MikroTik

Atentaduh

Dear The Dude Forum

Is it possible to monitor a https webserver?

this is for the http version
HEAD / HTTP/1.0\r\n\r\n

^HTTP/1\\.

can it be changed to https?

Atentaduh

Well, if you say that it throttles "one direction", what happened when you swapped the roles of the ports? Was it always throttling port A -> port B or always the other RouterBoard -> the PC regardless whether port A was connected to the PC or to the other RouterBoard? Hey sindy, Doesnt m...

Atentaduh

I would start from the default configuration in steps. Create a single bridge with hw-offload, vlan-filtering=no , insert the machine "into" an already existing trunk connection. If it works fine, configure vlan filtering rules permitting all vlans actually used on that trunk and activate...

Atentaduh

I Apreciate your reply guys. i'm not even running bonding interface anymore... just a single interface... eth1 as trunk interface.. and the mngt-vlan is now on the bridge as well i've already read all those manuals and articles about the CRS! thanks tho hw-offload gave me worst performance! i know ....

Atentaduh

I'm having trouble with HW-Offload ! when i set it to on i got a lot a overruns on the trunk interface and low throughput! when i set to off i got no overruns and the throughput is way better! but the cpu load is way higher! can u guys tell me why ? Its supposed to be the other way around right ? Wi...

Atentaduh

The first thing I would suspect is the flow control. As it is used rarely, it may have got silently broken. And when it works properly, it has the bad habit of pushing peripheral problems to the core - a slow destination cannot handle incoming packets so it says "stop sending", and thus t...

Atentaduh

I use the same switch, you can't be configuring it correctly. I get wire speed switching. Post a export of your configuration. Sent from my SM-A520W using Tapatalk Thanks for you reply Heres the config. /interface bridge add name=bridge-vlans priority=0x20 vlan-filtering=yes /interface ethernet set...

Atentaduh

This what happens when i run some btest from the devices to the rb1100 through the switch MT Devices ===>CRS326====>RB1100Dx4 (upload) Works nicely!! 8 devices could reach almost 800Mbps, but the other way around just sucks RB1100Dx4====>CRS326====>MT Devices (Download) I cant reach the same amount ...

Atentaduh

Hi! I bought a CSS326-24G-2S + RM and it was just a bad joke! i couldnt barely push over 100Mbps on the switch! and some freezes from time to time Then i bought a CRS326-24G-2S+RM this one wont freezes at least! but the performance is bad! Heres what happens... On both cases the switch was connected...

Atentaduh

Well here we go again, i got a brand new CRS326-24G-2S+ and the same problem with overruns!!! The performance just sucks, before the crs i was using a cheap switch with 8 ports and was doing GREAT! idk if im doing something wrong! can someone help me i'm running the lastest version 6.42.1 RouterOS B...

Atentaduh

I was able to reduce the rx-drop over 90%!! by disabling the SNMP service!!

wtf

Atentaduh

Greetings, i noticed a lot of rx-drops on some interfaces on my routerboard 1100Dx4. this board is running ospf, about 370 pppoe sessions RouterOs and firmware v6.42.1 cpu load under 30%(default clock) interfaces running with only-hardware-only queue type traffic between 70Mbps and 400Mbps (rx-drops...

Atentaduh

Hi guys, i've been working with mikrotik for quite a while.. and i never ever could see good results with nv2 seriously and i was so excited when i read the patch notes. so i give it a try with nv2 again and the same thing... high ping low troughput even 802.11 works better NSTREME works way better...

Atentaduh

Hi guys, i've been working with mikrotik for quite a while.. and i never ever could see good results with nv2 seriously and i was so excited when i read the patch notes. so i give it a try with nv2 again and the same thing... high ping low troughput even 802.11 works better NSTREME works way better ...

Atentaduh

Hardware support is given, but Software is not capable auf WAVE 2.

Mikrotik has a lot of problems with this new devices, we are waiting for Spectral Scan on 802.11ac for 4 years, I don’t can tell you how long it will take to see Wave 2 Support in ROS

Thanks for your reply. thats sad

Atentaduh

Possible yes, but Mikrotik doesn’t support WAVE 2 now Oh boy i though the new devices with IPQ-4018 cpu had mu-mimo https://www.qualcomm.com/products/ipq4018 for example https://mikrotik.com/product/sxtsq_5_ac with a licence upgrade could be used as a AP-Bridge am i wrong then, those devices actual...

Atentaduh

Greetings I`m wondering if the new ac wave 2 can improve my network by just changing all the AP devices. Lets say i've several devices (sxt lite 5 802.11N ) connected to some AP running 802.11-N (su-mimo) IF i change the ap to the new ac wave 2 running with 802.11-a/n/ac (mu-mimo) will it improve th...

Atentaduh

I got the same problem! rx-overruns on the trunk port i'm running with the latest version (2.7) Example: The trunk port is running at 1G full duplex connected to a RB1100Dx4 i'm connected direct to a random port running at 100Mbps if i ran a btest from another device on a different port running at 1...

Atentaduh

I just want you guys to know the CCR1009 just solved the problem. every single core works!

Atentaduh

From Firewall / Connections / Tracking set TCP Established Timeout to something small, like 5 minutes to at least drop connections that aren't doing anything. This will not effect active connections. Does this help? Yes it helped, the core is running around 94%. still only core 1 running tho. a bra...

Atentaduh

Well as predicted the SINGLE CORE had achiev 100% usage i'm so dissapointed with this routerboard i've 15 rules on firewall filter only. drop bogons list drop invalid conn drop telnet-ssh-dns from wan on nat tab masquerade wan 1, wan 2, wan 3 some dst nat mangle tab only routing mark for wan2 and wan3

Atentaduh

Should be like this.. right ?

Atentaduh

Hey Kindis I was so excited when i read it, but didnt work Thanks for your reply tho Show us /tool profile This way we can see what is using the CPU core. Sure This is weird. I was hopping to find one process eating almost all CPU. Instead I found 4 or 5 processes, using only one core. 1) Your fire...

Atentaduh

Hey Kindis

I was so excited when i read it, but didnt work

Thanks for your reply tho
Show us /tool profile

This way we can see what is using the CPU core.

Sure

Atentaduh

You should try 6.41 (https://forum.mikrotik.com/viewtopic.php?f=21&t=128915) What's new in 6.41 (2017-Dec-22 11:55): *) arm - minor improvements on CPU load distribution for RB1100 series devices Might solve this issue for you. Hey Kindis I was so excited when i read it, but didnt work Thanks f...

Atentaduh

Depends on the tasks and processes running. Make more queues or other things, it will start to use other cores. Hey Normis, They work! i`ve seen with dude running. i was just hoping for more, i mean in a few months i`ll have to upgrade again with my routerboard running with 90% usage on core "...

Atentaduh

Hi,

I got a brand new RB1100Dh4 a few days ago, I`ve noticed that shes running with only one core at 40~80% while the others are at 0~1% usage

i had a RB750G3 before and using all 4 cores doing the same job.

the RPS feature is enabled on all interfaces "came disabled by default"

Atentaduh

Theoretical best would be 50% of the data rate. It has been my experience that real world yields 35-40% of the data rate for a PtP. It depends on the environment. I have seen rare instances of interference causing lower than expected throughput that had high and stable data rates and ccq. If you te...

Atentaduh

What CPU load do you have on NetMetals and 3011 during Btest? What happens with TCP results if you change channel width to 40 MHz? Are you testing it with one TCP session or more? CPU load on RB3011 reached 46% and NetMetal 69% my results with different channel width 20Mhz = 130Mbps 40Mhz = 200Mbps...

Atentaduh

I tried with -55, but the data rate starts to drop. my current TX power is 22dbm on both sides

But even with this signal the ccq is running at 100%
It should be able to reach it's full potential right?

I'm actually wondering if someone has achieved over 500mbps

Atentaduh

I`m running the btest from a RB3011 to another

Atentaduh

Greetings Im going straight to the point I have a ptp wireless link with a pair of NetMetal 5 and shielded antenna running with Solid 100%/100% CCQ 866/866Mbps Data Rate But i cant even reach 400Mbps My results are NSTREME = 250Mbps TCP and UDP NV2 = 210Mbps TCP and UDP 802.11 = 240Mbps TCP 330Mbps ...

Search found 32 matches

Re: Probe Thread

Re: Switch with low performance!

Re: Switch with low performance!

Re: Switch with low performance!

Re: Switch with low performance!

Re: Switch with low performance!

Re: Switch with low performance!

Re: Switch with low performance!

Switch with low performance!

Re: Overruns on CSS326-24G-2S+RM

Re: RX-Drops on RB1100Dx4

RX-Drops on RB1100Dx4

Re: Significant improvement for wireless Nv2 PtMP

Re: Significant improvement for wireless Nv2 PtMP

Re: Question about new ac wave 2

Re: Question about new ac wave 2

Question about new ac wave 2

Re: Overruns on CSS326-24G-2S+RM

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

Re: RB1100Dx4 Multicore issue ?

RB1100Dx4 Multicore issue ?

Re: NetMetal 5 i cant reach 540Mbps

Re: NetMetal 5 i cant reach 540Mbps

Re: NetMetal 5 i cant reach 540Mbps

Re: NetMetal 5 i cant reach 540Mbps

NetMetal 5 i cant reach 540Mbps