MikroTik

tedd77

I am facing the same challenge of @paulavalencia
Could anyone assist ?

tedd77

Hello

It is a pity that I could not find a solution.
I had to rely on third party solution to do the job.
My problem is now temporarily solved.

tedd77

Thank you all, still having the same error Failure: already have such entry I even simplified the code :do { /ip firewall address-list remove [/ip firewall address-list find comment=ipblacklist1] /import file-name=ipblacklist1.rsc; :log info "Removal old ipblacklist1 and add new"; } on-err...

tedd77

Hello
Thank you all for your assistance and interaction.
I still have the same issue

tedd77

Hello, I have some scripts on my router to collect bad IP addresses from multiple files Unfortunately the scripts stop upon error. The error in all cases is that IP already exists . The IP could have been imported from an earlier file. The error displayed in the log : "script error failure alre...

tedd77

I was aware of the protocol but not the compression part. Thank you for pointing that out.
I managed to make the Qnap work however I had to disable the check client certificate on the Mikrotik side.
As for the yeastar I still did not check that out.

tedd77

Hello, I am using Milrotik CCR1036-8G-2S+ where openvpn server is configured. Several Milrotik routers are connected to the CCR using openvp without issues. I am trying to get Qnap TS421 with version 4.3.3 to connect to the CCR using openvpn with not luck I also have to have the Yeastar TG100 GSM ga...

tedd77

Hello, I am trying to use the software however I do not want to print the ticket to a paper. I tried with PDF reader and PDF creator but keep on getting the following error: There was some problem. Ticket was not printed. Could you please provide a workaround ? we need to try before buying the appli...

tedd77

Hello , Could you please share with me the way you built the image and module? I have been trying with no success for couple of days now. I have only built the SDK to compile packages but this should apply (using menuconfig) to anything else. As I played around for quite a while, it might not be as...

tedd77

Hello All, First of all, thanks again liquidcz for the metarouter image. Any chance to see an upgrade to libopenssl ? The provided one is impacted by heartbleed (1.0.1e) and used by OpenVPN. In the meantime I'll try to do it on my side. Thank you Edit: If someone wants it -> https://www.dropbox.com...

tedd77

It looks like you have to switch to other repository or build image/packages yourself as it seems that either mirror is down or packages pulled, or packages has never been there. Unfortunately failed to build , on attitude adjustment 12.09 as well as Barrier breaker 14.07 I am getting after a long ...

tedd77

It looks like you have to switch to other repository or build image/packages yourself as it seems that either mirror is down or packages pulled, or packages has never been there.

Thank you, I am rebuilding my own version..

tedd77

Hello I would like to check if anyone was able to overcome this message (asterisk-gui_2.1.0-rc1_mr-mips.ipk unable to install) Installing asterisk-gui (2.1.0-rc1) to root... Downloading http://openwrt.wk.cz/attitude_adjustment/mr-mips/packages/asterisk-gui_2.1.0-rc1_mr-mips.ipk. Collected errors: * ...

tedd77

Mainly this post is addressed to Nathan and liquidcz Is there a possibility to add to Nathan's openwrt asterisk the firewall fail2ban ? The reason is that we are getting lots of attack attempts from the internet, with fail2ban firewall we could subscribe (freely) to networksystemssolution.info all a...

tedd77

Please specify if you are able to establish a VPN using a WIFI instead of a 3G connection. Please note that there are many 3G operators having VPN denial, call your operator to check if VPN is allowed. Once you send me further info I will try and help you with the settings. in the meantime please in...

tedd77

Hello, I have been trying to find a solution to authenticate an IPHONE using IPSEC. I am using a Mikrotik RB493G with OS 6.0 , upgraded that to 6.1 still unable to see it work. On WINBOX I cannot see the auth-method=pre-shared-key-xauth , when i set that from terminal it accepts it however it is mar...

tedd77

Problem with routing on rc13. need to hard reboot RB493G many times prior to getting back to work.
how can I get rc12 , it was working better.

tedd77

I have gone through the post for IPSEC/L2TP "Connecting iPhone to Mikrotik" I have an issue where I cannot connect from the Internet to my RB493G. If I change the "In interface" to be the Lan where my wifi is connected then I can connect. To make it clear. I have a lan interface ...

tedd77

Yes there is a solution ,
1. you will need to backup the following files: dahdi_guiread.conf, dahdi_scan.conf and http.conf to a directory say "etc/astbkp/
2. Create a script to restore these files everytime the router is rebooted.

enjoy!

tedd77

Hello , The issue is solved now, there was nothing to do with the router. I had to WIRESHARK the traffic going out of the IPHONE. The IPHONE was sending a TOS that was not understood by the router, when I set that to zero ,in the IPHONE software, everything worked perfectly. I could not find the TOS...

tedd77

Hello, I got this router a week back, it is working perfectly fine except for one problem I have been trying to solve for couple of days now. The problem is that I am unable to place voip calls using my iphone, I am having NAT issues only with iphone. If I use grandstream or siemens all work fine. T...

tedd77

Hello, I have a similar situation where I only need certain IP from my network to go over the VPN and the rest to go over the regular internet connection. My lan network is 192.168.88.0/24 My VPN client interface name is : pptp_out I needed 192.168.88.20/24 and 192.168.88.250/24 to go over the VPN. ...

tedd77

@@Nathan I respect your suggestion, I will not post things that are not related to Metarouter however being talking about asterisk and solutions to make it more stable on Metarouter (The subject) some of the commands posted by me about crontab were not correct. Just need to correct the command to re...

tedd77

Nathan,

It is not! The command to make it restart every 3 hours is : */180 * * * * /etc/init.d/asterisk restart
this will force the asterisk to restart every 180 minutes = 3 hours, what I am looking for is to restart the asterisk say at 12:00 AM every day.

---Tedd

tedd77

Nathan, 1. I have done further testings with a proper solution, I am now very confident with the script change I made. Need to make a file that copies the 3 files back to the asterisk folder. place the command at the beginning of /etc/init.d/asterisk file 2. It seems that my suggestion is fine, you ...

tedd77

I have a workaround solution for the first 2 problems. 1. Should the GUI fails to start after a power failure on the MIKROTIK, check the following files : dahdi_guiread.conf dahdi_scan.conf http.conf If the problem is there these files will have 0 byte , you need to restore these files and restart a...

tedd77

Nathan I have the following issues on Metarouter , with asterisk GUI. 1. Should I recycle power to RB450G , my GUI becomes out of reach, on the other hand if I halt the asterisk and then recycle power then no problems. When power is cycled the GUI stops working , SIP extensions are fine, asterisk -r...

tedd77

Solution to delete voltage.ko in order to solve constant reboot of RB450G with Metarouter asterisk image Netboot RB450G using the following image http://wiki.hwmn.org/downloads/routerboardlinux You will need to add extension elf to the (routerboardlinux) file downloaded from (http://wiki.hwmn.org/do...

tedd77

The problem is that I am unable to see the NAND related devices.
Unless I see those mount is impossible.

tedd77

Thank you for your prompt help, this is better however I still cannot see the NAND. if I do cat /proc/mtd I can see the following: dev: size erasesize name mtd0: 0000b000 00001000 "routerboot" mtd1: 00001000 00001000 "hard_config" mtd2: 00002000 00001000 "bios" mtd3: 00...

tedd77

Thank you but that does not help as I need a backdoor to my mikrotik OS in order to delete the voltage.ko . your firmware is to turn the RB into an openwrt.
Unfortunately the image I found cannot detect my NAND hence unable to mount and delete the desired file.
Any help ?

tedd77

I found an image that could netboot my RB450G (http://www.practicaltester.com/store/en ... tramfs.elf) , I am now in the search of voltage.ko .
It would be great if you could provide me with its location.

tedd77

In order to netboot I need the correct file to place into my tftpboot directory.
I searched for the backfire 10.03.xx none of the files is of elf type, could you please let me know which file to choose?
http://downloads.openwrt.org/backfire/10.03/rb532/

tedd77

I have looked and could not figure out a solution. is the problem the power supply or deleting the voltage.ko ? if deleting the voltage.ko how to do that? procedure?
thank you.

tedd77

I am trying to run metarouter with an image having asterisk on it. my router is RB450G (firmware 2.41 and router os 5.19) Unfortunately once the Metarouter image is enabled the RB starts to reboot every 30 seconds. The memory allocated (32 then tried 64) same problem. Same image was used on RB493G h...

tedd77

Sorry MIPSBE

tedd77

Thank you Nathan, I would like to try the MIPSE image.

tedd77

Hello Nathan,

could you please send me the asterisk gui for 1.8 package?

Thank you.

Tedd

tedd77

Hello , I am wondering if someone could solve the problem of 1 way voice on the Mikrotik for neuvotech. please post the solution. thank you

Search found 39 matches

Re: RouterSCRIPTS - A collection of scripts for RouterBOARD devices

Re: script stop on error

Re: script stop on error

Re: script stop on error

script stop on error

Re: OpenVPN with QNAP and Yeastar

OpenVPN with QNAP and Yeastar

Re: Infinitel HotSpotWeb - Easily generate/print users from any web browser (Available download)

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Connecting iPhone to mikrotik vpn error!

Re: Can't configure routeros as xauth responder

Re: RouterOS v6.0rc13 released

Re: Connecting iPhone to mikrotik vpn error!

Re: Metarouter images

Re: RB2011UAS-2HnD-IN Questions Topic

Re: RB2011UAS-2HnD-IN Questions Topic

Re: Selective VPN tunnel

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Metarouter images

Re: Multiple Questions RB750