Community discussions

MikroTik App

Search found 34 matches

by krajnalic
Wed Mar 25, 2015 1:19 pm
Forum: General
Topic: 1 year uptime on CCR1036-12G-4S
Replies: 7
Views: 1619

Re: 1 year uptime on CCR1036-12G-4S

x86-uptime.jpg
This is my uptime, but on X86 platform
by krajnalic
Thu Oct 16, 2014 8:53 pm
Forum: General
Topic: Sample Installations - Sticky Please
Replies: 229
Views: 142142

Re: Sample Installations - Sticky Please

My two installs, can someone give me some instructions on how to make off my own pigtails with coaxial cable? Feed on the second picture is not installed properly. Polarisation mark must be upwards while antenna grid is in horizontal (for vertical polarisation). If you want horizontal polarisation ...
by krajnalic
Mon Feb 10, 2014 2:28 am
Forum: General
Topic: Report from PPPoE Clients
Replies: 2
Views: 920

Re: Report from PPPoE Clients

You can use Radiusmanager from DMA Soft Lab. I recommend them
http://dmasoftlab.com/cont/home
by krajnalic
Sat Feb 01, 2014 4:01 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 62910

Re: MUM Europe 2014 - Italy, Venice, February 20-21

That was stupid answer, Normis. Of course, people are coming for the MUM. I dont want to drive 500km for lottery. All I want to say is that you should stick to scheduled times, not to cancel presentation (or two) and then change time of next presentation (or lottery). Because, some people are maybe ...
by krajnalic
Thu Jan 30, 2014 2:05 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 146
Views: 62910

Re: MUM Europe 2014 - Italy, Venice, February 20-21

In Zagreb, lottery was scheduled at 17:30 but was started one hour earlier, so most people wasnt there at the moment of pulling the prizes....
by krajnalic
Sun Jan 19, 2014 2:06 pm
Forum: General
Topic: How can I block ping in my local network
Replies: 9
Views: 4128

Re: How can I block ping in my local network

/ip firewall filter add chain=forward protocol=icmp action=drop
by krajnalic
Tue Oct 01, 2013 2:08 am
Forum: General
Topic: How to Block torrent 100%? Only 2 lines. It is solved.
Replies: 63
Views: 99864

Re: How to Block torrent 100%? Only 2 lines. It is solved.

to lilproten

you can use scheduler to enable/disable firewall rules at given hours
by krajnalic
Sun Jun 23, 2013 1:34 am
Forum: General
Topic: Drop all communication except PPPoE Connections
Replies: 3
Views: 1755

Re: Drop all communication except PPPoE Connections

you can add out-interface=ether2 in those rules
by krajnalic
Sun Jun 23, 2013 1:30 am
Forum: General
Topic: Ppppoe-connection server and freeze big download
Replies: 5
Views: 1619

Re: Ppppoe-connection server and freeze big download

You have to add the rule to pppoe server, not client
by krajnalic
Fri Jun 21, 2013 1:45 am
Forum: RouterBOARD hardware
Topic: RB750GL memory(ram) problem
Replies: 12
Views: 3583

Re: RB750GL memory(ram) problem

It is not hardware related problem. I use API to make day/night bandwidth schemes. I found that if I turn off (disable) API, everything is working just fine. Problem solved.
by krajnalic
Fri Jun 21, 2013 1:31 am
Forum: General
Topic: CCR1036-12-4S vs PC Server
Replies: 23
Views: 4568

Re: CCR1036-12-4S vs PC Server

ASUS P8P67 WS Revolution + Core i7 + Some quality Intel i350 cards would be the best solution for PPPoE server. We had around 3000 dynamic queues (pppoe users) on one machine, CPU is below 20% but there is problem with router os and we splited it into multiple pppoe servers. It would be great if you...
by krajnalic
Fri Jun 21, 2013 1:21 am
Forum: General
Topic: Ppppoe-connection server and freeze big download
Replies: 5
Views: 1619

Re: Ppppoe-connection server and freeze big download

I found that the best performance/compatibility is when mtu is set to 1360. You should do: /ip/firewall/mangle add action=change-mss chain=forward comment="MTU change to 1360" disabled=no new-mss=1360 passthrough=yes protocol=tcp tcp-flags=syn tcp-mss=1361-65535 also, RB1000 performance is best with...
by krajnalic
Sun Mar 31, 2013 2:04 pm
Forum: General
Topic: Drop all communication except PPPoE Connections
Replies: 3
Views: 1755

Re: Drop all communication except PPPoE Connections

Hi. The solution is simple. You have to put three rules into Interface/Bridge/Filters : add action=accept chain=forward comment="" disabled=no mac-protocol=pppoe-discovery add action=accept chain=forward comment="" disabled=no mac-protocol=pppoe add action=drop chain=forward comment="" disabled=no T...
by krajnalic
Sat Nov 17, 2012 6:47 pm
Forum: General
Topic: 5.21 released
Replies: 78
Views: 20989

Re: 5.21 released

nv2 5.18 vs 5.21. ptp link 7km, rock solid as before 5.21, but ping is better
by krajnalic
Thu Oct 11, 2012 12:49 pm
Forum: RouterBOARD hardware
Topic: RB750GL memory(ram) problem
Replies: 12
Views: 3583

Re: RB750GL memory(ram) problem

I also have this problem with X86 3ghz Intel with 512Mb of RAM. Every two weeks I reboot it to avoid problems. ROS is 5.14
by krajnalic
Thu Feb 23, 2012 1:47 am
Forum: Wireless Networking
Topic: limite number of wireless user
Replies: 7
Views: 1422

Re: limite number of wireless user

Yes, you can. In Advanced tab under Wireless, there is Max Station Count (default is 2007), change it to 50.

Or from console:

/interface wireless
set 0 max-station-count=50

where 0 is number of your wlan card, (maybe 1 or 2 if you have more than 1 card)

Dont forget to give karma
by krajnalic
Thu Feb 23, 2012 1:40 am
Forum: Wireless Networking
Topic: consistent low rx-rate on station-bridge R52Hn
Replies: 1
Views: 992

Re: consistent low rx-rate on station-bridge R52Hn

This R52Hn is a piece of s.it. Better use R52nM it is cheaper and much better. Distance of 10km is not a problem with 24db antennas. Signal approx -60. I had similiar problems with R52Hn and I changed them all for R52nM. The problem is gone.

Dont forget to give karma
by krajnalic
Thu Feb 23, 2012 12:16 am
Forum: General
Topic: not sure
Replies: 3
Views: 822

Re: not sure

and dont forget to give me karma !!!!
by krajnalic
Tue Feb 21, 2012 3:53 pm
Forum: Wireless Networking
Topic: AP Tx Freeze every 5 minutes aprox
Replies: 2
Views: 678

Re: AP Tx Freeze every 5 minutes aprox

Did you change power supply? Are there high power cards on RB433AH? Use 24V, 1A power adapter, use max 2 high power and 1 normal power card (2xR52H, 1xR52).
by krajnalic
Sun Feb 19, 2012 2:02 pm
Forum: General
Topic: not sure
Replies: 3
Views: 822

Re: not sure

you can simply put ether1 and wlan1 into a new bridge, everything will work just fine. first create bridge: add admin-mac=00:00:00:00:00:00 ageing-time=5m arp=enabled auto-mac=yes \ disabled=no forward-delay=15s l2mtu=65535 max-message-age=20s mtu=1500 \ name=bridge1 priority=0x8000 protocol-mode=no...
by krajnalic
Sun Feb 19, 2012 3:08 am
Forum: Wireless Networking
Topic: Non-Traditional 802.11 frequencies
Replies: 3
Views: 1114

Re: Non-Traditional 802.11 frequencies

There are frequency convertors that raise up 5ghz to 10ghz or even higer . You can use standard CM9 card with freq convertor to get 10GHz. Also Ubiquity has new product PowerBridge M10 that operates in 10Ghz spectrum..

Please dont forget to give karma
by krajnalic
Sun Feb 19, 2012 3:05 am
Forum: General
Topic: Serious performance issue
Replies: 1
Views: 599

Re: Serious performance issue

I had the same problem until I add mangle rule: add action=change-mss chain=forward comment="MTU 1360" \ disabled=no new-mss=1360 passthrough=yes protocol=tcp tcp-flags=syn \ tcp-mss=1361-65535 Also dont set change-tcp-mss=yes in ppp profile. The problem is that mikrotik tries to change MSS for ever...
by krajnalic
Sun Feb 19, 2012 2:49 am
Forum: Wireless Networking
Topic: About Ack. Timeout
Replies: 2
Views: 1375

Re: About Ack. Timeout

mikrotik sets ack timeout for farthest registered client. try to use nstreme protocol for better ping and troughput.


dont forget to give karma
by krajnalic
Sun Feb 19, 2012 2:45 am
Forum: General
Topic: ups connection
Replies: 1
Views: 768

Re: ups connection

you must install UPS.npk package and you musthave proper communication cable . The scheme for cable you can find on
http://wiki.mikrotik.com/wiki/Manual:System/UPS




dont forget to give karma
by krajnalic
Sun Feb 19, 2012 2:41 am
Forum: Wireless Networking
Topic: Compex WLM54GP-23 diversity switch?
Replies: 1
Views: 778

Re: Compex WLM54GP-23 diversity switch?

it is between main an aux connector. unsolder it and solder a wire directly to main or aux connector. you will lose tx-a rx-b but the card will be usable until next lightning.





dont forget to give karma
by krajnalic
Sun Feb 19, 2012 2:31 am
Forum: Wireless Networking
Topic: high CPU usage on Mikrotik relay routers
Replies: 1
Views: 931

Re: high CPU usage on Mikrotik relay routers

On router 2 (the one in the middle) did you put wlan1 (IN) and wlan2 (OUT) in a WDS bridge? If not, try. Also try to change freq. for wlan1 and wlan2 not to be the same. For example Router A --5180mhz-- Router B --5280mhz-- Router C


Dont forget to give karma
by krajnalic
Sun Feb 19, 2012 2:21 am
Forum: Wireless Networking
Topic: What can I do to speed up
Replies: 1
Views: 840

Re: What can I do to speed up

You cant get speeds higher than 100mbit on SXT, because SXT has fast-ethernet port, not gigabit. Stone obstacle is big problem for 5Ghz. I suggest to use hammer and drill a hole in a stone wall and connect client and omnitik with cat5 cable (distance 20-30m is not a problem). This is the only soluti...
by krajnalic
Sun Feb 19, 2012 2:15 am
Forum: RouterBOARD hardware
Topic: Problem without explanation?
Replies: 1
Views: 777

Re: Problem without explanation?

Towers B and C are stations to Tower A. With same configuration and hardware you will get your max if you turn on nstreme or NV2 protocol. You will get improvement, maybe this solves your problem. The best solution is to put another 5Ghz card in 493A (Tower A) and one more antena directed to tower B...
by krajnalic
Sun Feb 19, 2012 2:04 am
Forum: General
Topic: blocking to another network
Replies: 1
Views: 610

Re: blocking to another network

are you sure about src and dest addresses. Maybe src is dest and dest is src. Change src to be 192.168.100.50-192.168.100.254 and dest to be 192.168.102.0/24
by krajnalic
Sun Feb 19, 2012 1:55 am
Forum: RouterBOARD hardware
Topic: Which antenna & RB for basestation?
Replies: 1
Views: 737

Re: Which antenna & RB for basestation?

50 users on a single AP is not a good idea, so better split it into 2 if you can. RBSXT is good if distance is max 2km, and you can make your 20mbit/20mbit. For longer distances you must use dish 2x2 MIMO antennas and RB711 dual chain model for example. This is from my experience. If I helped you a ...
by krajnalic
Sun Feb 19, 2012 1:42 am
Forum: Wireless Networking
Topic: [ask} change omni 24ghz and grid 2.4ghz and sector 2.4ghz
Replies: 1
Views: 622

Re: [ask} change omni 24ghz and grid 2.4ghz and sector 2.4gh

Of course you can use your equipment, but your antennas will work with best effiecency on specific channel (probably 2.4Ghz channel 6, as a center channel), on any other frequencies you will lose few decibels. If you have clients that have regular CPE units (not Mikrotik), they can not connect to yo...
by krajnalic
Sun Feb 19, 2012 1:35 am
Forum: Beginner Basics
Topic: PPPoE Server Hang issue
Replies: 1
Views: 650

Re: PPPoE Server Hang issue

It is probably hardware failure or incompatibility. Try with newest ROS, if the problem persists again, test your hardware, change ethernet card... My PPPoe server runs on X86 machine with Intel chipset, Intel Pentium CPU, and realtek ethernet. It works well for around 200 users. CPU is about 10%-20...
by krajnalic
Sun Feb 19, 2012 1:22 am
Forum: RouterBOARD hardware
Topic: RB600A vs RB435G
Replies: 1
Views: 856

Re: RB600A vs RB435G

RB435G is RB433AH with gigabit ethernet and 5 mini-pci ports. It is much faster than RB600A.