I think yes it can be done. When the connection is disconnected, the latest data remains in /system gps, unless the router has been rebooted. You can take it from there with a script and save it in a variable/file or ip firewall layer7. When the connection appears, you can transfer them. But what '...
Hi! I tried setting up the bandwidth-based load balancing of Mr. Tomas Kirnak but was not successful. Can any you guys comment on the approach? I have 2 adsl provider both with dynamic ip. Connection is via dhcp client.
Hi! One of my RB750GL is experiencing this issue also. Have tried reset to factory setting just to be sure my settings were not the culprit. I get timeouts every 4 or 6 successful pings. Very weird as my RB450G experienced this for less than 48hours. Its been running smoothly since. Update: Tried se...
Do you have a loop on your network, either on the MT or on the other side of the eoip tunnel? Hi! None that I know of. I have tried disabling the tunnel. Very weird though that after disabling the usage of master ports of ether3-5 to ether2, and reverting back to bridging all ports. The problem see...
Hi! I posted a new topic about weird instability of ethernet ports a while ago. It is the same problem as this. So far, it started when I declared a master port for ether2 for ether3-5. When I noticed it, I tried reverting back to my previous setup which was to bridge all ethernet ports and undeclar...
Hi! Has anyone else experience intermittent connection from all ethernet ports? I am using RB450G, recently upgraded to 5.17. I checked all my cables and they all seems to have good contacts. Prior to noticing the problem, I set ether2 into master port for ether3-5. Current bridge setup is ether2 an...
Hi! I tested this script to work on RB450G with 5.17. However, just wanted to clarify whether we need to specify the gateway interface for this to be more effective. Because in my previous script, the gateway interface was specified. Thanks.
Hi! do we have updates for probable fix for SNMP reporting? I would really prefer using the dude. I have upgraded and factory reset my equipment with the same problems. Thanks.