Community discussions

MikroTik App

Search found 13 matches

by rigan123
Sat Jul 07, 2018 3:37 am
Forum: The User Manager
Topic: error simultaneous session limit reached
Replies: 12
Views: 15672

Re: error simultaneous session limit reached

Log into your Mikrotik via Winbox.

IP>Hotspot>User Profile> Default User profile. Double click and open the default profile. The option "shared users" shouldn't be configured.
by rigan123
Thu Nov 07, 2013 11:52 am
Forum: General
Topic: WAN interface usage is higher than LAN interface usage
Replies: 10
Views: 4460

Re: WAN interface usage is higher than LAN interface usage

Hello, In my experience, this situation is almost always caused by lack of or incorrect firewall configuration. Many people consider that the use of NAT is firewalling. It is not. The source of this traffic is often that either or both the DNS server and/or web proxy are enabled on the router, but ...
by rigan123
Wed Nov 06, 2013 11:58 am
Forum: General
Topic: WAN interface usage is higher than LAN interface usage
Replies: 10
Views: 4460

WAN interface usage is higher than LAN interface usage

I've found something very strange.

I've only one LAN interface active and I've configured NAT.I see my WAN interface usage has more usage than LAN.And it is always killing my 7-8 Mbps bandwidth(approx) taken from upstream.
Capture.JPG
Any idea?
by rigan123
Thu Jul 04, 2013 2:45 pm
Forum: Beginner Basics
Topic: how to block youtube on mikrotik 3.23
Replies: 11
Views: 16936

Re: how to block youtube on mikrotik 3.23

Not a good idea ! 1. IP may be changed anytime 2. You want to block Youtube video only but not whole Youtube site. You should browse Youtube but you shouldn't stream video. 3. If you block IP then you can't browse some other hosted sites too.Like youtube is owned by Google.If you block whole youtube...
by rigan123
Fri Jan 20, 2012 5:47 pm
Forum: General
Topic: Mikrotik RB433AH interface maximum throughput/capacity?
Replies: 2
Views: 654

Re: Mikrotik RB433AH interface maximum throughput/capacity?

you must not use btest from the device, use btest through the device, 2 computers. It can easy do 300mbps in bridge mode.
Hello,

I found the problem.Mark routing was also enabled besides NAT.Using NAT I get more than 90 Mbps.But using Mark routing I can't get more than 30Mbps.
by rigan123
Fri Jan 20, 2012 4:06 am
Forum: General
Topic: Mikrotik RB433AH interface maximum throughput/capacity?
Replies: 2
Views: 654

Mikrotik RB433AH interface maximum throughput/capacity?

Hi,

I'm using Mikrotik RB433AH.
What is the maximum capacity/throughput of Miktorik's interface?

I have checked and getting not more 30 Mbps.
I checked by:

1. Marking Auto Negotiation and unmarking Auto Negotiation
2. Selecting both 100Mbps Full duplex and 1Gbps Full Duplex

I'm using NAT.
by rigan123
Wed Nov 30, 2011 2:53 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 386
Views: 248156

Re: NOT TO DO. Weird instalations?

Some people are ignorant and don't have design and planning about the equipments. Preliminary they don't want to spend much money but after a certain period they start suffering which costs more $$$$$$$$$$$$$. They need to shift these equipments to a good location and have proper design to avoid fut...
by rigan123
Tue Nov 29, 2011 3:18 pm
Forum: RouterBOARD hardware
Topic: Restart RB1200 every day, aleatory
Replies: 44
Views: 11092

Re: Restart RB1200 every day, aleatory

Could you please check that Watchdog Timer on/off ?
Just go to System>Watchdog and uncheck the timer.

Best Regards,
Rigan.
by rigan123
Tue Nov 29, 2011 3:15 pm
Forum: General
Topic: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and v6)
Replies: 62
Views: 16521

Re: RB1200 ROS 5.0 - up to 5.5 - randomly reboots (BGPv4 and

Hi All, Mikrotik RouterBoard may reboot for several issues.Most common one is for Watchdog Utilities. To check it Go to System>Watchdog .Check that if timer is on/off.And also check 'ping start after reboot'.Just uncheck the timer. You should check log to identify the issue.If it is kernel panic the...
by rigan123
Tue Nov 29, 2011 3:03 pm
Forum: Beginner Basics
Topic: dual wan-dual lan conf.
Replies: 6
Views: 1761

Re: dual wan-dual lan conf.

Use Mark Routing. IP >Firewall>Mangle and add 2 rules. chain=prerouting action=mark-routing new-routing-mark=LAN1 Clients passthrough=no src-address=10.10.10.1 chain=prerouting action=mark-routing new-routing-mark=LAN2 Clients passthrough=no src-address=10.0.0.1 Now got to IP>Route Add destination=0...
by rigan123
Mon Nov 28, 2011 5:50 pm
Forum: General
Topic: Usage difference between LAN and WAN
Replies: 0
Views: 524

Usage difference between LAN and WAN

Hi, I'm using RB33AH. I have configured SRC NAT and Mark Routing. WAN: 41.x.x.30/27 LAN: 41.x.x.129/26 172.18.0.1/24 172.30.0.2/24 IP address.JPG I have configured SRCNAT: 0 chain=srcnat action=masquerade src-address=172.18.0.0/24 I'm using Mark Routing and configured mangle: 0 chain=prerouting acti...
by rigan123
Mon Nov 28, 2011 3:02 pm
Forum: General
Topic: Packet Loss (no reason why)
Replies: 4
Views: 1134

Re: Packet Loss (no reason why)

That's good but you need to investigate to avoid future occurrence.

Best Regards,
Rigan
MCSA,ITILV3F
by rigan123
Mon Nov 28, 2011 1:02 pm
Forum: General
Topic: Packet Loss (no reason why)
Replies: 4
Views: 1134

Re: Packet Loss (no reason why)

Hi, Did you check the usage?Check the WAN and LAN usage from the interface.If your WAN interface uses maximum bandwidth then you might encounter packet loss. Are you using web proxy? Sometimes WAN interface might use huge bandwidth due to improper security configuration if web proxy is enabled. Plea...