MikroTik

rocknight13

If you are using Masquarade on the router, that is the problem. When using Masquarade, RouterOS has to do full connection tracking recalculation on EACH interface connect/disconnect. So if you have lots of PPPoE session connecting/disconnecting, connection tracking will constantly be recalculated w...

rocknight13

I am not sure if this just my problem or there are anyone else face this issue
I can't rest RBLHG by reset button is there anyone can help me with this issue
I tried that many time with many units but it is simple not work
hope to get your answer soon
regards

rocknight13

Dear Sir, I am sure most of wireless interface parameters need to restart which make all users to disconnected and back to work based on new changes. but I like to ask mikrotik support team to make list for parameters which not effect on physical properties of wireless interfaces and even on Etherne...

rocknight13

Dear pe1chl, Thank you for your post. This can be solve by two way ...First....the installer or admin of network can replace POE with old POE without reset button. and 2nd solution again is as ubiquity did by check box in software which can activate or disable this feature. The Main issue is this fe...

rocknight13

Thank you very mush for share that with us marekm, Yes I agree with you most ubiquity devises loss configuration when cable damage and get some water in rain day. But, even if that happens for MikroTik devises this means no problem because it's automatically save backup file for old configuration so...

rocknight13

Dear andriys, All Ubiquity outdoor units already have this features. and you can see attached image for one of these POE units with RST button. http://s11.postimg.org/fpqdqw1f7/31_IOLhi_GSv_L.jpg Technically it is very easy but need to add electronic circuit on hardware to detect if two wires (pairs...

rocknight13

what about if you get new client and the old service provide added password to avoid access outdoor unit...?!
come on every one is there some one can support me with this logical and very required request.

rocknight13

Dear ste, I am talking about reset configuration which you need when you loss password. Even if this features is exist with POE switch which in not based on my information. I can't ask my clients to get POE switch to reset they outdoor unit. I think you confuse about remote restart and indoor reset ...

rocknight13

most of Mikrotik units become to be outdoor and they finally started they new unit LHG but till now MikroTik did not offer indoor reset button for outdoor units. I think it is not that big deal but will solve a lot problem in case you forget password. or when you deal with new client like to run his...

rocknight13

Dear picacho99... Just for your update and for your records remember these facts:- 1. In very short time MikroTik become one of the Network leaders. 2. MikroTik team is the most active and fast team with solutions and software updates. 3. I worked with a lot of network brands for last 20 years and d...

rocknight13

Hi .... I am sure Mikrotik need professional script editor that make us able to write scripts with less suffering. hope this can be done as soon as possible or it can be optional package which you can download it or not based on user needs and hope that package contains some simple linux commands li...

rocknight13

Any one can conform this issue ? I am sure there is something wrong in noise floor calculation with version 6.34 on wireless-cm2 packet. please make some testes and update this post.
regards

rocknight13

I tested last version of v6.35rc2 and same with v6.35rc5 with RB911 which working as ap bridge on band 5GHz-A/N/ac. These screen shoots with wireless-fp package http://s29.postimg.org/5um049fpz/Fp2.jpg and same unit with same time with same antenna but with wireless-cm2 package http://s17.postimg.or...

rocknight13

Please correct me if I misunderstanding Reset Counters button function in WinBox. As I think it must reset all counters at each window and that's true but it can't reset traffic tab counters as shown below http://s13.postimg.org/p5rdv9wbr/ccc.jpg is that bug or misunderstanding of Reset Counters fun...

rocknight13

thanks for your confirmation

rocknight13

Dear normis,
Please your comment for topic http://forum.mikrotik.com/viewtopic.php?f=1&t=98053
is this bug ? or there are mistake in command
regards

rocknight13

sorry it mentioned by mistake that I installed 6.20rc22 but it was 6.30rc22 as shown in title
regards

rocknight13

Dear all, I just installed new 6.20rc22 on one of SXT units and try to use new command :execute script= "WS" file= "output.txt" best after few sec I got error "Console has crashed; please log in again for more details I am adding screenshot for my SXT winbox view . anyone te...

rocknight13

I am not recommended SXT SA5 ac it came with sector antenna with wide angle that means it is not stable for PtP in 2.5KM. you can use it as AP PtmP but even for that 13dbi is not good for such distance. I recommended for you new QRT 5 ac or DynaDish 5 they are perfect for high band application. most...

rocknight13

Please paste R2 and AP1 configuration with status of all ethernet ports for both units.to find out the problem
regards

rocknight13

Dear ismets, I am not sure about your needs. but I think you asking for 1AP with 2CPE as PtmP or 2 links as 2 AP and 2 CPE as PtP. I suggestion for you QRT 5 or QRT 2 as PtP connection these are very useful for your needs I get more than 100MB upload and download throughput with these points at more...

rocknight13

normis wrote: what do you plan to do with this? if you have SMB, you can manage files from the Windows/Mac share window Dear Normis, It is not about SMB and it is not same as BartoszP wrote and he listed with thankful some of needs and I can add more :- 1. Most of needs is to menage output command ...

rocknight13

Dear All, Hope I can collect as much as possible voices to make this be true . My suggestion is to create a package(let we name it linux package or commands package) with simple commands which can deal with files and directories and adding some simple abilities like adding,editing,removing and creat...

rocknight13

Dear Clbh, file parameter is not applicable for all commands I can list more than ten commands like wireless scan . I am asking for common command or procedure can be used with all commands to send all results to a file or append exist file. as exist in linux with ">" and ">>" pl...

rocknight13

Dear Sir, This is an really old question and don't know why did not done till now ... simply why mikrotik command line not support redirect output to a file as linux command ">" to great output file or as ">>" to update exist file ? This really need all your attention mikrotik st...

rocknight13

is there anyone can support this need or take an action ?

rocknight13

I tried to design skin for webfig with Arabic language for our clients.but, unfortunately no way to make skin show language from right to lift . Arabic and many other language like Persian, Urdu and Hebrew are based on right to lift direction so please is it possible to get check box in user groups ...

rocknight13

This topic about multi parameters for some windows as shown below http://s27.postimg.org/mxk4gaeub/close_and_maximize.png it's is crowded as much as you add more ports and you can't see the options below them. I am suggestion two ways to fix this issue 1st: as below http://s29.postimg.org/9nagnu4lj/...

rocknight13

Thanks ...fixed with V. 6.23
Regards

rocknight13

Sorry, this topic is located to here by mistake
regards

rocknight13

suddenly I lose license key for my mikrotik how can I solve this issue. any solution?

regards

rocknight13

Thanks ... This clear every thing
regards

rocknight13

Hi normis, Thanks for joining to this issue . I am discussion with two issue here :- 1. It will be so nice if show default-name of port in winbox. 2. I faced mess ports configuration when try to transfer backup file from CCR1036-12G-4S to CCR1036-8G-2S+ . so I was asking dose mikrotik depends on def...

rocknight13

Sorry I did not get you. do you mean that transfer configuration between two different routers based on port name ? do you mean changing names of port to default name before backup will ensure to keep the port identical in both said. is that true I think configuration must based on default-name and ...

rocknight13

Thanks friction, finally I got logical answer. I did not know that there is default-name for ports. so it will be great if some one ask mikrotik support to show this field on winbox at port windows title or as field on General tab as default-name. So, my next question why when transfer configuration...

rocknight13

yes. we can keep the default name and write what you like on comment but it will be nice if we can get both in one field. it will be more clear and more organized for me .
regards

rocknight13

Hi all ... This post maybe will be fantasy for some but I like to make everything in mikrotik perfect specially with winbox. There is a bugs in winbox windows title specially when title become longer than window's width as you can see below http://s3.postimg.org/72wkym66b/close_and_maximize.png The ...

rocknight13

I was thinking about this issue many time when follow my cables to which and where it is goes. as every body know anyone can change the ports name to something you understand it or refer to something you like to check it. my suggestion is it will be great idea if we get physical name for each port t...

rocknight13

I already tested the v6.20 unfortunately we can't find any new feature for pppoe-server nor bridge. but with console i can found auto with MTU. hope they can fix that for next update
regards

rocknight13

Thanks for your replay.... simply i need to configure RB250GS as simply uplink port :- 1. port 1 connected to all ports 2. all traffic among ports must be disabled. in other world all ports connected to port 1 and there must be isolation between other ports simple this can be done be bridge and filt...

rocknight13

is there someone can configure RB250GS as uplink port switch. we don't need to make that with bridge and filters rules. we need to use switch abilities in this item.
any one ?

rocknight13

Is there some way to use RB250GS with one up-link port. all ports to one port and just only that one port
best regards

rocknight13

Dear Jarda...
can you please write the best configuration for CCRs switch to do that ?
best regards

rocknight13

Thanks Jarda for your suggestion . So you think I must use core36 router for such simple needs . and I am going to do that by bridge ports I think this is slow and make every thing goes to use more CPU is there nay other suggestions please I will make diagram below to make it more simple 155.254.153...

rocknight13

Hi all... This is a classic question but I need professional answer assume I have range public IPs like 155.254.153.xx/27 and need a best Mikrotik hardware (with 24 or 10 ports like RB2011 or CRS125-24G-1S-IN) and best configuration to distribute the service with these IPs to clients without any NAT...

Search found 45 matches