MikroTik

hngjared

Thanks Rex!

hngjared

We received some new hardware with factory default ROS v7. It appears the dhcp server, lease-script is no longer taking local/global variables? Has anyone found a fix for this? See below for script. { :local mac "$leaseActMAC" :local host $"lease-hostname" :if ([:pick $host 0 4] ...

hngjared

Updating two NetMetal 5 from 6.44 to 6.48.5 were okay. but when I update bootloader the device start to flip flop on ether1, so I had to bring them down netinstall to 6.47.10 and everything seems okay then! I do not recommend anyone to install this long-term version! I've had the same problem on 3 ...

hngjared

To add the hostname use $"lease-hostname"

hngjared

Thank you for fixing log window!

hngjared

Yes, problem was with the ATT router. Thanks for the heads up @gotsprings. I ended up creating a separate network for cell phones to use ATT direct and the rest of my devices running over my router in the DMZ. ATT is a real P in the A!

hngjared

Sure enough it stopped working again. I'm going to take the router and connect to a static Spectrum address to see if this is an issue with ATT and DMZ/NAT from their router.

hngjared

I appreciate the reply's. Yes my ATT router is in DMZ. I watched David Attias SIP/ALG video from MUM in 2017 and found after disabling SIP the router needs to be rebooted. Once I disabled SIP/ALG and rebooted the router I was able to make a call and hold the connection for 5 minutes. Hoping that was...

hngjared

I'm having issues on a hAP ac with WiFi calling. Call will connect for about 15 seconds before the person on the other end is unable to hear my voice while I can still hear theres. I've read the forums and others having issues but have been unable to find a solution. I'm running on ROS 6.45.8. I've ...

hngjared

Your script count should clear after reboot.
If not, there's a work around. You can can run a scheduler on startup to remove the script and then undo to set the counter to 0.
/system script remove "No-IP_script"
/undo

hngjared

Had to downgrade back to 3.20. Does not work well with a resolution of 3840x2160. Log was unreadable with lines overlapping.

hngjared

All, I'm having issues with a RB1100AHx2. When I hard code the speed and duplex to 100 full on a port it's a dramatic drop (14Mbps) in throughput on the download? If the port is set to auto negotiation I get the full 200Mbps from the fiber circuit. The port in question is not the WAN port but a LAN ...

hngjared

Same problem on 6.34.2. I downgraded to 6.33.5 which still had the same problem. I downgraded again to 6.33.1 and problem is resolved.

ARP.GIF

hngjared

Unable to downgrade firmware from 3.24 on powerpc OS on 1100ahx2. I've verified on 3 separate units.

I was however able to downgrade FW on rb850x2.

Regular OS downgrades fine.

Is there any work around or is this a known issue that will be fixed at some point?

Thank you!

hngjared

/system backup save name=XXXXX dont-encrypt=yes

hngjared

Dear All, Still there is a problem with SNTP- client, I tried so may NTP server ip but the clock still not Syncing, any one else facing this problem? what is the message in SNTP status? did you try other servers? Yes, I tried other IP servers, still not working, the time is not syncing.. I haven't ...

hngjared

*) wireless - added WMM power save suport for mobile devices; Is this enabled by default? Does "WMM support" need to be set to "enabled" in the wlan settings? After testing I don't see any noticeable improvement. When I have my device in power saving mode latency jumps into the ...

hngjared

*) wireless - added WMM power save suport for mobile devices;

Is this enabled by default?

Does "WMM support" need to be set to "enabled" in the wlan settings?

hngjared

For whatever reason it started working properly when I changed the order of the commands.

Once I set the silent reboot first and the CPU frequency second it worked fine.

I appreciate it.

Thanks!

hngjared

I'm trying to run a script to properly set the CPU back to its proper setting after kernel failure. I want to schedule this to run on startup but can't seem to get it to work. If I remove the "/system reboot;" string it works fine and all is well. It's almost as if the reboot happens and d...

hngjared

Solved my own problem. Order was backwards. Set after the the results.

hngjared

I'm trying to pull some data from a bridge interface but am having some problems. Anyone able to provide a pointer to get this working? # Get b/w-load samples :global uload :set uload ([interface monitor-traffic bridge1 once do= {get $"rx-bits-per-second"}] ) Any help would be greatly appr...

hngjared

It would be nice if there was an option for duration in the "traffic monitor" feature. Be a great way yo automatically adjust b/w queues. Also need to start allowing SSH and telnet to be run via scripts or schedulers. Would really make life a little easier on those of us who are administra...

hngjared

are you using wireless-fp package or wireless-cm2 package? The CAPs are connected to CAPsMAN via MAC connection or IP connection? Using wireless-cm2 package and connected via MAC. Very basic created Config and applied to the CAP when it showed up in the interfaces. Again, everything works fine unti...

hngjared

are you using wireless-fp package or wireless-cm2 package? The CAPs are connected to CAPsMAN via MAC connection or IP connection? Using wireless-cm2 package and connected via MAC. Very basic created Config and applied to the CAP when it showed up in the interfaces. Again, everything works fine unti...

hngjared

I'm working in a testing environment with a very basic layout. I'm using the latest version of Router OS and CAPsMANv2 on 6.27. I have a 5 port RB450G gateway connected to a 5 port 750UP POE switch powering 4 RB912UAG-2HPnD APs. I have the 450G acting as the controller for the 4 APs. Everything work...

hngjared

I appreciate the quick response. My problem is I unhooked the CAPsMAN controller from the LAN for about 30 seconds and plugged it back up. Once plugged back in the access points never sync back with the controller? You'd think this would happen quickly and automatically. But, I'm unable to get the u...

hngjared

I'm just starting to demo the CAPsMANv2. When I remove the CAPsMAN from the network for a few seconds and reconnect my APs(CAPS) do not reconnect unless I reboot or disable/re-enable the CAP in the wireless interface of the AP. Is this normal? Is there a setting I'm missing that allows the units to ...

hngjared

Bomber67, No doubt there's an issue with the MAC telnet connection to the RB850Gx2. I've read some of the replies from other users here but this is specific to this model. No it's not normal, contrary to what the other people are saying. I've upgrade up to 6.25 and the problem is still clear. Once y...

hngjared

Thanks Rex!

I changed up your suggestions from earlier and have the script functioning as I need considering the time is irrelevant to me.

I'll definitely take a look at your link though.

I owe you a drink next time I'm in Italy!

hngjared

Thanks,

I wrote a quick script to remove the comment from the schedule so the script will still run and I removed the time from the subject of the email.

It will function for the mean time.

Maybe we can get Skot to update the script as it's very beneficial.

I appreciate your time today.

hngjared

Very true!

Rex, 1 last thing when/if you have a moment.

The script runs good but the $currentTime resolves to Jan, 1 1970 after the script is run.

Any ideas? The time on my Routerboard shows to be current and correct.

hngjared

Rex,

You're the man.

You keep solving my problems I'm going to have to put you on the payroll.

I really appreciate it.

hngjared

Skot, script is very nice and very beneficial! Welll done!

Quick question. Script runs flawlessly on 6.2 as you stated. Any way if you have a free moment you could take a look see and try on 6.13. I can't get the script to complete outside of 6.2.

It would be much appreciated!

Cheers

hngjared

Thanks Rex.

Looks like a good idea.

I'll give it a try and let you know how it goes.

hngjared

Rextended, Yes, I've been banning the guests regularly. My only problem is I administrate about 250 properties throughout the states and this is a common problem. I'd like to find a solution so I don't have to pull myself away every day to ban a guest due to this issue. And I do mean every day multi...

hngjared

Does anyone know how to block an IP address or limit connections for a user on a hotspot before they authenticate? I've tried the below Limit connections on hotspot pre-authentication: /ip firewall filter add action=add-src-to-address-list address-list="Black List" \ address-list-timeout=2...

hngjared

I understand how to apply connection limits to a users with address lists in the hotspot user profile.

Anyone help with connection limits to users prior to authenticating in the hotspot?

Thanks!

hngjared

Anybody have any insight on this?

Seems a little odd that a weather app can take down a network controller...

hngjared

I have some 450g's in the field and every now and then the CPU will jump up to 100% until I locate the culprit and block their access. When I look in the firewall connections tab I see users that are continually reaching out scanning ports behind the firewall trying to reach specific IP addresses. T...

hngjared

rextended: I appreciate the response. Do you know if there's a way to accomplish this locally? I have a script that runs every minute on the routerboard and when the CPU levels reache a certain threshold I have it send out a notification email. What I'm looking to do is get the output from the comma...

hngjared

I'm having problems with some boards and their CPU.

Is there any way to run the /tool profile and dump the text file in a script?

I'd like to send this off in an email. My only problem is getting the profile to run and dump the text for me.

Any help would be really appreciated.

Thanks!

hngjared

I got this working.

I'll update with the resolution later in hopes that it helps someone else in the future.

hngjared

CelticComms, I appreciate the reply. Can you just give me a quick rundown? I'd write a book if I explained what I've tried. My APs that I'm using only have 1 ethernet port. Does the mgmt vlan get applied to the ether interface with vlan 10 and 20? Do I need to create a third virtual AP and bridge it...

hngjared

I'm having a really hard time monitoring and accessing my equipment. I have 2 virtual APs bridge with VLANs that are applied to the ethernet interface. Both APs receive POE power from a 750UP that is acting only as a bridge. I created a "trunk port" to the 2nd 750UP where both vlan interfa...

hngjared

I threw together a basic Image. http://i58.tinypic.com/1625uft.jpg I'm coming in through gateway B from a remote location on a public IP address. Looking at hw to access AP? Again the VLANs on the AP are both set to the ethernet interface. 2 VAPs were created along with 2 bridges. The VAP and their ...

hngjared

Thanks for the responses. I'm trying to access the equipment remotely off site via NAT. Below is my configs for the AP and POE. 750 /interface bridge add admin-mac=D4:CA:6D:D1:A0:59 ageing-time=5m arp=enabled auto-mac=no \ disabled=no forward-delay=15s l2mtu=1594 max-message-age=20s mtu=1500 \ name=...

hngjared

I'm currently setting up a wireless network and need 2 seperate VLANs to route to 2 different gateways. I believe I have the VLANs set coorectly but am having problems with the managment vlan to administrate the network devices. Below is my setup. I have an AP with 2 virtual APs applied to the WLAN....

hngjared

I've been working with MikroTik and it sounds like they've found the problem to the memory leak and will be addressed in the upcoming RouterOS release.

hngjared

I agree with Phalanx00.

This is a great option but when you have hundreds of networks it would be nice to know where the emails are coming from aside from looking in the email header.

Has there been any improvements to this?

hngjared

It looks top be specific to APs. I've tried everything and they continue to reboot. Each reboot has a critical error of: 05:46:43 - System rebooted because of kernel failure 05:46:43 - Out of memory condition was detected 05:46:43 - router was rebooted without proper shutdown I'm trying to get Mikro...

hngjared

n21roadie, I appreciate you taking the time to answer my posts. I've narrowed down the problem and maybe you have an answer. The problem is that the log files are writing to the memory and over time it builds up to the point where the radios are rebooting when there isn't sufficient memory. These ar...

hngjared

I'd like to use dynamic DNS and create a hyperlink for our support that would automatically log them into the webfig of the routerOS.

Something like http://X.X.X.X/login:admin/password:admin

Is that something that can be done through MikroTik for access into Webfig?

Thank you!

hngjared

Yes, I'm monitoring the memory through the resource graphing from within the routerOS. I turned on email notifications after reboots and started finding I was getting reboots from equipment all over the place on seperate networks. I'm trying to gather supout files for MikroTik support but it's hard ...

hngjared

I have a problem where my APs gradually consume all the memory and reboot.

Is there any way of writing a script to clear the memory so I don't have to schedule reboots in the early morning every couple days?

Any help would be greatly appreciated until MikroTik fixes their sh*t.

Thanks!

hngjared

I know someone out there can steer me in the right direction.

hngjared

I'm trying to set an AP to have untagged traffic with tagged traffic. The tags all work fine for me. I created 2 VLAN (vlan 10 and vlan 20) interfaces and applied them to ether1 interface. I then created two virtual APs (wlan 2 and wlan 3) and created seperate bridges for the virtual ap and each vla...

hngjared

MikroTik,

Anything?

There's been 4 updated OS versions and none have addressed this issue.

WTD?!

hngjared

The TX rates in the host and active lists for the hotspot are not shown with 6.0rc11 - 14.

Any fixes available or is there a setting that has been added?

Thanks!

hngjared

Miahac, Did you have success with OS V6x? I am having the same problem where our 1100AHx2 is rebooting with error message "kernel failure" This is in a high traffic property where we are running multiple queues within a hotspot. I would like to know whether I will make things worse with an...

hngjared

I'm away from the office and test laptops but I have one with me; Gateway. Wireless: Realtek RTL8192SE Wireless LAN 802.11n PCI-E NIC. All the power saving options are affected. Only way it works is if it is set to "Maximum Performance". Also, I have a Lenovo with a Atheros AR9285 that wor...

hngjared

I have issues with different laptops that are using power saving modes being unable to use the wifi from the MikroTik APs. I don't have any problems with Ruckus, Dlink or Panoptic. Is there any way MikroTik can fix this?! This is very inconvenient as the majority of laptops come pre-configured with ...

hngjared

Not sure if my top post was clear. I have some laptops that work and others that don't. When the laptop is not plugged into a power source it is unable to transfer data through the MikroTik. In the MikroTik AP everything looks good. Solid SNR with a 90-100 CCQ. The packet loss is really high though....

hngjared

I have a problem with intermittent packet loss when connected to this AP. I found that when my laptop's power is plugged into a wall outlet everything works fine. If my laptop is running off battery and the wifi power adapter settings is on anything but maximum performance the connection drops left ...

hngjared

We don't allow 2 IP's per MAC because our monitoring servers when touching the equipment are for some reason pulling the DGW address and this takes all of our equipment offline untill the DGW address is removed from the host list. I found that DHCP leases renew after 50% of the lease if the user is ...

hngjared

Morpheus,

I have the same issue. Were you able to find a resolution?

Thanks!

hngjared

Would someone be kind enough to explain the DHCP process for me? When is lease renewed? Are address taken from the pool in sequential order or does it always pull addresses from the top/bottom or random? Is there a way to delete the dhcp lease when a user idle times out? Can a lease be renewed if so...

hngjared

Apparently the router board just needed a reboot after uploading the new router OS.

Everything looks to be functioning normal again.

Thanks,

hngjared

I upgraded and ever since I'm having issues reaching equipment set up through NAT in the firewall.

Also, I use a program tcping that no longer functions with the new OS.

Is there any way of downgrading back to v5.20?

Thanks

hngjared

Thanks for the reply kev.

I ended up just bridging all 5 ports and setting up each ethernet interface with Horizon.

Worked like a charm!

hngjared

I'm currently looking to use the MikroTik RB750UP as a POE switch.

I'd like to try and set up something similar to port based vlan.

Is there anyway to separate the ports without using vlan id's?

Thanks!

hngjared

I had the DHCP addressing applied to the bridge instead of the VLAN interface.

Once I switched them everything started working.

Still a little confused how the other AP was able to work though.

hngjared

Thanks for the prompt response. Gateway settings are listed below. When I use a different AP from a different manufacturer everything works great. Which lead me to believe it was a problem with my configuration on the AP. # software id = 7DB5-G7W0 # /interface bridge add admin-mac=00:00:00:00:00:00 ...

hngjared

I'm currently trying to configure a MikroTik RB711UA with multiple virtual APs running off of separate VLANs. I have a MikroTik 450G as the gateway. I have the VLANs configured on the bridge and I applied a hotspot to each VLAN. I'm trying to direct users connecting to different SSIDs to a specific ...

hngjared

I was looking for a way to make a 411U AP into a router. I would like for it to have it's own Hotspot and DHCP server. However, beings the wireless and ethernet port are bridged I receive my DHCP address from the main router 450G. When the wireless and ethernet are not bridged I am unable to get out...

hngjared

Hi everyone, I have a MikroTik RB450G as a gateway and a MikroTik RB411u as an access point. Ethernet 1 on the 450G is connected to the internet and ports 2-5 are in a bridge which the AP is connected to. I would like to set the AP up with multiple SSID's and direct users to different hotspots. VLAN...

hngjared

I currently have a MikroTik set up with 2 different WAN interfaces and 2 different Hotspots. I'm using 2 public addresses from the same subnet. What I'm trying to do is route traffic from Hotspot1 out through WAN1 and hotspot2 through WAN2. I have 2 seperate bridges with 2 sepearate DHCP pools. Ever...

hngjared

Thanks for the information! Everything works great when authentication is disabled. I have two seperate Hotspots going through 2 seperate WANs. When authntication is on, Hotspot1 works flawlessly going out through DGW1. When I plug into Hotspot2 with authentication on I can see in the Radius server ...

Search found 78 matches