hello guys,

i cannot see the prefix count received on bgp peer as before, maybe there is a way to see them, but i haven't found info, i see only in peer cache prefix count "0".

thanks a lot
Giulio

hello, i have a strange problem on a rb2011 and some other 2011, my setup is ospf with loopback and 2500 routes, mpls enable and vpls. all its working as expected except that sometimes the rb 2011 routing process spikes ti 100% and 1 or 2 packet timeout. is i disable ldp/mpls all return to normal. i...

hello, i'm using ros 6.36 on ccr 1036 and the other end there is a 2011 uias-rm with ros 6.25. the ospf state are 50 down in 1 day but no connettivity lost. ldp seems ok no down.


let me know if you need more info.

BR

hello, i have a strange problem on a bgp/vpls tunnel. the link is directly connected via a 2.4ghz wireless link that works very well. sometimes when i see the vpls status the link down increment but in pratice no users down because the down is 1sec or minus. the vpls mtu is 1508 and the mpls is 1600...

hello, i hope you can help me with this problem. i have a ccr 1036 configured to run: ospf firewall nat 1000 eoip tunnel in a bridge and some vpls after a randomic time the ccr stop workingin a strange way for example i can see the ccr from neighbor but i cannot login via mac-telnet the ospf con up ...

hallo, i want to introduce in my network a bgp RR backup router to made a backup for all vpls-bgp tunnel. actually i have only 1 router that is a bgp rr and terminate al vpls tunnel. if this router go down all vpls tunnel can't go anywhere. it is possible to designate a RR backup bring another bgp s...

hello, i have configured my 450 to do LB with ecmp. i want to check if a connection is not work and i apply suggestions found on this forum: Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-...

hi guys, anyone know when this feature will be available on ccr? i cannot setup a link forcing 1000 full duplex without autoneg.

Thanks

what detail you need? i can send it to you if you have the time to help me.

Thanks a lot

thanks for reply, but i have not set the infinite cost..then i cannot understand why are installed as infinite, infact the same route is infinite on ccr and normal(cost 110) on cisco. what i want to understand: is normal to have this inifinite route or is an error on architecture or some other bugs?...

hi guys, i have a problem about some route installing in ospf as infinite cost. to let you help me much better i'm attaching the network architecture. all link are point-to-point ospf and are /30 network. pppoe server redistribute with internet2 all pppoe dynamic interface installed as ext1(all ok) ...

hi all, i was able to move a dude server 3.6 from a windows 2003 x64 to windows 2008 r2 copying the data folder. now i'm starting to test dude 4.3b3 upgrade. then after install the .exe it i was able to view the .dat db file converting to .db. but when i start the client and try to connect to the se...

thanks a lot for your advice i will try the solution and i let you know the results

BR

hi,
thanks for reply!!

indeed you solution will cover layer2 redundancy but if i have an ip address on the bridge and 1 of the ccr goes down?(the 1 with the ip in the bridge interface) how i can accomplish the l3 redundancy? with vrrp?

thanks again

hi guys, i want to achieve a redundant tunnel configuration from a router to 2 different mikrotik ccr-1036 in my datacenter. in other words i have 1 2011 that aggregate some wireless link, this router estabilish an eoip tunnel with my datacenter trough the wireless network, and finally goes to the i...

hi Guys, after some analysis i have solved the problem. let me explain: my dude service is a windows 2003 x64 1,5gb ram (sphere VM) the server is in a domain and have remote desktop enabled. normally dude open a socket on 2210 tcp and 2211 tcp(both also udp) when a user connect from a remote network...

hi guys, i have a strange problem with the dude. when i try to connect remotely from a client, suddenly it reject my authentication... If i restart service or reboot the windows server it working correct... also when i log on locally on the windows server 2003 where dude is installed and try to logi...

hi it is simple. you need to create a point to point subnet /30(public or private) to customer router and then via static route or via dynamic routing you can subnet the entire public network annuced by your bgp router,

hope this help

hi guys,

i need to do a nat masquerade with a public ip residing on a loopback interface because this router do not have any other public ip address. i have tried to perform a nat with loopback interface but it doesn't work. perhaps i have misunderstood something.

Thanks

thank you so much

no one has some advice?

use bgp as path prepend to prefer a path on inbound

hi , i have 5 interfaces and 4 are enabled on simple queue with ethernet-default. then yes it is enable

hi guys, i have a strange problem on my ospf topology. i have 3 router connected with 3 different /30 subnets i have activated ospf and i have announced the /30 network plus 1 /24 all router see their neighbors correctly and are full state but every 2 minutes i receive this error: discarding packet:...