The script is : /ip hotspot walled-garden add dst-host=www.wifiportal.co.uk add dst-host=www.candengo.co.uk add dst...
by TheWiFiGuy
Tue Jun 26, 2012 11:18 pm
Forum: General
Topic: Wireless connection droppping on RB951-2n
Replies: 24
Views: 6952

Wireless connection droppping on RB951-2n

Theres a thread about this exact error in 5.18. Can you try not using wpa as a test?
by TheWiFiGuy
Tue Jun 26, 2012 8:35 pm
Forum: Wireless Networking
Topic: Unicast key exchange timeout over WDS (AP-AP) link
Replies: 4
Views: 2295

Re: Unicast key exchange timeout over WDS (AP-AP) link

I too am seeing this, when using WPA and WDS. Im running 5.18 but have seen it on 5.16 and 5.17 as well. Have not tried earlier versions.
by TheWiFiGuy
Sun Jun 24, 2012 11:23 am
Forum: General
Topic: Connect Online
Replies: 7
Views: 1097

Connect Online

Set up pptp or other vpn access to mikrotik and use that. Or set up port forwarding.

Both are covered in the wiki,
by TheWiFiGuy
Fri Jun 22, 2012 12:38 am
Forum: Wireless Networking
Topic: 5.11 and WDS
Replies: 34
Views: 9655

Re: 5.11 and WDS

Rolled out an install today using 12 x RB751 in a hotel. 4 Wired units, rest being WDS-slaves. Results were initially poor, until we realised we still had 1 of the nodes running 5.6 , once it was rebooted and it applied the update, the ping's dropped from circa 1000ms to 3ms across the site. Current...
by TheWiFiGuy
Mon Jun 18, 2012 5:26 pm
Forum: Wireless Networking
Topic: WIFI access point
Replies: 5
Views: 965

Re: WIFI access point

Or simply set another unit up in WDS-Slave mode, depends on your requirements. Sometimes WDS is fine and using 2 radio cards is over the top and sometimes its the only option.
by TheWiFiGuy
Mon Jun 18, 2012 10:24 am
Forum: Wireless Networking
Topic: Wireless interface stop transmitting
Replies: 24
Views: 7093

Re: Wireless interface stop transmitting

As noted, 5.16 will fix your problem, unless you are using WDS, in which case you may want to try and get hold of 5.18RC1
by TheWiFiGuy
Fri Jun 15, 2012 11:21 pm
Forum: Wireless Networking
Topic: 5.11 and WDS
Replies: 34
Views: 9655

Re: 5.11 and WDS

Still seeing some strange issues when using WDS on the latest 5.18rc (dated 17th June) - I had these errors on 5.16 as well. THis is at an isolated site, no interference in the 2.4 ghz range. Notice two errors: Management Protection Failure , and No Beacons. Hardware is identical, using a script to ...
by TheWiFiGuy
Fri Jun 15, 2012 8:41 pm
Forum: General
Topic: Unable to Upgrade RB1200
Replies: 8
Views: 1152

Unable to Upgrade RB1200

5.6 is older than 5.17 so the error is correct - so much for having faith 8)

You are trying to downgrade the router, as 5.17 is 11 versions higher than 5.6
by TheWiFiGuy
Fri Jun 15, 2012 12:32 am
Forum: RouterBOARD hardware
Topic: RB2011LS-IN - normal power conector ?
Replies: 5
Views: 1128

RB2011LS-IN - normal power conector ?

You see it as a mistake. We like it for installs where we wall mount as stops power plug being pulled out.

Cant please everyone.
by TheWiFiGuy
Tue Jun 12, 2012 10:42 am
Forum: Wireless Networking
Topic: 5.11 and WDS
Replies: 34
Views: 9655

Re: 5.11 and WDS

Still looking good,

Have a test network of 20 RB751's and ping is avg 4ms across mesh, as opposed to fluctuating between 19ms - 4000ms with previous versions.
by TheWiFiGuy
Sat Jun 09, 2012 9:37 am
Forum: Wireless Networking
Topic: need help with configuration for single SSID
Replies: 4
Views: 766

need help with configuration for single SSID

Spread the aps on different non overlapping channels if using wired, same ssid and it will roam a little better.
by TheWiFiGuy
Sat Jun 09, 2012 9:34 am
Forum: General
Topic: Hot-Spot login page on esternal server - Windows server
Replies: 2
Views: 649

Hot-Spot login page on esternal server - Windows server

Or simply do a form post on page load. Theres loads of examples in the wiki on how to do this.
by TheWiFiGuy
Wed Jun 06, 2012 10:56 pm
Forum: Wireless Networking
Topic: 5.11 and WDS
Replies: 34
Views: 9655

Re: 5.11 and WDS

looks like we were able to find the loop when you connect two APs together with WDS. The fix will be added in v5.18.
Any idea on release date, as we have a very large installation due that will rely upon this.
by TheWiFiGuy
Mon Jun 04, 2012 6:12 pm
Forum: Scripting
Topic: Invoking built-in script from a webpage
Replies: 31
Views: 8024

Invoking built-in script from a webpage

Developing your own features on top of mikrotik is what gives your business value, otherwise you are no different from everyone else. Setting up a simple free radius lamp server takes less than 60 minutes, even less if you use a cloud server. Get the business logic off the mt and onto your own syste...
by TheWiFiGuy
Mon Jun 04, 2012 1:55 am
Forum: General
Topic: Wifi hotspot issues
Replies: 6
Views: 765

Wifi hotspot issues

Need lots more information...

What protocol are you running on the sxts? What rx/tx values are being reported. What are the logs showing in terms of the disconnects

Help us to help you by providing detailed information.
by TheWiFiGuy
Sun Jun 03, 2012 9:09 pm
Forum: General
Topic: Wifi hotspot issues
Replies: 6
Views: 765

Wifi hotspot issues

Whats in the logs? Are the sxt loosing connections, or is it end user network issues.
by TheWiFiGuy
Fri Jun 01, 2012 1:32 am
Forum: Wireless Networking
Topic: hotspot login page and Ipad ?
Replies: 4
Views: 3137

hotspot login page and Ipad ?

Leave Candengo some karma if it helped 8)
by TheWiFiGuy
Sun May 27, 2012 6:51 pm
Forum: RouterBOARD hardware
Topic: Broken 750G
Replies: 3
Views: 794

Broken 750G

That should work still, we power all our equipment via poe and jack to provideredundancy
by TheWiFiGuy
Tue May 22, 2012 10:06 pm
Forum: General
Topic: Hotspot and iphone/ipad autofill
Replies: 9
Views: 7645

Hotspot and iphone/ipad autofill

We too have over 50 percent of our customers using apple devices, but have no issues whatsoever. Over 20,000 sessions per day across the networks. We do add apple.com into the walled garden, to stop the apple captive portal helper popping up meaning users are redirected lime any other user when they...
by TheWiFiGuy
Mon May 21, 2012 9:34 pm
Forum: Wireless Networking
Topic: WDS Issue, constant disconnects
Replies: 3
Views: 2788

Re: WDS Issue, constant disconnects

Using Static-Mesh for WDS setting yields no better results: 16:46:30 wireless,info D6:CA:6D:2D:72:91@VAP1: connected, is AP, wants WDS, wants bridge 16:46:41 wireless,info D6:CA:6D:2D:72:91@VAP1: disconnected, no beacons received 16:46:47 wireless,info D6:CA:6D:2D:72:91@VAP1: connected, is AP, wants...
by TheWiFiGuy
Mon May 21, 2012 5:12 pm
Forum: Wireless Networking
Topic: WDS Issue, constant disconnects
Replies: 3
Views: 2788

Re: WDS Issue, constant disconnects

Dynamic WDS with HWMP.

I'll switch to static and see if its still got that bug, but was rather hoping it was fixed by now. Good catch
by TheWiFiGuy
Mon May 21, 2012 3:57 pm
Forum: General
Topic: Paid for Support
Replies: 2
Views: 450

Re: Paid for Support

Hey, Does anyone know if any companies in the UK offer paid for support - we're trying to resolve a problem and need a semi-urgent solution. Does anyone know if there are any companies in the UK which basically offer Mikrotik support, particularly with regards configuration? Cheers Andy Hi Andy The...
by TheWiFiGuy
Mon May 21, 2012 3:47 pm
Forum: Wireless Networking
Topic: WDS Issue, constant disconnects
Replies: 3
Views: 2788

WDS Issue, constant disconnects

Hi Im using some of the new 2.4 L4 grooves and am seeing a problem both on my testbed in the office, and my testbed in the field (literally) Every 1-2 (MAX) hours, the WDS link is dropped: 11:18:32 wireless,info D6:CA:6D:2B:6B:88@VAP1: connected, is AP, wants WDS, wants bridge 11:19:00 wireless,info...
by TheWiFiGuy
Fri May 04, 2012 1:47 am
Forum: Wireless Networking
Topic: 2.4GHz MIMO Antenna / Enclosure - Testers Needed
Replies: 9
Views: 1438

2.4GHz MIMO Antenna / Enclosure - Testers Needed

Ive found the mounting bracket assemby not too great on the jirrus enclosures as its affixed to one side and stresses a lotmin windy locations..
by TheWiFiGuy
Thu May 03, 2012 9:44 pm
Forum: Beginner Basics
Topic: RouterOS v5.1 - transparent proxy
Replies: 28
Views: 5953

RouterOS v5.1 - transparent proxy

Does a basic traceroute work?
by TheWiFiGuy
Sun Apr 29, 2012 12:17 pm
Forum: General
Topic: rb750g - ports 1-5 set to switch 0, need 2-5 on sw1
Replies: 2
Views: 688

rb750g - ports 1-5 set to switch 0, need 2-5 on sw1

Set config to default with / system reset-configuration which will load the default script
by TheWiFiGuy
Sat Apr 28, 2012 9:50 pm
Forum: Beginner Basics
Topic: Track user activity
Replies: 13
Views: 18276

Track user activity

Install proxy server on routerboard, no caching. Then use system logging to create a remote log rule using syslog

Install syslog on remote server with mysql logging and job done. Will require lots of disk space
by TheWiFiGuy
Wed Apr 25, 2012 4:03 pm
Forum: General
Topic: Hotspot and multiple IP's per MAC
Replies: 15
Views: 6856

Re: Hotspot and multiple IP's per MAC

Can you not simply disable Address Pool in the hotspot settings?
by TheWiFiGuy
Wed Apr 25, 2012 9:19 am
Forum: RouterBOARD hardware
Topic: RB751U-2HnD - poor wireless performance & problems
Replies: 113
Views: 114112

RB751U-2HnD - poor wireless performance & problems

I have to disagree. Were running them as internal repeaters for our hotspotmservices with no problems whatsoever. Using both 751 and 751 g without external antenna ( and would never,ever use a 15 db omni on an internal device ). So far at least 100+ devices without a single dead unit. My advice: buy...
by TheWiFiGuy
Sat Apr 21, 2012 7:33 pm
Forum: Wireless Networking
Topic: Wireless with multiple AP's for mobile barcode readers.
Replies: 1
Views: 660

Re: Wireless with multiple AP's for mobile barcode readers.

Very simple, we have many implementations in such an environment for fruit picking industry. Set up the access points using same ssid, different channels (1,6,11 or similar) . Wire each AP back to a central switch, ensuring you have a central DHCP server. Thats it, job done. We have systems running ...
by TheWiFiGuy
Sat Apr 21, 2012 7:26 pm
Forum: Wireless Networking
Topic: MikroTik RB751U-2HnD as repeater (preferably with working U)
Replies: 12
Views: 31594

Re: MikroTik RB751U-2HnD as repeater (preferably with workin

Depending on what you are trying to repeat, it could work fine. Simply set the 751 to WDS-SLAVE mode, set the SSID and job done. As suggested you will loose 1/2 the available bandwidth of the radio, but that could still be enough. We use RB751's as simple WDS repeater with both engenius and mikrotik...
  • 1
  • 2