Installing CHR on VPS hosting with GRUB loader Instructions are given for hosting vpsserver.com as of 2022-03-01 Hosting is distinguished by the presence of pre-installed Grub in Linux systems, the primary loader of which is loaded over the network (PXE). The user's system must therefore contain a G...

As I understood on my link with SXTsq Lite60, the problem lies in the implementation of Beamforming. At cheap devices, there is no hardware tuning, and Mikrotik implemented software tuning with an internal script. The device regularly measures the signal strength (as I understand it) and at some low...

Use Routing Rules

Changed the design of the panels in Winbox, and not for the better. Became scary and very uncomfortable. Return back, please, as it was in versions for 6.10 inclusive.

With greetings from participants forum.ixbt.com

Quite a lot of information about this modem has a forum
http://4pda.ru/forum/index.php?showtopic=315938
(russian language)

I confirm. I tried to run Huawei E352b (by russian 3G provider Megafon) on the x86 system (s775 Core E8200 & Intel P43) under ROS 6.7 and it work properly with the settings info & data channels = 0 . On my RB493G, unfortunately, I was unable to test the modem due to the lack of regular power...

Compiled and works 2WAN x86-based router Jetway NF99 (Atom D525 / 2h82574L) equipped with a daughter card AD3INLAN-G (3x82541PI) pictures . Both insertions are used as a WAN, the daughter's nic's combined bridge and used as a LAN. Distribution and receipt of about 150 Mbps real torrent traffic, as w...

No, only four active link and a regular on an Internet surfing. But even in this mode with 24V PSU uptime does not exceed several hours.
"Native" 24V PSU tried two things - with both equally unstable.
p.s. It is still checking PSU. Ahead - a study with an oscilloscope. ))

Stability test with a pulse PSU Powertron PA1008-2DE 12V/0.5A is successful. RB450G uptime 5 days.

janisk Transformer PSU used DVE DV-1250UP 12V/0.5A 450G when operating this PSU at idle consumes 0.36A with running Metarouter and 0.31A with a stopped Metarouter The problem with the electrolitic capacitors Suxxon me know :) see here and here . These capacitors from the main DC/DC converter (7...2...

the frequency of reboots of the board is not connected to PSU in any way, of course, board has to have enough resources. It was tested at full CPU load. Maybe ... However, with a 12 volt transformer PSU 450G uptime for over 5 days. However, I did not banished tests this time, but with a 24 volt PSU...

Perhaps the problem is really in miscalculations in the design of power converters on the routerboard 450G. With a standard external power supply DVE DSA-20P-20 24V/0.8A router, when running metarouter, was unstable and often restart at arbitrary times, even in idle mode. ROS 3x, 4x, 5x - no differe...