Hi, I would have a theoretical question.I have seen in a mum-video that the best way to limit bandwidth for users in ccr that use simple queues with parents. I think this is because the package does not have to go through all the queues, just find his parents. I have try it on my desk and it works f...

same problem today in our 1100ahx4 (6.43.4)

Hi ALL! There is an office where we use an RB2011iL as a router, it has a simple configuration.(dual wan, nat, DHCP server...) There are 10-12 computers in the office.The problem is that there is no internet on 3 computers (windows 7). They get an IP address from the DHCP server, but I can not ping ...

hy everyone, we use a 60 GHz link in 387m (signal :95, rssi: -54, tx-phy-rate:2,3 Gbps) , it works great, but i do not find how to see "link downs" in dude. I can see a lot of things with snmp, only this parameter i not find. Have anyone an oid code for this, or just tell me where can i pr...

/ip UPnP is not enabled

I still get this error in every 15 minutes

Hy,

I get this error: "pppoe,ppp,error : could not add UPnP interface: std failure: broken path (2)"

the RB is a RB110AHx4 (6.42.3 ) and the CPU runs over 50%.

Any idea why i get this error?

thanks

thanks, it could be a good solution. if there is no new entry in the radacct table for one minute then send me an email. you can offer such a monitoring tool?

thanks

Hy, i hope somebody have met with this problem and know a solution. we are authenticating our costumers with freeradius. there are two of them in our network, both have their own mysql database, which are in sync. (master<-slave) in the main router both server are included. my problem is , how i kno...

thank you! i have made a script too, it works!

/ppp active
:foreach pppoe in=[find] do={
:local name [get $pppoe name]
:log error $name
remove $pppoe}

no , with the last dude works everything fine! thanks!

I have made a virtual mikrotik x86 and installed the last dude on this VM. The snmpwalk is working I see the list about the oid numbers, but if I put the numbers in the "Appearance" menu nothing happens. I will try it later with a Cambium device too.

Any idea?

I have the same problem. I try the snmpwalk in the Dude nothing happens, but if i do it in my Os (ubuntu linux) it works i get the numbers. The cambium MIB file I have copied to the Dude Server.

same issue! (ccr1016-12G 750 user). Any solution?

Hy, I would like to get out some parameters from the radios with oid codes in the dude. It works fine with ubnt radios, I run the snmpwalk in the dude and i see the codes, but in case of deliberant, ligowave or cambium radios i see nothing. if i run the snmpwalk in my os (ubuntu) i can see the codes...

this solution works!
https://www.nasa-security.net/mikrotik/ ... ith-ipsec/

same problem. " received message with wrong tunnel id ignoring"

PPPoE will use CPU, rather stick a router below the radio if you want to do >50Mbps

you have right. i put the pppoe in the router or in my laptop and it works fine.

thanks

Hy,

i have a ccr router where all my pppoe clients are, how can i drop them at the same time every day? the only way is the scheduler with a script or there is a setting somewhere in mikrotik to do is?

thanks

thanks, i will try it today

hy, i hope someone have an ide how to solve my problem. i provide wireless internet, the costumer have a radio with pppoe public ip. if i set the radio with static local ip i can download with 100 Mbit/s, but with pppoe public ip just with 40-50 Mbit/s.

thanks for any suggestion

I'd be lying if I said I understand what do you mean in your last post. i try to translate it in google but does not make sense. Could you please explaine  it in other words. But I have another question. I have tried to connect from two different laptops with pppoe with the same name. It works I sa...

Thank you for your reply. Do you know a way, how to stop it? our pppoe tunnels created in a CCR1016-12G (with freeradius) and sometimes (quarterly) happens that the cpu goes up to 100 % and almost all of our clients have this -1 suffix. we have to  reboot the router and everything go back to normal ...

Hy,

We autenticate our clients with radius server and every morning ca. 21-20 clients have after her name  a -1. have someone an idea, why is this? we delete the users from the pppoe list, after a few seconds they connect back without the -1.

Hy,

How can I export the live pppoe-clients with caller id (mac) from a routerboard to file(txt)?

thanks

i used this description!

http://blog.butchevans.com/2009/12/how- ... -and-pptp/

i use this pptp to conect from one client to two servers and it works great i reach both servers, but i had to join another client to both server but it generated 2 Mb traffic and everyting stops. I use rstp in the bridges but it works not. i thing it come to be a loop.know someone how can i solve t...

"thegreatone" do you use radius server for authenticating? because we have the same problem but i tought that the radius server has a trouble not the ccr!

i heard from my distributor the it will be a new mikrotik version just for the ccr, is it true? and it will solve all the problems!

thanks

hi normis


We bought a CCR 1016-12G, it have a few problems. It always restart twice a day and drops many pppoe connections during the day. we use v6.0 rc7 .do you know how can we fix these problems? thanks for help
and sorry for bad english:)