Community discussions

Search found 32 matches

by Devin
Fri Mar 15, 2013 3:45 pm
Forum: General
Topic: RC12 Latency/Packet Loss Still
Replies: 5
Views: 2352

Re: RC12 Latency/Packet Loss Still

http://i.imgur.com/4CrkIWn.png Im running rc11 on it still because the latency is better and there isnt alot of packet loss(<.02%). I cant really see the degrading of performance even though it shows 96689 tx loss on ether1 but that is out of 582157176 total tx packets which is 0.0166% packet loss.
by Devin
Thu Mar 14, 2013 9:09 pm
Forum: General
Topic: RC12 Latency/Packet Loss Still
Replies: 5
Views: 2352

Re: RC12 Latency/Packet Loss Still

Image
by Devin
Tue Mar 12, 2013 4:06 pm
Forum: General
Topic: RC12 Latency/Packet Loss Still
Replies: 5
Views: 2352

Re: RC12 Latency/Packet Loss Still

http://i.imgur.com/h6imF5q.png Here is a pic of the new interface for sfp in rc12. It all looks good, but still drops packets and has normal latency of .200-.300 latency with every few seconds spikes of 100ms or higher some complete loss. http://i.imgur.com/JCeRhvP.png I don't know if when the grap...
by Devin
Tue Mar 12, 2013 3:57 pm
Forum: General
Topic: RC12 Latency/Packet Loss Still
Replies: 5
Views: 2352

RC12 Latency/Packet Loss Still

Still having packet loss and unstable latency on sfp ports on CCR with RC12
by Devin
Tue Mar 05, 2013 9:33 pm
Forum: Forwarding Protocols
Topic: BGP Question 2 ISPs 2 Locations 1 Allocation
Replies: 6
Views: 3531

Re: BGP Question 2 ISPs 2 Locations 1 Allocation

This will be first time for me setting up BGP with 2 peers, but on two separate networks(locations). Here is a diagram of what I have, and what I am trying to accomplish.(these are dummy ips of coarse) Is this even possible to do this? Or am I on the right track? You are on the right track. The mai...
by Devin
Mon Mar 04, 2013 10:30 pm
Forum: Forwarding Protocols
Topic: BGP Question 2 ISPs 2 Locations 1 Allocation
Replies: 6
Views: 3531

BGP Question 2 ISPs 2 Locations 1 Allocation

This will be first time for me setting up BGP with 2 peers, but on two separate networks(locations). Here is a diagram of what I have, and what I am trying to accomplish.(these are dummy ips of coarse)
Image

Is this even possible to do this? Or am I on the right track?
by Devin
Thu Feb 07, 2013 4:23 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

Re: OSPF causing a lot of traffic on WAN interface

Right now it is currently set up as static routes 2 /23s and /27 to me. That makes sense so should I just statically route everything in my main router as backup in case the link stops working? Edit: would this be the best solution because in about 2 months we will be putting bgp into use when arin ...
by Devin
Wed Feb 06, 2013 3:44 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

Re: OSPF causing a lot of traffic on WAN interface

I suggest looking at your routing and NAT entries to unravel this. If external clients are sending DNS queries to your IP range and your internal route to those IPs is down then you *might* be sending the traffic back out to your ISP who promptly sends it back to you giving the appearance of heavy ...
by Devin
Tue Feb 05, 2013 6:13 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

Re: OSPF causing a lot of traffic on WAN interface

Image
http://i.imgur.com/co1wxmI.png

Here is a picture of the capture. It seems that someone is looking up ripe.net on all my addresses like I originally stated, but the traffic increases when the link goes down.
by Devin
Tue Feb 05, 2013 5:51 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

Re: OSPF causing a lot of traffic on WAN interface

There are actually multiple IPs showing on both sides - both your IPs and external. Not really enough information to know what is going on, but assuming that you do actually run DNS services which are accessed from external addresses (i.e. DNS services for sites you are hosting etc.) check that whe...
by Devin
Tue Feb 05, 2013 5:08 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

Re: OSPF causing a lot of traffic on WAN interface

I'm not sure that I follow your question. The traffic in the graphic is DNS lookups which are failing - note the zero rx rate. Yes, the traffic is coming from 1 ip addess to multiple ip addresses when the link is down. It only happens when I break a link in the ospf area. I block multiple dns respo...
by Devin
Sun Feb 03, 2013 9:18 pm
Forum: Forwarding Protocols
Topic: OSPF causing a lot of traffic on WAN interface
Replies: 9
Views: 2159

OSPF causing a lot of traffic on WAN interface

Why when a link goes down within the domain for OSPF to broadcast outside the network domain? What it seems like every ip address within my network starts transmitting out a LOT of packets. What I noticed was around 7k pps per IP address. It happens when a link goes offline. Its just wierd I can rec...
by Devin
Sat Feb 02, 2013 7:46 am
Forum: General
Topic: Winbox for android, when?
Replies: 52
Views: 50499

Re: Winbox for android, when?

https://play.google.com/store/apps/details?id=wolfen.DroidWinBoxPro&hl=en This right here has limited functionality, but for what I would use it for on my phone it is good for viewing information. I would probably never use my phone to make changes to production routes because touch screen phones su...
by Devin
Sat Feb 02, 2013 7:39 am
Forum: Forwarding Protocols
Topic: OSPF question on a routed network stop failover.
Replies: 1
Views: 756

OSPF question on a routed network stop failover.

http://i.imgur.com/GJty7Db.png http://i.imgur.com/GJty7Db.png Here is a diagram dumbed down to what I really need to know. I have 3 areas here what I thought was the correct way todo this. A1- 0.0.96.45 distributes default route within A1 A2(interconnect between the networks)- 0.0.21.98 connects A1...
by Devin
Fri Feb 01, 2013 4:52 pm
Forum: General
Topic: Some Issues I am seeing with rc7
Replies: 2
Views: 788

Re: Some Issues I am seeing with rc7

Try RC8 http://www.mikrotik.com/download/share/ ... 6.0rc8.npk

RC8
*) do not count packets for unknown protocols as rx_dropped;
Tx Drops seems to have stopped, but using address lists in NAT to masquerade still doesnt work.
by Devin
Thu Jan 31, 2013 7:38 pm
Forum: General
Topic: Some Issues I am seeing with rc7
Replies: 2
Views: 788

Some Issues I am seeing with rc7

I am seeing Tx Drops on all interfaces. http://i.imgur.com/jvAPOmW.png I am also getting packet loss due to the drops. I am seeing this packet loss only on rc7 if I downgrade the device everything is ok. I wont see any packet loss on v5.22. Packet loss is around 3-5% happens every few minutes drops ...
by Devin
Fri Jan 18, 2013 5:58 pm
Forum: General
Topic: Generic QoS/Traffic Prioritization Question
Replies: 1
Views: 609

Generic QoS/Traffic Prioritization Question

I understand the concept of QoS that you should queue customers upload closest to the customer(on cpe) and download(closest to the circuit). I have been experimenting with doing some Traffic Prioritization throughout my network. What is the answer for "best practice", Should you put QoS(Traffic Prio...
by Devin
Fri Jan 18, 2013 5:33 pm
Forum: Scripting
Topic: ARP Watch Script
Replies: 2
Views: 2651

Re: ARP Watch Script

Does anyone have any problems using this script?
by Devin
Fri Jan 04, 2013 8:03 pm
Forum: Scripting
Topic: ARP Watch Script
Replies: 2
Views: 2651

ARP Watch Script

:local ipaddr; :local macaddr; :local iface; :local macoui; :local macnotfound; :local ipnotfound; :local oldmac; :local oldip; /ip arp :foreach i in=[ /ip arp find ] do={ :set ipaddr [get $i address] :set macaddr [get $i mac-address] :set iface [get $i interface] :if ([/ip firewall address-list fi...
by Devin
Sun Nov 04, 2012 5:34 pm
Forum: Forwarding Protocols
Topic: Suggestion: Primary Address for each interface
Replies: 5
Views: 1999

Re: Suggestion: Primary Address for each interface

What is the benefit of this? You can always src-nat the outgoing traffic to whatever you want, anyway.
Yea but would it not be just easier to click or set a Ip address as the primary address...
by Devin
Fri Nov 02, 2012 10:06 pm
Forum: Forwarding Protocols
Topic: Suggestion: Primary Address for each interface
Replies: 5
Views: 1999

Suggestion: Primary Address for each interface

In IP -> Addresses, you may or may not have multiple Addresses on a single interface. The first ip address is always the one that shows up in traceroute etc... I would like to suggest instead of removing the first one and re-adding it could you make a toggle button of some sort to mark which ip addr...
by Devin
Tue May 15, 2012 1:39 am
Forum: General
Topic: Hotspot Gateway-XML Server/AAA/External Login Page
Replies: 0
Views: 749

Hotspot Gateway-XML Server/AAA/External Login Page

I am working on a Hotspot for a hampton inn. Hilton(hhonors) requires them to use their login page for hotspot: link below. Is this possible to set up in the mikrotik? I cant figure out how to use these settings. Authentication And Authorization Settings AAA Services Enabled XML Interface Enabled XM...
by Devin
Wed Jan 18, 2012 12:39 am
Forum: General
Topic: RB450G with upgrade to 5.11
Replies: 6
Views: 1354

Re: RB450G with upgrade to 5.11

Look at these. They changed what shows up in 5.11. Both are captures of an RB450G board (2 different ones) you can see what version of RoS I'm running RB450G w/ RoS 5.11 http://i39.tinypic.com/357g3kx.jpg RB450G w/ RoS 5.8 http://i39.tinypic.com/os7sj9.jpg I fixed the problem. It was because my rb ...
by Devin
Wed Jan 18, 2012 12:12 am
Forum: General
Topic: RB450G with upgrade to 5.11
Replies: 6
Views: 1354

Re: RB450G with upgrade to 5.11

your screenshots look like mine on any of my routers. I'm not seeing what you are talking about. it shows default listed there, the only-hardware-queue should show none Look at your interface queues tab. Does it show Interfaces and Queue types or does it show Interfaces Queue Types and Default Queu...
by Devin
Tue Jan 17, 2012 11:56 pm
Forum: General
Topic: RB450G with upgrade to 5.11
Replies: 6
Views: 1354

Re: RB450G with upgrade to 5.11

on all my RB's, to change the queue type, I just double click on the interface, and then pick the one in the drop down. Yes, but Default Queue type is not there. It remains only-hardware-queue and the queues don't. I have only had this problem on the 450G's. It only shows interface and queue type, ...
by Devin
Tue Jan 17, 2012 11:54 pm
Forum: Beginner Basics
Topic: DNAT - SNAT more IP's
Replies: 7
Views: 3165

Re: DNAT - SNAT more IP's

Hi. I have a problem. I have assigned by the ISP ip 5. I have a Mikrotik RB333 on it first assigned to eth1 ip address and the DHCP server on it other than a set of ISP. I need to set an IP DHCP published (DNAT and SNAT) in 2-5 ip address. I tried everything possible and not to me :-( I am not exac...
by Devin
Tue Jan 17, 2012 10:59 pm
Forum: Beginner Basics
Topic: Need help routing between subnets
Replies: 6
Views: 2260

Re: Need help routing between subnets

Thanks Devin..it was Win7 firewall that stop the ICMP..It's ok now.
Hehe. Cool good deal glad that worked for ya.
by Devin
Tue Jan 17, 2012 10:57 pm
Forum: General
Topic: RB450G with upgrade to 5.11
Replies: 0
Views: 470

RB450G with upgrade to 5.11

I have updated 2 450Gs to 5.11, everything has worked fine except queues. http://is.gd/JRS9dd I have searched everywhere and cant figure out how to change the Default queue type only-hardware-queue. I can use any of these as the Tx/Rx queue types in a simple queue and it still wont work. http://is.g...
by Devin
Tue Jan 17, 2012 10:57 pm
Forum: General
Topic: RB450G with upgrade to 5.11
Replies: 6
Views: 1354

RB450G with upgrade to 5.11

I have updated 2 450Gs to 5.11, everything has worked fine except queues. http://is.gd/JRS9dd I have searched everywhere and cant figure out how to change the Default queue type only-hardware-queue. I can use any of these as the Tx/Rx queue types in a simple queue and it still wont work. http://is.g...
by Devin
Fri Dec 30, 2011 6:23 pm
Forum: Beginner Basics
Topic: Need help routing between subnets
Replies: 6
Views: 2260

Re: Need help routing between subnets

Thanks!! I did ask u suggest MTK1 IP > Routes AS 192.168.4.0/24 Gateway: 192.168.3.2 AS 192.168.6.0/24 Gateway: 192.168.3.2 MTK2 IP > Addresses IP: 192.168.3.2/24, Network: 192.168.3.0, Interface: eth1 - WAN IP > Routes AS 0.0.0.0/0 Gateway: 192.168.3.1 AS 192.168.2.0/24 Gateway: 192.168.3.1 From M...
by Devin
Wed Dec 21, 2011 4:24 pm
Forum: Beginner Basics
Topic: Need help routing between subnets
Replies: 6
Views: 2260

Re: Need help routing between subnets

-I would like to learn routing between subnets, and pratice VPN on it Here is the diagram for my little network. Both Mikrotik link by 192.168.3.X -PC1 which connect to MTK1 eth2, I wish to ping MTK2 eth2 & eth3 I added a static route 192.168.0.0/21 GW 192.168.3.1 but still could not ping 192.168.4...